scholarly journals Vertebral Stenting and Vertebroplasty Guided by an Angiographic 3D Rotational Unit

2015 ◽  
Vol 2015 ◽  
pp. 1-7
Author(s):  
Escobar-de la Garma Víctor Hugo ◽  
Jorge-Barroso Henry Luis ◽  
Padilla-Vázquez Felipe ◽  
Balderrama-Bañares Jorge Luis
Keyword(s):  
Imaging System ◽  
Three Dimensional ◽  
Compression Fracture ◽  
Needle Insertion ◽  
Lumbar Pain ◽  
High Quality ◽  
Interventional Imaging ◽  
Flat Panel Detectors ◽  
High Resolution Images ◽  
Guide Needle

Introduction. Use of interventional imaging systems in minimally invasion procedures such as kyphoplasty and vertebroplasty gives the advantage of high-resolution images, various zoom levels, different working angles, and intraprocedure image processing such as three-dimensional reconstructions to minimize complication rate. Due to the recent technological improvement of rotational angiographic units (RAU) with flat-panel detectors, the useful interventional features of CT have been combined with high-quality fluoroscopy into one single machine. Intraprocedural 3D images offer an alternative way to guide needle insertion and the safe injection of cement to avoid leakages.Case Report. We present the case of a 72-year-old female patient with insidious lumbar pain. Computed tomography revealed a wedge-shaped osteoporotic compression fracture of T10 vertebrae, which was treated successfully with the installation of vertebral stenting system and vertebroplasty with methacrylate guided with a rotational interventional imaging system.Conclusion. Rotational angiographic technology may provide a suitable place for the realization of high-quality minimally invasive spinal procedures, such as kyphoplasty, vertebroplasty, and vertebral stenting. New software programs available nowadays offer the option to make three-dimensional reconstructions with no need of CT scans with the same degree of specificity.

scholarly journals Application of Photoacoustic Imaging for Lymphedema Treatment

2021 ◽  
Author(s):  
Yushi Suzuki ◽  
Hiroki Kajita ◽  
Shiho Watanabe ◽  
Keisuke Okabe ◽  
Hisashi Sakuma ◽  
...  
Keyword(s):  
High Resolution ◽  
Imaging System ◽  
Photoacoustic Imaging ◽  
Three Dimensional ◽  
Lymphatic Vessels ◽  
Small Diameter ◽  
Detailed Structure ◽  
High Resolution Images ◽  
Major Application ◽  
Lymph Fluid

Abstract Background Lymphatic vessels are difficult to identify using existing modalities as because of their small diameter and the transparency of the lymph fluid flowing through them. Methods Here, we introduce photoacoustic lymphangiography (PAL), a new modality widely used for lymphedema treatment, to observe limb lymphatic vessels. The photoacoustic imaging system used in this study can simultaneously visualize lymphatic vessels and veins with a high resolution (0.2 mm) and can also observe their three-dimensional relationship with each other. Results High-resolution images of the lymphatic vessels, detailed structure of the dermal back flow, and the three-dimensional positional relationship between the lymphatic vessels and veins were observed by PAL. Conclusion The clear image provided by PAL could have a major application in pre- and postoperative use during lymphaticovenular anastomosis for lymphedema treatment.

Electron crystallographic determination of the 3-D structure of staurolite at atomic resolution

1991 ◽  
Vol 49 ◽  
pp. 540-541
Author(s):  
Kenneth H. Downing ◽  
Hu Meisheng ◽  
Hans-Rudolf Went ◽  
Michael A. O'Keefe
Keyword(s):  
High Resolution ◽  
Three Dimensional ◽  
High Resolution Electron Microscopy ◽  
Atomic Resolution ◽  
Dimensional Structure ◽  
Structure Information ◽  
Resolution Electron ◽  
Scattering Effects ◽  
High Resolution Images ◽  
Effects Of Radiation

With current advances in electron microscope design, high resolution electron microscopy has become routine, and point resolutions of better than 2Å have been obtained in images of many inorganic crystals. Although this resolution is sufficient to resolve interatomic spacings, interpretation generally requires comparison of experimental images with calculations. Since the images are two-dimensional representations of projections of the full three-dimensional structure, information is invariably lost in the overlapping images of atoms at various heights. The technique of electron crystallography, in which information from several views of a crystal is combined, has been developed to obtain three-dimensional information on proteins. The resolution in images of proteins is severely limited by effects of radiation damage. In principle, atomic-resolution, 3D reconstructions should be obtainable from specimens that are resistant to damage. The most serious problem would appear to be in obtaining high-resolution images from areas that are thin enough that dynamical scattering effects can be ignored.

Conformational Transitions in Escherichia coli Ribosomal RNAs as Visualized by Dedicated STEM

1988 ◽  
Vol 46 ◽  
pp. 176-177
Author(s):  
J.S. Wall ◽  
V. Maridiyan ◽  
S. Tumminia ◽  
J. Hairifeld ◽  
M. Boublik
Keyword(s):  
Ionic Strength ◽  
Three Dimensional ◽  
Conformational Transitions ◽  
Dark Field ◽  
Dimensional Structure ◽  
Ribosomal Rnas ◽  
Field Mode ◽  
Freeze Dried ◽  
High Resolution Images ◽  
Low Ionic Strength

The high contrast in the dark-field mode of dedicated STEM, specimen deposition by the wet film technique and low radiation dose (1 e/Å2) at -160°C make it possible to obtain high resolution images of unstained freeze-dried macromolecules with minimal structural distortion. Since the image intensity is directly related to the local projected mass of the specimen it became feasible to determine the molecular mass and mass distribution within individual macromolecules and from these data to calculate the linear density (M/L) and the radii of gyration.2 This parameter (RQ), reflecting the three-dimensional structure of the macromolecular particles in solution, has been applied to monitor the conformational transitions in E. coli 16S and 23S ribosomal RNAs in solutions of various ionic strength.In spite of the differences in mass (550 kD and 1050 kD, respectively), both 16S and 23S RNA appear equally sensitive to changes in buffer conditions. In deionized water or conditions of extremely low ionic strength both appear as filamentous structures (Fig. la and 2a, respectively) possessing a major backbone with protruding branches which are more frequent and more complex in 23S RNA (Fig. 2a).

An experience of elaboration and implementation of systems of slag-forming mixtures mechanized feeding into CCM moulds

2020 ◽  
Vol 76 (10) ◽  
pp. 994-1003
Author(s):  
S. P. Eron’ko ◽  
M. Yu. Tkachev ◽  
E. V. Oshovskaya ◽  
B. I. Starodubtsev ◽  
S. V. Mechik
Keyword(s):  
Economic Effect ◽  
Three Dimensional ◽  
Movable Part ◽  
High Quality ◽  
Working Zone ◽  
Fine Material ◽  
Mixing Chamber ◽  
Field Samples ◽  
Technical Solutions ◽  
Feeding Systems

Effective application of slag-forming mixtures (SFM), being fed into continuous castingg machine (CCM) moulds, depends on their even distribution on the melt surface. Manual feeding of the SFM which is widely usedd does not provide this condition, resulting in the necessity to actualize the work to elaborate systems of SFM mechanized feedingg into moulds of various types CCM. A concept of the designing of a system of SFM feeding into CCM moulds presented with the ratte strictly correspondent to the casting speed and providing formation of an even layer of fine material of given thickness on the whoole surface of liquid steel. The proposed methods of designing of the SFM mechanized feeding systems based on three-dimensional computer simulation with the subsequent verification of the correctness of the adopted technical solutions on field samples. Informattion is presented on the design features of the adjusted facilities intended for continuous supply of finely granulated and powder mixtuures on metal mirror in moulds at the production of high-quality billets, blooms and slabs. Variants of mechanical and pneumo-mechaanical SFM supply elaborated. At the mechanical supply the fine material from the feeding hopper is moved at a adjusted distance bby a rigid horizontally located screw. At the pneumo-mechanical supply the metered doze of the granular mixture is delivered by a sshort vertical screw, the lower part of which is located in the mixing chamber attached from below to the hopper and equipped with ann ejector serving for pneumatic supply of the SFM in a stream of transporting gas. It was proposed to use flexible spiral screws in the ffuture facilities of mechanical SFM feeding. It will enable to eliminate the restrictions stipulated by the lack of free surface for locatiion of the facility in the working zone of the tundish, as well as to decrease significantly the mass of its movable part and to decreaase the necessary power of the carriage moving mechanism driver. The novelty of the proposed technical solutions is protected by thhree patents. The reduction of 10–15% in the consumption of slag-forming mixtures during the transition from manual to mechanizeed feeding confirmed. The resulting economic effect from the implementation of technical development enables to recoup the costs inncurred within 8–10 months.

scholarly journals Estimating intrafraction tumor motion during fiducial-based liver stereotactic radiotherapy via an iterative closest point (ICP) algorithm

2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Wu-zhou Li ◽  
Zhi-wen Liang ◽  
Yi Cao ◽  
Ting-ting Cao ◽  
Hong Quan ◽  
...  
Keyword(s):  
Stereotactic Radiotherapy ◽  
Imaging System ◽  
Liver Tumors ◽  
Three Dimensional ◽  
Rigid Motion ◽  
Iterative Closest Point ◽  
Tumor Motion ◽  
Tracking Accuracy ◽  
Icp Algorithm ◽  
Anterior Posterior

Abstract Background Tumor motion may compromise the accuracy of liver stereotactic radiotherapy. In order to carry out a precise planning, estimating liver tumor motion during radiotherapy has received a lot of attention. Previous approach may have difficult to deal with image data corrupted by noise. The iterative closest point (ICP) algorithm is widely used for estimating the rigid registration of three-dimensional point sets when these data were dense or corrupted. In the light of this, our study estimated the three-dimensional (3D) rigid motion of liver tumors during stereotactic liver radiotherapy using reconstructed 3D coordinates of fiducials based on the ICP algorithm. Methods Four hundred ninety-five pairs of orthogonal kilovoltage (KV) images from the CyberKnife stereo imaging system for 12 patients were used in this study. For each pair of images, the 3D coordinates of fiducial markers inside the liver were calculated via geometric derivations. The 3D coordinates were used to calculate the real-time translational and rotational motion of liver tumors around three axes via an ICP algorithm. The residual error was also investigated both with and without rotational correction. Results The translational shifts of liver tumors in left-right (LR), anterior-posterior (AP),and superior-inferior (SI) directions were 2.92 ± 1.98 mm, 5.54 ± 3.12 mm, and 16.22 ± 5.86 mm, respectively; the rotational angles in left-right (LR), anterior-posterior (AP), and superior-inferior (SI) directions were 3.95° ± 3.08°, 4.93° ± 2.90°, and 4.09° ± 1.99°, respectively. Rotational correction decreased 3D fiducial displacement from 1.19 ± 0.35 mm to 0.65 ± 0.24 mm (P<0.001). Conclusions The maximum translational movement occurred in the SI direction. Rotational correction decreased fiducial displacements and increased tumor tracking accuracy.

scholarly journals Validation of Scolioscan Air-Portable Radiation-Free Three-Dimensional Ultrasound Imaging Assessment System for Scoliosis

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2858
Author(s):  
Kelly Ka-Lee Lai ◽  
Timothy Tin-Yan Lee ◽  
Michael Ka-Shing Lee ◽  
Joseph Chi-Ho Hui ◽  
Yong-Ping Zheng
Keyword(s):  
Ultrasound Imaging ◽  
Imaging System ◽  
Outcome Measurement ◽  
Three Dimensional ◽  
3D Ultrasound ◽  
Mean Difference ◽  
Assessment System ◽  
Absolute Difference ◽  
Data Sets ◽  
Low Profile

To diagnose scoliosis, the standing radiograph with Cobb’s method is the gold standard for clinical practice. Recently, three-dimensional (3D) ultrasound imaging, which is radiation-free and inexpensive, has been demonstrated to be reliable for the assessment of scoliosis and validated by several groups. A portable 3D ultrasound system for scoliosis assessment is very much demanded, as it can further extend its potential applications for scoliosis screening, diagnosis, monitoring, treatment outcome measurement, and progress prediction. The aim of this study was to investigate the reliability of a newly developed portable 3D ultrasound imaging system, Scolioscan Air, for scoliosis assessment using coronal images it generated. The system was comprised of a handheld probe and tablet PC linking with a USB cable, and the probe further included a palm-sized ultrasound module together with a low-profile optical spatial sensor. A plastic phantom with three different angle structures built-in was used to evaluate the accuracy of measurement by positioning in 10 different orientations. Then, 19 volunteers with scoliosis (13F and 6M; Age: 13.6 ± 3.2 years) with different severity of scoliosis were assessed. Each subject underwent scanning by a commercially available 3D ultrasound imaging system, Scolioscan, and the portable 3D ultrasound imaging system, with the same posture on the same date. The spinal process angles (SPA) were measured in the coronal images formed by both systems and compared with each other. The angle phantom measurement showed the measured angles well agreed with the designed values, 59.7 ± 2.9 vs. 60 degrees, 40.8 ± 1.9 vs. 40 degrees, and 20.9 ± 2.1 vs. 20 degrees. For the subject tests, results demonstrated that there was a very good agreement between the angles obtained by the two systems, with a strong correlation (R2 = 0.78) for the 29 curves measured. The absolute difference between the two data sets was 2.9 ± 1.8 degrees. In addition, there was a small mean difference of 1.2 degrees, and the differences were symmetrically distributed around the mean difference according to the Bland–Altman test. Scolioscan Air was sufficiently comparable to Scolioscan in scoliosis assessment, overcoming the space limitation of Scolioscan and thus providing wider applications. Further studies involving a larger number of subjects are worthwhile to demonstrate its potential clinical values for the management of scoliosis.

scholarly journals Generation and Annotation of Simulation-Real Ship Images for Convolutional Neural Networks Training and Testing

2021 ◽  
Vol 11 (13) ◽  
pp. 5931
Author(s):  
Ji’an You ◽  
Zhaozheng Hu ◽  
Chao Peng ◽  
Zhiqiang Wang
Keyword(s):  
Neural Networks ◽  
Convolutional Neural Networks ◽  
Image Annotation ◽  
Three Dimensional ◽  
Image Data ◽  
Detection Algorithm ◽  
Simulation Software ◽  
High Quality ◽  
Annotation Method ◽  
Detection Of Objects

Large amounts of high-quality image data are the basis and premise of the high accuracy detection of objects in the field of convolutional neural networks (CNN). It is challenging to collect various high-quality ship image data based on the marine environment. A novel method based on CNN is proposed to generate a large number of high-quality ship images to address this. We obtained ship images with different perspectives and different sizes by adjusting the ships’ postures and sizes in three-dimensional (3D) simulation software, then 3D ship data were transformed into 2D ship image according to the principle of pinhole imaging. We selected specific experimental scenes as background images, and the target ships of the 2D ship images were superimposed onto the background images to generate “Simulation–Real” ship images (named SRS images hereafter). Additionally, an image annotation method based on SRS images was designed. Finally, the target detection algorithm based on CNN was used to train and test the generated SRS images. The proposed method is suitable for generating a large number of high-quality ship image samples and annotation data of corresponding ship images quickly to significantly improve the accuracy of ship detection. The annotation method proposed is superior to the annotation methods that label images with the image annotation software of Label-me and Label-img in terms of labeling the SRS images.

scholarly journals Partial aperture imaging system based on sparse point spread holograms and nonlinear cross-correlations

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Angika Bulbul ◽  
Joseph Rosen
Keyword(s):  
Structural Changes ◽  
Imaging System ◽  
Current System ◽  
Three Dimensional ◽  
Phase Mask ◽  
Coded Aperture ◽  
Space Telescopes ◽  
Reconstruction Process ◽  
Cross Correlations ◽  
Equivalent Systems

AbstractPartial aperture imaging system (PAIS) is a recently developed concept in which the traditional disc-shaped aperture is replaced by an aperture with a much smaller area and yet its imaging capabilities are comparable to the full aperture systems. Recently PAIS was demonstrated as an indirect incoherent digital three-dimensional imaging technique. Later it was successfully implemented in the study of the synthetic marginal aperture with revolving telescopes (SMART) to provide superresolution with subaperture area that was less than one percent of the area of the full synthetic disc-shaped aperture. In the study of SMART, the concept of PAIS was tested by placing eight coded phase reflectors along the boundary of the full synthetic aperture. In the current study, various improvements of PAIS are tested and its performance is compared with the other equivalent systems. Among the structural changes, we test ring-shaped eight coded phase subapertures with the same area as of the previous circular subapertures, distributed along the boundary of the full disc-shaped aperture. Another change in the current system is the use of coded phase mask with a point response of a sparse dot pattern. The third change is in the reconstruction process in which a nonlinear correlation with optimal parameters is implemented. With the improved image quality, the modified-PAIS can save weight and cost of imaging devices in general and of space telescopes in particular. Experimental results with reflective objects show that the concept of coded aperture extends the limits of classical imaging.

scholarly journals First-of-a-kind muography for nuclear waste characterization

2018 ◽  
Vol 377 (2137) ◽  
pp. 20180048 ◽  
Author(s):  
David Mahon ◽  
Anthony Clarkson ◽  
Simon Gardner ◽  
David Ireland ◽  
Ramsey Jebali ◽  
...  
Keyword(s):  
Nuclear Waste ◽  
Imaging System ◽  
Academic Research ◽  
Cosmic Ray ◽  
Laboratory Facility ◽  
Waste Container ◽  
High Resolution Images ◽  
And Performance ◽  
The Uk ◽  
The University

In the last decade, there has been a surge in the number of academic research groups and commercial companies exploiting naturally occurring cosmic-ray muons for imaging purposes in a range of industrial and geological applications. Since 2009, researchers at the University of Glasgow and the UK National Nuclear Laboratory (NNL) have pioneered this technique for the characterization of shielded nuclear waste containers with significant investment from the UK Nuclear Decommissioning Authority and Sellafield Ltd. Lynkeos Technology Ltd. was formed in 2016 to commercialize the Muon Imaging System (MIS) technology that resulted from this industry-funded academic research. The design, construction and performance of the Lynkeos MIS is presented along with first experimental and commercial results. The high-resolution images include the identification of small fragments of uranium within a surrogate 500-litre intermediate level waste container and metal inclusions within thermally treated GeoMelt® R&D Product Samples. The latter of these are from Lynkeos' first commercial contract with the UK National Nuclear Laboratory. The Lynkeos MIS will be deployed at the NNL Central Laboratory facility on the Sellafield site in Summer 2018 where it will embark upon a series of industry trials. This article is part of the Theo Murphy meeting issue ‘Cosmic-ray muography’.

Sign in / Sign up

Export Citation Format

Share Document