Free Vibration of Damaged Frame Structures Considering the Effects of Axial Extension, Shear Deformation and Rotatory Inertia: Exact Solution

2017 ◽  
Vol 17 (10) ◽  
pp. 1750111
Author(s):  
Ugurcan Eroglu ◽  
Ekrem Tufekci
Keyword(s):  
Exact Solution ◽  
Free Vibration ◽  
Shear Deformation ◽  
Natural Frequencies ◽  
Plane Motion ◽  
Mode Shapes ◽  
Frame Structures ◽  
Crack Identification ◽  
Rotatory Inertia ◽  
Axial Extension

In this paper, a procedure based on the transfer matrix method for obtaining the exact solution to the equations of free vibration of damaged frame structures, considering the effects of axial extension, shear deformation, rotatory inertia, and all compliance components arising due to the presence of a crack, is presented. The crack is modeled by a rotational and/or translational spring based on the concept of linear elastic fracture mechanics. Only the in-plane motion of planar structures is considered. The formulation is validated through some examples existing in the literature. Additionally, the mode shapes and natural frequencies of a frame with pitched roof are provided. The variation of natural frequencies with respect to the crack location is presented. It is concluded that considering the axial compliance, and axial-bending coupling due to the presence of a crack results in different dynamic characteristics, which should be considered for problems where high precision is required, such as for the crack identification problems.

EXACT SOLUTION OF FREE IN-PLANE VIBRATION OF SHALLOW CIRCULAR ARCHES

2001 ◽  
Vol 01 (03) ◽  
pp. 409-428 ◽  
Author(s):  
EKREM TÜFEKÇİ
Keyword(s):  
Exact Solution ◽  
Boundary Conditions ◽  
Shear Deformation ◽  
Slenderness Ratio ◽  
Mode Shapes ◽  
Rotatory Inertia ◽  
Shallow Arch ◽  
Inertia Effects ◽  
Plane Vibration ◽  
Axial Extension

The free in-plane vibration of a shallow circular arch with uniform cross-section is investigated by taking into account axial extension, shear deformation and rotatory inertia effects. The exact solution of the governing differential equations is obtained by the initial value method. By employing the same solution procedure, the solutions are also given for the other cases, in which each effect is considered alone, as well as no effect. The frequency coefficients are obtained for the lowest five vibration modes of arches with five combinations of classical boundary conditions, and various slenderness ratios and opening angles. The results show that the shear deformation and rotatory inertia effects are also very important as well as the axial extension effect, even if a slender shallow arch is considered. The discrepancies among the results of the five cases decrease, when opening angle increases for a constant radius and slenderness ratio. The effects of the boundary conditions and the slenderness ratio of the arch are investigated. The discrepancies among the results of the cases become much more important in higher modes. The mode shapes of a shallow arch are obtained for each case.

Comparative perspective of various shear deformation theories with experimental verification for modal analysis of hybrid laminates

2015 ◽  
Vol 23 (8) ◽  
pp. 1321-1333 ◽  
Author(s):  
Dhiraj Biswas ◽  
Chaitali Ray
Keyword(s):  
Finite Element ◽  
Free Vibration ◽  
Modal Analysis ◽  
Shear Deformation ◽  
Deformation Theory ◽  
Natural Frequencies ◽  
Shear Deformation Theory ◽  
Mode Shapes ◽  
Glass Fibres ◽  
Hybrid Laminates

The present paper deals with the free vibration modal analysis of hybrid laminates using a finite element model based on the third order shear deformation theory (TSDT) and the first order shear deformation theory (FSDT). A computer code has been developed using MATLAB, 2013. The experimental investigation on the free vibration of hybrid laminates made of carbon and glass fibres has been conducted. The hybrid laminate is prepared by placing carbon fibres in the outermost laminae and glass fibres in the rest of the laminate. The bi-directional glass and carbon fabrics and the epoxy resin are used for the preparation of laminates in the laboratory. The experimental models of laminates have been prepared by the resin infusion process using vacuum bagging technique. The natural frequencies of hybrid laminates for different modes are determined and the mode shapes are plotted for the corresponding frequencies by experiment and numerical procedure. The finite element formulations based on TSDT and FSDT for the composite laminates predict the natural frequencies and are validated by comparing with the experimental results.

scholarly journals Effects of Elliptical Hole on the Correlation of Natural Frequency with Buckling Load of Basalt Laminates Composite Plates

2020 ◽  
Vol 27 (1) ◽  
pp. 216-225
Author(s):  
Buntheng Chhorn ◽  
WooYoung Jung
Keyword(s):  
Free Vibration ◽  
Natural Frequency ◽  
Natural Frequencies ◽  
Basalt Fiber ◽  
Orientation Angle ◽  
Elliptical Hole ◽  
Composite Plates ◽  
Buckling Load ◽  
Mode Shapes ◽  
Geometric Ratio

AbstractRecently, basalt fiber reinforced polymer (BFRP) is acknowledged as an outstanding material for the strengthening of existing concrete structure, especially it was being used in marine vehicles, aerospace, automotive and nuclear engineering. Most of the structures were subjected to severe dynamic loading during their service life that may induce vibration of the structures. However, free vibration studied on the basalt laminates composite plates with elliptical cut-out and correlation of natural frequency with buckling load has been very limited. Therefore, effects of the elliptical hole on the natural frequency of basalt/epoxy composite plates was performed in this study. Effects of stacking sequence (θ), elliptical hole inclination (ϕ), hole geometric ratio (a/b) and position of the elliptical hole were considered. The numerical modeling of free vibration analysis was based on the mechanical properties of BFRP obtained from the experiment. The natural frequencies as well as mode shapes of basalt laminates composite plates were numerically determined using the commercial program software (ABAQUS). Then, the determination of correlation of natural frequencies with buckling load was carried out. Results showed that elliptical hole inclination and fiber orientation angle induced the inverse proportion between natural frequency and buckling load.

Vibration of Beams with a Single Delamination under Axial Loading

2011 ◽  
Vol 675-677 ◽  
pp. 477-480
Author(s):  
Dong Wei Shu
Keyword(s):  
Free Vibration ◽  
Natural Frequency ◽  
Analytical Solutions ◽  
Axial Load ◽  
Natural Frequencies ◽  
Axial Loading ◽  
Composite Beams ◽  
Mode Shapes ◽  
Equilibrium Conditions ◽  
Monotonic Relation

In this work analytical solutions are developed to study the free vibration of composite beams under axial loading. The beam with a single delamination is modeled as four interconnected Euler-Bernoulli beams using the delamination as their boundary. The continuity and the equilibrium conditions are satisfied between the adjoining beams. The studies show that the sizes and the locations of the delaminations significantly influence the natural frequencies and mode shapes of the beam. A monotonic relation between the natural frequency and the axial load is predicted.

Flexural Vibration of Prestressed Concrete Bridges with Corrugated Steel Webs

2017 ◽  
Vol 17 (02) ◽  
pp. 1750023 ◽  
Author(s):  
Xia-Chun Chen ◽  
Zhen-Hu Li ◽  
Francis T. K. Au ◽  
Rui-Juan Jiang
Keyword(s):  
Finite Element ◽  
Shear Deformation ◽  
Prestressed Concrete ◽  
Natural Frequencies ◽  
Sandwich Beam ◽  
Flexural Vibration ◽  
Concrete Bridges ◽  
Mode Shapes ◽  
Beam Model ◽  
Prestressed Concrete Bridges

Prestressed concrete bridges with corrugated steel webs have emerged as a new form of steel-concrete composite bridges with remarkable advantages compared with the traditional ones. However, the assumption that plane sections remain plane may no longer be valid for such bridges due to the different behavior of the constituents. The sandwich beam theory is extended to predict the flexural vibration behavior of this type of bridges considering the presence of diaphragms, external prestressing tendons and interaction between the web shear deformation and flange local bending. To this end, a [Formula: see text] beam finite element is formulated. The proposed theory and finite element model are verified both numerically and experimentally. A comparison between the analyses based on the sandwich beam model and on the classical Euler–Bernoulli and Timoshenko models reveals the following findings. First of all, the extended sandwich beam model is applicable to the flexural vibration analysis of the bridges considered. By letting [Formula: see text] denote the square root of the ratio of equivalent shear rigidity to the flange local flexural rigidity, and L the span length, the combined parameter [Formula: see text] appears to be more suitable for considering the diaphragm effect and the interaction between the shear deformation and flange local bending. The diaphragms have significant effect on the flexural natural frequencies and mode shapes only when the [Formula: see text] value of the bridge falls below a certain limit. For a bridge with an [Formula: see text] value over a certain limit, the flexural natural frequencies and mode shapes obtained from the sandwich beam model and the classical Euler–Bernoulli and Timoshenko models tend to be the same. In such cases, either of the classical beam theories may be used.

Dynamic characteristics of horizontally curved bridges

2017 ◽  
Vol 24 (19) ◽  
pp. 4465-4483 ◽  
Author(s):  
Mohsen Amjadian ◽  
Anil K Agrawal
Keyword(s):  
Free Vibration ◽  
Dynamic Characteristics ◽  
Natural Frequencies ◽  
Response Spectrum ◽  
Translational Motion ◽  
Free Vibration Analysis ◽  
Mode Shapes ◽  
Curved Bridges ◽  
Horizontally Curved ◽  
Horizontally Curved Bridges

Horizontally curved bridges have complicated dynamic characteristics because of their irregular geometry and nonuniform mass and stiffness distributions. This paper aims to develop a simplified and practical method for the calculation of the natural frequencies and mode shapes of horizontally curved bridges that would be of interest to bridge engineers for the estimation of the seismic response of these types of bridges. For this purpose, a simple three-degree-of-freedom (3DOF) dynamic model for free vibration equation of this type of bridge has been developed. It is shown that the translational motion of the deck of horizontally curved bridges in the direction that is perpendicular to their axis of symmetry is always coupled with the rotational motion of the deck, regardless of the location of the stiffness center. The model is further exploited to develop closed-form formulas for the estimation of the maximum displacements of the corners of the deck of one-way asymmetric horizontally curved bridges. The accuracy of the model is verified by finite-element model of a horizontally curved bridge prototype in OpenSEES. Finally, the model is utilized to study the influence of the location of the stiffness center with respect to the deck curvature center on the natural frequency and the maximum displacements of the corners of the deck for different curvatures of the deck. The results of free vibration analysis show that the natural frequencies of one-way asymmetric horizontally curved bridges, in general, increase with the increase of the subtended angle of the deck. The results of earthquake response spectrum analysis show that the increase in the subtended angle of one-way asymmetric horizontally curved bridges decreases the radial displacements of the corners of the deck but increases the azimuthal displacement. These two responses both increase with the increase in the distance between the stiffness center and the curvature center.

Free Vibration Analysis of a Carbon Nanotube Reinforced Composite Beam

2014 ◽  
Vol 592-594 ◽  
pp. 2041-2045 ◽  
Author(s):  
B. Naresh ◽  
A. Ananda Babu ◽  
P. Edwin Sudhagar ◽  
A. Anisa Thaslim ◽  
R. Vasudevan
Keyword(s):  
Carbon Nanotube ◽  
Free Vibration ◽  
Composite Beam ◽  
Natural Frequencies ◽  
Equations Of Motion ◽  
Free Vibration Analysis ◽  
Mode Shapes ◽  
Element Formulation ◽  
Reinforced Composite ◽  
Vibration Responses

In this study, free vibration responses of a carbon nanotube reinforced composite beam are investigated. The governing differential equations of motion of a carbon nanotube (CNT) reinforced composite beam are presented in finite element formulation. The validity of the developed formulation is demonstrated by comparing the natural frequencies evaluated using present FEM with those of available literature. Various parametric studies are also performed to investigate the effect of aspect ratio and percentage of CNT content and boundary conditions on natural frequencies and mode shapes of a carbon nanotube reinforced composite beam. It is shown that the addition of carbon nanotube in fiber reinforced composite beam increases the stiffness of the structure and consequently increases the natural frequencies and alter the mode shapes.

scholarly journals Phononic Band Gap and Free Vibration Analysis of Fluid-Conveying Pipes with Periodically Varying Cross-Section

2021 ◽  
Vol 11 (21) ◽  
pp. 10485
Author(s):  
Hao Yu ◽  
Feng Liang ◽  
Yu Qian ◽  
Jun-Jie Gong ◽  
Yao Chen ◽  
...  
Keyword(s):  
Free Vibration ◽  
Band Gap ◽  
Cross Section ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Critical Parameters ◽  
Mode Shapes ◽  
Beam Model ◽  
The Impact ◽  
Fluid Conveying Pipes

Phononic crystals (PCs) are a novel class of artificial periodic structure, and their band gap (BG) attributes provide a new technical approach for vibration reduction in piping systems. In this paper, the vibration suppression performance and natural properties of fluid-conveying pipes with periodically varying cross-section are investigated. The flexural wave equation of substructure pipes is established based on the classical beam model and traveling wave property. The spectral element method (SEM) is developed for semi-analytical solutions, the accuracy of which is confirmed by comparison with the available literature and the widely used transfer matrix method (TMM). The BG distribution and frequency response of the periodic pipe are attained, and the natural frequencies and mode shapes are also obtained. The effects of some critical parameters are discussed. It is revealed that the BG of the present pipe system is fundamentally induced by the geometrical difference of the substructure cross-section, and it is also related to the substructure length and fluid–structure interaction (FSI). The number of cells does not contribute to the BG region, while it has significant effects on the amplitude attenuation, higher order natural frequencies and mode shapes. The impact of FSI is more evident for the pipes with smaller numbers of cells. Moreover, compared with the conventional TMM, the present SEM is demonstrated more effective for comprehensive analysis of BG characteristics and free vibration of PC dynamical structures.

scholarly journals UNCOUPLED VIBRATIONS IN FUNCTIONALLY GRADED TIMOSHENKO BEAM

2016 ◽  
Vol 54 (6) ◽  
pp. 785 ◽  
Author(s):  
Nguyen Tien Khiem ◽  
Nguyen Ngoc Huyen
Keyword(s):  
Free Vibration ◽  
Timoshenko Beam ◽  
Natural Frequencies ◽  
Flexural Vibration ◽  
Functionally Graded ◽  
Mode Shapes ◽  
Power Law Distribution ◽  
Material Parameters ◽  
Flexural Vibrations ◽  
Fgm Beam

Free vibration of FGM Timoshenko beam is investigated on the base of the power law distribution of FGM. Taking into account the actual position of neutral plane enables to obtain general condition for uncoupling of axial and flexural vibrations in FGM beam. This condition defines a class of functionally graded beams for which axial and flexural vibrations are completely uncoupled likely to the homogeneous beams. Natural frequencies and mode shapes of uncoupled flexural vibration of beams from the class are examined in dependence on material parameters and slendernes

Sign in / Sign up

Export Citation Format

Share Document