scholarly journals Vibration energy harvesting: A review

2019 ◽  
Vol 09 (04) ◽  
pp. 1930001 ◽  
Author(s):  
Anwesa Mohanty ◽  
Suraj Parida ◽  
Rabindra Kumar Behera ◽  
Tarapada Roy
Keyword(s):  
Energy Harvesting ◽  
Small Scale ◽  
Recent Past ◽  
Vibration Energy Harvesting ◽  
Power Sources ◽  
Energy Harvesters ◽  
Portable Power ◽  
Different Types ◽  
Energy Harvesting System ◽  
Energy Harvesting Devices

This study is based on energy harvesting from vibration and deals with the comparison of different techniques. In the present scenario, energy harvesting has drawn the attention of researchers due to a rapid increase in the use of wireless and small-scale devices. So, there is a huge thirst among scientists to develop permanent portable power sources. In the surroundings, a lot of unutilized energy is wasted which can be collected and used for power generation. Research works have been extensively carried out to develop energy harvesting devices catering to the increasing needs of being efficient and economical. Effective energy harvesting mainly depends on the design of the transducer. Different types of design techniques, material properties, and availability of energy harvesters are reviewed in this paper. The paper aims to explore the advantages and limitations of different energy harvesting principles, advances, and findings of the recent past. This study also discusses some of the key ideas for the enhancement of power output. This paper provides a broad view of the energy harvesting system to the learners, which will facilitate them to design more efficient energy harvesting devices by using different principles.

scholarly journals Towards Bio-Hybrid Energy Harvesting in the Real-World: Pushing the Boundaries of Technologies and Strategies Using Bio-Electrochemical and Bio-Mechanical Processes

2021 ◽  
Vol 11 (5) ◽  
pp. 2220
Author(s):  
Abanti Shama Afroz ◽  
Donato Romano ◽  
Francesco Inglese ◽  
Cesare Stefanini
Keyword(s):  
Fuel Cells ◽  
Energy Harvesting ◽  
Microbial Fuel Cells ◽  
Large Scale ◽  
Green Energy ◽  
Future Research ◽  
Small Scale ◽  
Power Sources ◽  
Energy Harvesters ◽  
Living Organisms

Sustainable, green energy harvesting has gained a considerable amount of attention over the last few decades and within its vast field of resources, bio-energy harvesters have become promising. These bio-energy harvesters appear in a wide variety and function either by directly generating energy with mechanisms similar to living organisms or indirectly by extracting energy from living organisms. Presently this new generation of energy harvesters is fueling various low-power electronic devices while being extensively researched for large-scale applications. In this review we concentrate on recent progresses of the three promising bio-energy harvesters: microbial fuel cells, enzyme-based fuel cells and biomechanical energy harvesters. All three of these technologies are already extensively being used in small-scale applications. While microbial fuel cells hold immense potential in industrial-scale energy production, both enzyme-based fuel cells and biomechanical energy harvesters show promises of becoming independent and natural power sources for wearable and implantable devices for many living organisms including humans. Herein, we summarize the basic principles of these bio-energy harvesting technologies, outline their recent advancements and estimate the near future research trends.

Modeling, Analysis and Experimental Validation of an Electromagnetic Energy Harvesting Unit

2012 ◽  
Author(s):  
Yan Chen ◽  
Armaghan Salehian
Keyword(s):  
Energy Harvesting ◽  
Power Efficiency ◽  
Degrees Of Freedom ◽  
Electromagnetic Energy ◽  
Vibration Energy Harvesting ◽  
Energy Harvesters ◽  
Electromagnetic Energy Harvesting ◽  
Power Outputs ◽  
Experimental Values ◽  
Energy Harvesting Devices

Vibration energy harvesting devices have been widely used to power many electronic self-sustainable devices. Most traditional linear energy harvesters exploit the phenomenon of resonance to produce electric power. Nonlinear energy harvesters however present more interesting alternatives and have demonstrated capabilities to harvest power over a wider range of frequencies due to characteristics such as bifurcation. The aim of this study is to introduce an alternative design to nonlinear electromagnetic energy harvesting devices to improve the power production of the unit. The configuration presented in the current work has more degrees of freedom compared to some previously designed devices, and has demonstrated higher power efficiency over a wider range of frequencies. The power outputs for both previous and current designs are compared and validated against their experimental values. Finally, the validated numerical model is used to find the optimal design to produce the maximum power.

scholarly journals Response Identification in a Vibration Energy-Harvesting System with Quasi-Zero Stiffness and Two Potential Wells

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3926
Author(s):  
Joanna Iwaniec ◽  
Grzegorz Litak ◽  
Marek Iwaniec ◽  
Jerzy Margielewicz ◽  
Damian Gąska ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Recurrence Plot ◽  
Piezoelectric Transducers ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Potential Wells ◽  
Frequency Responses ◽  
Voltage Output ◽  
Quantification Analysis ◽  
Energy Harvesting System

In this paper, the frequency broadband effect in vibration energy harvesting was studied numerically using a quasi-zero stiffness resonator with two potential wells and piezoelectric transducers. Corresponding solutions were investigated for system excitation harmonics at various frequencies. Solutions for the higher voltage output were collected in specific branches of the power output diagram. Both the resonant solution synchronized with excitation and the frequency responses of the subharmonic spectra were found. The selected cases were illustrated and classified using a phase portrait, a Poincaré section, and recurrence plot (RP) approaches. Select recurrence quantification analysis (RQA) measures were used to characterize the discussed solutions.

scholarly journals A Study on the Energy-Harvesting Device with a Magnetic Spring for Improved Durability in High-Speed Trains

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 830
Author(s):  
Jaehoon Kim
Keyword(s):  
Energy Harvesting ◽  
High Speed ◽  
Permanent Magnets ◽  
Critical Issue ◽  
Sensor Nodes ◽  
High Speed Train ◽  
Vibration Energy Harvesting ◽  
Magnetic Spring ◽  
High Speed Trains ◽  
Energy Harvesting Devices

Durability is a critical issue concerning energy-harvesting devices. Despite the energy-harvesting device’s excellent performance, moving components, such as the metal spring, can be damaged during operation. To solve the durability problem of the metal spring in a vibration-energy-harvesting (VEH) device, this study applied a non-contact magnetic spring to a VEH device using the repulsive force of permanent magnets. A laboratory experiment was conducted to determine the potential energy-harvesting power using the magnetic spring VEH device. In addition, the characteristics of the generated power were studied using the magnetic spring VEH device in a high-speed train traveling at 300 km/h. Through the high-speed train experiment, the power generated by both the metal spring VEH device and magnetic spring VEH device was measured, and the performance characteristics required for a power source for wireless sensor nodes in high-speed trains are discussed.

A Creative Vibration Energy Harvesting System to Support a Self-Powered Internet of Thing (IoT) Network in Smart Bridge Monitoring

2020 ◽  
Author(s):  
Saman Farhangdoust ◽  
Claudia Mederos ◽  
Behrouz Farkiani ◽  
Armin Mehrabi ◽  
Hossein Taheri ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Cantilever Beam ◽  
Average Power ◽  
Electrical Energy ◽  
Laser Vibrometer ◽  
Stay Cable ◽  
Fe Modelling ◽  
Vibration Energy Harvesting ◽  
Piezoelectric Energy ◽  
Energy Harvesting System

Abstract This paper presents a creative energy harvesting system using a bimorph piezoelectric cantilever-beam to power wireless sensors in an IoT network for the Sunshine Skyway Bridge. The bimorph piezoelectric energy harvester (BPEH) comprises a cantilever beam as a substrate sandwiched between two piezoelectric layers to remarkably harness ambient vibrations of an inclined stay cable and convert them into electrical energy when the cable is subjected to a harmonic acceleration. To investigate and design the bridge energy harvesting system, a field measurement was required for collecting cable vibration data. The results of a non-contact laser vibrometer is used to remotely measure the dynamic characteristics of the inclined cables. A finite element study is employed to simulate a 3-D model of the proposed BPEH by COMSOL Multiphasics. The FE modelling results showed that the average power generated by the BPEH excited by a harmonic acceleration of 1 m/s2 at 1 Hz is up to 614 μW which satisfies the minimum electric power required for the sensor node in the proposed IoT network. In this research a LoRaWAN architecture is also developed to utilize the BPEH as a sustainable and sufficient power resource for an IoT platform which uses wireless sensor networks installed on the bridge stay cables to collect and remotely transfer bridge health monitoring data over the bridge in a low-power manner.

scholarly journals Analysis of Double Elastic Steel Wind Driven Magneto-Electric Vibration Energy Harvesting System

Sensors ◽  
2021 ◽  
Vol 21 (21) ◽  
pp. 7364
Author(s):  
Yi-Ren Wang ◽  
Ming-Ching Chu
Keyword(s):  
Energy Harvesting ◽  
Electric Energy ◽  
Elastic Beam ◽  
Electrical Energy ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Concentrated Load ◽  
Single Beam ◽  
Piezoelectric Patch ◽  
Energy Harvesting System

This research proposes an energy harvesting system that collects the downward airflow from a helicopter or a multi-axis unmanned rotary-wing aircraft and uses this wind force to drive the magnet to rotate, generating repulsive force, which causes the double elastic steel system to slap each other and vibrate periodically in order to generate more electricity than the traditional energy harvesting system. The design concept of the vibration mechanism in this study is to allow the elastic steel carrying the magnet to slap another elastic steel carrying the piezoelectric patch to form a set of double elastic steel vibration energy harvesting (DES VEH) systems. The theoretical DES VEH mechanism of this research is composed of a pair of cantilever beams, with magnets attached to the free end of one beam, and PZT attached to the other beam. This study analyzes the single beam system first. The MOMS method is applied to analyze the frequency response of this nonlinear system theoretically, then combines the piezoelectric patch and the magneto-electric coupling device with this nonlinear elastic beam to analyze the benefits of the system’s converted electrical energy. In the theoretical study of the DES VEH system, the slapping force between the two elastic beams was considered as a concentrated load on each of the beams. Furthermore, both SES and DES VEH systems are studied and correlated. Finally, the experimental data and theoretical results are compared to verify the feasibility and correctness of the theory. It is proven that this DES VEH system can not only obtain the electric energy from the traditional SES VEH system but also obtain the extra electric energy of the steel vibration subjected to the slapping force, which generates optimal power to the greatest extent.

scholarly journals Enhanced low-frequency vibration energy harvesting with inertial amplifiers

2021 ◽  
pp. 1045389X2110322
Author(s):  
Sondipon Adhikari ◽  
Arnab Banerjee
Keyword(s):  
Low Frequency ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Micro Scale ◽  
Energy Harvesters ◽  
Low Frequency Vibration ◽  
Different Types ◽  
Mechanical Approach ◽  
Ambient Excitation ◽  
Piezoelectric Vibration

Piezoelectric vibration energy harvesters have demonstrated the potential for sustainable energy generation from diverse ambient sources in the context of low-powered micro-scale systems. However, challenges remain concerning harvesting more power from low-frequency input excitations and broadband random excitations. To address this, here we propose a purely mechanical approach by employing inertial amplifiers with cantilever piezoelectric vibration energy harvesters. The proposed mechanism can achieve inertial amplification amounting to orders of magnitude under certain conditions. Harmonic, as well as broadband random excitations, are considered. Two types of harvesting circuits, namely, without and with an inductor, have been employed. We explicitly demonstrate how different parameters describing the inertial amplifiers should be optimally tuned to maximise harvested power under different types of excitations and circuit configurations. It is possible to harvest five times more power at a 50% lower frequency when the ambient excitation is harmonic. Under random broadband ambient excitations, it is possible to harvest 10 times more power with optimally selected parameters.

Sign in / Sign up

Export Citation Format

Share Document