scholarly journals Calculation of Tangent Modulus of Soils under Different Stress Paths

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Hua Huang ◽  
Min Huang ◽  
Jiangshu Ding
Keyword(s):  
Triaxial Compression ◽  
Confining Pressure ◽  
Tangent Modulus ◽  
Engineering Practice ◽  
Silty Clay ◽  
Stress Strain ◽  
Foundation Pit ◽  
Calculation Results ◽  
Chang Model ◽  
Initial Tangent Modulus

During excavation of foundation pit, soils of different sites may undergo different unloading paths. This study focuses on the tangent modulus of soil under different stress paths and provides theoretical basis for the deformation calculation of soil. In this paper, conventional triaxial compression test and K0 consolidation unloading test were conducted with mucky soil and silty clay to obtain the deformation characteristics of soils under different stress paths. Experiment results show that the soil samples exhibit distinct stress-strain characteristics under different stress paths, but they all show nonlinearity. The initial tangent modulus increases as the consolidation confining pressure intensifies. Then, based on the test data, the power function relationship between initial tangent modulus and confining pressure under unloading was verified. Simultaneously, a hyperbola function to express stress-strain relation of soils under the K0 consolidation unloading condition was proposed and proved. Finally, the formulas of the tangent modulus under K0 consolidation unloading were established referring to the derivation of that in Duncan–Chang model. The theoretical calculation results agree well with the test results. It can expand the use of the Duncan–Chang model and improve its application to engineering practice.

scholarly journals The Application of Improved Duncan-Chang Model in Unloading Soil

2014 ◽  
Vol 8 (1) ◽  
pp. 410-415 ◽  
Author(s):  
Yi He ◽  
Xuejun Chen
Keyword(s):  
Triaxial Test ◽  
Stress Path ◽  
Model Parameters ◽  
Silty Clay ◽  
True Triaxial Test ◽  
Stress Strain ◽  
Foundation Pit ◽  
Foundation Soil ◽  
Strain Relationship ◽  
Chang Model

On the basis of the representative samples of silty clay found in Wuhan, China, the lateral unloading of soil’s stress path produced by excavating foundation pit engineering, was simulated by triaxial experiment. A series of consolidated- drained true triaxial test and normal triaxial test were conducted. According to the results of tests, the parameter of the Duncan-Chang Model was determined. A modulus formula was used for the foundation soil in the lateral unloading stress path tests to replace the modulus formula of Duncan-Chang Model based on the σ3 =const . Moreover, the Duncan- Chang hyperbola nonlinear elastic constitutive model was used to simulate the plane strain test. A method to improve the ability of Duncan-Chang model in order to take into account the effects of the intermediate principal stress on the strength and deformation was presented as well as all the model parameters were also determined. The adaptability of the model for unloading the stress path was verified by comparing the theoretical stress-strain relationship and empirical stress-strain relationship.

Study on Constitutive Mode of Three Typical Rocks Based on Triaxial Compression Test

2012 ◽  
Vol 170-173 ◽  
pp. 322-326
Author(s):  
Kui Chen ◽  
Ren Hua Yang ◽  
Tao Xu ◽  
Ya Jing Qi
Keyword(s):  
Residual Strength ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Digital Design ◽  
Peak Strength ◽  
Design Parameters ◽  
Stress Strain ◽  
Red Sandstone ◽  
Constitutive Mode ◽  
Shield Machine

In order to study the relationship between the design parameters of the shield machine and the strength of rock, the behaviours of rocks under the conventional triaxial compression, the complete stress-strain curves under different confining pressures of three typical rocks, i.e. granite, limestone and red sandstone, were taken out for analysis. From the curves, the values of elastic modulus E and Poisson's ratio μ were gained and the relationships between the following parameters were figured out, which are peak strength versus confining pressure, residual strength versus confining pressure, strain at peak strength versus confining pressure, and strain at residual strength versus confining pressure. According to the values and relationships, the complete stress-strain curves were divided into three parts. For each part, a constitutive equation was established by using the strain softening trilinear elastic-brittle-plastic constitutive model, and all the related parameters in the constitutive equations were also presented, which provide a theoretical foundation for the digital design of the cutter head and cutters of Shield machine.

Research on Hydraulic Conductivity of Coarse Sandstone under Triaxial Compression

2011 ◽  
Vol 94-96 ◽  
pp. 1146-1151 ◽  
Author(s):  
Guan Rong ◽  
Xiao Jiang Wang
Keyword(s):  
Hydraulic Conductivity ◽  
Circumferential Strain ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Test Results ◽  
Stress Strain ◽  
Deformation And Failure ◽  
Maximum Value ◽  
Strain Process ◽  
Peak Value

Permeability test for complete stress-strain process of coarse sandstone were carried out in triaxial test instrument. On the basis of test results, the influence of confining pressure and strain on the hydraulic conductivity was discussed. It is shown that in the complete stress-strain process, hydraulic conductivity changes in the law that presents the same character with the curve of stress-strain. The hydraulic conductivity reduces slightly with the increase of deviatoric stress in the stage of micro fracture compressing and elastic; In the elastoplastic stage, along with the expansion of new fractures, the hydraulic conductivity increases slowly at first and then reaches sharply to the maximum value after peak point; In the post-peak stage, the fracture which controls the hydraulic conductivity of coarse sandstone is compressed because of the confining pressure and the hydraulic conductivity decreases. During the process of deformation and failure, the hydraulic conductivity is more sensitive to the change of circumferential strain. With the increase of confining pressure, the increased value from initial to peak value and the decreased value from peak to residual value decreases.

scholarly journals Failure Criteria and Constitutive Relationship of Lightweight Aggregate Concrete under Triaxial Compression

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 507
Author(s):  
Peihuan Ye ◽  
Yuliang Chen ◽  
Zongping Chen ◽  
Jinjun Xu ◽  
Huiqin Wu
Keyword(s):  
Triaxial Compression ◽  
Lightweight Aggregate ◽  
Confining Pressure ◽  
Failure Criteria ◽  
Constitutive Relationship ◽  
Lightweight Aggregate Concrete ◽  
Stress Strain ◽  
Aggregate Concrete ◽  
Stress Theory ◽  
Relationship Of

This paper investigates the compression behavior and failure criteria of lightweight aggregate concrete (LAC) under triaxial loading. A total of 156 specimens were tested for three parameters: concrete strength, lateral confining pressure and aggregate immersion time, and their effects on the failure mode of LAC and the triaxial stress-strain relationship of LAC is studied. The research indicated that, as the lateral constraint of the specimen increases, the failure patterns change from vertical splitting failure to oblique shearing failure and then to indistinct traces of damage. The stress-strain curve of LAC specimens has an obvious stress plateau, and the curve no longer appears downward when the confining pressure exceeds 12 MPa. According to the experimental phenomenon and test data, the failure criterion was examined on the Mohr–Coulomb theory, octahedral shear stress theory and Rendulic plane stress theory, which well reflects the behavior of LAC under triaxial compression. For the convenience of analysis and application, the stress-strain constitutive models of LAC under triaxial compression are recommended, and these models correlate well with the test results.

scholarly journals Triaxial Testing of Geosynthetics Reinforced Tailings with Different Reinforced Layers

Materials ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1943
Author(s):  
Fu Yi ◽  
Changbo Du
Keyword(s):  
Triaxial Compression ◽  
Friction Angle ◽  
Confining Pressure ◽  
Test Results ◽  
Compression Tests ◽  
Strength Index ◽  
Stress Strain ◽  
High Confining Pressure ◽  
Zhang Model ◽  
Triaxial Compression Tests

To evaluate the shear properties of geotextile-reinforced tailings, triaxial compression tests were performed on geogrids and geotextiles with zero, one, two, and four reinforced layers. The stress–strain characteristics and reinforcement effects of the reinforced tailings with different layers were analyzed. According to the test results, the geogrid stress–strain curves show hardening characteristics, whereas the geotextile stress–strain curves have strain-softening properties. With more reinforced layers, the hardening or softening characteristics become more prominent. We demonstrate that the stress–strain curves of geogrids and geotextile reinforced tailings under different reinforced layers can be fitted by the Duncan–Zhang model, which indicates that the pseudo-cohesion of shear strength index increases linearly whereas the friction angle remains primarily unchanged with the increase in reinforced layers. In addition, we observed that, although the strength of the reinforced tailings increases substantially, the reinforcement effect is more significant at a low confining pressure than at a high confining pressure. On the contrary, the triaxial specimen strength decreases with the increase in the number of reinforced layers. Our findings can provide valuable input toward the design and application of reinforced engineering.

Small-strain behavior of frozen sand in triaxial compression

1995 ◽  
Vol 32 (3) ◽  
pp. 428-451 ◽  
Author(s):  
Glen R. Andersen ◽  
Christopher W. Swan ◽  
Charles C. Ladd ◽  
John T. Germaine
Keyword(s):  
High Pressure ◽  
Strain Rate ◽  
Yield Stress ◽  
Axial Strain ◽  
Triaxial Compression ◽  
Strain Curve ◽  
Confining Pressure ◽  
Stress Strain ◽  
Strain Behavior ◽  
Frozen Sand

The stress–strain behavior of frozen Manchester fine sand has been measured in a high-pressure low-temperature triaxial compression testing system developed for this purpose. This system incorporates DC servomotor technology, lubricated end platens, and on-specimen axial strain devices. A parametric study has investigated the effects of changes in strain rate, confining pressure, sand density, and temperature on behavior for very small strains (0.001%) to very large (> 20%) axial strains. This paper presents constitutive behavior for strain levels up to 1%. On-specimen axial strain measurements enabled the identification of a distinct upper yield stress (knee on the stress–strain curve) and a study of the behavior in this region with a degree of precision not previously reported in the literature. The Young's modulus is independent of strain rate and temperature, increases slightly with sand density in a manner consistent with Counto's model for composite materials, and decreases slightly with confining pressure. In contrast, the upper yield stress is independent of sand density, slightly dependent on confining pressure (considered a second order effect), but is strongly dependent on strain rate and temperature in a fashion similar to that for polycrystalline ice. Key words : frozen sand, high-pressure triaxial compression, strain rate, temperature, modulus, yield stress.

scholarly journals Mechanical Properties of Fiber-Reinforced Soil under Triaxial Compression and Parameter Determination Based on the Duncan-Chang Model

2020 ◽  
Vol 10 (24) ◽  
pp. 9043
Author(s):  
Yingying Zhao ◽  
Xianzhang Ling ◽  
Weigong Gong ◽  
Peng Li ◽  
Guoyu Li ◽  
...  
Keyword(s):  
Fiber Length ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Reinforced Soil ◽  
Fiber Content ◽  
Fiber Reinforced ◽  
Strain Relationship ◽  
Relationship Of ◽  
Chang Model ◽  
Fiber Reinforced Soil

To study the mechanical properties of Y-shaped polypropylene fiber-reinforced subgrade fill, the strength characteristics of fiber-reinforced soil with different fiber contents, fiber lengths, and confining pressures were investigated through triaxial compression tests. The test results showed that fiber reinforcement significantly improved the strength and cohesion of the subgrade fill but had a limited impact on the internal friction angle. The fiber-reinforced soil specimens exhibited a failure pattern of bulging deformation, showing plastic failure characteristics. As the fiber content and length increased, the strength of the fiber-reinforced soil increased and then decreased. The optimal fiber content was 0.2%, and the optimal fiber length was between 12 and 18 mm in all test conditions. The strength of the fiber-reinforced soil increased with increasing confining pressure. An empirical model for predicting the failure strength of fiber-reinforced soil was established by analyzing the relationships between the failure strength of the fiber-reinforced soil and the fiber content, fiber length, and confining pressure. The stress-strain relationship of the fiber-reinforced soil exhibited strain-hardening characteristics and could be approximated by a hyperbolic curve. The Duncan-Chang model could be used to describe the stress-strain relationship of this fiber-reinforced soil. A calculation method to determine the model parameters (initial tangent modulus and ultimate deviator stress) was proposed.

scholarly journals Experimental Study on the Permeability of Weakly Cemented Rock under Different Stress States in Triaxial Compression Tests

Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Gangwei Fan ◽  
Mingwei Chen ◽  
Dongsheng Zhang ◽  
Zhen Wang ◽  
Shizhong Zhang ◽  
...  
Keyword(s):  
Underground Mining ◽  
Axial Strain ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Initial Permeability ◽  
Compression Tests ◽  
Mining Operations ◽  
Stress Strain ◽  
Loading And Unloading ◽  
Stress States

Mudstone and shaly coarse sandstone samples of Jurassic units in northwestern China were collected to study the seepage mechanism of weakly cemented rock affected by underground mining operations. Samples were studied using seepage experiments under triaxial compression considering two processes: complete stress-strain and postpeak loading and unloading. The results show that permeability variations closely correspond to deviatoric stress-axial strain during the process of complete stress-strain. The initial permeability is 7 times its minimum, contrasting with lesser differentials of initial, peak, and residual permeability. The magnitude of permeability ranges from 10−17 to 10−19 m2, representing a stable water-resisting property, and is 1 to 2 orders lower in mudstone than that in shaly coarse sandstone, indicating that the water-resisting property of the mudstone is much better than that of the shaly coarse sandstone. Permeability is negatively correlated with the confining pressure. In response to this pressure, the permeability change in mudstone is faster than that in shaly coarse sandstone during the process of postpeak loading and unloading. Weakly cemented rock has lower permeability according to the comparison with congeneric ordinary rocks. This distinction is more remarkable in terms of the initial permeability. Analyses based on scanning electron microscope (SEM) observations and mineral composition indicate that the samples are rich in clay minerals such as montmorillonite and kaolin, whose inherent properties of hydroexpansiveness and hydrosliming can be considered the dominant factors contributing to the seepage properties of weakly cemented rock with low permeability.

Experimental Study on Parameters of Duncan-Chang Model for Cement-Soil

2013 ◽  
Vol 641-642 ◽  
pp. 403-409
Author(s):  
Cai Fu Qian ◽  
Xin Jiang Song ◽  
Jie Wu ◽  
Wei Li
Keyword(s):  
Experimental Study ◽  
Calculation Method ◽  
Confining Pressure ◽  
Elastic Theory ◽  
Triaxial Tests ◽  
Stress Strain ◽  
Pressure Decrease ◽  
Cement Soil ◽  
Nonlinear Elastic ◽  
Chang Model

The conventional triaxial tests for cement-soil show stronger soften characteristics of cement-soil under low confining pressure. The soften character is weaken as confining pressure decrease. For adopting Duncan-Chang hyperbola model to obtain parameters of cement-soil, the model cannot include the stress-strain soften characteristics of cement-soil, and must be discussed. The paper studies on parameters of Duncan-Chang model using generalized Hooke law and nonlinear elastic theory. The researches show the parameters of k and n are unrelated to soften characteristics of cement-soil; the relation of Rf and σ3 is given by the soften characteristics, Rf influence the soften process directly. The calculation method could be used in E-u model, and has good practical value.

Experimental Study of Stress-Strain Characteristics of the Fly Ash Blended with Curing Agent

2010 ◽  
Vol 168-170 ◽  
pp. 1934-1942
Author(s):  
Zheng Shen ◽  
Lan Zong ◽  
Xiang Dong
Keyword(s):  
Fly Ash ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Uniaxial Stress ◽  
Curing Agent ◽  
Compression Tests ◽  
Growth Trend ◽  
Stress Strain ◽  
Confining Pressures ◽  
Triaxial Compression Tests

The stress-strain characteristics of the fly ash blended with curing agent was studied using uniaxial and triaxial compression tests. Curing agent JNS-2 was used as the stabilizing agents in sample preparation. Four curing agent JNS-2 contents of 3%, 6%, 9% and 12% were selected for sample preparation. UU triaxial compression tests were conducted in a range of confining pressures from 100 kPa to 300 kPa. The experimental results obtained from the laboratory tests showed that curing age, mixture ratio, compaction degree and confining pressures had significant influence on the shape of curves. Uniaxial stress-strain test results demonstrated that the latter strength and deformation characteristics of the fly ash blended with curing agent grew little and with the increase of curing agent amount and compaction factor, the curve of uniaxial stress-strain changed significantly. On the other hand, triaxial stress-strain test results indicted that the failure strain showed a partial negative growth trend with the increase of curing agent amount, and the failure stress showed a partial positive growth trend with the increase of curing agent amount. When the curve was at high confining pressure, it showed hardening type, when at low confining pressure it showed softening type.

Sign in / Sign up

Export Citation Format

Share Document