Performance and Analysis of Transmultiplexers Using Decimator and Interpolator

2018 ◽  
Vol 28 (01) ◽  
pp. 1950009 ◽  
Author(s):  
S. Arunkumar ◽  
P. Ganesh Kumar
Keyword(s):  
Filter Design ◽  
Stop Band ◽  
Digital Signal ◽  
Sampling Frequency ◽  
Consumer Electronics ◽  
Pass Band ◽  
Interpolation Filters ◽  
Sampled Signal ◽  
And Performance ◽  
Different Parts

This paper deals with the smart applications of multirate digital signal processing. The two major operations are accomplished in consumer electronics and communication engineering. The process of reducing the sampling frequency of a sampled signal is called decimation. In the usage of decimating filters, only a portion of the out-of-pass band frequencies aliases into the pass band, in systems wherein different parts operate at different sample rates. A filter design, tuned to the aliasing frequencies all of which can otherwise stealth into the pass band, not only provides multiple stop bands but also exhibits computational efficiency and performance superiority over the single stop band design. The proposed method of transmultiplexer using decimation and interpolation filters analysis procedure is not only efficient but also opens up a new vista of being simple and elegant to compute for the desired over and above transmultiplexer.

Digital Stable IIR Band Pass Filter Design Using Seeker Optimization Technique

2014 ◽  
Vol 905 ◽  
pp. 406-410 ◽  
Author(s):  
S.K. Saha ◽  
Rajib Kar ◽  
D. Mandal ◽  
S.P. Ghoshal
Keyword(s):  
Filter Design ◽  
Fitness Function ◽  
Stop Band ◽  
Infinite Impulse Response ◽  
Pass Band ◽  
Band Pass Filter ◽  
Pass Filter ◽  
Iir Filter ◽  
Real Coded Genetic Algorithm ◽  
Band Pass

This paper presents a novel, control parameter independent evolutionary search technique known as Seeker Optimization Algorithm (SOA) for the design of a eighth order Infinite Impulse Response (IIR) Band Pass (BP) filter. A new fitness function has also been adopted in this paper to improve the stop band attenuation to a great extent. The performance of the SOA based IIR BP filter design has proven to be much superior as compared to those obtained by real coded genetic algorithm (RGA) and standard particle swarm optimization (PSO) in terms of highest sharpness at cut-off, smallest pass band ripple, highest stop band attenuation, smallest stop band ripple and also the fastest convergence speed with assured stability recognized by the pole-zero analysis of the designed optimized IIR filter.

scholarly journals FPGA Based Performance Analysis of Multistage CIC Decimation Filter Design with former CIC Filter for WiMAX Applications

2019 ◽  
Vol 8 (6) ◽  
pp. 5084-5089
Keyword(s):  
Frequency Response ◽  
Filter Design ◽  
Stop Band ◽  
Pass Band ◽  
Two Stage ◽  
Simulink Model ◽  
Cic Filter ◽  
Decimation Filter ◽  
Two Stages ◽  
Kaiser Window

The motto of this paper is to design and realize decimation filter using CIC filter. The main drawback of this filter is there is large droop in pass band and very less attenuation in stop band. So, to improve the frequency response of CIC filter we go for two stage realization of CIC filter. At the initial stage we use CIC filter and in the last stage we use Kaiser Window and improve the characteristics of filter design. When we design a filter using multistage methodology the order of the filter as well as power also decreases. Tools used are MATLAB Simulink Model and Xilinx system generator and realization is done on Virtex V-XC5VLX110T-3ff136. In this paper the proposed two stage realization is compared with respect to two stages Kaiser window realization in the terms of number of LUT’s required, slices as well as power dissipation and improvements in frequency response with respect to conventional CIC filter are compared

scholarly journals Moth Flame Optimization Algorithm for Optimal FIR Filter Design

2021 ◽  
Vol 13 (5) ◽  
pp. 24-34
Author(s):  
Zainab Muhammad Adamu ◽  
◽  
Emmanuel Gbenga Dada ◽  
Stephen Bassi Joseph
Keyword(s):  
Particle Swarm Optimization ◽  
Filter Design ◽  
Stop Band ◽  
Particle Swarm ◽  
Fir Filter ◽  
Pass Band ◽  
Transition Width ◽  
Swarm Optimization ◽  
Fitness Value ◽  
Fir Filter Design

This paper presents the application of Moth Flame optimization (MFO) algorithm to determine the best impulse response coefficients of FIR low pass, high pass, band pass and band stop filters. MFO was inspired by observing the navigation strategy of moths in nature called transverse orientation composed of three mathematical submodels. The performance of the proposed technique was compared to those of other well-known high performing optimization techniques like techniques like Particle Swarm Optimization (PSO), Novel Particle Swarm Optimization (NPSO), Improved Novel Particle Swarm Optimization (INPSO), Genetic Algorithm (GA), Parks and McClellan (PM) Algorithm. The performances of the MFO based designed optimized FIR filters have proved to be superior as compared to those obtained by PSO, NPSO, INPSO, GA, and PM Algorithm. Simulation results indicated that the maximum stop band ripples 0.057326, transition width 0.079 and fitness value 1.3682 obtained by MFO is better than that of PSO, NPSO, INPSO, GA, and PM Algorithms. The value of stop band ripples indicated the ripples or fluctuations obtained at the range which signals are attenuated is very low. The reduced value of transition width is the rate at which a signal changes from either stop band to pass band of a filter or vice versa is very good. Also, small fitness value in an indication that the values of the control variable of MFO are very near to its optimum solutions. The proposed design technique in this work generates excellent solution with high computational efficiency. This shows that MFO algorithm is an outstanding technique for FIR filter design.

scholarly journals Optical narrow band filter without resonance's

2004 ◽  
Vol 17 (2) ◽  
pp. 209-217 ◽  
Author(s):  
Crassen Hruschka ◽  
Udo Barabas ◽  
Lutz Gohler
Keyword(s):  
Filter Design ◽  
Finite Impulse Response ◽  
Stop Band ◽  
Pass Band ◽  
Material System ◽  
Optical Wave ◽  
Transversal Filters ◽  
Narrow Band Filter ◽  
Wave Filter ◽  
Impulse Response Filter

This paper introduces an optical wave filter, which uses gratings at 45? or 135? inclined grating lines that avoid any resonance's. Therefore, many more options to form the filter shape exist. In general, the filter design can be traced to that of transversal filters (finite impulse response filter, FIR filter). Such an integrated optical wave filter is characterized by steep filter slopes and a narrow pass band (less then 01nm) combined with a high stop band attenuation (more than 40dB) and a linear phase response in the pass band. Compared to conventional Bragg grating filters, the inclined grating line filters can have a flatter pass band and steeper filter skirts related to the width of the pass band. In general, the filter's realization is possible using any optical material. In view of the excellent optical properties the semiconductor material system InP/InGaAsP is used for manufacturing the filter.

Study on Common Ground Testing Platform Technology for Telemetry Core Equipment

2012 ◽  
Vol 220-223 ◽  
pp. 1472-1475
Author(s):  
Qiu Lin Tan ◽  
Xiang Dong Pei ◽  
Si Min Zhu ◽  
Ji Jun Xiong
Keyword(s):  
Data Exchange ◽  
Common Ground ◽  
Digital Signal ◽  
Test System ◽  
Automatic Test System ◽  
Module Design ◽  
The Status ◽  
Output Module ◽  
And Performance ◽  
Hardware Circuit

On the basis of automatic test system of the status in domestic and foreign, by analysis of the various functions and performance of the integrated test system, a design of the integrated test system is proposed, FPGA as the core logic controller of the hardware circuit. The system of the hardware design include: digital signal source output modules, analog output module and PCM codec module. Design of hardware circuit are mainly described. In addition, a detailed analysis of some key technologies in the design process was given. Overall, its data exchange with host computer is through the PCI card, data link and bandwidth can be expanded in accordance with the actual needs. The entire system designed in the modular principle, which has a strong scalability.

scholarly journals Low-Frequency Signal Sampling Method Implemented in a PLC Controller Dedicated to Applications in the Monitoring of Selected Electrical Devices

Electronics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 442
Author(s):  
Marcin Jaraczewski ◽  
Ryszard Mielnik ◽  
Tomasz Gębarowski ◽  
Maciej Sułowicz
Keyword(s):  
Power System ◽  
Reactive Power ◽  
Low Frequency ◽  
Sampling Frequency ◽  
Electrical Signal ◽  
Distortion Factor ◽  
Electrical Devices ◽  
Frequency Sampling ◽  
Sampled Signal ◽  
Band Limited

High requirements for power systems, and hence for electrical devices used in industrial processes, make it necessary to ensure adequate power quality. The main parameters of the power system include the rms-values of the current, voltage, and active and reactive power consumed by the loads. In previous articles, the authors investigated the use of low-frequency sampling to measure these parameters of the power system, showing that the method can be easily implemented in simple microcontrollers and PLCs. This article discusses the methods of measuring electrical quantities by devices with low computational efficiency and low sampling frequency up to 1 kHz. It is not obvious that the signal of 50–500 Hz can be processed using the sampling frequency of fs = 47.619 Hz because it defies the Nyquist–Shannon sampling theorem. This theorem states that a reconstruction of a sampled signal is only guaranteed possible for a bandlimit fmax < fs, where fmax is the maximum frequency of a sampled signal. Therefore, theoretically, neither 50 nor 500 Hz can be identified by such a low-frequency sampling. Although, it turns out that if we have a longer period of a stable multi-harmonic signal, which is band-limited (from the bottom and top), it allows us to map this band to the lower frequencies, thus it is possible to use the lower sampling ratio and still get enough precise information of its harmonics and rms value. The use of aliasing for measurement purposes is not often used because it is considered a harmful phenomenon. In our work, it has been used for measurement purposes with good results. The main advantage of this new method is that it achieves a balance between PLC processing power (which is moderate or low) and accuracy in calculating the most important electrical signal indicators such as power, RMS value and sinusoidal-signal distortion factor (e.g., THD). It can be achieved despite an aliasing effect that causes different frequencies to become indistinguishable. The result of the research is a proposal of error reduction in the low-frequency measurement method implemented on compact PLCs. Laboratory tests carried out on a Mitsubishi FX5 compact PLC controller confirmed the correctness of the proposed method of reducing the measurement error.

Time-Domain Matrix Analysis of Polyphase FIR Filters

2012 ◽  
Vol 49 (3) ◽  
pp. 275-290
Author(s):  
Eric J. Balster ◽  
Francis D. Fradette ◽  
Frank A. Scarpino ◽  
Kerry L. Hill
Keyword(s):  
Time Domain ◽  
Filter Design ◽  
Digital Signal ◽  
Time Domain Analysis ◽  
Discrete Systems ◽  
Domain Analysis ◽  
Matrix Analysis ◽  
Student Survey ◽  
Z Domain ◽  
Polyphase Filters

Polyphase filter design is a common subject studied in discrete systems analysis and digital signal processing (DSP) courses. However, the classic z-domain analysis, utilizing the noble identities, gives a conclusion to the true physical structures of polyphase filters which may not be obvious to many students. The proposed time-domain analysis provides a more straightforward development of polyphase implementation of interpolation and decimation functions, and hopes to provide students with a more visual representation of the polyphase interpolation and decimation processes. Results from a student survey show that over 73% of students believe that the proposed polyphase analysis strengthened their understanding of polyphase filters, and over 71% would prefer to use the proposed method over the traditional z-domain analysis when explaining polyphase filters to others.

Novel Low-Pass Microwave Filter Based on Rectangular Ring DGS

2013 ◽  
Vol 273 ◽  
pp. 371-374
Author(s):  
Bao Ping Li ◽  
Yan Liang Zhang
Keyword(s):  
Stop Band ◽  
Center Frequency ◽  
Pass Band ◽  
Band Pass Filter ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Compact Size ◽  
Low Pass

Due to the frequency response periodicity of distributed transmission line, microstrip band-pass filter usually produces parasitic pass-band and outputs harmonics away from the center frequency of main pass-band. Based on the study of rectangular ring defected ground structure, a 5-order microstrip LPF(low-pass filter) was designed using the single-pole band-stop and slow-wave characteristics of the rectangular ring DGS(Defected Ground Structure) and SISS(Step-Impedance Shunt Stub) structure. Compared with traditional LPF, this LPF presents the advantages of compact size, low insertion loss, broad stop-band and high steep. It also validates the requirements of miniaturization and high performance for filters.

Design and Simulation of Switched Capacitor Filter for Speed Change Parameter Converter

2013 ◽  
Vol 562-565 ◽  
pp. 1132-1136
Author(s):  
Xiao Wei Liu ◽  
Jian Yang ◽  
Song Chen ◽  
Liang Liu ◽  
Rui Zhang ◽  
...  
Keyword(s):  
Stop Band ◽  
Cutoff Frequency ◽  
Rapid Change ◽  
Pass Band ◽  
Cmos Process ◽  
Switched Capacitor ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Low Pass ◽  
The Time Domain

In this paper, we design a high-order switched capacitor filter for rapid change parameter converter. This design uses a structure which consists of three biquads filter sub-units. The design is a 6th-order SC elliptic low-pass filter, and the sample frequency is 250 kHz. By the MATLAB Simulink simulation, the system can meet the design requirements in the time domain. In this paper, the 6th-order switched capacitor elliptic low-pass filter was implemented under 0.5 um CMOS process and simulated in Cadence. The final simulation results show that the pass-band cutoff frequency is 10 kHz, and the maximum pass-band ripple is about 0.106 dB. The stop-band cutoff frequency is 20 kHz, and the minimum stop-band attenuation is 74.78 dB.

scholarly journals Application of Defected Ground Structure to Suppress Out-of-Band Harmonics for WLAN Microstrip Antenna

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Pravin Ratilal Prajapati
Keyword(s):  
Microstrip Antenna ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Filter Design ◽  
Stop Band ◽  
Local Area ◽  
Area Network ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Cst Microwave Studio

An application of defected ground structure (DGS) to reduce out-of-band harmonics has been presented. A compact, proximity feed fractal slotted microstrip antenna for wireless local area network (WLAN) applications has been designed. The proposed 3rd iteration reduces antenna size by 43% as compared to rectangular conventional antenna and by introducing H shape DGS, the size of an antenna is further reduced by 3%. The DGS introduces stop band characteristics and suppresses higher harmonics, which are out of the band generated by 1st, 2nd, and 3rd iterations. H shape DGS is etched below the 50 Ω feed line and transmission coefficient parameters (S21) are obtained by CST Microwave Studio software. The values of equivalent L and C model have been extracted using a trial version of the diplexer filter design software. The stop band characteristic of the equivalent LC model also has been simulated by the Advance Digital System software, which gives almost the same response as compared to the simulation of CST Microwave Studio V. 12. The proposed antenna operates from 2.4 GHz to 2.49 GHz, which covers WLAN band and has a gain of 4.46 dB at 2.45 GHz resonance frequency.

Sign in / Sign up

Export Citation Format

Share Document