scholarly journals Equilibrium, Kinetics, and Thermodynamics of the Removal of Nickel(II) from Aqueous Solution Using Cow Hooves

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
I. Osasona ◽  
O. O. Ajayi ◽  
A. O. Adebayo
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Room Temperature ◽  
Physical Adsorption ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Equilibrium Data

The feasibility of using powdered cow hooves (CH) for removing Ni2+ from aqueous solution was investigated through batch studies. The study was conducted to determine the effect of pH, adsorbent dosage, contact time, adsorbent particle size, and temperature on the adsorption capacity of CH. Equilibrium studies were conducted using initial concentration of Ni2+ ranging from 15 to 100 mgL−1 at 208, 308, and 318 K, respectively. The results of our investigation at room temperature indicated that maximum adsorption of Ni2+ occurred at pH 7 and contact time of 20 minutes. The thermodynamics of the adsorption of Ni2+ onto CH showed that the process was spontaneous and endothermic. Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm models were used to quantitatively analysed the equilibrium data. The equilibrium data were best fitted by Freundlich isotherm model, while the adsorption kinetics was well described by pseudo-second-order kinetic equation. The mean adsorption energy obtained from the D-R isotherm revealed that the adsorption process was dominated by physical adsorption. Powdered cow hooves could be utilized as a low-cost adsorbent at room temperature under the conditions of pH 7 and a contact time of 20 minutes for the removal of Ni(II) from aqueous solution.

scholarly journals Biosorption of Cr(III) from aqueous solution using an agricultural by-product jute stick powder: Equilibrium and kinetic studies

2018 ◽  
Vol 9 (3) ◽  
pp. 202-212 ◽  
Author(s):  
Mohammad Nasir Uddin ◽  
Jahangir Alam ◽  
Syeda Rahimon Naher
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Metal Ion ◽  
Water Solution ◽  
Low Cost ◽  
Isotherm Models ◽  
Infrared Spectrometry ◽  
Order Kinetic ◽  
Adsorption Model ◽  
Experimental Conditions

The adsorption capacity of chromium(III) from synthetic waste water solution by a low cost biomaterial, Jute Stick Powder (JSP)was examined. A series of batch experiments were conducted at different pH values, adsorbent dosage and initial chromium concentration to investigate the effects of these experimental conditions. To analyze the metal adsorption on to the JSP, most common adsorption isotherm models were applied. To study the reaction rate, the kinetic and diffusion models were also applied. The morphological structure and variation of functional groups in the JSP before and after adsorption was examined by scanning electron microscope (SEM) and Fourier transform infrared spectrometry (FT-IR). Maximum chromium removal capacities of JSP was 84.34%with corresponding equilibrium uptake 8.4 mg/g from 50 mg/L of synthetic metal solution in 60 minutes of contact time at pH = 6.0 and 28 °C with continuous stirring at 180 rpm. The percent sorption of the biomass decreased with increasing concentration of metal ion but increased with decreasing pH, increasing contact time and adsorbent doses. Data for this study indicated a good correspondence with both isotherms of Langmuir and Freundlich isotherm. The analysis of kinetic indicated that Chromium was consistent with the second-order kinetic adsorption model. The rate of removal of Cr(III) ions from aqueous solution by JSP was found rapid initially within 5-30 minutes and reached in equilibrium in about 40 minutes. The investigation revealed that JSP, a low cost agricultural byproduct, was a potential adsorbent for removal of heavy metal ions from aqueous solution.

scholarly journals Kush - A Potential Biosorbent in the removal of Cd (II) and Zn (II) from aqueous solution

2012 ◽  
Vol 27 ◽  
pp. 107-114
Author(s):  
Jagjit Kour ◽  
P. L. Homagai ◽  
M. R. Pokherel ◽  
K. N. Ghimire
Keyword(s):  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Waste Streams ◽  
Adsorption Capacities ◽  
Optimum Ph ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

The industrial discharge of heavy metals into waters' course is one of the major pollution problems affecting water quality. Therefore, they must be removed prior to their discharge into waste streams. An efficient and low-cost bioadsorbent has been investigated from Desmostachya bipinnata (Kush) by charring with concentrated sulphuric acid and functionalized with dimethylamine.It was characterised by SEM, FTIR and elemental analysis. The effect of pH, initial concentration and contact time of the metal solution was monitered by batch method. The maximum adsorption capacities were determined for Cd and Zn at their optimum pH 6. The equilibrium data were analysed using Langmuir and Freundlich isotherm models. Langmuir isotherm model fitted well and the rate of adsorption followed the pseudo second order kinetic equation.DOI: http://dx.doi.org/10.3126/jncs.v27i1.6669 J. Nepal Chem. Soc., Vol. 27, 2011 107-114  

scholarly journals The efficiency of nano-TiO2 and γ-Al2O3 in copper removal from aqueous solution by characterization and adsorption study

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Fatemeh Ezati ◽  
Ebrahim Sepehr ◽  
Fatemeh Ahmadi
Keyword(s):  
Aqueous Solution ◽  
Ionic Strength ◽  
Ph Value ◽  
Physical Adsorption ◽  
Geochemical Modeling ◽  
Low Cost ◽  
Background Electrolyte ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Equilibrium Data

AbstractWater pollution is a major global challenge given the increasing growth in the industry and the human population. The present study aims to investigate the efficiency of TiO2 and γ-Al2O3 nanoadsorbents for removal of copper (Cu(II)) from aqueous solution as influenced by different chemical factors including pH, initial concentration, background electrolyte and, ionic strength. The batch adsorption experiment was performed according to standard experimental methods. Various isotherm models (Freundlich, Langmuir, Temkin, and Dubinin–Radushkevich) were fitted to the equilibrium data. According to geochemical modeling data, adsorption was a predominant mechanism for Cu(II) removal from aqueous solution. Calculated isotherm equations parameters were evidence of the physical adsorption mechanism of Cu(II) onto the surface of the nanoparticles. The Freundlich adsorption isotherm model could well fit the experimental equilibrium data at different pH values. The maximum monolayer adsorption capacity of TiO2 and γ-Al2O3 nanosorbents were found to 9288 and 3607 mg kg−1 at the highest pH value (pH 8) and the highest initial Cu(II) concentration (80 mg L−1) respectively. Copper )Cu(II) (removal efficiency with TiO2 and γ-Al2O3 nanoparticles increased by increasing pH. Copper )Cu(II) (adsorption deceased by increasing ionic strength. The maximum Cu(II) adsorption (4510 mg kg−1) with TiO2 nanoparticles was found at 0.01 M ionic strength in the presence of NaCl. Thermodynamic calculations show the adsorption of Cu(II) ions onto the nanoparticles was spontaneous in nature. Titanium oxide (TiO2) nanosorbents could, therefore, serve as an efficient and low-cost nanomaterial for the remediation of Cu(II) ions polluted aqueous solutions.

scholarly journals Equilibrium, Kinetics, and Thermodynamics of the Biosorption of Zn(II) from Aqueous Solution Using Powdered Cow Hooves

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Ilesanmi Osasona ◽  
Olubode O. Ajayi ◽  
Albert O. Adebayo
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Kinetic Equations ◽  
Mesh Size ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Solution Ph ◽  
Equilibrium Studies ◽  
Biosorption Process ◽  
Increase With Increase

The capability of cow hoof (CH) to remove Zn(II) from aqueous solution under the influence of sorbent size, solution pH, contact time, and sorbent dosage was investigated through batch studies. Equilibrium studies were conducted at three different temperatures (298, 308, and 318 K) by contacting different concentrations of Zn(II) solution with a known weight of cow hoof. The biosorption of Zn onto cow hoof was found to increase with increase in the mass of sorbent used while the biosorption efficiency was found to decrease with increase in sorbent particle size. The optimum conditions of pH 4 and contact time of 60 minutes were required for maximum removal of Zn(II) by cow hoof (mesh size 212 µm). The equilibrium data were modelled using Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm models. The data were best fitted by Langmuir model. The kinetic data were analysed using Lagergren kinetic equations and these were well fitted by the pseudo-second-order kinetic model. The thermodynamic parameters showed that the biosorption process was feasible, spontaneous, and endothermic.

scholarly journals ADSORPTION OF FLUORIDE USING SIO2 NANOPARTICLES AS ADSORBENT

2020 ◽  
Vol 2 (2) ◽  
pp. 1-9
Author(s):  
Davoud Balarak ◽  
Yousef Mahdavi ◽  
Ali Joghatayi
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Sio2 Nanoparticles ◽  
Second Order ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Initial Concentration ◽  
High Doses

Presence of Fluoride in water is safe and effective when used as directed, but it can be harmful at high doses. In the present paper SiO2 nanoparticles as a adsorbent is used for removal of fluoride from aqueous solution. The effect of various operating parameters such as initial concentration of F-, Contact time, adsorbent dosage and pH were investigated. Equilibrium isotherms were used to identify the possible mechanism of the adsorption process. Maximum adsorption capacity of the SiO2 nanoparticles was 49.95 mg/g at PH=6, contact time 20 min, initial concentration of 25 mg/L, and 25±2 ◦C temperatures, when 99.4% of Fwere removed. The adsorption equilibriums were analyzed by Langmuir and Freundlich isotherm models. It was found that the data fitted to Langmuir (R2=0.992) better than Freundlich (R2=0.943) model. Kinetic analyses were conducted using pseudo first-and second-order models. The regression results showed that the adsorption kinetics was more accurately represented by a pseudo second-order model. These results indicate that SiO2 nanoparticles can be used as an effective, low-cost adsorbent to remove fluoride from aqueous solution.

scholarly journals Adsorption of Methylene Blue from aqueous solution using Senegal River Typha australis

2020 ◽  
Vol 10 (1) ◽  
pp. 22-32
Author(s):  
Abdoulaye Demba N'diaye ◽  
Youcef Aoulad El Hadj Ali ◽  
Mohamed Abdallahi Bollahi ◽  
Mostafa Stitou ◽  
Mohamed Kankou ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Low Cost ◽  
Activation Parameters ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Senegal River ◽  
Typha Australis ◽  
Equilibrium Data

In this work, batch adsorption experiments were carried out for the removal of Methylene Blue (MB) from aqueous solutions using Typha australis leaf as a low cost adsorbent. The effects of some variables governing the efficiency of the process such as adsorbent mass, pH, ionic strength, contact time and temperature were investigated. The adsorption kinetic data were analyzed using the Pseudo First Order (PFO) and Pseudo Second Order (PSO) models. The experimental equilibrium data were analyzed using Langmuir and Freundlich isotherm models. The results show that the PSO model is the best for describing the adsorption of MB by Typha australis for all initial MB concentrations. The equilibrium data fitted well with the Langmuir model with the monolayer adsorption capacity for MB-Typha australis leaf system was of 103.12 mg g-1. The values of activation parameters such as free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) were also determined as - 4.44 kJ mol−1, 55.13 kJ mol−1 and 203.21 J mol−1 K−1, respectively. The thermodynamics parameters of MB-Typha australis system indicate spontaneous and endothermic process. These results indicate that the Typha australis leaf can be feasibly employed for the eradication of MB from aqueous solution.

Charcoal Prepared from Bougainvillea spectabilis Leaves as Low Cost Adsorbent: Kinetic and Equilibrium Studies for Removal of Iron from Aqueous Solution

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Arif Nazir ◽  
Farwa Zahra ◽  
Muhammad Usman Sabri ◽  
Abdul Ghaffar ◽  
Abdul Qayyum Ather ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Low Cost ◽  
Industrial Effluents ◽  
Order Kinetic ◽  
Isothermal Model ◽  
Equilibrium Studies ◽  
Iron Metal ◽  
Bougainvillea Spectabilis ◽  
Adsorbent Dose

Abstract Biosorption is one of the effective technique for removal of metals from aqueous solutions/industrial effluents. Present work is aimed to use low cost and ecofriendly material to remove the iron metal from aqueous solution which could possibly be used at industrial level. For this purpose, Bougainvillea spectabilis leaves were used for the production of charcoal. This charcoal was activated using HCl and HNO3. The AC shows promising efficiency for the adsorption of Fe II as a function of medium pH, contact time, adsorbent dose and temperature. Maximum adsorption was observed with 0.5–0.9 g adsorbent dose, 30 min contact time and at pH 3. Adsorption showed independence of temperature in the range of 30–70 °C. Among, Freundlich and Langmuir isotherms, the adsorbate followed Langmuir isothermal model. Among kinetics models, adsorbate followed pseudo second order kinetic model with R2 values of 0.9985 and 0.9996 for HCl treated and HNO3 treated AC, respectively. These data suggest that AC synthesized from Bougainvillea leaves proved to be an excellent adsorbent for the removal of iron metal from aqueous solution.

scholarly journals Removal of Copper (II) Ions from Aqueous Solutions by Adsorption with Low Cost Acid Activated Cynodon Dactylon Carbon

2011 ◽  
Vol 8 (s1) ◽  
pp. S377-S391 ◽  
Author(s):  
U. Gayathri ◽  
B. R. Venkatraman ◽  
S. Arivoli
Keyword(s):  
Aqueous Solution ◽  
Cynodon Dactylon ◽  
Low Cost ◽  
Copper Ion ◽  
Freundlich Isotherm ◽  
Experimental Results ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Model Parameters ◽  
Equilibrium Data

The main purpose of this work was to exploit low cost and efficient sorbents for the removal of copper from aqueous solution usingCynodon dactyloncarbon. It was observed from the experimental results that almost 90-100% copper can be removed from the aqueous solution. Adsorption kinetics and equilibrium have been investigated as a function of initial copper ion concentration. pH, contact time and adsorbent dosage. Kinetics studies suggested that the adsorption allowed first order reaction. Equilibrium data were analyzed using Langmuir and Freundlich isotherm models. On the basis of experimental results and the model parameters, it can be concluded that the carbonaceousCynodon dactylonis effective for the removal of copper ion from aqueous solution.

scholarly journals Activated Carbon from Spent Brewery Barley Husks for Cadmium Ion Adsorption from Aqueous Solution

2018 ◽  
Vol 18 (1) ◽  
pp. 145 ◽  
Author(s):  
Ilesanmi Osasona ◽  
Kayode Aiyedatiwa ◽  
Jonathan Johnson ◽  
Oluwabamise Lekan Faboya
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Solution Concentration ◽  
Isotherm Models ◽  
Cadmium Ion ◽  
Solution Ph ◽  
Barley Husk ◽  
Equilibrium Data

This study investigated the feasibility of using acid activated carbon prepared from brewery spent barley husks for the adsorption of cadmium from aqueous solution. The effects of operation parameters such as pH, contact time, adsorbent dosage, concentration and temperature were verified. The amount of cadmium adsorbed increased with increase in solution pH, initial solution concentration and with the amount of adsorbent dosed. A time of 5 minutes was required for attainment of equilibrium. The equilibrium data obtained were analysed using both Langmuir and Freundlich isotherm models and the data were better described by Langmuir model with correlation coefficient of 0.9183. The thermodynamic parameters revealed that the removal of cadmium by the activated carbon was exothermic and spontaneous. Thus, activated carbon obtained from brewery spent barley husk can be employed as an economically viable low-cost adsorbent for removing cadmium from aqueous solution. 

scholarly journals Adsorption of Phosphate from Aqueous Solution onto Iron-coated Waste Mussel Shell: Physicochemical Characteristics, Kinetic, and Isotherm Studies

2021 ◽  
Vol 11 (5) ◽  
pp. 12831-12842
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Physicochemical Characteristics ◽  
Order Kinetic ◽  
Mussel Shell ◽  
Order Kinetic Model ◽  
Synthetic Solution ◽  
Pseudo Second Order

High amounts of phosphate (PO43–) discharged in receiving water can lead to eutrophication, which endangers life below water and human health. This study elucidates the removal of PO43– from synthetic solution by iron-coated waste mussel shell (ICWMS). The PO43– adsorption by ICWMS was determined at different process parameters, such as initial PO43– concentration (7 mg L−1), solution volume (0.2 L), adsorbent dosage (4, 8, 12, 16, and 20 g), and contact time. The highest efficiency of PO43− removal can reach 96.9% with an adsorption capacity of 0.30 mg g−1 could be obtained after a contact time of 48 h for the use of 20 g of ICWMS. Batch experimental data can be well described by the pseudo-second-order kinetic model (R2 = 0.999) and Freundlich isotherm model (R2 = 0.996), suggesting that chemisorption and multilayer adsorption occurred. The efficiency of PO43– removal from aqueous solution by ICWMS was verified to contribute to applying a new low-cost adsorbent obtained from waste mussel shell in the field of wastewater treatment.

Sign in / Sign up

Export Citation Format

Share Document