QUALITY SYSTEM FOR PRODUCTION SOFTWARE (QSPS): AN INNOVATIVE APPROACH TO IMPROVE THE QUALITY OF PRODUCTION SOFTWARE

2013 ◽  
Vol 23 (08) ◽  
pp. 1061-1083
Author(s):  
C. V. KIFOR ◽  
N. TUDOR ◽  
LAL MOHAN BARAL
Keyword(s):  
Quality Management ◽  
Software Quality ◽  
Quality Management System ◽  
Quality System ◽  
Cost Evaluation ◽  
Mathematical Representation ◽  
Practical Application ◽  
Use Of Resources ◽  
Production Software

A quality system for production software should be part of the quality management system of an organization and can be expressed as objectives in the form of processes, procedures, tools and responsibilities, designed and developed to fulfil the quality requirements. These usually are addressing the customers (external or internal), compliance with standards (effectiveness) waste reduction and better use of resources (efficiency) for continual improvement. Such systems are designed according to the requirements of the standards for quality management, software engineering and information security. Quality systems themselves could not provide all necessary means for driving the organization to the quality and excellence of a product. Still there are some gaps in the processes which are not covered by too generic standards and it is the organizational ability to cover the gaps in an appropriate way. The aim of this paper is to examine the effectiveness of our proposed conceptual QSPS model to reduce the gaps in the processes of an organization by enhancing the quality of production software. In order to achieve that goal, a mathematical representation of QSPS has been derived and an evaluation has been realized among different software quality methods. The reliability and validity of the QSPS has been examined through the practical application to the automotive industry considering the elements like: (i) Planning, time and cost evaluation (ii) Software requirements (management, risk, quality and security) (iii) Validation and verification of the implemented software before release (iv) Internal release of the software (v) Client release of the software (vi) Functional monitoring after release in the production and continuous improvement process (vii) Customer satisfaction. The results of mathematical simulation and practical application revealed that the proposed QSPS model showed superior phenomena compared with other known software quality methods and also expressed significant advantages, while using it on the production software. So, an effective application of QSPS would result in the smooth running of the production software to get a high quality product according to customer and standard requirements.

scholarly journals The Quality Management System of Additional Professional Education in Higher Educational Institution on the Basis of a Standard Quality System

2019 ◽  
Vol 297 ◽  
pp. 06010
Author(s):  
Albert Simkin ◽  
Tatyana Mozhaeva ◽  
Alexander Proskurin
Keyword(s):  
Higher Education ◽  
Quality Management ◽  
Russian Federation ◽  
Professional Education ◽  
Management System ◽  
Quality Management System ◽  
Quality System ◽  
The Russian Federation ◽  
The Creation

The strategic goal of the state policy of the Russian Federation concerning education is to ensure the quality of functioning of additional professional education (APE) as means of social development, and in this regard, the creation of a modern system of continuous education, i.e. the implementation of the concept of lifelong learning. The solution of this problem is possible on the basis of the development and integration into the overall management system of the educational organization of the quality management system (QMS) of additional professional education, taking into account the specifics of this type of activity. The paper is proposed to develop the QMS of APE of higher education on the basis of a standard model of quality system proposed in 2006 by a consortium of representatives of educational institutions of secondary vocational and higher education of the Russian Federation. The creation of quality systems of educational organizations on the basis of the model of QMS of OO considered in the article, adapted to the specifics of APE will contribute to the creation of conditions for ensuring the quality of training of students of professional educational programs.

MODEL MANAJEMEN MUTU MADRASAH KAJIAN DI MIN & MI MA’RIF PAGERAJI PURWOKERTO

2018 ◽  
Vol 19 (1) ◽  
pp. 74-105
Author(s):  
Rohmat Rohmat
Keyword(s):  
Quality Management ◽  
Quality Management System ◽  
Management Model ◽  
Teacher Competence ◽  
Model Quality ◽  
Community Environment ◽  
The Family ◽  
Quality Management Model ◽  
Community Cooperation

Abstract: The quality of madrasah education needs to get serious attention both from process aspect and its result. The quality of madrasah education is also influenced by the family and community environment. This brings with it the need for a review and mapping of the quality management model of education in Madrasah Ibtidaiyah. The Madrasah Ibtidaiyah of Purwokerto and MI Ma'arif Pageraji Purwokerto were chosen to be the subject of this study with the consideration that the school has a good quality management system. This study aims to find the typology of quality management education in MI that is effective so that it can be replicated. Based on the findings of the data, it can be concluded as follows: (1) Quality planning conducted in MIN and MI Ma’arif pageraji Purwokerto through (a) improvement of teacher competence, through OJT activity (on the job trainning), (b) teacher. (c) Development of natural competence matrix. (d) Parent and community cooperation in establishing some madrasah programs. (2) Quality control system conducted in MIN and MI Ma’arif pageraji Purwokerto done through supervision activities. (3) Quality assurance conducted in MIN and MI Ma’arif pageraji Purwokerto done internally by madrasah and audited through accreditation activities run by the accreditation bodies of madrasah or other institutions externally. Keywords: Management model, quality of madrasah.

Development of a Quality Manual for Radioisotope Production Plants

2014 ◽  
Author(s):  
Yasser E. Tawfik
Keyword(s):  
Quality Management ◽  
Product Quality ◽  
Management System ◽  
Quality Management System ◽  
Quality System ◽  
Atomic Energy ◽  
Production Plant ◽  
Production Facility ◽  
Radioisotope Production ◽  
Atomic Energy Authority

The purpose of issuing a quality manual for the radioisotope production plants is to define and describe the quality system implemented by the plant. It provides general procedures for all activities comprising the quality system, defines the authorities and responsibilities of all personnel affected by the system and provides a way to inform our customers of the specific controls that are in place at radioisotope production plants to assure continued product quality. Such a quality manual is regularly updated to depict the quality management system implemented by radioisotope production plant as accurately as possible. Example of this type of quality manual is developed for the radioisotope production facility (RPF) located in ETRR-2 Complex site – Egyptian Atomic Energy Authority – Inshas-EGYPT.

scholarly journals THE DEVELOPMENT OF THE QUALITY MANAGEMENT SYSTEM IN TERMS OF KNOWLEDGE MANAGEMENT / KOKYBĖS VADYBOS SISTEMŲ TOBULINIMAS ŽINIŲ VADYBOS ASPEKTU

2011 ◽  
Vol 3 (4) ◽  
pp. 113-119
Author(s):  
Romualdas Vitkauskas
Keyword(s):  
Knowledge Management ◽  
Quality Management ◽  
Quality Management System ◽  
Analysis Method ◽  
Continual Improvement ◽  
Correlation Analysis Method ◽  
Product And Process ◽  
Quality Of Products ◽  
The Relationship

The interaction of quality management and knowledge man­agement are analyzed quite widely in scientific literature and discussed with reference to various models integrating these two management theories. However, there are not enough precise tools that could provide a possibility of improving the quality of products and services through knowledge management. To this end, the article examines the already existing models for the interaction between quality management and knowledge management. The results of a survey on Lithuanian industry show what organizational knowledge is the most important while implementing quality management principles aimed at improving quality. The correlation analysis method showed the relationship between quality management principles (process approach, continual improvement, management, facts) and the factors defining the product and process quality (the extent of determining process execution time, process resources, costs of process stages, indicators for products and/or services, the dura­tion of the process, the extent of measuring indicators, the extent of collecting information on indicators, the extent of collecting information about the costs of the process). Santrauka Kokybės vadybos ir žinių vadybos sąveika mokslinėje literatūroje analizuojama gana plačiai, aptariami įvairūs sąveikos modeliai integruojant šias dvi vadybos teorijas. Tačiau nepakankamai nagrinėjamos konkrečios priemonės, kuriomis būtų galima pagerinti produktų ir paslaugų kokybę pasitelkiant žinių vadybą. Tuo tikslu straipsnyje analizuojami jau egzis­tuojantys kokybės vadybos ir žinių vadybos sąveikos modeliai bei pateikiami Lietuvos pramonės įmonių tyrimo rezultatai, parodantys, kokios organizacinės žinios svarbiausios įgyvendinant kokybės vadybos principus, skirtus kokybei gerinti. Taikant koreliacinės analizės metodą nustatyta, kad egzistuoja ryšys tarp kokybės vadybos principų (procesinio požiūrio, nuolatinio gerinimo, valdymo remiantis faktais) įgyvendinimo lygio ir veiksnių, apibūdinančių produktų ir procesų kokybę (procesų įvykdymo laiko nustatymas, procesų išteklių nustatymas, procesų etapų išlaidų nustatymas, produktų ir (ar) paslaugų rodiklių nustatymas, rodiklių matavimas, rodiklių informacijos rinkimas, informacijos apie proceso trukmę nustatymas ir informacijos apie proceso išlaidas rinkimas).

scholarly journals THE APPLICATION OF QUALITY MANAGEMENT SYSTEM IN THE INSPECTION OF NATIONAL MAJOR SURVEYING AND MAPPING RESULTS

2020 ◽  
Vol XLIII-B3-2020 ◽  
pp. 1307-1312
Author(s):  
C. X. Chen ◽  
J. X. Zhang ◽  
H. T. Zhao ◽  
Y. M. Xu ◽  
S. Yin
Keyword(s):  
Quality Management ◽  
Management System ◽  
Quality Management System ◽  
Quality Inspection ◽  
Machine Material ◽  
Government Decision ◽  
The Status ◽  
Cause And Effect Diagram ◽  
Surveying And Mapping

Abstract. Today's society has entered the era of big data, and the quality of surveying and mapping results has become the focus of government departments. As the statistical results of other industries, surveying and mapping results as one of the basic data sources provide data support for government decision-making, The status of surveying and mapping projects is constantly improving. This article introduces the ISO9001 quality management system implemented by the surveying and mapping production unit, the CMA quality management system implemented by the surveying and mapping quality inspection unit, and the first-level acceptance system for the two-level inspection of surveying and mapping products. Through the cause and effect diagram, taking the quality control of the fundamental geographical conditions monitoring of the national major surveying and mapping project as an example, the use method of the core tool 5M1E (Man, Machine, Material, Methods, Measurement, Environment) in the quality management system is demonstrated to prove that the quality management system plays an important role in the project. Provide reference experience for peers.

scholarly journals Review of the evaluation of the key nodes in quality system management based on the uncertainty quantification method

2021 ◽  
Vol 336 ◽  
pp. 09011
Author(s):  
Jun Wang ◽  
Qiang Ye ◽  
Chi Zhang ◽  
Tong Zhang ◽  
Shicheng Li
Keyword(s):  
Quality Management ◽  
Uncertainty Quantification ◽  
Management System ◽  
Quality Management System ◽  
Weak Link ◽  
Quality System ◽  
System Management ◽  
Quantification Method ◽  
Key Nodes

To explore the relatively weak link of the quality management system, the evaluation of the key nodes in quality system management is the crucial method for the enterprises and organizations. However, due to inadequate understanding of the goals and principles, the evaluation results are difficult to meet the requirements. Therefore, in this paper we normalize the evaluation of the quality management system and discuss the methods of uncertainty quantification as the supplementary for evaluation which brings the more accurate results for improvement suggestions.

scholarly journals Quality management system of medical care in medical organization

2019 ◽  
Vol 1 (15) ◽  
pp. 53-56
Author(s):  
D. V. Melik-Guseinov ◽  
V. Emanuel ◽  
L. A. Khodyreva ◽  
P. S. Turzin ◽  
A. Emanuel
Keyword(s):  
Quality Management ◽  
Medical Care ◽  
Management System ◽  
Quality Management System ◽  
Medical Organization ◽  
Regulatory Documents ◽  
Quality Of Medical Care

The problem of assessing and improving the quality of medical care in a medical organization is considered. Analyzed the management of medical organization processes. A scheme for managing these processes, a list of regulatory documents, types and methods for monitoring the effectiveness of their implementation are presented. Formed groups of criteria used to assess the quality of the medical organization. It is argued that the introduction of a quality management system for the provision of medical care in a medical organization increases the efficiency of its activities.

scholarly journals Pengaruh Implementasi Sistem Manajemen Mutu ISO 9001:2008 Dan Kemampuan Mengajar Widyaiswara Terhadap Kompetensi Lulusan Diklat

2016 ◽  
Vol 4 (3) ◽  
pp. 37
Author(s):  
Dewi Setiawati
Keyword(s):  
Quality Management ◽  
Management System ◽  
Quality Management System ◽  
Research Problem ◽  
Teaching Quality ◽  
Iso 9001 ◽  
Survey Method ◽  
Main Research ◽  
Independent Variables

This research mainly aims to explore competencies of training graduated which focuses on factors that influence competencies of training graduates, such as the implementation of quality management system ISO 9001:2008 and teaching quality of Widyaiswara. The main research problem addressed in this study is how the implementation of quality management system ISO 9001:2008 and teaching quality of Widyaiswara contribute to competencies of training graduates, both partially and altogether. I conducting this research, explanatory survey method is used with questionairres using likert and interval scales as the data collection techniques, that are distributed to 51 graduates of training at PPPPTK Penjas dan BK. To analyse the data, the study employs PPM (Pearson Product Moment), to investigate the direct and non-direct correlations of dependent and independent variables. Significance tests are administered using F-test and t-test. The results show that (1) the impelementation of quality management system ISO 9001:2008 significantly influences competencies of training graduates; (2) teaching quality of Widyaiswara significantly influences competencies of training graduates; and (3) both the implementation of quality management system ISO 9001:2008 and teaching quality of Widyaiswara significantly influence competencies of training graduates.

A Quality Assurance System in a Pervasive Computing Environment

2010 ◽  
pp. 61-76
Author(s):  
Amitava Mitra
Keyword(s):  
Decision Making ◽  
Quality Assurance ◽  
Quality Management ◽  
Customer Satisfaction ◽  
Management System ◽  
Quality Management System ◽  
Quality Assurance System ◽  
Management Objectives ◽  
Product Service

As the competition for products and services continues to grow, with customer satisfaction playing an integral part in this process, organizations are faced with the task of ensuring quality in all of their activities. Since many organizations do not necessarily produce the entire product or deliver the service by themselves, they are dependent on other vital sources, for example, suppliers, that impact quality of the finished product/service. This necessitates development and implementation of a quality management system which can integrate information from the various entities to facilitate decision making in a timely manner. Additionally, it is desirable for such a quality management system to be responsive to the existing quality environment at the various sources that contribute to the manufacture of the product or delivery of the service. This chapter provides a foundation for accomplishing such quality management objectives.

scholarly journals Accreditation of research in the thermo-climatic chamber - various aspects

2018 ◽  
Vol 183 ◽  
pp. 01009
Author(s):  
Artur Gawlik ◽  
Piotr Kucybała ◽  
Danuta Owczarek ◽  
Janusz Pobędza
Keyword(s):  
Quality Management ◽  
Environmental Conditions ◽  
Quality Management System ◽  
New Products ◽  
Heavy Duty ◽  
Climatic Chamber ◽  
High Quality ◽  
University Of Technology ◽  
The Impact

One of the important aspects in the implementation of new products for production in the open field is the assessment of the impact of environmental conditions on their operation. Typically thermo-climatic research is carried out for such project. The laboratory of Techno-climatic Research and Heavy Duty Machines of Cracow University of Technology, equipped with a large-sized thermo-climatic chamber conducts this type of research. Bearing in mind the assurance of high quality of the conducted research, the quality management system (QMS) was developed and implemented. The article describes the requirements, scope and process of obtaining a Polish Centre for Accreditation (PCA) certificate.

Sign in / Sign up

Export Citation Format

Share Document