DYNAMIC BEHAVIOR OF METHYLENE BLUE ON E. coli K30 CAPSULAR POLYSACCHARIDE USING LAYER BY LAYER SELF-ASSEMBLY TECHNIQUE

2020 ◽  
pp. 2050027
Author(s):  
BANDANA DAS ◽  
ALPANA BAIDYA ◽  
SANTANU MAJUMDER ◽  
RANENDU KUMAR NATH
Keyword(s):  
Thin Film ◽  
Methylene Blue ◽  
Dynamic Behavior ◽  
Self Assembly ◽  
Capsular Polysaccharide ◽  
Layer By Layer ◽  
Cationic Dye ◽  
Bacterial Polysaccharide ◽  
E Coli ◽  
Assembly Technique

Layer-by-layer (LbL) self-assembly is one of the unique methods for fabrication of ultra-thin film. This technique has immense application aross many fields in today’s life. In this paper, we have presented the fabrication of the thin film comprising of antifungal and antibacterial cationic dye methylene blue with negatively charged E. coli K30 bacterial polysaccharide sharing with PAH. The multilayers were characterized by UV–Vis absorption spectra and AFM. Various photophysical behaviors were investigated. Such studies provide a new light in the research of layer by layer self-assembly technique.

scholarly journals Fabrication and Characterization of Antibacterial-active Multilayer Films Based on Keggin Polyoxometalates and Methylene Blue

2010 ◽  
Vol 65 (2) ◽  
pp. 140-146 ◽  
Author(s):  
Dan Chen ◽  
Jun Peng ◽  
Haijun Pang ◽  
Pengpeng Zhang ◽  
Yuan Chen ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Self Assembly ◽  
Multilayer Films ◽  
Photoelectron Spectra ◽  
Layer By Layer ◽  
Force Microscopy ◽  
Atomic Force ◽  
Assembly Technique ◽  
Lbl Films ◽  
Cv Measurements

Two kinds of multilayer films based on Keggin polyoxometalates α-[SiW12O40]4−/α- [PMo12O40]3− and methylene blue have been prepared via the layer-by-layer (LBL) self-assembly technique. The multilayer films were characterized by UV/Vis spectra, atomic force microscopy (AFM) and X-ray photoelectron spectra (XPS). The cyclic voltammetry (CV) measurements have demonstrated that the electrochemical properties of POMs are maintained in the LBL films. The antibacterial activity of the LBL films has also been investigated, which shows a distinct antibacterial effect against Escherichia coli.

Multilayer composite beads constructed via layer-by-layer self-assembly for lysozyme controlled release

RSC Advances ◽  
2014 ◽  
Vol 4 (46) ◽  
pp. 24369-24376 ◽  
Author(s):  
Jiemin Zhao ◽  
Xiaoping Wang ◽  
Yanshen Kuang ◽  
Yufeng Zhang ◽  
Xiaowen Shi ◽  
...  
Keyword(s):  
Controlled Release ◽  
Self Assembly ◽  
Cross Linking ◽  
Layer By Layer ◽  
Multilayer Composite ◽  
Composite Beads ◽  
Assembly Technique ◽  
Positively Charged

Alginate (ALG)–lysozyme (LZ) beads were fabricated by a cross-linking process. Negatively charged ALG and positively charged LZ were alternately deposited on the positively charged ALG–LZ beads via a layer-by-layer (LBL) self-assembly technique.

scholarly journals Carbon Nano-Onions Reinforced Multilayered Thin Film System for Stimuli-Responsive Drug Release

Pharmaceutics ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 1208
Author(s):  
Narsimha Mamidi ◽  
Ramiro Velasco Delgadillo ◽  
Aldo Gonzáles Ortiz ◽  
Enrique Barrera
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Drug Release ◽  
Self Assembly ◽  
Critical Role ◽  
Layer By Layer ◽  
Film System ◽  
Stimuli Responsive ◽  
Ph Responsive ◽  
Thin Film System

Herein, poly (N-(4-aminophenyl) methacrylamide))-carbon nano-onions (PAPMA-CNOs = f-CNOs) and anilinated-poly (ether ether ketone) (AN-PEEK) have synthesized, and AN-PEEK/f-CNOs composite thin films were primed via layer-by-layer (LbL) self-assembly for stimuli-responsive drug release. The obtained thin films exhibited pH-responsive drug release in a controlled manner; pH 4.5 = 99.2% and pH 6.5 = 59.3% of doxorubicin (DOX) release was observed over 15 days. Supramolecular π-π stacking interactions between f-CNOs and DOX played a critical role in controlling drug release from thin films. Cell viability was studied with human osteoblast cells and augmented viability was perceived. Moreover, the thin films presented 891.4 ± 8.2 MPa of the tensile strength (σult), 43.2 ± 1.1 GPa of Young’s modulus (E), and 164.5 ± 1.7 Jg−1 of toughness (K). Quantitative scrutiny revealed that the well-ordered aligned nanofibers provide critical interphase, and this could be responsible for augmented tensile properties. Nonetheless, a pH-responsive and mechanically robust biocompatible thin-film system may show potential applications in the biomedical field.

scholarly journals Fabrication and in vitro evaluation of stable collagen/hyaluronic acid biomimetic multilayer on titanium coatings

2013 ◽  
Vol 10 (84) ◽  
pp. 20130070 ◽  
Author(s):  
Haiyong Ao ◽  
Youtao Xie ◽  
Honglue Tan ◽  
Shengbing Yang ◽  
Kai Li ◽  
...  
Keyword(s):  
Hyaluronic Acid ◽  
Photoelectron Spectroscopy ◽  
Self Assembly ◽  
Human Mesenchymal Stem Cells ◽  
Biological Properties ◽  
Covalent Immobilization ◽  
Layer By Layer ◽  
Titanium Coating ◽  
Assembly Technique

Layer-by-layer (LBL) self-assembly technique has been proved to be a highly effective method to immobilize the main components of the extracellular matrix such as collagen and hyaluronic acid on titanium-based implants and form a polyelectrolyte multilayer (PEM) film by electrostatic interaction. However, the formed PEM film is unstable in the physiological environment and affects the long-time effectiveness of PEM film. In this study, a modified LBL technology has been developed to fabricate a stable collagen/hyaluronic acid (Col/HA) PEM film on titanium coating (TC) by introducing covalent immobilization. Scanning electron microscopy, diffuse reflectance Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy were used to characterize the PEM film. Results of Sirius red staining demonstrated that the chemical stability of PEM film was greatly improved by covalent cross-linking. Cell culture assays further illustrated that the functions of human mesenchymal stem cells, such as attachment, spreading, proliferation and differentiation, were obviously enhanced by the covalently immobilized Col/HA PEM on TCs compared with the absorbed Col/HA PEM. The improved stability and biological properties of the Col/HA PEM covalently immobilized TC may be beneficial to the early osseointegration of the implants.

A wearable and highly sensitive strain sensor based on a polyethylenimine–rGO layered nanocomposite thin film

2017 ◽  
Vol 5 (31) ◽  
pp. 7746-7752 ◽  
Author(s):  
Xueliang Ye ◽  
Zhen Yuan ◽  
Huiling Tai ◽  
Weizhi Li ◽  
Xiaosong Du ◽  
...  
Keyword(s):  
Thin Film ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Self Assembly ◽  
Strain Sensor ◽  
Layer By Layer ◽  
Nanocomposite Thin Film ◽  
Assembly Method ◽  
Reduced Graphene ◽  
Highly Sensitive

A novel strain sensor based on reduced graphene oxide with ultra-sensitive and ultra-durable performance was fabricated by the chemical layer-by-layer self-assembly method.

Sign in / Sign up

Export Citation Format

Share Document