scholarly journals Radiological Evaluation of Penetration of the Irrigant according to Three Endodontic Irrigation Techniques

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Said Dhaimy ◽  
Sara Imdary ◽  
Sara Dhoum ◽  
Imane Benkiran ◽  
Amal El Ouazzani
Keyword(s):  
Experimental Study ◽  
Stainless Steel ◽  
Penetration Depth ◽  
Sodium Hypochlorite ◽  
Radiological Evaluation ◽  
Canal System ◽  
Significant Difference ◽  
Endodontic Irrigation

Introduction. This experimental study is to compare radiographs based on the penetration depth of the irrigant following three final irrigation techniques.Material and Method. A sample of sixty teeth with single roots were prepared with stainless steel K files followed by mechanized Ni-Ti files iRace® under irrigation with 2.5% sodium hypochlorite. Radiopaque solution was utilized to measure the penetration depth of the irrigant. Three irrigation techniques were performed during this study: (i) passive irrigation, (ii) manually activated irrigation, and (iii) passive irrigation with an endodontic needle CANAL CLEAN®. Radiographs were performed to measure the length of irrigant penetration in each technique.Results. In comparison, passive irrigation with a conventional syringe showed infiltration of the irrigant by an average of0.682±0.105, whereas the manually activated irrigation technique indicated an average of0.876±0.066infiltration. Irrigation with an endodontic syringe showed an average infiltration of0.910±0.043. The results revealed highly significant difference between the three irrigation techniques (α=5%).Conclusion. Adding manual activation to the irrigant improved the result by 20%. This study indicates that passive irrigation with an endodontic needle has proved to be the most effective irrigation technique of the canal system.

scholarly journals Evaluation of Apical Vapor Lock Formation and comparative Evaluation of its Elimination using Three different Techniques: An in vitro Study

2017 ◽  
Vol 18 (9) ◽  
pp. 790-794 ◽  
Author(s):  
Anand Agarwal ◽  
Zinnie Nanda ◽  
Rahul B Deore ◽  
Kavitarani Rudagi ◽  
Mirza Osman Baig ◽  
...  
Keyword(s):  
Sodium Hypochlorite ◽  
Root Canal ◽  
Comparative Evaluation ◽  
In Vitro Study ◽  
Apical Region ◽  
Group I ◽  
Working Length ◽  
Significant Difference ◽  
Endodontic Irrigation

ABSTRACT Aim The aim of this study was (i) to evaluate the formation of air bubbles in the apical region of root canal (apical vapor lock) during syringe irrigation, using cone beam computed tomography (CBCT) and (ii) comparative evaluation of the elimination of an established vapor lock by EndoActivator, ultrasonics, and manual dynamic agitation (MDA), using CBCT. Materials and methods A total of 60 extracted human singlerooted teeth were equally divided into three groups of 20 teeth each. The samples were decoronated 17 mm from the apex, cleaned, and shaped to size F4 Protaper using 3% sodium hypochlorite. Samples were irrigated with 3% sodium hypochlorite + cesium chloride radiopaque dye, and preoperative CBCT images were obtained. After formation of apical vapor lock in the scanned teeth, EndoActivator (group I), passive ultrasonic irrigation (group II), and MDA with K-file (group III) were performed and the teeth were again placed in CBCT scanner and results analyzed using the chi-square test. Results The apical vapor lock was formed in all the samples. Out of the 20 teeth in each group, the apical vapor lock was eliminated in 18 samples of EndoActivator group (90%), 16 samples of ultrasonic group (80%), while it was eliminated in 10 samples by MDA (50%). Conclusion It is concluded that (1) apical vapor lock is consistently formed during endodontic irrigation in closed canal systems and (2) sonic activation performs better than the ultrasonics and MDA in eliminating the apical vapor lock, with statistically significant difference between all the three groups (p < 0.05). Clinical significance The results suggest that the apical vapor lock (dead water zone) is consistently formed during endodontic irrigation which impedes irrigant penetration till the working length, thereby leading to inefficient debridement. Hence, to eliminate this vapor lock, techniques, such as sonics or ultrasonics should be used along with the irrigant after shaping and cleaning of the root canal. How to cite this article Agarwal A, Deore RB, Rudagi K, Nanda Z, Baig MO, Fareez MA. Evaluation of Apical Vapor Lock Formation and comparative Evaluation of its Elimination using Three different Techniques: An in vitro Study. J Contemp Dent Pract 2017;18(9):790-794.

scholarly journals Comparative Evaluation of the Efficacy of Chlorhexidine, Sodium Hypochlorite, the Diode Laser and Saline in Reducing the Microbial Count in Primary Teeth Root Canals – An In Vivo Study

2019 ◽  
Vol 10 (4) ◽  
pp. 268-274 ◽  
Author(s):  
Vidhi Walia ◽  
Mousumi Goswami ◽  
Shivesh Mishra ◽  
Nidhi Walia ◽  
Divya Sahay
Keyword(s):  
Laser Irradiation ◽  
Diode Laser ◽  
Sodium Hypochlorite ◽  
Root Canal ◽  
Primary Teeth ◽  
Canal System ◽  
Root Canals ◽  
Group 4 ◽  
Significant Difference ◽  
Root Canal System

Introduction: One of the primary goals of pulpectomy is to decrease the sum total of microorganisms and disinfect the tooth root canal system. To achieve this, mechanical preparation, irrigation, disinfection and obturation of the root canal is necessary. The present study was set out to evaluate the difference in the antibacterial efficacy of primary teeth root canals either irrigated with chlorhexidine, saline, and sodium hypochlorite or irradiated with a soft tissue diode laser (980 nm, Photon Plus, Zolar Tech & Mfg Co. Inc, Ontario, Canada). Methods: Sixty primary teeth of children requiring pulpectomy were divided into 4 groups of 15 each, group 1 (2% chlorhexidine), group 2 (1% sodium hypochlorite), group 3 (laser irradiation) and group 4 (saline). Pulp tissue was extirpated from the canals and the samples were collected using sterile absorbent paper points. After cleaning and shaping, the root canals of the teeth in each group were irrigated using sodium hypochlorite, chlorhexidine, and saline or were irradiated with the laser. The samples were obtained again and sent for microbiological examination. Results: The colony-forming unit (CFU) counts from pre-disinfection sample served as a baseline for comparisons throughout the study. The mean bacterial colony counts of all the isolated bacteria reduced after irrigation or irradiation. Intergroup comparisons showed no significant difference when groups 1, 2, and 3 were compared to each other (P>0.05). However, a significant difference was seen when groups 1, 2, 3 were compared to group 4 (P<0.05). Conclusion: Two percent chlorhexidine, 1% sodium hypochlorite and laser irradiation succeeded in reducing the root canal infection. Hence, diode laser irradiation may be a possible supplement to existing protocols for disinfecting the root canal system.

Comparative Study to Evaluate the Surface Detail Reproduction of Dental Stone after Immersion in Various Different Disinfectant Solutions, Under Stereomicroscope 10 X Magnification –An In-Vitro Study

2017 ◽  
Vol 9 (3) ◽  
Author(s):  
Rathika Rai ◽  
M. A. Easwaran ◽  
K. T. Dhivya
Keyword(s):  
Sodium Hypochlorite ◽  
In Vitro Study ◽  
Control Group ◽  
Immersion Method ◽  
Significant Difference ◽  
Surface Irregularities ◽  
Disinfectant Solution ◽  
Surface Detail ◽  
Group B

Aim: To evaluate the surface detail reproduction of dental stone this is immersed in different disinfectant solution and studied under stereomicroscope. Methodology: Total number of 30 specimens of dental stone (Type III) were made with measurements of 1.5cm diameter and 1cm height .This samples are divided in to 3 groups group A,B,C. were A is immersed in Distilled water which was taken as control group ;B is immersed in 2% Glutaraldehyde and C is immersed in 5%sodium hypochlorite. Each specimen were immersed in the disinfectant solution for 15 minutes and dried under room temperature for 24 hrs. After 24 hrs each specimens are studied under stereomicroscope for surface details. Result: The results showed no significant difference in the surface irregularities and porosities for a group 1 and group 2 except group 3 which showed significant increase in the porosities, surface irregularities and erosions after disinfection with 5% NaHOCl by immersion method. Conclusion: The surface detail reproduction capacity of die stone was adversely affected when 5% Sodium hypochlorite was used as disinfectant solution when compare d to control group and 2% Glutaraldehyde

scholarly journals Comparative Evaluation of Fracture Resistance of Endodontically Treated Teeth Restored with Resin Fiber Post and Stainless Steel Post: An In Vitro Study

2015 ◽  
Vol 03 (02) ◽  
pp. 080-084
Author(s):  
Vijay Singh ◽  
Poonam Bogra ◽  
Saurabh Gupta ◽  
Navneet Kukreja ◽  
Neha Gupta
Keyword(s):  
Stainless Steel ◽  
Fracture Resistance ◽  
Testing Machine ◽  
Compressive Force ◽  
Control Group ◽  
Fiber Post ◽  
Endodontically Treated Teeth ◽  
Group I ◽  
Significant Difference

AbstractFracture resistance of endodontically treated teeth restored with post. Aims: This study aims to compare the fracture resistance of endodontically treated teeth restored with resin fiber and stainless steel post. Commercially available prefabricated resin fiber post(Dentsply Maillefer Easy Post), prefabricated stainless steel post(Coltene/Whaledent Parapost) were used. Methods and Material: Forty five maxillary central incisors were obturated and divided into 3 groups: Control Group (Group I) without any post (n = 15), Resin Fiber Post Group (Group II) (n = 15) and Stainless Steel Post Group (Group III) (n = 15). In all Groups except control group, post space was prepared; a post was cemented, and a core build-up was provided. All the specimens were subjected to compressive force under a universal testing machine until fracture. Statistical analysis used: The results were analyzed using the variable analysis test (ANOVA). Results: One-way analysis of variance revealed significant difference among test groups. The control group demonstrated highest fracture resistance (925.2183 N), followed by the resin fiber post group (486.7265 N) and stainless steel post group (423.539N). Conclusions: Teeth restored with resin fiber post showed higher fracture resistance values than prefabricated stainless steel post.

Effectiveness of Virtual Resilience Training on Assertiveness in Student Girls Aged 9–10 Years: A 1-Month Follow-Up

2021 ◽  
pp. 105984052110135
Author(s):  
Shima Gadari ◽  
Jamile Farokhzadian ◽  
Parvin Mangolian Shahrbabaki
Keyword(s):  
Experimental Study ◽  
Internal Stress ◽  
Intervention Group ◽  
The Other ◽  
Hormonal Changes ◽  
Emotional Instability ◽  
Other Hand ◽  
Significant Difference ◽  
Resilience Training

Girls between the ages of 9 and 10 begin to experience physical, physiological, and hormonal changes that may lead to internal stress. At this age, children are struggling for autonomy; on the other hand, they may experience emotional instability, and for these reasons, they may be vulnerable in many ways. This experimental study aimed to investigate the effect of resilience training on assertiveness in student girls aged 9–10. Data were collected before, immediately after, and 1 month after the intervention in the control ( n = 40) and intervention ( n = 37) groups. There was a significant difference between the assertiveness of the intervention immediately (26.80 ± 3.73) and 1 month after the intervention (27.05 ± 3.73), and assertiveness significantly increased in the intervention group ( p = .0001). Resilience training leads to improvements in assertiveness in student girls aged 9–10.

scholarly journals Influence of Activated Fluxes on the Bead Shape of A-TIG Welds on Carbon and Low-Alloy Steels in Comparison with Stainless Steel AISI 304L

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 530
Author(s):  
Jerzy Niagaj
Keyword(s):  
Stainless Steel ◽  
Penetration Depth ◽  
High Strength ◽  
Tig Welding ◽  
Low Alloy Steels ◽  
Aisi 304L ◽  
A Tig Welding ◽  
Alloy Steels ◽  
Steel Aisi ◽  
Stainless Steel Aisi

The article presents results of comparative A-TIG welding tests involving selected unalloyed and fine-grained steels, as well as high-strength steel WELDOX 1300 and austenitic stainless steel AISI 304L. The tests involved the use of single ingredient activated fluxes (Cr2O3, TiO2, SiO2, Fe2O3, NaF, and AlF3). In cases of carbon and low-alloy steels, the tests revealed that the greatest increase in penetration depth was observed in the steels which had been well deoxidized and purified during their production in steelworks. The tests revealed that among the activated fluxes, the TiO2 and SiO2 oxides always led to an increase in penetration depth during A-TIG welding, regardless of the type and grade of steel. The degree of the aforesaid increase was restricted within the range of 30% to more than 200%.

scholarly journals Outcomes of Endodontic Therapy Comparing Conventional Sodium Hypochlorite Irrigation with Passive Ultrasonic Irrigation Using Sodium Hypochlorite and Ethylenediaminetetraacetate. A Retrospective Analysis

2016 ◽  
Vol 10 (1) ◽  
pp. 375-381 ◽  
Author(s):  
Moritz Hertel ◽  
Katja Sommer ◽  
Eckehard Kostka ◽  
Sandra Maria Imiolczyk ◽  
Husam Ballout ◽  
...  
Keyword(s):  
Sodium Hypochlorite ◽  
Clinical Symptoms ◽  
Treatment Success ◽  
Success Rates ◽  
Chi Square ◽  
Passive Ultrasonic Irrigation ◽  
Ultrasonic Irrigation ◽  
Endodontic Irrigation ◽  
Group 2

The aim of the present study was to investigate the clinical outcomes of two different standardized endodontic irrigation protocols. It was assumed that the additional use of ethylenediaminetetraacetate (EDTA) and passive ultrasonic irrigation (PUI) would result in an increased rate of absence of symptoms and remission based on the periapical index (PAI) compared to passive irrigation using only sodium hypochlorite (NaOCl). Data and radiographs from 199 teeth retrieved from the institutional endodontic database were analyzed retrospectively. In 106 teeth irrigation was performed using only NaOCl (protocol 1). Ninety-three teeth were irrigated using NaOCl and EDTA (protocol 2). Chlorhexidine (CHX) was additionally used in revision treatments in both groups. All irrigants in group 2 were activated by PUI. Mean follow-up periods were: protocol 1 = 9.2 ± 4.4 and protocol 2 = 6.6 ± 2.5 months (p < 0.0001 (chi-square test). The frequencies of the PAImasterpoint and PAIfollow-up scores did not differ significantly between teeth, which received either protocol 1 or 2 (p = 0.555 and 0.138). Statistical analysis revealed no significant association between treatment success (absence of clinical symptoms and PAIfollow-up = I or PAImasterpoint > PAIfollow-up > I) and the applied protocol (success rates: protocol 1 = 72.6% vs. protocol 2 = 82.8%; p = 0.203). Furthermore, the frequency of extractions did not differ significantly between the two protocols (p = 0.102). No association was found between follow-up time and treatment success (p = 0.888). The hypothesis was not confirmed. Even though the obtained success rate was higher after supplementing the irrigation protocol with EDTA and PUI, no significance was recorded. Hence, protocol 2 was not superior to protocol 1 regarding therapy success, at least within the limited follow-up period. It may be cautiously concluded that sufficient mechanical debridement combined with passive NaOCl irrigation results in comparably high success rates compared to EDTA and PUI.

Sign in / Sign up

Export Citation Format

Share Document