Maturity Evolution of the Cambrian Source Rocks in the Tarim Basin

2012 ◽  
Vol 622-623 ◽  
pp. 1642-1645
Author(s):  
Zong Lin Xiao ◽  
Qing Qing Hao ◽  
Zhong Min Shen
Keyword(s):  
Source Rock ◽  
Tarim Basin ◽  
Source Rocks ◽  
Petroleum Exploration ◽  
Mature Stage ◽  
Hydrocarbon Generation ◽  
Foreland Basins ◽  
Structural History ◽  
Depositional Age ◽  
Petroleum Basin

The Tarim basin is an important petroleum basin in China, and the Cambrian strata are the major source rock successions in the basin. Integrated the source rock depositional and structural history with its geochemical and thermal parameters, this paper simulates the evolution of the Cambrian source rocks with the software Basinview. The simulation result shows that the main hydrocarbon-generation centers of the Manjiaer sag in the Tabei depression and the Tangguzibasi sag in the Southwest depression are characterized by their early hydrocarbon generation, and in the late Ordovician depositional age, they reached dry gas stage. The Kuqa and Southwest depressions developed in the Cenozoic foreland basins made the Cambrian source rocks mature rapidly in the Cenozoic period. The source rock maturity in the Tarim basin now is characterized by high in the east and west and low in the middle, and most of the area is in the over-mature stage in the present. This study can provide available maturity data for the next petroleum exploration work.

The transformation effect of source rock-derived acidic fluid on carbonate reservoir from simulation experiments

2020 ◽  
Author(s):  
Qian Ding ◽  
Zhiliang He ◽  
Dongya Zhu
Keyword(s):  
Physical Properties ◽  
Source Rock ◽  
Carbonate Reservoir ◽  
Carbonate Reservoirs ◽  
Source Rocks ◽  
Petroleum Exploration ◽  
Hydrocarbon Generation ◽  
High Quality ◽  
Simulation Experiments ◽  
Deep Layers

<p>Deep and ultra-deep carbonate reservoir is an important area of petroleum exploration. However, the prerequisite for predicting high quality deep ultra-deep carbonate reservoirs lays on the mechanism of carbonate dissolution/precipitation. It is optimal to perform hydrocarbon generation-dissolution simulation experiments to clarify if burial dissolution could improve the physical properties of carbonate reservoirs, while quantitatively and qualitatively describe the co-evolution process of source rock and carbonate reservoirs in deep layers. In this study, a series of experiments were conducted with the limestone from the Ordovician Yingshan Formation in the Tarim Basin, and the low maturity source rock from Yunnan Luquan, with a self-designed hydrocarbon generation-dissolution simulation equipment. The controlling factors accounted for the alteration of carbonate reservoirs and dissolution modification process by hydrocarbon cracking fluid under deep burial environments were investigated by petrographic and geochemical analytical methods. In the meantime, the transformation mechanism of surrounding rocks in carbonate reservoirs during hydrocarbon generation process of source rock was explored. The results showed that: in the burial stage, organic acid, CO<sub>2</sub> and other acidic fluids associated with thermal evolution of deep source rocks could dissolve carbonate reservoirs, expand pore space, and improve porosity. Dissolution would decrease with the increasing burial depth. Whether the fluid could improve reservoir physical properties largely depends on calcium carbonate saturation, fluid velocity, water/rock ratio, original pore structure etc. This study could further contribute to the prediction of high-quality carbonate reservoirs in deep and ultra-deep layers.</p>

scholarly journals Method for identifying effective carbonate source rocks: a case study from Middle–Upper Ordovician in Tarim Basin, China

2020 ◽  
Vol 17 (6) ◽  
pp. 1491-1511
Author(s):  
Jun-Qing Chen ◽  
Xiong-Qi Pang ◽  
Song Wu ◽  
Zhuo-Heng Chen ◽  
Mei-Ling Hu ◽  
...  
Keyword(s):  
Crude Oil ◽  
Source Rock ◽  
Tarim Basin ◽  
Fluid Pressure ◽  
Source Rocks ◽  
Hydrocarbon Generation ◽  
Upper Ordovician ◽  
Carbonate Source Rock ◽  
Carbonate Source ◽  
Effective Source

AbstractHydrocarbon expulsion occurs only when pore fluid pressure due to hydrocarbon generation in source rock exceeds the force against migration in the adjacent carrier beds. Taking the Middle–Upper Ordovician carbonate source rock of Tarim Basin in China as an example, this paper proposes a method that identifies effective carbonate source rock based on the principles of mass balance. Data from the Well YW2 indicate that the Middle Ordovician Yijianfang Formation contains effective carbonate source rocks with low present-day TOC. Geological and geochemical analysis suggests that the hydrocarbons in the carbonate interval are likely self-generated and retained. Regular steranes from GC–MS analysis of oil extracts in this interval display similar features to those of the crude oil samples in Tabei area, indicating that the crude oil probably was migrated from the effective source rocks. By applying to other wells in the basin, the identified effective carbonate source rocks and non-source rock carbonates can be effectively identified and consistent with the actual exploration results, validating the method. Considering the contribution from the identified effective source rocks with low present-day TOC (TOCpd) is considered, the long-standing puzzle between the proved 3P oil reserves and estimated resources in the basin can be reasonably explained.

Petroleum Geochemistry of the Loperot-1 Well in Lokichar Basin, Kenya

2016 ◽  
Author(s):  
David M. Katithi ◽  
David O. Opar
Keyword(s):  
Organic Matter ◽  
Source Rock ◽  
Shale Gas ◽  
Source Rocks ◽  
Geochemical Data ◽  
Mature Stage ◽  
Type I ◽  
Hydrocarbon Generation ◽  
Gas Generation ◽  
Gas Targets

ABSTRACT The work reports an in-depth review of bulk and molecular geochemical data to determine the organic richness, kerogen type and thermal maturity of the Lokhone and the stratigraphically deeper Loperot shales of the Lokichar basin encountered in the Loperot-1 well. Oil-source rock correlation was also done to determine the source rocks’ likelihood as the source of oil samples obtained from the well. A combination of literature and geochemical data analyses show that both shales have good to excellent potential in terms of organic and hydrogen richness to act as conventional petroleum source rocks. The Lokhone shales have TOC values of 1.2% to 17.0% (average 5.16%) and are predominantly type I/II organic matter with HI values in the range of 116.3 – 897.2 mg/g TOC. The Lokhone source rocks were deposited in a lacustrine depositional environment in episodically oxic-dysoxic bottom waters with periodic anoxic conditions and have Tmax values in addition to biomarker signatures typical of organic matter in the mid-mature to mature stage with respect to hydrocarbon generation and immature for gas generation with Ro values of 0.51 – 0.64%. The Loperot shales were shown to be possibly highly mature type II/III source rocks with TOC values of 0.98% – 3.18% (average 2.4%), HI of 87 – 115 mg/g TOC and Ro of 1.16 – 1.33%. The Lokhone shale correlate well with the Loperot-1 well oils and hence is proposed as the principal source rock for the oils in the Lokichar basin. Although both source rocks have good organic richness to act as shale gas plays, they are insufficiently mature to act as shale gas targets but this does not preclude their potential deeper in the basin where sufficient gas window maturities might have been attained. The Lokhone shales provide a prospective shale oil play if the reservoir suitability to hydraulic fracturing can be defined. A basin wide study of the source rocks thickness, potential, maturation and expulsion histories in the Lokichar basin is recommended to better understand the present-day distribution of petroleum in the basin.

scholarly journals Evaluation of Hydrocarbon Generation Using Structural and Thermal Modeling in the Thrust Belt of Kuqa Foreland Basin, NW China

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Chengfu Lyu ◽  
Xixin Wang ◽  
Xuesong Lu ◽  
Qianshan Zhou ◽  
Ying Zhang ◽  
...  
Keyword(s):  
Source Rock ◽  
Oil And Gas ◽  
Thermal Evolution ◽  
Foreland Basin ◽  
Source Rocks ◽  
Mature Stage ◽  
Hydrocarbon Generation ◽  
Thrust Belt ◽  
Salt Layer ◽  
Kuqa Foreland Basin

The Kuqa Basin is a typical foreland basin in northwest China, characterized by compressive foreland fold-and-thrust belts and a regionally distributed huge salt layer. A large number of overthrust faults, fault-related folds, and salt-related structures are formed on the thrust belt due to strong compression and structural deformation, causing difficulty in simulation of the basin. In this study, modeling of the thermal history of the complicated compressional structural profiles in the Kuqa foreland basin was successfully conducted based on the advanced “Block” function introduced by the IES PetroMod software and the latest geological interpretation results. In contrast to methods used in previous studies, our method comprehensively evaluates the influence of overthrusting, a large thick salt layer with low thermal conductivity, fast deposition, or denudation on the thermal evolution history. The results demonstrate that the hydrocarbon generation center of the Kuqa foreland basin is in the deep layers of the Kelasu thrust belt and not in the Baicheng Sag center, which is buried the deepest. A surprising result was drawn about the center of hydrocarbon generation in the Kuqa foreland basin, which, although not the deepest in Baicheng Sag, is the deepest part of the Kelasu thrust Belt. In terms of the maturity of the source rock, there are obvious temporal and spatial differences between the different structural belts in the Kuqa foreland basin, such as the early maturation of source rocks and the curbing of uplift and hydrocarbon generation in the piedmont zone. In the Kelasu thrust belt, the source rock made an early development into the low mature-mature stage and subsequently rapidly grew into a high-over mature stage. In contrast, the source rock was immature at an early stage and subsequently grew into a low mature-mature stage in the Baicheng Sag–South slope belt. The time sequence of the thermal evolution of source rocks and structural trap formation and their matching determines the different accumulation processes and oil and gas compositions in the different structural belts of the Kuqa foreland basin. The matching of the multistage tectonic activity and hydrocarbon generation determines the characteristics of the multistage oil and gas accumulation, with the late accumulation being dominant. The effective stacking of the gas generation center, subsalt structural traps, reservoir facies of fine quality, and huge, thick salt caprocks creates uniquely favorable geological conditions for gas enrichment in the Kelasu foreland thrust belt.

scholarly journals Fluid geochemistry of the Jurassic Ahe Formation and implications for reservoir formation in the Dibei area, Tarim Basin, northwest China

2018 ◽  
Vol 36 (4) ◽  
pp. 801-819 ◽  
Author(s):  
Shuangfeng Zhao ◽  
Wen Chen ◽  
Zhenhong Wang ◽  
Ting Li ◽  
Hongxing Wei ◽  
...  
Keyword(s):  
Natural Gas ◽  
Tarim Basin ◽  
Oil And Gas ◽  
Northwest China ◽  
Source Rocks ◽  
Coal Measure ◽  
Hydrocarbon Generation ◽  
Gas Reservoirs ◽  
Isotopic Analyses ◽  
Jurassic Coal

The condensate gas reservoirs of the Jurassic Ahe Formation in the Dibei area of the Tarim Basin, northwest China are typical tight sandstone gas reservoirs and contain abundant resources. However, the hydrocarbon sources and reservoir accumulation mechanism remain debated. Here the distribution and geochemistry of fluids in the Ahe gas reservoirs are used to investigate the formation of the hydrocarbon reservoirs, including the history of hydrocarbon generation, trap development, and reservoir evolution. Carbon isotopic analyses show that the oil and natural gas of the Ahe Formation originated from different sources. The natural gas was derived from Jurassic coal measure source rocks, whereas the oil has mixed sources of Lower Triassic lacustrine source rocks and minor amounts of coal-derived oil from Jurassic coal measure source rocks. The geochemistry of light hydrocarbon components and n-alkanes shows that the early accumulated oil was later altered by infilling gas due to gas washing. Consequently, n-alkanes in the oil are scarce, whereas naphthenic and aromatic hydrocarbons with the same carbon numbers are relatively abundant. The fluids in the Ahe Formation gas reservoirs have an unusual distribution, where oil is distributed above gas and water is locally produced from the middle of some gas reservoirs. The geochemical characteristics of the fluids show that this anomalous distribution was closely related to the dynamic accumulation of oil and gas. The period of reservoir densification occurred between the two stages of oil and gas accumulation, which led to the early accumulated oil and part of the residual formation water being trapped in the tight reservoir. After later gas filling into the reservoir, the fluids could not undergo gravity differentiation, which accounts for the anomalous distribution of fluids in the Ahe Formation.

scholarly journals Study on Geochemical Characteristics of tight sandstone gas accumulation in Linxing area

2020 ◽  
Vol 206 ◽  
pp. 01017
Author(s):  
Yangbing Li ◽  
Weiqiang Hu ◽  
Xin Chen ◽  
Litao Ma ◽  
Cheng Liu ◽  
...  
Keyword(s):  
Source Rock ◽  
Ordos Basin ◽  
Source Rocks ◽  
Hydrocarbon Generation ◽  
Light Hydrocarbons ◽  
Tight Sandstone ◽  
Source Type ◽  
Reservoir Type ◽  
Sandstone Reservoir ◽  
Main Component

Based on the comprehensive analysis of the characteristics of tight sandstone gas composition, carbon isotope, light hydrocarbons and source rocks in Linxing area of Ordos Basin, the reservoir-forming model of tight sandstone gas in this area is discussed. The study shows that methane is the main component of tight sandstone gas, with low contents of heavy hydrocarbons and non-hydrocarbons, mainly belonging to dry gas in the Upper Paleozoic in Linxing area. The values of δ13C1, δ13C2 and δ13C3 of natural gas are in the ranges of -45.6‰ ~ -32.9‰, -28.9‰ ~ -22.3‰ and -26.2‰~ -19.1‰, respectively. The carbon isotopic values of alkane gas show a general trend of positive carbon sequence. δ13C1 value is less than -30‰, with typical characteristics of organic genesis. There is a certain similarity in the composition characteristics of light hydrocarbons. The C7 series show the advantage of methylhexane, while the C5-7 series mainly shows the advantage of isoalkane. The tight sandstone gas in this area is mainly composed of mature coal-derived gas, containing a small amount of coal-derived gas and oil-type gas mixture. According to the mode of hydrocarbon generation, diffusion and migration of source rocks in Linxing area, the tight sandstone gas in the study area can be divided into three types of reservoir-forming assemblages: the upper reservoir type of the far-source type (upper Shihezi formation-shiqianfeng formation sandstone reservoir-forming away from source rocks), the upper reservoir type of the near-source type ( the Lower Shihezi formation sandstone reservoir-outside the source rock), and the self-storage type of the source type (Shanxi formation-Taiyuan formation source rock internal sand reservoir).

scholarly journals The Cambrian Henson Gletscher Formation: a mature to postmature hydrocarbon source rock sequence from North Greenland

1987 ◽  
Vol 133 ◽  
pp. 141-157
Author(s):  
F.G Christiansen ◽  
H Nøhr-Hansen ◽  
O Nykjær
Keyword(s):  
Source Rock ◽  
Source Rocks ◽  
Hydrocarbon Generation ◽  
Hydrocarbon Source Rock ◽  
Reservoir Rocks ◽  
Potential Source ◽  
Potential Reservoir ◽  
Field Season ◽  
North Greenland

During the 1985 field season the Cambrian Henson Gletscher Formation in central North Greenland was studied in detail with the aim of evaluating its potential as a hydrocarbon source rock. The formation contains organic rich shale and carbonate mudstone which are considered to be potential source rocks. These are sedimentologically coupled with a sequence of sandstones and coarse carbonates which might be potential reservoir rocks or migration conduits. Most of the rocks exposed on the surface are, however, thermally mature to postrnature with respect to hydrocarbon generation, leaving only few chances of finding trapped oil in the subsurface of the area studied in detail.

scholarly journals GEOCHEMICAL AND GEOSTATISTICAL ASSESSMENT OF CRETACEOUS COALS AND SHALES IN SOME NIGERAIN SEDIMENTARY BASINS FOR THEIR HYDROCARBON PRONESS AND MATURITY LEVELS

2020 ◽  
Vol 1 (2) ◽  
Keyword(s):  
Source Rock ◽  
Oil And Gas ◽  
Linear Regression Analysis ◽  
Sedimentary Basins ◽  
Source Rocks ◽  
Hydrocarbon Generation ◽  
Good Source ◽  
Type Iii ◽  
Limit Value ◽  
The Impact

The Rock–Eval pyrolysis and LECO analysis for 9 shale and 12 coal samples, as well as, geostatistical analysis have been used to investigate source rock characteristics, correlation between the assessed parameters (QI, BI, S1, S2, S3, HI, S1 + S2, OI, PI, TOC) and the impact of changes in the Tmax on the assessed parameters in the Cretaceous Sokoto, Anambra Basins and Middle Benue Trough of northwestern, southeastern and northcentral Nigeria respectively. The geochemical results point that about 97% of the samples have TOC values greater than the minimum limit value (0.5 wt %) required to induce hydrocarbon generation from source rocks. Meanwhile, the Dukamaje and Taloka shales and Lafia/Obi coal are found to be fair to good source rock for oil generation with slightly higher thermal maturation. The source rocks are generally immature through sub-mature to marginal mature with respect to the oil and gas window, while the potential source rocks from the Anambra Basin are generally sub-mature grading to mature within the oil window. The analyzed data were approached statistically to find some relations such as factors, and clusters concerning the examination of the source rocks. These factors were categorized into type of organic matter and organic richness, thermal maturity and hydrocarbon potency. In addendum, cluster analysis separated the source rocks in the study area into two groups. The source rocks characterized by HI >240 (mg/g), TOC from 58.89 to 66.43 wt %, S1 from 2.01 to 2.54 (mg/g) and S2 from 148.94 to 162.52 (mg/g) indicating good to excellent source rocks with kerogen of type II and type III and are capable of generating oil and gas. Followed by the Source rocks characterized by HI <240 (mg/g), TOC from 0.94 to 36.12 wt%, S1 from 0.14 to 0.72 (mg/g) and S2 from 0.14 to 20.38 (mg/g) indicating poor to good source rocks with kerogen of type III and are capable of generating gas. Howeverr, Pearson’s correlation coefficient and linear regression analysis shows a significant positive correlation between TOC and S1, S2 and HI and no correlation between TOC and Tmax, highly negative correlation between TOC and OI and no correlation between Tmax and HI. Keywords- Cretaceous, Geochemical, Statistical, Cluster; Factor analyses.

Liquid hydrocarbon characterization of the lacustrine Yanchang Formation, Ordos Basin, China: Organic-matter source variation and thermal maturity

2017 ◽  
Vol 5 (2) ◽  
pp. SF225-SF242 ◽  
Author(s):  
Xun Sun ◽  
Quansheng Liang ◽  
Chengfu Jiang ◽  
Daniel Enriquez ◽  
Tongwei Zhang ◽  
...  
Keyword(s):  
Organic Matter ◽  
Source Rock ◽  
Ordos Basin ◽  
Depositional Environments ◽  
Source Rocks ◽  
Type I ◽  
Hydrocarbon Generation ◽  
Type Ii ◽  
Thermal Maturity ◽  
Yanchang Formation

Source-rock samples from the Upper Triassic Yanchang Formation in the Ordos Basin of China were geochemically characterized to determine variations in depositional environments, organic-matter (OM) source, and thermal maturity. Total organic carbon (TOC) content varies from 4 wt% to 10 wt% in the Chang 7, Chang 8, and Chang 9 members — the three OM-rich shale intervals. The Chang 7 has the highest TOC and hydrogen index values, and it is considered the best source rock in the formation. Geochemical evidence indicates that the main sources of OM in the Yanchang Formation are freshwater lacustrine phytoplanktons, aquatic macrophytes, aquatic organisms, and land plants deposited under a weakly reducing to suboxic depositional environment. The elevated [Formula: see text] sterane concentration and depleted [Formula: see text] values of OM in the middle of the Chang 7 may indicate the presence of freshwater cyanobacteria blooms that corresponds to a period of maximum lake expansion. The OM deposited in deeper parts of the lake is dominated by oil-prone type I or type II kerogen or a mixture of both. The OM deposited in shallower settings is characterized by increased terrestrial input with a mixture of types II and III kerogen. These source rocks are in the oil window, with maturity increasing with burial depth. The measured solid-bitumen reflectance and calculated vitrinite reflectance from the temperature at maximum release of hydrocarbons occurs during Rock-Eval pyrolysis ([Formula: see text]) and the methylphenanthrene index (MPI-1) chemical maturity parameters range from 0.8 to [Formula: see text]. Because the thermal labilities of OM are associated with the kerogen type, the required thermal stress for oil generation from types I and II mixed kerogen has a higher and narrower range of temperature for hydrocarbon generation than that of OM dominated by type II kerogen or types II and III mixed kerogen deposited in the prodelta and delta front.

Sign in / Sign up

Export Citation Format

Share Document