scholarly journals Evaluating the Energy Efficiency of PCM-Integrated Lightweight Steel-Framed Building in Eight Different Cities of Warm Summer Humid Continental Climate

2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
Baurzhan Jangeldinov ◽  
Shazim Ali Memon ◽  
Jong Kim ◽  
Marzhan Kabdrakhmanova
Keyword(s):  
Energy Efficiency ◽  
Phase Change ◽  
Energy Savings ◽  
Constant Volume ◽  
Lightweight Steel ◽  
Heating And Cooling ◽  
Warm Summer ◽  
The Impact ◽  
Continental Climate ◽  
Selection Of

Phase change materials have been applied to a building framework to decrease energy and fossil fuel consumption as well as make the building sector more sustainable. Lightweight structures are attractive and increasingly being used in residential buildings. Hence, in this research, the energy efficiency and thermal performance of buildings located in eight various cities (Helsinki, Kiev, Saint Petersburg, Moscow, Stockholm, Toronto, Montreal, and Kiev) of warm summer humid continental climate (Dfb) were evaluated. The impact of heating and cooling energy savings pattern on the selection of optimum phase change material for each city has been demonstrated. In addition, the impact of volume of PCM, precisely the effect of varying and constant volume, on energy savings was assessed for the lightweight steel-framed building. Simulations were performed in EnergyPlus by applying eleven melting temperature ranges of PCM. Test results demonstrated that energy savings were higher in the swing season and the maximum temperature reduced during these months was 3.3°C. Heating and cooling energy savings were found to strongly influence the selection of optimum PCM. In cities where cooling energy savings were the highest, the optimum PCMs were PCMs 24-26 while in cities where heating energy savings were the highest, the optimum PCM was found to be PCM 21. For constant volume, the performance of optimum PCM raised when the surface area was enlarged, while the thickness of PCM was reduced. Overall, the application of PCM into lightweight steel-framed residential structure located in warm summer humid continental climate region is a feasible option.

scholarly journals Improving the energy efficiency of VoIP applications in IEEE 802.11 networks through control of the packetization rate

2017 ◽  
Author(s):  
Rafael Estepa ◽  
Antonio Estepa ◽  
Germán Madinabeitia ◽  
Mark Davis
Keyword(s):  
Energy Efficiency ◽  
Ieee 802.11 ◽  
Rate Control ◽  
Control Algorithm ◽  
Energy Savings ◽  
Dynamic Selection ◽  
802.11 Networks ◽  
Ieee 802.11 Networks ◽  
Rate Control Algorithm ◽  
Selection Of

This paper presents an adaptive algorithm that improves the energy efficiency of VoIP applications over IEEE 802.11 networks. The algorithm seeks to achieve the largest energy savings subject to reaching a minimum speech quality under the prevailing network conditions. The control mechanism used is the dynamic selection of the packet size during the communication.This algorithm has been implemented in an experimental testbed and the results demonstrate that our packetization rate control algorithm can provide energy savings in uncongested IEEE 802.11 networks (up to 30%). Furthermore, under poor network conditions the algorithm can prolong the duration of the call before it is dropped at the expense of a higher energy consumption.

scholarly journals Thermo-physical characteristics of building integrated phase change materials (PCM) and their applicability to energy efficient homes

2021 ◽  
Author(s):  
Omar Siddiqui
Keyword(s):  
Compressive Strength ◽  
Phase Change ◽  
Phase Change Materials ◽  
Energy Savings ◽  
Physical Characteristics ◽  
Comfort Level ◽  
Thermal Mass ◽  
Lower Phase ◽  
Physical Test ◽  
The Impact

The applicability of utilizing a variety of thermal mass including phase change materials with commonly used building materials is investigated through the use of simulations and physical testing. The thermal performance and occupant comfort potential of a novel solid-solid phase change material, known as Dal HSM, is compared and contrasted to commonly available forms of thermal mass. Detailed experimentation is conducted to successfully integrate Dal HSM with gypsum and concrete. The measurement of physical characteristics such as compressive strength and modulus of rupture is conducted to ensure that the PCM-composite compound retains the structural integrity to be utilized in a typical building. The use of thermal mass in the Toronto Net Zero house was found to contribute to energy savings of 10-15% when different types of thermal mass were used. The comfort level of the indoor occupants was also found to increase. The performance of Dal HSM was found to be comparable to a commercially available PCM known as Micronal in the heating mode. The cooling mode revealed that Dal HSM provided slightly lower energy savings when compared to Micronal due to a lower phase transition temperature and latent heat. The performance of physical test revealed a decrease in the compressive strength as the concentration of Dal HSM was increased in the PCM-gypsum specimens. Tests were also performed to analyze the impact of increasing the PCM concentration on the flexural strength of PCM-gypsum composite.

Impact of Climbing Plants on Buildings and Their Environment

2018 ◽  
pp. 297-309
Author(s):  
Jacek Borowski
Keyword(s):  
Plant Growth ◽  
Energy Savings ◽  
Economic Benefits ◽  
Climbing Plants ◽  
Heating And Cooling ◽  
Home Heating ◽  
The Impact

In this chapter, the impact of climbing plants on facades of buildings and their surroundings is presented. Benefits and risks of plant growth on the walls are discussed with respect to their durability. Economic benefits from the presence of vines are shown including energy savings for home heating and cooling. Additionally, the phytoremediation (cleaning up the environment by plants) properties of vines are describe. It should be stated that climbing plants can contribute to damage only in places where facades are damaged, plaster cracked, or where plants are incorrectly planted.

Analysis of Energy and Internal Environment Improvements in a Single Family House

2014 ◽  
Vol 899 ◽  
pp. 3-6 ◽  
Author(s):  
Martin Kamenský ◽  
Anna Vaskova ◽  
Marián Vertaľ
Keyword(s):  
Energy Efficiency ◽  
Energy Savings ◽  
Building Design ◽  
Low Energy ◽  
Internal Environment ◽  
Single Family ◽  
Cooling Period ◽  
Heating And Cooling ◽  
Family House

The next step in energy efficiency building design focus on near energy zero buildings. To design such buildings is important to understand how people use low energy building and to find reserves in energy. The paper presents an analysis of reserves in a family house. The analysis is done with simulations of different design and operation solutions based on knowledge from in situ measurements. Results show there are reserves in the heating and cooling period of year, which can lead to further energy savings of up to 15% and internal environment improvements.

scholarly journals Attaining sustainable high-rise office buildings in warm-summer-cold-winter climates: a case study on Frankfurt

2019 ◽  
Vol 14 (4) ◽  
pp. 533-542
Author(s):  
Yuanda Hong ◽  
Wu Deng ◽  
Collins I Ezeh ◽  
Zhen Peng
Keyword(s):  
Energy Savings ◽  
Building Energy ◽  
Energy Performance ◽  
Major Elements ◽  
Office Buildings ◽  
Cold Winter ◽  
Winter Climate ◽  
High Rise ◽  
Warm Summer ◽  
The Impact

Abstract Attaining sustainability in high-rise office buildings necessitates determining the major elements and their associating impacts on the energy performance of this building typology. This study investigates the impact of architectural and engineering features on the energy performance of high-rise office buildings within a warm-summer-cold-winter climate. A rectangular building plan form with a 1:1.44 plan ratio, vertical split core position and central atrium presented the best building performance. The plan form, core position and atrium effect accounted for 59, 30 and 11%, respectively, of an estimated 20.6% building energy savings. Furthermore, exploiting passive strategies founded on the climate and building features as defined by `PassivHaus’ standards further reduced the building energy usage.

scholarly journals The use of green walls and the impact on air quality and life standard

2019 ◽  
Vol 116 ◽  
pp. 00096
Author(s):  
Małgorzata Wesołowska ◽  
Marta Laska
Keyword(s):  
Urban Areas ◽  
Energy Savings ◽  
Traffic Noise ◽  
Residential Building ◽  
High Energy ◽  
Large Cities ◽  
Heating And Cooling ◽  
Air Pollutions ◽  
Green Walls ◽  
The Impact

People living in urban areas are exposed to a number of threats related with dense urban tissue and high number of vehicles. These include air pollutions, traffic noise and high temperatures. In addition, large cities are struggling with high energy consumption for heating and cooling purposes. One of the possibilities to reduce the mentioned undesirable effects is the use of vegetation on the walls. Plants absorbs the pollutants of air, produced the oxygen, mounted on external walls create thermal insulation and positively affect the psychological aspect. Green walls can be used both indoors and outdoors. The article presents literature review on green walls, describes their benefits and presents the calculations SPBT and possible energy savings taking into account the transmission losses for small residential building.

scholarly journals Impact of Energy Monitoring and Management Systems on the Implementation and Planning of Energy Performance Improved Actions: An Empirical Analysis Based on Energy Audits in Italy

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4723
Author(s):  
Carlos Herce ◽  
Enrico Biele ◽  
Chiara Martini ◽  
Marcello Salvio ◽  
Claudia Toro
Keyword(s):  
Energy Efficiency ◽  
Energy Savings ◽  
Energy Transition ◽  
Cost Effective ◽  
Clean Energy ◽  
Energy Performance ◽  
Management Systems ◽  
Energy Monitoring ◽  
Energy Audits ◽  
The Impact

The implementation of monitoring tools and energy management systems (EnMSs) supports companies in their long-term energy efficiency strategies, and they are essential to analyse the effectiveness of energy performance improvement actions (EPIAs). The first fundamental step towards increasing energy efficiency is the development of energy audits (EAs). EAs provide comprehensive information about the energy usage in a specific facility, identifying and quantifying cost-effective EPIAs. The crucial role of these tools in clean energy transition is remarked by the European Energy Efficiency Directive (EED), which promotes the implementation of EAs and EnMS programmes. The purpose of this work is to better understand the link between EnMSs (specifically ISO 50001) and EAs in the EED Article 8 implementation in two industrial and two tertiary sectors in Italy. Moreover, the impact of company size, energy monitoring systems, and EnMSs on planned and/or implemented EPIAs is analysed. Our findings show that, albeit the complexity of the variables involved in energy efficiency gap, the “energy savings/company” and “EPIA/site” ratios are higher in enterprises with an EnMS and monitoring system. Thus, a correct energy audit must always be accompanied by a specific monitoring plan if it is to be effective and useful to the company decision maker.

scholarly journals Multi-Criteria Decision-Making Method for Sustainable Energy-Saving Retrofit Façade Solutions

2021 ◽  
Vol 13 (23) ◽  
pp. 13168
Author(s):  
Ziortza Egiluz ◽  
Jesús Cuadrado ◽  
Andoni Kortazar ◽  
Ignacio Marcos
Keyword(s):  
Decision Making ◽  
Sensitivity Analysis ◽  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Savings ◽  
Multi Criteria Decision Making ◽  
Effective Energy ◽  
Economic Basis ◽  
Selection Of

The increasing energy consumption levels of buildings within Europe call for controlled consumption and improvements to energy savings and efficiency and effective energy efficiency regulations. However, many aging and energy-inefficient buildings require energetic retrofitting that can employ various façades solutions and insulation materials. The selection of the most sustainable options in each situation therefore requires a decision-making methodology that can be used to prioritize available retrofit solutions based on economic, functional, environmental and social criteria. In this paper, both the methodology and the economic basis of the retrofitting process are presented. The methodology was validated in a case study, and a sensitivity analysis also demonstrated its validity, robustness and stability

scholarly journals The effect of a density gradient in groundwater on ATES system efficiency and subsurface space use

2018 ◽  
Vol 45 ◽  
pp. 85-103
Author(s):  
Martin Bloemendal ◽  
Theo N. Olsthoorn
Keyword(s):  
Thermal Energy ◽  
Energy Savings ◽  
Salinity Gradient ◽  
Primary Energy ◽  
Density Gradients ◽  
Buoyancy Flow ◽  
Heating And Cooling ◽  
Vertical Hydraulic Conductivity ◽  
The Impact ◽  
Research Show

Abstract. A heat pump combined with Aquifer Thermal Energy Storage (ATES) has high potential in efficiently and sustainably providing thermal energy for space heating and cooling. This makes the subsurface, including its groundwater, of crucial importance for primary energy savings. ATES systems are often placed in aquifers in which salinity increases with depth. This is the case in coastal areas where also the demand for ATES application is high due to high degrees of urbanization in those areas. The seasonally alternating extraction and re-injection between ATES wells disturbs the preexisting ambient salinity gradient causing horizontal density gradients, which trigger buoyancy flow, which in turn affects the recovery efficiency of the stored thermal energy. This section uses analytical and numerical methods to understand and explain the impact of buoyancy flow on the efficiency of ATES in such situations, and to quantify the magnitude of this impact relative to other thermal energy losses. The results of this research show that losses due to buoyancy flow may become considerable at (a relatively large) ambient density gradients of over 0.5 kg m−3 m−1 in combination with a vertical hydraulic conductivity of more than 5 m day−1. Monowell systems suffer more from buoyancy losses than do doublet systems under similar conditions.

scholarly journals Thermo-physical characteristics of building integrated phase change materials (PCM) and their applicability to energy efficient homes

2021 ◽  
Author(s):  
Omar Siddiqui
Keyword(s):  
Compressive Strength ◽  
Phase Change ◽  
Phase Change Materials ◽  
Energy Savings ◽  
Physical Characteristics ◽  
Comfort Level ◽  
Thermal Mass ◽  
Lower Phase ◽  
Physical Test ◽  
The Impact

The applicability of utilizing a variety of thermal mass including phase change materials with commonly used building materials is investigated through the use of simulations and physical testing. The thermal performance and occupant comfort potential of a novel solid-solid phase change material, known as Dal HSM, is compared and contrasted to commonly available forms of thermal mass. Detailed experimentation is conducted to successfully integrate Dal HSM with gypsum and concrete. The measurement of physical characteristics such as compressive strength and modulus of rupture is conducted to ensure that the PCM-composite compound retains the structural integrity to be utilized in a typical building. The use of thermal mass in the Toronto Net Zero house was found to contribute to energy savings of 10-15% when different types of thermal mass were used. The comfort level of the indoor occupants was also found to increase. The performance of Dal HSM was found to be comparable to a commercially available PCM known as Micronal in the heating mode. The cooling mode revealed that Dal HSM provided slightly lower energy savings when compared to Micronal due to a lower phase transition temperature and latent heat. The performance of physical test revealed a decrease in the compressive strength as the concentration of Dal HSM was increased in the PCM-gypsum specimens. Tests were also performed to analyze the impact of increasing the PCM concentration on the flexural strength of PCM-gypsum composite.

Sign in / Sign up

Export Citation Format

Share Document