scholarly journals Evaluation of Hydrocarbon Generation Using Structural and Thermal Modeling in the Thrust Belt of Kuqa Foreland Basin, NW China

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Chengfu Lyu ◽  
Xixin Wang ◽  
Xuesong Lu ◽  
Qianshan Zhou ◽  
Ying Zhang ◽  
...  
Keyword(s):  
Source Rock ◽  
Oil And Gas ◽  
Thermal Evolution ◽  
Foreland Basin ◽  
Source Rocks ◽  
Mature Stage ◽  
Hydrocarbon Generation ◽  
Thrust Belt ◽  
Salt Layer ◽  
Kuqa Foreland Basin

The Kuqa Basin is a typical foreland basin in northwest China, characterized by compressive foreland fold-and-thrust belts and a regionally distributed huge salt layer. A large number of overthrust faults, fault-related folds, and salt-related structures are formed on the thrust belt due to strong compression and structural deformation, causing difficulty in simulation of the basin. In this study, modeling of the thermal history of the complicated compressional structural profiles in the Kuqa foreland basin was successfully conducted based on the advanced “Block” function introduced by the IES PetroMod software and the latest geological interpretation results. In contrast to methods used in previous studies, our method comprehensively evaluates the influence of overthrusting, a large thick salt layer with low thermal conductivity, fast deposition, or denudation on the thermal evolution history. The results demonstrate that the hydrocarbon generation center of the Kuqa foreland basin is in the deep layers of the Kelasu thrust belt and not in the Baicheng Sag center, which is buried the deepest. A surprising result was drawn about the center of hydrocarbon generation in the Kuqa foreland basin, which, although not the deepest in Baicheng Sag, is the deepest part of the Kelasu thrust Belt. In terms of the maturity of the source rock, there are obvious temporal and spatial differences between the different structural belts in the Kuqa foreland basin, such as the early maturation of source rocks and the curbing of uplift and hydrocarbon generation in the piedmont zone. In the Kelasu thrust belt, the source rock made an early development into the low mature-mature stage and subsequently rapidly grew into a high-over mature stage. In contrast, the source rock was immature at an early stage and subsequently grew into a low mature-mature stage in the Baicheng Sag–South slope belt. The time sequence of the thermal evolution of source rocks and structural trap formation and their matching determines the different accumulation processes and oil and gas compositions in the different structural belts of the Kuqa foreland basin. The matching of the multistage tectonic activity and hydrocarbon generation determines the characteristics of the multistage oil and gas accumulation, with the late accumulation being dominant. The effective stacking of the gas generation center, subsalt structural traps, reservoir facies of fine quality, and huge, thick salt caprocks creates uniquely favorable geological conditions for gas enrichment in the Kelasu foreland thrust belt.

scholarly journals Effects of igneous intrusions on source rock in the early diagenetic stage: A case study on Beipiao Formation in Jinyang Basin, Northeast China

2020 ◽  
Vol 12 (1) ◽  
pp. 990-1002
Author(s):  
Shouliang Sun ◽  
Tao Zhang ◽  
Yongfei Li ◽  
Shuwang Chen ◽  
Qiushi Sun
Keyword(s):  
Source Rock ◽  
Oil And Gas ◽  
Thermal Evolution ◽  
Vitrinite Reflectance ◽  
Scientific Basis ◽  
Source Rocks ◽  
Temperature History ◽  
Hydrocarbon Generation ◽  
Intrusive Body ◽  
Geochemical Parameters

AbstractMesozoic intrusive bodies play an important role in the temperature history and hydrocarbon maturation of the Jinyang Basin in northeastern China. The Beipiao Formation, which is the main source rock in Jinyang Basin, was intruded by numerous igneous bodies and dykes in many areas. The effects of igneous intrusive bodies on thermal evolution and hydrocarbon generation and migration in the Beipiao Formation were investigated. A series of samples from the outcrop near the intrusive body were analyzed for vitrinite reflectance (R0%) and other organic geochemical parameters to evaluate the lateral extension of the thermal aureole. The R0 values of the samples increase from a background value of ∼0.9% at a distance above 200 m from the intrusive body to more than 2.0% at the vicinity of the contact zone. The width of the altered zone is equal to the thickness of the intrusive body outcropped in the field. Organic geochemical proxies also indicate the intrusive body plays a positive and beneficial role in the formation of regional oil and gas resources. Due to the influence of the anomalous heat from the intrusive body, the hydrocarbon conversion rate of the source rocks of the Beipiao Formation was significantly improved. The accumulation properties and the storage capacity of the shales also greatly improved due to the intrusive body as indicated by the free hydrocarbon migration in the shales. This new understanding not only provides a reliable scientific basis for the accurate assessment of oil and gas genesis and resources in the Jinyang Basin but also provides guidance and reference for oil and gas exploration in the similar type of basin.

scholarly journals GEOCHEMICAL AND GEOSTATISTICAL ASSESSMENT OF CRETACEOUS COALS AND SHALES IN SOME NIGERAIN SEDIMENTARY BASINS FOR THEIR HYDROCARBON PRONESS AND MATURITY LEVELS

2020 ◽  
Vol 1 (2) ◽  
Keyword(s):  
Source Rock ◽  
Oil And Gas ◽  
Linear Regression Analysis ◽  
Sedimentary Basins ◽  
Source Rocks ◽  
Hydrocarbon Generation ◽  
Good Source ◽  
Type Iii ◽  
Limit Value ◽  
The Impact

The Rock–Eval pyrolysis and LECO analysis for 9 shale and 12 coal samples, as well as, geostatistical analysis have been used to investigate source rock characteristics, correlation between the assessed parameters (QI, BI, S1, S2, S3, HI, S1 + S2, OI, PI, TOC) and the impact of changes in the Tmax on the assessed parameters in the Cretaceous Sokoto, Anambra Basins and Middle Benue Trough of northwestern, southeastern and northcentral Nigeria respectively. The geochemical results point that about 97% of the samples have TOC values greater than the minimum limit value (0.5 wt %) required to induce hydrocarbon generation from source rocks. Meanwhile, the Dukamaje and Taloka shales and Lafia/Obi coal are found to be fair to good source rock for oil generation with slightly higher thermal maturation. The source rocks are generally immature through sub-mature to marginal mature with respect to the oil and gas window, while the potential source rocks from the Anambra Basin are generally sub-mature grading to mature within the oil window. The analyzed data were approached statistically to find some relations such as factors, and clusters concerning the examination of the source rocks. These factors were categorized into type of organic matter and organic richness, thermal maturity and hydrocarbon potency. In addendum, cluster analysis separated the source rocks in the study area into two groups. The source rocks characterized by HI >240 (mg/g), TOC from 58.89 to 66.43 wt %, S1 from 2.01 to 2.54 (mg/g) and S2 from 148.94 to 162.52 (mg/g) indicating good to excellent source rocks with kerogen of type II and type III and are capable of generating oil and gas. Followed by the Source rocks characterized by HI <240 (mg/g), TOC from 0.94 to 36.12 wt%, S1 from 0.14 to 0.72 (mg/g) and S2 from 0.14 to 20.38 (mg/g) indicating poor to good source rocks with kerogen of type III and are capable of generating gas. Howeverr, Pearson’s correlation coefficient and linear regression analysis shows a significant positive correlation between TOC and S1, S2 and HI and no correlation between TOC and Tmax, highly negative correlation between TOC and OI and no correlation between Tmax and HI. Keywords- Cretaceous, Geochemical, Statistical, Cluster; Factor analyses.

THE STRUCTURAL DEVELOPMENT AND HYDROCARBON POTENTIAL OF PALAEOZOIC SOURCE ROCKS IN THE ADAVALE BASIN REGION

1984 ◽  
Vol 24 (1) ◽  
pp. 393 ◽  
Author(s):  
V. L. Passmore ◽  
M. J. Sexton
Keyword(s):  
Middle Devonian ◽  
Oil And Gas ◽  
Structural Features ◽  
Source Rocks ◽  
Geochemical Data ◽  
Mature Stage ◽  
Hydrocarbon Generation ◽  
Structural Development ◽  
Seismic Reflection Data ◽  
Basin Region

The Adavale Basin of southwestern Queensland consists of a main depression and several isolated synclinal extensions, traditionally referred to as troughs. The depressions and troughs are erosional remnants of a once more extensive Devonian depositional basin, and are now completely buried by sediments of the overlying Cooper, Galilee and Eromanga Basins. Geophysical and drilling investigations undertaken since 1959 are the only source of information on the Adavale Basin. A single sub-economic discovery of dry gas at Gilmore and a few shows of oil and gas are the only hydrocarbons located in the basin to date.In 1980, the Bureau of Mineral Resources in cooperation with the Geological Survey of Queensland commenced a major, multidisciplinary investigation of the basins in southwestern Queensland. Four long (> 200 km) seismic lines from this study over the Adavale Basin region and geochemical data from 20 wells were used to interpret the Adavale Basin's development and its present hydrocarbon potential.The new seismic reflection data allow the well-explored main depression to be correlated with the detached troughs, some of which have little or no well information. The BMR seismic data show that these troughs were previously part of one large depositional basin in the Devonian, the depocentre of which lay east of a north-trending hingeline. Structural features and Devonian depositional limits and patterns have been modified from earlier interpretations as a result of the new seismic coverage. The maximum sediment thickness is re-interpreted to be 8500 m, considerably thicker than previous interpretation.recognised. The first one, a diachronous Middle Devonian unconformity, is the most extensive, and reflects the mobility of the basement during the basin's early history. The second unconformity within the Late Devonian Buckabie Formation reveals that there were two phases of deformation of the basin sediments.The geochemical results reported in this study show that most of the Adavale Basin sediments have very low concentrations of organic carbon and hydrocarbon fractions. Maturity profiles indicate that the best source rocks of the basin are now in the mature stage for hydrocarbon generation. However, at Gilmore and in the Cooladdi Trough, they have reached the dry gas stage. The maturity data provide additional evidence for the marked break in deposition and significant erosion during the Middle Devonian recognised on the seismic records, and extend the limits of this sedimentary break into the northern part of the main depression.Hydrocarbon potential of the Adavale Basin is fair to poor. In the eastern part of the basin, where most of the data are available, the prospects are better for gas than oil. Oil prospectivity may be improved in any exinite-rich areas that exist farther west, where palaeo-temperatures were lower.

scholarly journals 3D-Basin Modelling of the Lishui Sag: Research of Hydrocarbon Potential, Petroleum Generation and Migration

Energies ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 650 ◽  
Author(s):  
Jinliang Zhang ◽  
Jiaqi Guo ◽  
Jinshui Liu ◽  
Wenlong Shen ◽  
Na Li ◽  
...  
Keyword(s):  
Source Rock ◽  
Thermal Evolution ◽  
Vitrinite Reflectance ◽  
Three Dimensional ◽  
Source Rocks ◽  
Rock Properties ◽  
Hydrocarbon Generation ◽  
Hydrocarbon Accumulation ◽  
Southeastern Part ◽  
Petroleum Generation

The Lishui Sag is located in the southeastern part of the Taibei Depression, in the East China Sea basin, where the sag is the major hydrocarbon accumulation zone. A three dimensional modelling approach was used to estimate the mass of petroleum generation and accumulated during the evolution of the basin. Calibration of the model, based on measured maturity (vitrinite reflectance) and borehole temperatures, took into consideration two main periods of erosion events: a late Cretaceous to early Paleocene event, and an Oligocene erosion event. The maturation histories of the main source rock formations were reconstructed and show that the peak maturities have been reached in the west central part of the basin. Our study included source rock analysis, measurement of fluid inclusion homogenization temperatures, and basin history modelling to define the source rock properties, the thermal evolution and hydrocarbon generation history, and possible hydrocarbon accumulation processes in the Lishui Sag. The study found that the main hydrocarbon source for the Lishui Sag are argillaceous source rocks in the Yueguifeng Formation. The hydrocarbon generation period lasted from 58 Ma to 32 Ma. The first period of hydrocarbon accumulation lasted from 51.8 Ma to 32 Ma, and the second period lasted from 23 Ma to the present. The accumulation zones mainly located in the structural high and lithologic-fault screened reservoir filling with the hydrocarbon migrated from the deep sag in the south west direction.

The Evaluation of Potential of Shale Oil Resources in K1qn1 Formation of Southern Songliao Basin

2014 ◽  
Vol 1006-1007 ◽  
pp. 107-111
Author(s):  
Yan Wang ◽  
Wen Biao Huang ◽  
Min Wang
Keyword(s):  
Organic Matter ◽  
Source Rock ◽  
Thermal Evolution ◽  
Songliao Basin ◽  
Mature Stage ◽  
Type I ◽  
Hydrocarbon Generation ◽  
Shale Oil ◽  
Oil Resources ◽  
Geochemical Method

Based on the analysis of source rock geochemical index, with K1qn1 Formation of southern Songliao basin as the research objective layer, it’s concluded that the mean TOC value of shale in K1qn1 Formation is higher, generally more than 1%, which belongs to the best source rock. Most of shale organic matter types are type I and type II1. The thermal evolution degree of organic matter is generally in the mature stage: a stage of large hydrocarbon generation. With logging geochemical method applied, the calculated total resources of shale oil in K1qn1 formation are 15.603 billion tons. The II level of resources are 8.765 billion tons, which is more than 50% of the total resources. The I level of resources are 4.808 billion tons while the III level of resources 2.03 billion tons. Overall, the southern Songliao Basin still has a certain degree of prospecting and mining value.

Maturity Evolution of the Cambrian Source Rocks in the Tarim Basin

2012 ◽  
Vol 622-623 ◽  
pp. 1642-1645
Author(s):  
Zong Lin Xiao ◽  
Qing Qing Hao ◽  
Zhong Min Shen
Keyword(s):  
Source Rock ◽  
Tarim Basin ◽  
Source Rocks ◽  
Petroleum Exploration ◽  
Mature Stage ◽  
Hydrocarbon Generation ◽  
Foreland Basins ◽  
Structural History ◽  
Depositional Age ◽  
Petroleum Basin

The Tarim basin is an important petroleum basin in China, and the Cambrian strata are the major source rock successions in the basin. Integrated the source rock depositional and structural history with its geochemical and thermal parameters, this paper simulates the evolution of the Cambrian source rocks with the software Basinview. The simulation result shows that the main hydrocarbon-generation centers of the Manjiaer sag in the Tabei depression and the Tangguzibasi sag in the Southwest depression are characterized by their early hydrocarbon generation, and in the late Ordovician depositional age, they reached dry gas stage. The Kuqa and Southwest depressions developed in the Cenozoic foreland basins made the Cambrian source rocks mature rapidly in the Cenozoic period. The source rock maturity in the Tarim basin now is characterized by high in the east and west and low in the middle, and most of the area is in the over-mature stage in the present. This study can provide available maturity data for the next petroleum exploration work.

Hydrocarbon Generation Indication from Source Rock to Reservoir Rock: Case Studies of Anambra and Abakaliki Basins South-Eastern Nigeria

2016 ◽  
Author(s):  
Samuel Salufu ◽  
Rita Onolemhemhen ◽  
Sunday Isehunwa
Keyword(s):  
Case Studies ◽  
Source Rock ◽  
Oil And Gas ◽  
Vitrinite Reflectance ◽  
Source Rocks ◽  
Reservoir Rock ◽  
Hydrocarbon Generation ◽  
Geochemical Analysis ◽  
Anambra Basin ◽  
Oil Generation

ABSTRACT This paper sought to use information from outcrop sections to characterize the source and reservoir rocks in a basin in order to give indication(s) for hydrocarbon generation potential in a basin in minimizing uncertainty and risk that are allied with exploration and field development of oil and gas, using subsurface data from well logs, well sections, seismic and core. The methods of study includes detailed geological, stratigraphical, geochemical, structural,, petro-graphical, and sedimentological studies of rock units from outcrop sections within two basins; Anambra Basin and Abakaliki Basin were used as case studies. Thirty eight samples of shale were collected from these Basins; geochemical analysis (rockeval) was performed on the samples to determine the total organic content (TOC) and to assess the oil generating window. The results were analyzed using Rock wares, Origin, and Surfer software in order to properly characterize the potential source rock(s) and reservoir rock(s) in the basins, and factor(s) that can favour hydrocarbon traps. The results of the geological, stratigraphical, sedimentological, geochemical, and structural, were used to developed a new model for hydrocarbon generation in the Basins. The result of the geochemical analysis of shale samples from the Anambra Basin shows that the TOC values are ≥ 1wt%, Tmax ≥ 431°C, Vitrinite reflectance values are ≥ 0.6%, and S1+S2 values are &gt; 2.5mg/g for Mamu Formation while shale samples from other formations within Anambra Basin fall out of these ranges. The shale unit in the Mamu Formation is the major source rock for oil generation in the Anambra Basin while others have potential for gas generation with very little oil generation. The shale samples from Abakaliki Basin shows that S1+S2 values range from&lt; 1 – 20mg/g, TOC values range from 0.31-4.55wt%, vitrinite reflectance ranges from 0.41-1.24% and Tmax ranges from423°C – 466°C. This result also shows that there is no source rock for oil generation in Abakaliki Basin; it is either gas or graphite. This observation indicates that all the source rocks within Abakaliki Basin have exceeded petroleum generating stage due to high geothermal heat resulting from deep depth or the shale units have not attained catagenesis stage as a result of S1+S2 values lesser than 2.5mg/g despite TOC values of ≥ 0.5wt% and vitrinite reflectance values of ≥ 0.6%. The novelty of this study is that the study has been able to show that here there is much more oil than the previous authors claimed, and the distribution of this oil and gas in the basins is controlled by two major factors; the pattern of distribution of the materials of the source rock prior to subsidence and during the subsidence period in the basin, and the pattern and the rate of tectonic activities, and heat flow in the basin. If these factors are known, it would help to reduce the uncertainties associated with exploration for oil and gas in the two basins.

Quantifying the Effects of Salt Structures on Source Rocks Thermal Evolution of the Marine Sedimentary Basins

2020 ◽  
Author(s):  
Shaowen Liu ◽  
Liangshu Wang
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Tarim Basin ◽  
Thermal Evolution ◽  
Foreland Basin ◽  
Sedimentary Basins ◽  
Source Rocks ◽  
Burial Depth ◽  
Temperature Anomalies ◽  
Kuqa Foreland Basin

&lt;p&gt;Evaporitic salt is prevailed in marine sedimentary basins, and the discovered hydrocarbon reservoirs are generally associated with salt structures in the world; accordingly salt structures have attracted much attention from academic and industry during the past decade. Tarim Basin that locates in northwest China, is the largest marine sedimentary basin in China with great hydrocarbon resources potential. Previous studies of salt structures in this basin mainly focus on its strong sealing capacity and structural traps created by salt structures. However, besides its extreme impermeability and low viscosity, rock salt has another unique thermal properties, featured by a large thermal conductivity as high as 5~6 W/(m.K), usually 2~3 times greater than that of other common sedimentary rocks, but a relatively low radiogenic heat production. This strong contrast in thermal properties could change the evolving thermal regime and associated thermal history of the source rocks around salt bodies, but has not been understood well. Herein based on the theoretical models and interpreted salt bearing seismic profiles from the Kuqa Foreland Basin, northern Tarim Basin, we use the 2D finite element numerical experiments to investigate the impacts of salt structures on basin geothermal regime and associated hydrocarbon thermal evolution. Our results show that, owing to its high efficiency in heat conduction, the salt rocks would result in obviously positive temperature anomalies (3~13%) above the salt body and negative temperature anomalies (11~35%) in the subsalt, enhancing and restraining the thermal maturation of source rocks above and below the salt body, respectively. The amplitude and extent of geothermal effects of salt structures depend on the thermal conductivity, geometry, thickness and burial depth of the salt bodies. The thermally affected area around the salt body can be 2 time of salt radius laterally and 2~3 times of salt thickness vertically. Salt structures in the Kuqa Foreland Basin can prominently cool the subsalt formation temperature and accordingly reduce the thermal maturity (Ro) of Jurassic source rocks as much as 18%, enabling the source rocks to be still of gas generation other than over-mature stage as expected previously, which is favor for deep hydrocarbon preservation below salt. In particular, salt structures in the west and east Kuqa Foreland Basin show strong differences in their thickness, geometric pattern, burial depth and composition, the thermal effects of salt structures on thermal maturation of subsalt source rocks should differ accordingly, which is supported by the observed tempo-spatial variation of Ro for Jurassic source rocks in this basin. Finally, we propose that the geothermal effects of salt structures will be of great importance in the deep hydrocarbon resources potential assessment and exploration in marine sedimentary basins in China.&lt;/p&gt;

scholarly journals Hydrocarbon-Generating Potential of Eocene Source Rocks in the Abakaliki Fold Belt, Nigeria / Potencial za nastanek oglikovodikov v eocenskih izvornih kamninah nariva Abakaliki

2020 ◽  
Vol 66 (4) ◽  
pp. 223-233
Author(s):  
O.A. Oluwajana ◽  
A.O. Opatola ◽  
O.B. Ogbe ◽  
T.D. Johnson
Keyword(s):  
Source Rock ◽  
Oil And Gas ◽  
Threshold Value ◽  
Source Rocks ◽  
Hydrocarbon Generation ◽  
Fold Belt ◽  
Gaseous Hydrocarbon ◽  
Geochemical Model ◽  
The One ◽  
Rock Eval

AbstractSubsurface information on source rock potential of the Eocene shale unit of the Abakaliki Fold Belt is limited and has not been widely discussed. The total organic carbon (TOC) content and results of rock-eval pyrolysis for nine shale samples, as well as the one-dimensional (1D) geochemical model, from an exploration well in the Abakaliki Fold Belt were used to evaluate the source rock potentials and timing of hydrocarbon generation of Lower Eocene source rocks. The TOC content values of all the samples exceeded the minimum threshold value of 0.5 wt.% required for potential source rocks. A pseudo-Van Krevelen plot for the shale samples indicated Type II–III organic matter capable of generating gaseous hydrocarbon at thermally mature subsurface levels. The 1D burial model suggests that the Eocene source rock is capable of generating oil and gas at the present time. The modelled transformation ratio trend indicates that a fair amount of hydrocarbon has been expelled from the source rocks. The results of this study indicate that the Eocene source units may have charged the overlying thin Eocene sand bodies of the Abakaliki Fold Belt.

Sign in / Sign up

Export Citation Format

Share Document