scholarly journals Equilibrium, Kinetic, and Thermodynamic Studies on the Adsorption of Cadmium from Aqueous Solution by Modified Biomass Ash

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Lei Xu ◽  
Xuebo Zheng ◽  
Hongbiao Cui ◽  
Zhenqiu Zhu ◽  
Jiani Liang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Metal Concentration ◽  
Morphological Properties ◽  
Maximum Adsorption Capacity ◽  
Icp Oes ◽  
Biomass Ash ◽  
Bet Analysis ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Studies

Natural biomass ash of agricultural residuals was collected from a power plant and modified with hexagonal mesoporous silica and functionalized with 3-aminopropyltriethoxysilane. The physicochemical and morphological properties of the biomass ash were analyzed by ICP-OES, SEM, TEM-EDS, FTIR, and BET analysis. The adsorption behavior of the modified product for Cd2+ in aqueous solution was studied as a function of pH, initial metal concentration, equilibrium time, and temperature. Results showed that the specific surface area of the modified product was 9 times that of the natural biomass ash. The modified biomass ash exhibited high affinity for Cd2+ and its adsorption capacity increased sharply with increasing pH from 4.0 to 6.0. The maximum adsorption capacity was 23.95 mg/g in a pH 5 solution with an initial metal concentration of 50 mg/L and a contact time of 90 min. The adsorption of Cd2+ onto the modified biomass ash was well fitted to the Langmuir model and it followed pseudo-second-order kinetics. Thermodynamic analysis results showed that the adsorption of Cd2+ was spontaneous and endothermic in nature. The results suggest that the modified biomass ash is promising for use as an inexpensive and effective adsorbent for Cd2+ removal from aqueous solution.

scholarly journals Biochar of Spent Coffee Grounds as Per Se and Impregnated with TiO2: Promising Waste-Derived Adsorbents for Balofloxacin

Molecules ◽  
2021 ◽  
Vol 26 (8) ◽  
pp. 2295
Author(s):  
Marwa El-Azazy ◽  
Ahmed S. El-Shafie ◽  
Hagar Morsy
Keyword(s):  
Adsorption Capacity ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Spent Coffee Grounds ◽  
Thermal Stabilities ◽  
Coffee Grounds ◽  
Bet Analysis ◽  
Pseudo Second Order ◽  
Set Up ◽  
Adsorption Desorption

Biochars (BC) of spent coffee grounds, both pristine (SCBC) and impregnated with titanium oxide (TiO2@SCBC) were exploited as environmentally friendly and economical sorbents for the fluroquinolone antibiotic balofloxacin (BALX). Surface morphology, functional moieties, and thermal stabilities of both adsorbents were scrutinized using SEM, EDS, TEM, BET, FTIR, Raman, and TG/dT analyses. BET analysis indicated that the impregnation with TiO2 has increased the surface area (50.54 m2/g) and decreased the pore size and volume. Batch adsorption experiments were completed in lights of the experimental set-up of Plackett-Burman design (PBD). Two responses were maximized; the % removal (%R) and the adsorption capacity (qe, mg/g) as a function of four variables: pH, adsorbent dosage (AD), BALX concentration ([BALX]), and contact time (CT). %R of 68.34% and 91.78% were accomplished using the pristine and TiO2@SCBC, respectively. Equilibrium isotherms indicated that Freundlich model was of a perfect fit for adsorption of BALX onto both adsorbents. Maximum adsorption capacity (qmax) of 142.55 mg/g for SCBC and 196.73 mg/g for the TiO2@SCBC. Kinetics of the adsorption process were best demonstrated using the pseudo-second order (PSO) model. The adsorption-desorption studies showed that both adsorbents could be restored with the adsorption efficiency being conserved up to 66.32% after the fifth cycles.

Study on Adsorption of Cu(II) on Chitosan Nanofiber Membranes

2014 ◽  
Vol 13 (05n06) ◽  
pp. 1460009 ◽  
Author(s):  
Jianhua Cao ◽  
Dongzhou Li ◽  
Weihua Liang ◽  
Dayong Wu
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Ph Effect ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Equilibrium Isotherms ◽  
Electrospinning Technique ◽  
Chitosan Nanofiber ◽  
Pseudo Second Order ◽  
Nanofiber Membranes

Chitosan nanofiber membranes by electrospinning technique were used to remove Cu ( II ) from aqueous solution. The adsorption kinetics, equilibrium isotherms, and pH effect were investigated in batch experiments. The Langmuir isotherm and pseudo second-order kinetic models agree well with the experimental data. The chitosan nanofiber membranes are effective for Cu ( II ) adsorption at pH6. Results showed that the maximum adsorption capacity of the chitosan nanofiber membranes with Cu ( II ) is 118.62 mg g-1. The chitosan nanofiber membranes can be used as an effective adsorbent for the removal of Cu ( II ) in aqueous solution due to high adsorption capacity.

Pyridinium-functionalized magnetic mesoporous silica nanoparticles as a reusable adsorbent for phosphate removal from aqueous solution

2016 ◽  
Vol 74 (5) ◽  
pp. 1127-1135 ◽  
Author(s):  
Fang Ma ◽  
Hongtao Du ◽  
Ronghua Li ◽  
Zengqiang Zhang
Keyword(s):  
Aqueous Solution ◽  
Silica Nanoparticles ◽  
Adsorption Capacity ◽  
Mesoporous Silica Nanoparticles ◽  
Phosphate Removal ◽  
Maximum Adsorption Capacity ◽  
Intra Particle Diffusion ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Magnetic Mesoporous Silica

In this work, pyridinium-functionalized silica nanoparticles adsorbent (PC/SiO2/Fe3O4) was synthesized for phosphate removal from aqueous solutions. The removal efficiency of phosphate on the PC/SiO2/Fe3O4 was carried out and investigated under various conditions such as pH, contact temperature and initial concentration. The results showed that the adsorption equilibrium could be reached within 10 min, which fitted a Langmuir isotherm model, with maximum adsorption capacity of 94.16 mg/g, and the kinetic data were fitted well by pseudo-second-order and intra-particle diffusion models. Phosphate loaded on the adsorbents could be easily desorbed with 0.2 mol/L of NaOH, and the adsorbents showed good reusability. The adsorption capacity was still around 50 mg/g after 10 times of reuse. All the results demonstrated that this pyridinium-functionalized mesoporous material could be used for the phosphate removal from aqueous solution and it was easy to collect due to its magnetic properties.

scholarly journals Adsorption of Cadmium Ions from an Aqueous Solution on a Highly Stable Dopamine-Modified Magnetic Nano-Adsorbent

2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Ting Lei ◽  
Sheng-Jian Li ◽  
Fang Jiang ◽  
Zi-Xuan Ren ◽  
Li-Lian Wang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Magnetic Nanomaterials ◽  
Maximum Adsorption Capacity ◽  
Cadmium Ions ◽  
Effective Removal ◽  
Dopamine Hydrochloride ◽  
Pseudo Second Order ◽  
Adsorption Desorption ◽  
Nano Adsorbent

Abstract Magnetic nanomaterials were functionalized with dopamine hydrochloride as the functional reagent to afford a core–shell-type Fe3O4 modified with polydopamine (Fe3O4@PDA) composite, which was used for the adsorption of cadmium ions from an aqueous solution. In addition, the effects of environmental factors on the adsorption capacity were investigated. Furthermore, the adsorption kinetics, isotherm, and thermodynamics of the adsorbents were discussed. Results revealed that the adsorption of cadmium by Fe3O4@PDA reaches equilibrium within 120 min, and kinetic fitting data are consistent with the pseudo-second-order kinetics (R2 > 0.999). The adsorption isotherm of Cd2+ on Fe3O4@PDA was in agreement with the Freundlich model, with the maximum adsorption capacity of 21.58 mg/g. The thermodynamic parameters revealed that adsorption is inherently endothermic and spontaneous. Results obtained from the adsorption–desorption cycles revealed that Fe3O4@PDA exhibits ultra-high adsorption stability and reusability. Furthermore, the adsorbents were easily separated from water under an enhanced external magnetic field after adsorption due to the introduction of an iron-based core. Hence, this study demonstrates a promising magnetic nano-adsorbent for the effective removal of cadmium from cadmium-containing wastewater. Graphical Abstract

scholarly journals Adsorption of Cu2+ to biomass ash and its modified product

2018 ◽  
Vol 2017 (1) ◽  
pp. 115-125 ◽  
Author(s):  
Lei Xu ◽  
Hongbiao Cui ◽  
Xuebo Zheng ◽  
Jiani Liang ◽  
Xiangyu Xing ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Power Plants ◽  
Copper Ions ◽  
Adsorption Property ◽  
Morphological Properties ◽  
Toxic Heavy Metals ◽  
Biomass Ash ◽  
Adsorption Characteristics ◽  
Pseudo Second Order ◽  
Biomass Power Plants

Abstract Ash produced by biomass power plants has great potential for the removal of heavy metal ions from aqueous solution. The pollution of toxic heavy metals to water is a worldwide environmental problem. Discharges containing copper, in particular, are strictly controlled because the excessive copper can cause serious harm to the environment and human health. This work aims to investigate the adsorption characteristics of copper ions in aqueous solution by biomass ash and the modified products, and to evaluate their potential application in water pollution control. The biomass ash was modified with a mesoporous siliceous material and functionalized with 3-aminopropyltriethoxysilane. The surface properties of the biomass ash and the new matrix were studied to evaluate their adsorption property for Cu2+ ions at different pHs, initial metal concentrations and the thermodynamic and kinetic were studied. The chemical and morphological properties of this modified material are analyzed; the specific surface area of the modified biomass ash was nine times that of the initial ash. Both of the two materials showed a strong affinity for Cu2+, and the Langmuir model could best represent the adsorption characteristics of Cu2+ on the two kinds of materials. The adsorption capacity of copper on the material increased with the increase of pH and pH 6 was the optimum pH. Thermodynamic analysis results showed that the adsorption of Cu2+ was spontaneous and endothermic in nature. The adsorptions of Cu2+ onto the modified biomass ash followed pseudo-second-order kinetics.

scholarly journals Watermelon rinds as cost-efficient adsorbent for acridine orange: a response surface methodological approach

2021 ◽  
Author(s):  
Ahmed S. El-Shafie ◽  
Siham S. Hassan ◽  
Nuri Akther ◽  
Marwa El-Azazy
Keyword(s):  
Acridine Orange ◽  
Adsorption Capacity ◽  
Methodological Approach ◽  
Maximum Adsorption Capacity ◽  
Adsorption Efficiency ◽  
Bet Analysis ◽  
Desorption Study ◽  
Pseudo Second Order ◽  
Cost Efficient ◽  
Efficient Adsorbent

AbstractIn the current investigation, watermelon rinds (WMR) have been utilized as an eco-friendly and cost-efficient adsorbent for acridine orange (AO) from contaminated water samples. Adsorption of AO onto raw (RWM) and thermally treated rinds (TTWM250 and TTWM500) has been studied. The adsorption efficiency of the three adsorbents was evaluated by measuring the % removal (%R) of AO and the adsorption capacity (qe, mg/g). Dependent variables (%R and qe) were optimized as a function of four factors: pH, sorbent dosage (AD), the concentration of AO (DC), and contact time (ST). Box–Behnken (BB) design has been utilized to obtain the optimum adsorption conditions. Prepared adsorbents have been characterized using scanning electron microscopy (SEM), Fourier-transform infrared (FT-IR), and Raman spectroscopies. The surface area of RWM, TTWM250, and TTWM500, as per the Brunauer-Emmett-Teller (BET) analysis, was 2.66, 2.93, and 5.03 m2/g, respectively. Equilibrium investigations suggest that Freundlich model was perfectly fit for adsorption of AO onto TTWM500. Maximum adsorption capacity (qmax) of 69.44 mg/g was obtained using the Langmuir equation. Adsorption kinetics could be best described by the pseudo-second-order (PSO) model. The multi-cycle sorption-desorption study showed that TTWM500 could be regenerated with the adsorption efficiency being preserved up to 87% after six cycles.

Magnetic nanopowder as effective adsorbent for the removal of Congo Red from aqueous solution

2013 ◽  
Vol 69 (6) ◽  
pp. 1234-1240 ◽  
Author(s):  
O. Paşka ◽  
R. Ianoş ◽  
C. Păcurariu ◽  
A. Brădeanu
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Congo Red ◽  
Polluted Water ◽  
Maximum Adsorption Capacity ◽  
Anionic Dyes ◽  
Solution Ph ◽  
Efficient Combustion ◽  
Equilibrium Data ◽  
Pseudo Second Order

A magnetic iron oxide nanopowder (MnP), prepared by a simple and efficient combustion synthesis technique, was tested for the removal of the anionic dye Congo Red (CR) from aqueous solution. The influence of solution pH, adsorbent dose, temperature, contact time and initial dye concentration on the adsorption of CR onto MnP were investigated. It was shown that the CR adsorption was pH dependent and the adsorption mechanism was governed by electrostatic forces. The adsorption kinetic was best described by the pseudo-second-order model and the equilibrium data were well fitted to the Langmuir isotherm, yielding maximum adsorption capacity of 54.46 mg g−1. The undeniable advantages of the MnP adsorbent such as inexpensive preparation method, good adsorption capacity and easy separation using an external magnetic field, recommend it as a promising candidate for the removal of anionic dyes from polluted water.

Adsorption of Cu 2+ Ions from Aqueous Solution by NaOH Activated ZSM-5 Zeolite

2012 ◽  
Vol 482-484 ◽  
pp. 2568-2572
Author(s):  
Xu Zhuo Sun ◽  
Dong Jin Wan ◽  
Bo Li ◽  
Li Li Wang ◽  
Ning Wang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Langmuir Model ◽  
Maximum Adsorption Capacity ◽  
Kinetics Study ◽  
Adsorption Efficiency ◽  
Equilibrium Isotherm ◽  
Naoh Solution ◽  
Pseudo Second Order

ZSM-5 zeolite was chemical activated by using NaOH solution to enhance the adsorption efficiency to Cu2+ in aqueous solution. The equilibrium isotherm of NaOH activated ZSM-5 zeolite showed that the Langmuir model gave a better fit to the experimental data. The maximum adsorption capacity of NaOH activated ZSM-5 zeolite was 40.49 mg/g. The adsorption capacity was increased nearly 3.3 times than unactivated zeolite by using 0.4M NaOH. The kinetics study showed that the pseudo-second-order kinetics model could be used to describe the adsorption process satisfactorily. The research also found that the coexisting of Pb2+ ion would greatly decrease the adsorption efficiency of activated zeolite from 99.35% decreased to 56.52%. Both ZSM-5 zeolite and NaOH activated ZSM-5 zeolite was characterized by SEM.

Adsorption of Phosphate onto Slag from Aqueous Solution

2012 ◽  
Vol 550-553 ◽  
pp. 2255-2258
Author(s):  
Bing Bing Liu ◽  
Hua Yong Zhang ◽  
Lu Yi Zhang
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
Langmuir Model ◽  
Phosphate Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
High Adsorption ◽  
Pseudo Second Order

Phosphate adsorption from aqueous solution using slag was investigated as the function of pH, contact time and adsorbent dosage. The results showed that the optimum value of pH was 2. Both Langmuir isotherm and Freundlich isotherm model were fit to describe the phosphate adsorption, and the maximum adsorption capacity from Langmuir model calculated was 9.09 mg/L. The adsorption process on slag followed pseudo second-order kinetic. Due to the relatively high adsorption capacity, the slag has the potential for application to removal phosphate from wastewater.

scholarly journals RGO/CNF/PANI AS AN EFFECTIVE ADSORBENT FOR THE ADSORPTION OF URANIUM FROM AQUEOUS SOLUTION

2018 ◽  
Vol 56 (1A) ◽  
pp. 25
Author(s):  
Nguyen Quang Dat
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Uranium Concentration ◽  
Maximum Adsorption Capacity ◽  
High Adsorption ◽  
Order Model ◽  
Pani Composite ◽  
Reduced Graphene ◽  
Pseudo Second Order

In this paper, we present a recent study in the adsorption of uranium from an aquatic environment by reduced graphene oxide - Cu0.5Ni0.5Fe2O4 ferrite – polyaniline (RGO/CNF/PANI) composite. Uranium concentration was carried out by batch techniques. The effect of pH, contact time, concentration of equilibrium state and reusability on uranium adsorption capacity have been studied. The adsorption process was accomplished within 240 min and could be well described by the pseudo-second-order model. The adsorption isotherm agrees well with the Langmuir model, having a maximum adsorption capacity of 2000 mg/g, at pH = 5 and 25 oC. The RGO/CNF/PANI materials could be a promising absorbent for removing U (VI) in aqueous solution because of their high adsorption capacity and convenient magnetic separation. 

Sign in / Sign up

Export Citation Format

Share Document