Effect of titanium suboxide on the formation of anatase and rutile phases during annealing of C-Doped Ti–O thin film deposited by DC magnetron sputtering

2020 ◽  
Vol 13 (05) ◽  
pp. 2051021
Author(s):  
Xiaodan Zuo ◽  
Qiaoyuan Deng ◽  
Tao Yang ◽  
Jiaqi Liu ◽  
Huatang Cao ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Photoelectron Spectroscopy ◽  
Anatase Phase ◽  
Methyl Orange Solution ◽  
Xenon Lamp ◽  
Dc Magnetron Sputtering ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Titanium Suboxide

C-doped Ti–O films with different titanium suboxide contents are prepared by DC magnetron sputtering deposition at different sputtering powers. The films with different phases are formed after annealing at 873[Formula: see text]K in air. The structure of the films is characterized by X-ray diffraction, Raman spectroscopy and X-ray photoelectron spectroscopy. The optical properties and surface roughness of the films are investigated by UV–vis spectroscopy and atomic force microscopy, respectively. Photocatalytic activity of the thin films is studied by degrading the methyl orange solution under xenon lamp (300[Formula: see text]W) irradiation. The results show that the C-doped Ti–O thin films with higher titanium suboxide contents ([Formula: see text]%) tend to form the rutile phase after annealing, whereas the films with a lower titanate content ([Formula: see text]%) are easy to form anatase phase by annealing.

Synthesis and Characterization of Nb-Doped TiO2 Thin Films Prepared by RF Magnetron Sputtering

2015 ◽  
Vol 1117 ◽  
pp. 139-142 ◽  
Author(s):  
Marius Dobromir ◽  
Radu Paul Apetrei ◽  
A.V. Rogachev ◽  
Dmitry L. Kovalenko ◽  
Dumitru Luca
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Photoelectron Spectroscopy ◽  
Rf Magnetron Sputtering ◽  
X Ray ◽  
Force Microscopy ◽  
Glass Substrates ◽  
Atomic Force ◽  
Vis Spectroscopy ◽  
Diffraction Patterns

Amorphous Nb-doped TiO2 thin films were deposited on (100) Si and glass substrates at room temperature by RF magnetron sputtering and a mosaic-type Nb2O5-TiO2 sputtering target. To adjust the amount of the niobium dopant in the film samples, appropriate numbers of Nb2O5 pellets were placed on the circular area of the magnetron target with intensive sputtering. By adjusting the discharge conditions and the number of niobium oxide pellets, films with dopant content varying between 0 and 16.2 at.% were prepared, as demonstrated by X-ray photoelectron spectroscopy data. The X-ray diffraction patterns of the as-deposited samples showed the lack of crystalline ordering in the samples. Surfaces roughness and energy band gap values increase with dopant concentration, as showed by atomic force microscopy and UV-Vis spectroscopy measurements.

Crystal structures and magnetic properties of Fe–N thin films deposited by dc magnetron sputtering

2004 ◽  
Vol 19 (4) ◽  
pp. 352-355 ◽  
Author(s):  
Wei Tao Zheng ◽  
Xin Wang ◽  
Xianggui Kong ◽  
Hongwei Tian ◽  
Shansheng Yu ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetic Properties ◽  
Magnetron Sputtering ◽  
Crystal Structures ◽  
Photoelectron Spectroscopy ◽  
Quantum Interference ◽  
Flow Ratio ◽  
Dc Magnetron Sputtering ◽  
X Ray ◽  
Glass Substrates

Fe–N thin films were deposited on glass substrates by dc magnetron sputtering under various Ar∕N2 discharge conditions. Crystal structures and elemental compositions of the films were characterized by X-ray diffraction and X-ray photoelectron spectroscopy. Magnetic properties of the films were measured using a superconducting quantum interference device magnetometer. Films deposited at different N2∕(Ar+N2) flow ratios were found to have different crystal structures and different nitrogen contents. When the flow ratios were 60%, 50%, and 30%, a nonmagnetic single-phase FeN was formed in the films. At the flow ratio of 10%, two crystal phases of γ′-Fe4N and ε-Fe3N were detected. When the flow ratio reduced to 5%, a mixture of α-Fe, ε-Fe3N, FeN0.056, and α″-Fe16N2 phases was obtained. The value of saturation magnetization for the mixture was found to be larger than that of pure Fe.

scholarly journals Reactive Dual Magnetron Sputtering: A Fast Method for Preparing Stoichiometric Microcrystalline ZnWO4 Thin Films

Surfaces ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 106-114
Author(s):  
Yannick Hermans ◽  
Faraz Mehmood ◽  
Kerstin Lakus-Wollny ◽  
Jan P. Hofmann ◽  
Thomas Mayer ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Photoelectron Spectroscopy ◽  
Fast Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Substrates ◽  
Post Annealing ◽  
Rf Signal ◽  
First Time

Thin films of ZnWO4, a promising photocatalytic and scintillator material, were deposited for the first time using a reactive dual magnetron sputtering procedure. A ZnO target was operated using an RF signal, and a W target was operated using a DC signal. The power on the ZnO target was changed so that it would match the sputtering rate of the W target operated at 25 W. The effects of the process parameters were characterized using optical spectroscopy, X-ray diffraction, and scanning electron microscopy, including energy dispersive X-ray spectroscopy as well as X-ray photoelectron spectroscopy. It was found that stoichiometric microcrystalline ZnWO4 thin films could be obtained, by operating the ZnO target during the sputtering procedure at a power of 55 W and by post-annealing the resulting thin films for at least 10 h at 600 °C. As FTO coated glass substrates were used, annealing led as well to the incorporation of Na, resulting in n+ doped ZnWO4 thin films.

Transparent Conductive Cu-In-O Thin Films Deposited by Reactive DC Magnetron Sputtering with Different Targets

2011 ◽  
Vol 239-242 ◽  
pp. 2752-2755
Author(s):  
Fan Ye ◽  
Xing Min Cai ◽  
Fu Ping Dai ◽  
Dong Ping Zhang ◽  
Ping Fan ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Optical Band Gap ◽  
Diffraction Peak ◽  
X Ray Diffraction ◽  
Dc Magnetron Sputtering ◽  
Flow Rates ◽  
X Ray ◽  
Equal Distance ◽  
Transmittance Curve

Transparent conductive Cu-In-O thin films were deposited by reactive DC magnetron sputtering. Two types of targets were used. The first was In target covered with a fan-shaped Cu plate of the same radius and the second was Cu target on which six In grains of 1.5mm was placed with equal distance between each other. The samples were characterized with scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), UV/VIS spectrophotometer, four-probe measurement etc. SEM shows that the surfaces of all the samples are very smooth. EDX shows that the samples contain Cu, In as well as O, and different targets result in different atomic ratios of Cu to In. A diffraction peak related to rhombohedra-centered In2O3(012) is observed in the XRD spectra of all the samples. For both the two targets, the transmittance decreases with the increase of O2flow rates. The direct optical band gap of all the samples is also estimated according to the transmittance curve. For both the two targets, different O2flow rates result in different sheet resistances and conductivities. The target of Cu on In shows more controllability in the composition and properties of Cu-In-O films.

scholarly journals Resistive Switching Characteristics of Li-Doped ZnO Thin Films Based on Magnetron Sputtering

Materials ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1282 ◽  
Author(s):  
Zhao ◽  
Li ◽  
Ai ◽  
Wen
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Resistive Switching ◽  
Photoelectron Spectroscopy ◽  
Lattice Structure ◽  
Zno Thin Films ◽  
Bipolar Resistive Switching ◽  
X Ray ◽  
Doped Zno ◽  
Switching Characteristics

A kind of devices Pt/Ag/ZnO:Li/Pt/Ti with high resistive switching behaviors were prepared on a SiO2/Si substrate by using magnetron sputtering method and mask technology, composed of a bottom electrode (BE) of Pt/Ti, a resistive switching layer of ZnO:Li thin film and a top electrode (TE) of Pt/Ag. To determine the crystal lattice structure and the Li-doped concentration in the resulted ZnO thin films, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) tests were carried out. Resistive switching behaviors of the devices with different thicknesses of Li-doped ZnO thin films were studied at different set and reset voltages based on analog and digital resistive switching characteristics. At room temperature, the fabricated devices represent stable bipolar resistive switching behaviors with a low set voltage, a high switching current ratio and a long retention up to 104 s. In addition, the device can sustain an excellent endurance more than 103 cycles at an applied pulse voltage. The mechanism on how the thicknesses of the Li-doped ZnO thin films affect the resistive switching behaviors was investigated by installing conduction mechanism models. This study provides a new strategy for fabricating the resistive random access memory (ReRAM) device used in practice.

scholarly journals Comparative Study of ZnO Thin Films Grown on Quartz Glass and Sapphire (001) Substrates by Means of Magnetron Sputtering and High-Temperature Annealing

2019 ◽  
Vol 9 (21) ◽  
pp. 4509
Author(s):  
Weijia Yang ◽  
Fengming Wang ◽  
Zeyi Guan ◽  
Pengyu He ◽  
Zhihao Liu ◽  
...  
Keyword(s):  
Thin Films ◽  
High Temperature ◽  
Magnetron Sputtering ◽  
Comparative Study ◽  
Quartz Glass ◽  
Photoelectron Spectroscopy ◽  
Zno Thin Films ◽  
High Temperature Annealing ◽  
X Ray ◽  
Glass Substrates

In this work, we reported a comparative study of ZnO thin films grown on quartz glass and sapphire (001) substrates through magnetron sputtering and high-temperature annealing. Firstly, the ZnO thin films were deposited on the quartz glass and sapphire (001) substrates in the same conditions by magnetron sputtering. Afterwards, the sputtered ZnO thin films underwent an annealing process at 600 °C for 1 h in an air atmosphere to improve the quality of the films. X-ray diffraction, scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectra, photoluminescence spectra, and Raman spectra were used to investigate the structural, morphological, electrical, and optical properties of the both as-received ZnO thin films. The ZnO thin films grown on the quartz glass substrates possess a full width of half maximum value of 0.271° for the (002) plane, a surface root mean square value of 0.50 nm and O vacancies/defects of 4.40% in the total XPS O 1s peak. The comparative investigation reveals that the whole properties of the ZnO thin films grown on the quartz glass substrates are comparable to those grown on the sapphire (001) substrates. Consequently, ZnO thin films with high quality grown on the quartz glass substrates can be achieved by means of magnetron sputtering and high-temperature annealing at 600 °C.

The piezoresistive properties research of SiC thin films prepared by RF magnetron sputtering

2019 ◽  
Vol 33 (15) ◽  
pp. 1950152 ◽  
Author(s):  
Jing Wu ◽  
Xiaofeng Zhao ◽  
Chunpeng Ai ◽  
Zhipeng Yu ◽  
Dianzhong Wen
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Cantilever Beam ◽  
Photoelectron Spectroscopy ◽  
Film Surface ◽  
Rf Magnetron Sputtering ◽  
Micro Electro Mechanical System ◽  
Gauge Factor ◽  
X Ray ◽  
Sputtering Power

To research the piezoresistive properties of SiC thin films, a testing structure consisting of a cantilever beam, SiC thin films piezoresistors and a Cr/Pt electrode is proposed in this paper. The chips of testing structure were fabricated by micro-electro-mechanical system (MEMS) technology on a silicon wafer with [Formula: see text]100[Formula: see text] orientation, in which SiC thin films were deposited by using radio-frequency (13.56 MHz) magnetron sputtering method. The effect of sputtering power, annealing temperature and time on the microstructure and morphology of the SiC thin films were investigated by the X-ray diffraction (XRD) and scanning electron microscopy (SEM). It indicates that a good continuity and uniform particles on the SiC thin film surface can be achieved at sputtering power of 160 W after annealing. To verify the existence of Si–C bonds in the thin films, X-ray photoelectron spectroscopy (XPS) was used. Meanwhile, the piezoresistive properties of SiC thin films piezoresistors were measured using the proposed cantilever beam. The test result shows that it is possible to achieve a gauge factor of 35.1.

Growth and Characterizations of Indium-Doped Pentacene Thinfilm Prepared by Thermal Co-Evaporation as a Novel Nanomaterial

2015 ◽  
Vol 1131 ◽  
pp. 35-38
Author(s):  
Navaphun Kayunkid ◽  
Annop Chanhom ◽  
Chaloempol Saributr ◽  
Adirek Rangkasikorn ◽  
Jiti Nukeaw
Keyword(s):  
Thin Films ◽  
Carrier Concentration ◽  
Photoelectron Spectroscopy ◽  
High Vacuum ◽  
Charge Carrier Mobility ◽  
Electrical Measurements ◽  
X Ray ◽  
Force Microscopy ◽  
Vis Spectroscopy ◽  
Hybrid Thin Films

This research is related to growth and characterizations of indium-doped pentacene thin films as a novel hybrid material. Doped films were prepared by thermal co-evaporation under high vacuum. The doping concentration was varied from 0% to 50% by controlling the different deposition rate between these two materials while the total thickness was fixed at 100 nm. The hybrid thin films were characterized by atomic force microscopy (AFM), X-ray diffraction (XRD) and UV-Visible spectroscopy to reveal the physical and optical properties. Moreover, the electrical properties of ITO/indium-doped-pentacene/Al devices i.e. charge mobility and carrier concentration were determined by considering the relationship between current-voltage and capacitance-voltage. AFM results identify that doping of indium into pentacene has an effect on surface properties of doped films i.e. the increase of surface grain size. XRD results indicate that doping of metal into pentacene has an effect on preferential orientation of pentacene’s crystalline domains. UV-Vis spectroscopy results show evolution of absorbance at photon energy higher than 2.7 eV corresponding to absorption from oxide of indium formed in the films. Electrical measurements exhibit higher conductivity in doped films resulting from increment of both charge carrier mobility and carrier concentration. Furthermore, chemical interactions taken place inside the doped films were investigated by x-ray photoelectron spectroscopy (XPS) in order to complete the remaining questions i.e. how do indium atoms interact with the neighbor molecules?, what is the origin of the absorption at E > 2.7 eV? Further results and discussions will be presented in the publication.

scholarly journals The Effects of Annealing Temperature on the Structural Properties of ZrB2 Films Deposited via Pulsed DC Magnetron Sputtering

Coatings ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 253 ◽  
Author(s):  
Wei-Chun Chen ◽  
Chao-Te Lee ◽  
James Su ◽  
Hung-Pin Chen
Keyword(s):  
Electron Microscopy ◽  
Magnetron Sputtering ◽  
Structural Properties ◽  
Photoelectron Spectroscopy ◽  
Annealing Temperature ◽  
High Vacuum ◽  
Film Structure ◽  
Dc Magnetron Sputtering ◽  
Cross Sectional ◽  
X Ray

Zirconium diboride (ZrB2) thin films were deposited on a Si(100) substrate using pulsed direct current (dc) magnetron sputtering and then annealed in high vacuum. In addition, we discussed the effects of the vacuum annealing temperature in the range of 750 to 870 °C with flowing N2 on the physical properties of ZrB2 films. The structural properties of ZrB2 films were investigated with X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). The XRD patterns indicated that the ZrB2 films annealed at various temperatures exhibited a highly preferred orientation along the [0001] direction and that the residual stress could be relaxed by increasing the annealing temperature at 870 °C in a vacuum. The surface morphology was smooth, and the surface roughness slightly decreased with increasing annealing temperature. Cross-sectional TEM images of the ZrB2/Si(100) film annealed at 870 °C reveals the films were highly oriented in the direction of the c-axis of the Si substrate and the film structure was nearly stoichiometric in composition. The XPS results show the film surfaces slightly contain oxygen, which corresponds to the binding energy of Zr–O. Therefore, the obtained ZrB2 film seems to be quite suitable as a buffer layer for III-nitride growth.

scholarly journals Surface Stoichiometry and Optical Properties of Cux–TiyCz Thin Films Deposited by Magnetron Sputtering

Coatings ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 551 ◽  
Author(s):  
Avishek Roy ◽  
Arun Kumar Mukhopadhyay ◽  
Sadhan Chandra Das ◽  
Gourab Bhattacharjee ◽  
Abhijit Majumdar ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Magnetron Sputtering ◽  
Photoelectron Spectroscopy ◽  
Metal Matrix ◽  
Optical Band Gap ◽  
Matrix Composites ◽  
X Ray ◽  
Peak Intensity ◽  
Ternary Carbide

Ternary carbide in metal matrix composites constitute a big challenge in the industry, and in this regard their surface treatment is one of the most important issues. Ternary carbide (CuxTiyCz, where x, y and z are integers) thin films are synthesized by magnetron sputtering and characterized with respect to the film depth. X-ray photoelectron spectroscopy (XPS) of Cu-2p and Ti-2p peaks shows the associated shake-up satellite peaks at a smaller film depth; the peak intensity is reduced at a higher depth. The relative intensity of Cu and Ti increases at a larger film depth. The optical band gap varies from 1.83 to 2.20 eV at different film depths.

Sign in / Sign up

Export Citation Format

Share Document