Multi-cavity coupling acoustic metamaterials with low-frequency broad band gaps based on negative mass density

2016 ◽  
Vol 30 (23) ◽  
pp. 1650317
Author(s):  
Chuanhui Yang ◽  
Jiu Hui Wu ◽  
Songhua Cao ◽  
Li Jing
Keyword(s):  
Band Gap ◽  
Mass Density ◽  
Resonant Cavity ◽  
Broad Band ◽  
Low Frequency ◽  
Band Gaps ◽  
Acoustic Metamaterials ◽  
Negative Mass ◽  
Closed Cavity ◽  
Cavity Coupling

This paper studies a novel kind of low-frequency broadband acoustic metamaterials with small size based on the mechanisms of negative mass density and multi-cavity coupling. The structure consists of a closed resonant cavity and an open resonant cavity, which can be equivalent to a homogeneous medium with effective negative mass density in a certain frequency range by using the parameter inversion method. The negative mass density makes the anti-resonance area increased, which results in broadened band gaps greatly. Owing to the multi-cavity coupling mechanism, the local resonances of the lower frequency mainly occur in the closed cavity, while the local resonances of the higher frequency mainly in the open cavity. Upon the interaction between the negative mass density and the multi-cavity coupling, there exists two broad band gaps in the range of 0–1800 Hz, i.e. the first-order band gap from 195 Hz to 660 Hz with the bandwidth of 465 Hz and the second-order band gap from 1157 Hz to 1663 Hz with the bandwidth of 506 Hz. The acoustic metamaterials with small size presented in this paper could provide a new approach to reduce the low-frequency broadband noises.

scholarly journals Band Gaps and Vibration Isolation of a Three-dimensional Metamaterial with a Star Structure

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3812 ◽  
Author(s):  
Heng Jiang ◽  
Mangong Zhang ◽  
Yu Liu ◽  
Dongliang Pei ◽  
Meng Chen ◽  
...  
Keyword(s):  
Band Gap ◽  
Vibration Isolation ◽  
Dynamic Properties ◽  
Structural Parameters ◽  
Mass Density ◽  
Three Dimensional ◽  
Low Frequency ◽  
Band Gaps ◽  
Acoustic Metamaterials ◽  
Star Structure

Elastic metamaterials have promising applications in wave control and vibration isolation, due to their extraordinary characteristics, e.g., negative Poisson ratio, band gaps, effective negative mass density and effective negative modulus. How to develop new functional metamaterials using a special structure has always been a hot topic in this field. In this study, a three-dimensional (3D) star structure is designed to construct metamaterials with both negative static and dynamic properties. The results show that the 3D star structure formed a wide band gap at lower frequency and had a negative Poisson’s ratio. Different from conventional acoustic metamaterials, the main physical mechanism behind the low-frequency band gap of the 3D star structure is the resonance mode formed by the bending deformation of each rib plate, which made it easier to achieve effective isolation of low-frequency elastic waves with a low mass density. In addition, many structural parameters of the 3D star structure can be modulated to effectively adjust the band gap frequency by changing the angle between the concave nodes and aspect ratio. This study provides a new way to design the 3D acoustic metamaterials and develop the lightweight vibration isolation devices.

Research on local resonance and Bragg scattering coexistence in phononic crystal

2017 ◽  
Vol 31 (11) ◽  
pp. 1750127 ◽  
Author(s):  
Yake Dong ◽  
Hong Yao ◽  
Jun Du ◽  
Jingbo Zhao ◽  
Jiulong Jiang
Keyword(s):  
Band Gap ◽  
Mass Density ◽  
Resonance Effect ◽  
Phononic Crystal ◽  
Broad Band ◽  
Low Frequency ◽  
Bragg Scattering ◽  
Low Frequencies ◽  
Local Resonance ◽  
Resonance Band

Based on the finite element method (FEM), characteristics of the local resonance band gap and the Bragg scattering band gap of two periodically-distributed vibrator structures are studied. Conditions of original anti-resonance generation are theoretically derived. The original anti-resonance effect leads to localization of vibration. Factors which influence original anti-resonance band gap are analyzed. The band gap width and the mass ratio between two vibrators are closely correlated to each other. Results show that the original anti-resonance band gap has few influencing factors. In the locally resonant structure, the Bragg scattering band gap is found. The mass density of the elastic medium and the elasticity modulus have an important impact on the Bragg band gap. The coexistence of the two mechanisms makes the band gap larger. The band gap covered 90% of the low frequencies below 2000 Hz. All in all, the research could provide references for studying the low-frequency and broad band gap of phononic crystal.

scholarly journals Investigation on the Band Gap and Negative Properties of Concentric Ring Acoustic Metamaterial

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Meng Chen ◽  
Dan Meng ◽  
Heng Jiang ◽  
Yuren Wang
Keyword(s):  
Band Gap ◽  
Effective Mass ◽  
Coupling Effect ◽  
Mass Density ◽  
Band Gaps ◽  
Acoustic Metamaterials ◽  
Concentric Ring ◽  
Resonance Modes ◽  
Negative Effective Mass ◽  
Single Oscillator

The acoustic characteristics of 2D single-oscillator, dual-oscillator, and triple-oscillator acoustic metamaterials were investigated based on concentric ring structures using the finite element method. For the single-oscillator, dual-oscillator, and triple-oscillator models investigated here, the dipolar resonances of the scatterer always induce negative effective mass density, preventing waves from propagating in the structure, thus forming the band gap. As the number of oscillators increases, relative movements between the oscillators generate coupling effect; this increases the number of dipolar resonance modes, causes negative effective mass density in more frequency ranges, and increases the number of band gaps. It can be seen that the number of oscillators in the cell is closely related to the number of band gaps due to the coupling effect, when the filling rate is of a certain value.

scholarly journals Composite 3D-printed metastructures for low-frequency and broadband vibration absorption

2016 ◽  
Vol 113 (30) ◽  
pp. 8386-8390 ◽  
Author(s):  
Kathryn H. Matlack ◽  
Anton Bauhofer ◽  
Sebastian Krödel ◽  
Antonio Palermo ◽  
Chiara Daraio
Keyword(s):  
Band Gap ◽  
Low Frequency ◽  
Band Gaps ◽  
Acoustic Metamaterials ◽  
Structural Vibrations ◽  
Band Gap Engineering ◽  
Vibration Absorption ◽  
Shock Mitigation ◽  
Lattice Geometry ◽  
3D Printed

Architected materials that control elastic wave propagation are essential in vibration mitigation and sound attenuation. Phononic crystals and acoustic metamaterials use band-gap engineering to forbid certain frequencies from propagating through a material. However, existing solutions are limited in the low-frequency regimes and in their bandwidth of operation because they require impractical sizes and masses. Here, we present a class of materials (labeled elastic metastructures) that supports the formation of wide and low-frequency band gaps, while simultaneously reducing their global mass. To achieve these properties, the metastructures combine local resonances with structural modes of a periodic architected lattice. Whereas the band gaps in these metastructures are induced by Bragg scattering mechanisms, their key feature is that the band-gap size and frequency range can be controlled and broadened through local resonances, which are linked to changes in the lattice geometry. We demonstrate these principles experimentally, using advanced additive manufacturing methods, and inform our designs using finite-element simulations. This design strategy has a broad range of applications, including control of structural vibrations, noise, and shock mitigation.

Topological optimization of hierarchical honeycomb acoustic metamaterials for low-frequency extreme broad band gaps

2022 ◽  
Vol 188 ◽  
pp. 108579
Author(s):  
Pei Sun ◽  
Zhendong Zhang ◽  
Hui Guo ◽  
Ningning Liu ◽  
Wenchao Jin ◽  
...  
Keyword(s):  
Broad Band ◽  
Low Frequency ◽  
Band Gaps ◽  
Topological Optimization ◽  
Acoustic Metamaterials

Viscoelastic multi-resonator mechanism for broadening low-frequency band-gap of acoustic metamaterials

2019 ◽  
Vol 86 (1) ◽  
pp. 10901 ◽  
Author(s):  
Hongxing Liu ◽  
Jiu Hui Wu
Keyword(s):  
Elastic Modulus ◽  
Band Gap ◽  
Frequency Band ◽  
Loss Modulus ◽  
Great Influence ◽  
Low Frequency ◽  
Band Gaps ◽  
Band Width ◽  
Acoustic Metamaterials ◽  
Practical Applications

In this paper, viscoelastic multi-resonator mechanism for broadening low-frequency band-gaps of acoustic metamaterials is investigated. Firstly, the metamaterial unit consists of dual-mass and dual-viscoelasticity is proposed which can generate multiple resonances to form multiple band-gaps, and further the broadened band-gaps are realized by modulating the effect of the viscoelasticity. Secondly, for the dual-viscoelasticity, the band-gaps and transmission spectrum under the cases of with the consistent and inconsistent viscoelasticity are calculated. Comparing with the consistent case, by adjusting the viscoelasticity in the inconsistent case, the storage modulus changes the fastest and obtains a smaller and a larger elastic modulus at the corresponding starting frequency and ending frequency of the band-gap, in which the band-gap can be broadened and shifted to the low frequency since the resonant frequency is determined by the elastic modulus, and for the loss modulus, it has little effects on the width of the band-gap, but has great influence on the transmission coefficient. Thirdly, by adjusting the inconsistent viscoelastic parameters based on the above rules, the band width is increased by 1.7 times (1.3 times for the absolute band width) than the consistent structure and the band-gap is shifted to the low frequency by 31% (about 345 Hz). The viscoelastic multi-resonator mechanism can be used to practical applications of viscoelastic metamaterials.

scholarly journals Phononic Band Gaps of Elastic Periodic Structures: A Homogenization Theory Study

2007 ◽  
Author(s):  
Ying-Hong Liu ◽  
Chien C. Chang ◽  
Ruey-Lin Chern ◽  
C. Chung Chang
Keyword(s):  
Elastic Constants ◽  
Periodic Structures ◽  
Mass Density ◽  
Density Ratio ◽  
Low Frequency ◽  
Phononic Crystals ◽  
Band Gaps ◽  
Homogenization Theory ◽  
Dominant Factor ◽  
Phononic Band Gaps

In this study, we investigate band structures of phononic crystals with particular emphasis on the effects of the mass density ratio and of the contrast of elastic constants. The phononic crystals consist of arrays of different media embedded in a rubber or epoxy. It is shown that the density ratio rather than the contrast of elastic constants is the dominant factor that opens up phononic band gaps. The physical background of this observation is explained by applying the theory of homogenization to investigate the group velocities of the low-frequency bands at the center of symmetry Γ.

Wave propagation in acoustic metamaterials with resonantly shunted cross-shape piezos

2018 ◽  
Vol 29 (13) ◽  
pp. 2744-2753 ◽  
Author(s):  
Shengbing Chen
Keyword(s):  
Wave Propagation ◽  
Band Gap ◽  
Vibration Isolation ◽  
Band Gaps ◽  
Acoustic Metamaterials ◽  
Resonant Frequencies ◽  
Piezoelectric Patch ◽  
Transmission Properties ◽  
Gap Width ◽  
Band Gap Width

Cross-shape piezoelectric patches were originally proposed to improve the band-gap properties of acoustic metamaterials with shunting circuits. The dispersion curves are characterized through the application of finite element method. Also, the theoretical band-gap predictions are verified by simulation results obtained from COMSOL. The investigation results show that the proposed scheme distinguishes itself from the conventional square patches by broader band gaps, whose bandwidth is almost doubled. The inherent capacitance of the piezoelectric patch is strongly related to the boundary conditions, so the local resonant band gap is strongly affected by the shape of piezoelectric patches as well. As a result, the band-gap width and location of metamaterials with different shape patches are rather different, even with the same size patches. Also, negative modulus (NM) and Poisson’s ratio were observed around the resonant frequencies. The transmission properties of finite periods agree well with band-gap predictions. An obvious attenuation zone (AZ) is produced around the band-gap location, in which the wave propagation is decayed strongly. Similarly, the width of AZ of the proposed metamaterial is much larger than that of the conventional one. Hence, the proposed scheme demonstrates more advantages in the application to vibration isolation when compared with the conventional.

Band Gap Control in an Active Elastic Metamaterial With Negative Capacitance Piezoelectric Shunting

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
Y. Y. Chen ◽  
G. L. Huang ◽  
C. T. Sun
Keyword(s):  
Band Gap ◽  
Elastic Waves ◽  
Low Frequency ◽  
Lattice System ◽  
Band Gaps ◽  
Negative Capacitance ◽  
Bending Waves ◽  
Stiffness Constant ◽  
Elastic Metamaterials ◽  
Gap Control

Elastic metamaterials have been extensively investigated due to their significant effects on controlling propagation of elastic waves. One of the most interesting properties is the generation of band gaps, in which subwavelength elastic waves cannot propagate through. In the study, a new class of active elastic metamaterials with negative capacitance piezoelectric shunting is presented. We first investigated dispersion curves and band gap control of an active mass-in-mass lattice system. The unit cell of the mass-in-mass lattice system consists of the inner masses connected by active linear springs to represent negative capacitance piezoelectric shunting. It was demonstrated that the band gaps can be actively controlled and tuned by varying effective stiffness constant of the linear spring through appropriately selecting the value of negative capacitance. The promising application was then demonstrated in the active elastic metamaterial plate integrated with the negative capacitance shunted piezoelectric patches for band gap control of both the longitudinal and bending waves. It can be found that the location and the extent of the induced band gap of the elastic metamaterial can be effectively tuned by using shunted piezoelectric patch with different values of negative capacitance, especially for extremely low-frequency cases.

Characteristics of Band Gap and Low-frequency Wave Propagation of Mechanically Tunable Phononic Crystals with Scatterers in Periodic Porous Elastomeric Matrices

2021 ◽  
pp. 1-34
Author(s):  
Shaowu Ning ◽  
Dongyang Chu ◽  
Fengyuan Yang ◽  
Heng Jiang ◽  
Zhanli Liu ◽  
...  
Keyword(s):  
Wave Propagation ◽  
Coupling Effect ◽  
Low Frequency ◽  
Phononic Crystals ◽  
Band Gaps ◽  
Dynamic Responses ◽  
Acoustic Metamaterials ◽  
Frequency Wave ◽  
Strong Coupling Effect ◽  
The Matrix

Abstract The characteristics of passive responses and fixed band gaps of phononic crystals (PnCs) limit their possible applications. For overcoming this shortcoming, a class of tunable PnCs comprised of multiple scatterers and soft periodic porous elastomeric matrices are designed to manipulate the band structures and directionality of wave propagation through the applied deformation. During deformation, some tunable factors such as the coupling effect of scatterer and hole in the matrix, geometric and material nonlinearities, and the rearrangement of scatterer are activated by deformation to tune the dynamic responses of PnCs. The roles of these tunable factors in the manipulation of dynamic responses of PnCs are investigated in detail. The numerical results indicate that the tunability of the dynamic characteristic of PnCs is the result of the comprehensive function of these tunable factors mentioned above. The strong coupling effect between the hole in the matrix and the scatterer contributes to the formation of band gaps. The geometric nonlinearity of matrix and rearrangement of scatterer induced by deformation can simultaneously tune the band gaps and the directionality of wave propagation. However, the matrix's material nonlinearity only adjusts the band gaps of PnCs and does not affect the directionality of wave propagation in them. The research extends our understanding of the formation mechanism of band gaps of PnCs and provides an excellent opportunity for the design of the optimized tunable PnCs and acoustic metamaterials.

Sign in / Sign up

Export Citation Format

Share Document