scholarly journals Seismic Performance Evaluation of Precast Concrete Beam-to-Shear Link Composite Connection with Bending Moment and Shear Force Separate Method

2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Shujun Hu ◽  
Qi Guo ◽  
Xinfu Xiong ◽  
Jingang Xiong
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Shear Force ◽  
Concrete Beam ◽  
Precast Concrete ◽  
Bending Moment ◽  
Shear Link ◽  
Shear Connectors ◽  
Concrete Frame ◽  
Resilience Capacity

A new type of prefabricated reinforced concrete-Y-shaped eccentrically steel brace structure (PRC-Y-ESBS) is developed by combining the mechanical property of prefabricated reinforced concrete frame and Y-shaped eccentrically steel brace, so the seismic performance and seismic resilience capacity of prefabricated reinforced concrete frame can be effectively improved. In the PRC-Y-ESBS, the precast concrete beam-to-shear link composite connection should have enough bearing capacity and resilience capacity under the shear force and bending moment, so the damage can be restricted in shear links. In this paper, an innovative precast concrete beam-to-shear link composite connection (PCB-SLCC) with bending moment and shear force separate method is proposed. Four different types of shear connectors are analyzed in detail by using the verified numerical method, and the shear capacity and failure mode of shear connectors can be obtained. Then, the innovative PCB-SLCCs with the reasonable shear connector considering different influencing parameters are also studied in detail. The results indicate that the shear connectors and high-strength bolts are still in elastic state at ultimate load, and little damage has occurred in the concrete between the embedded plate and precast concrete frame, while the PCB-SLCC has enough bearing capacity at the ultimate stage. In addition, this study also clearly identifies that high-strength bolts can only bear the bending moment, and the shear force is only carried by shear connectors, so the bending moment and shear force of the innovative PCB-SLCC with high bearing capacity, ease of installation, and seismic resilience capacity can be apparently separated.

Deformation Characteristics of Reinforced Concrete Beam-Column Joint Cores under Earthquake Loading

2003 ◽  
Vol 6 (1) ◽  
pp. 15-21 ◽  
Author(s):  
Sayed A. Attaalla ◽  
Mehran Agbabian
Keyword(s):  
Reinforced Concrete ◽  
Shear Deformation ◽  
Concrete Beam ◽  
Reinforced Concrete Beam ◽  
Reinforced Concrete Frame ◽  
Bond Failure ◽  
Strain Compatibility ◽  
Concrete Frame ◽  
Column Joint ◽  
Reinforced Concrete Frame Structures

The characteristics of the shear deformation inside the beam-column joint core of reinforced concrete frame structures subjected to seismic loading are discussed in this paper. The paper presents the formulation of an analytical model based on experimental observations. The model is intended to predict the expansions of beam-column joint core in the horizontal and vertical directions. The model describes the strain compatibility inside the joint in an average sense. Its predictions are verified utilizing experimental measurements obtained from tests conducted on beam-column connections. The model is found to adequately predict the components of shear deformation in the joint core and satisfactorily estimates the average strains in the joint hoops up to bond failure. The model may be considered as a simple, yet, important step towards analytical understanding of the sophisticated shear mechanism inside the joint and may be implemented in a controlled-deformation design technique of the joint.

Analysis on Deformation of Pre-Splitting Steel Reinforced Concrete Beams Strengthened by Prestressed CFRP

2011 ◽  
Vol 243-249 ◽  
pp. 929-933
Author(s):  
Na Ha ◽  
Lian Guang Wang ◽  
Shen Yuan Fu
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Concrete Beams ◽  
Bending Moment ◽  
Reinforced Concrete Beams ◽  
Steel Reinforced Concrete ◽  
Cfrp Sheets ◽  
Deformation Curves ◽  
Prestressed Cfrp Sheets ◽  
Theoretical Results

In order to improve the bearing capacity of SRC which is related with deformation and stiffiness, SRC beams should be strengthened by CFRP. Based on the experiment of six pre-splitting steel reinforced concrete beams strengthened with (Prestressed) CFRP sheets, the deformation of beams are discussed. Load-deformation curves are obtained by the experiment. Considering the influence of intial bending moment on SRC beams, the calculated deformation formulas of SRC beams strengthened by (Prestressed) CFRP are deduced. The results showed that the load-deformation curves of normal and strengthened beams respectively showed three and two linear characteristics. The theoretical results which calculated by the formulas of deformation are well agreement with the experimental results.

THE ANALYSIS OF SHEAR STRENGTH OF FLEXURAL RC ELEMENTS ACCORDING TO EC2 AND STR / LENKIAMŲJŲ GELŽBETONINIŲ ELEMENTŲ ĮSTRIŽOJO PJŪVIO STIPRUMO PAGAL STR IR EC2 ANALIZĖ

2013 ◽  
Vol 4 (4) ◽  
pp. 133-144 ◽  
Author(s):  
Šarūnas Kelpša ◽  
Mindaugas Augonis
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Cross Section ◽  
Shear Force ◽  
Bending Moment ◽  
Intersection Point ◽  
Shear Reinforcement ◽  
Truss Model ◽  
Calculation Results ◽  
The Difference

When the various reinforced concrete structures are designed according to EC2 and STR, the difference of calculation results, is quite significant. In this article the calculations of shear strength of bending reinforced concrete elements are investigated according to these standards. The comparison of such calculations is also significant in the sense that the shear strength calculations are carried out according to different principles. The STR regulations are based on work of the shear reinforcement crossing the oblique section and the compressed concrete at the end of the section. In this case, at the supporting zone, the external bending moment and shear force should be in equilibrium with the internal forces in reinforcement and compressed concrete, i.e., the cross section must be checked not only from the external shear force, but also from bending moment. In EC2 standard, the shear strengths are calculated according to simplified truss model, which consists of the tension shear reinforcement bars and compressed concrete struts. The bending moment is not estimated. After calculation analysis of these two methods the relationships between shear strength and various element parameters are presented. The elements reinforced with stirrups and bends are investigated additionally because in EC2 this case is not presented. According to EC2 the simplified truss model solution depends on the compression strut angle value θ, which is limited in certain interval. Since the component of tension reinforcement bar directly depends on the angle θ and the component of compression strut depends on it conversely, then exists some value θ when the both components are equal. So the angle θ can be found when such two components will be equated. However, such calculation of angle θ became complicated if the load is uniform, because then the components of tension bar are estimated not in support cross section but in cross section that are displaced by distance d. So, the cube equation should be solved. For simplification of such solution the graphical method to find out the angle θ and the shear strength are presented. In these graphics the intersection point of two components (shear reinforcement and concrete) curves describes the shear strength of element. Santrauka Straipsnyje apžvelgtos ir palygintos STR ir EC2 įstrižojo pjūvio stiprumo skaičiavimo metodikos stačiakampio skerspjūvio elementams. Normatyve neapibrėžtas EC2 metodikos santvaros modelio spyrių posvyrio kampo skaičiavimas, lemiantis galutinį įstrižojo pjūvio stiprumą. Straipsnyje pateikiamos kampo θ apskaičiavimo lygtys, atsižvelgiant į apkrovimo pobūdį. Norint supaprastinti pateiktų lygčių sprendimą siūlomas grafoanalitinis sprendimo būdas, pritaikant papildomus koeficientus. EC2 neapibrėžia skaičiavimo išraiškų, kai skersinis armavimas yra apkabos ir atlankos. Minėtos išraiškos suformuluotos ir pateiktos straipsnyje. Nustačius EC2 metodikos dėsningumus siūlomas alternatyvus apytikslis skaičiavimo būdas atlankomis ir apkabomis armuotiems elementams. Straipsnyje apžvelgtos abi – STR ir EC2 – metodikos, išskiriant pagrindinius skirtumus ir dėsningumus.

Calculation of Ultimate Bearing Capacity of Prestressed Steel Reinforced Concrete Structure under Fire

2011 ◽  
Vol 250-253 ◽  
pp. 2857-2860 ◽  
Author(s):  
Yu Zhuo Wang ◽  
Chuang Guo Fu
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Fire Resistance ◽  
Concrete Structure ◽  
Concrete Beam ◽  
Reinforced Concrete Beam ◽  
Ultimate Bearing Capacity ◽  
Reinforced Concrete Structure ◽  
Steel Reinforced Concrete ◽  
Resistance Performance

Prestressed steel reinforced concrete structure, compared with other concrete structure has its unique advantages. So it is mainly used in large span and conversion layers. With the popularization of this structure,more attention should be payed on fire resistance performance. On the basis of reasonable assume,two steps model is used as concrete high strength calculation model. Simplified intensity decreased curve is used as rebar,steel and prestressed. Two ultimate bearing capacity formulas of prestressed steel reinforced concrete beam are established. One is for the beam whose tensile area is under fire, the other is for the beam whose compression area is under fire. Prestressed steel reinforced concrete structure has both prestressed concrete structure’s advantages and steel reinforced concrete structure ’s advantage. Steel reinforced concrete is used to improve the bearing capacity of the structure. Prestressed steel is used to improve the ultimate state of structure’s performance during normal use. Thereby structure’s performance is better to play. There are many similarities between prestressed steel reinforced concrete structure and steel reinforced concrete structure about fire resistance performance. Because of prestressed steel reinforced concrete structure’s own characteristics, there are still many problems about fire resistance. This paper mainly presented bending terminal bearing capacity of prestressed steel reinforced concrete beam under fire. Established simplified formulae for calculation, it is meet the engineering accuracy requirement.

scholarly journals Load Bearing Capacity Calculation of the System “Reinforced Concrete Beam – Deformable Base” under Torsion with Bending

2019 ◽  
Vol 97 ◽  
pp. 04059 ◽  
Author(s):  
Alexey Dem’yanov ◽  
Vladymir Kolchunov ◽  
Igor Iakovenko ◽  
Anastasiya Kozarez
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Cross Sections ◽  
Concrete Beam ◽  
Equations Of State ◽  
Reinforced Concrete Beam ◽  
Load Bearing Capacity ◽  
Load Bearing ◽  
Deformable Base ◽  
The Relationship

It is presented the formulation and solution of the load bearing capacity of statically indeterminable systems “reinforced concrete beam – deformable base” by spatial cross-sections under force and deformation effects. The solution of problem is currently practically absent in general form. It has been established the relationship between stresses and strains of compressed concrete and tensile reinforcement in the form of diagrams. The properties of the base model connections are described based on a variable rigidity coefficient. It is constructed a system of n equations in the form of the initial parameters method with using the modules of the force (strain) action vector. The equations of state are the dependences that establish the relationship between displacements which are acting on the beam with load. Constants of integration are determined by recurrent formulas. It makes possible to obtain the method of initial parameters in the expanded form and, consequently, the method of displacements for calculating statically indefinable systems. The values of the effort obtained could be used to determine the curvature and rigidity of the sections in this way. It is necessary not to set the vector modulusP, the deformation is set in any section (the module is considered as an unknown) during the problem is solving. This allows us to obtain an unambiguous solution even in the case when the dependence M–χ has a downward section, i.e one value of moment can correspond to two values of curvature.

Influence and Analysis on the Bearing Capacity of Reinforced-Concrete-Frame Node in Beam and Plate's Constraint

2013 ◽  
Vol 351-352 ◽  
pp. 342-346
Author(s):  
Tai Hua Yang ◽  
Xiao Yu ◽  
Jian Wu Gong ◽  
Bin Tang ◽  
Yang Zhi Zhong ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Reinforced Concrete Beam ◽  
Building Codes ◽  
Frame Structure ◽  
Reinforced Concrete Frame ◽  
Short Side ◽  
Concrete Frame ◽  
Shear Bearing Capacity ◽  
Formal Design

According to the domestic and foreign various building codes and a kind of limit fitting formula, to calculate and analyze the compressive bearing capacity of sandwich reinforced concrete beam-column nodes in a high-rising frame structure engineering, and to compare with the results calculated by Midas. They shown those are the facts that cant be neglected, the compressive bearing capacity of the sandwich node core area concrete in beam and plates constraint would improve and the amplitude of improving would be great. But current Chinese building codes haven't included them in the formal design provisions, these ways have to be perfected. In the same time, beam and plate constraint would also have a certain effect to the shear bearing capacity. By contrast, the shear bearing capacity in considering beam and plate constraint would increase 12% to 24%, it would get to 91% of the limit fitting formula calculation value when the short side was sheared, and it is 92% when the long side was sheared. That shown it is quite perfect in considering the effect of the orthogonal beam-plate constraints in domestic seismic code.

Parametric Reliability Analysis of the Seismic Bearing Capacity of Bottom Columns in Reinforced Concrete Frame Structure

2012 ◽  
Vol 204-208 ◽  
pp. 2478-2482
Author(s):  
You Bao Jiang ◽  
Yu Lai Zhao ◽  
Wei Jun Yang ◽  
Zhi Ling Gong
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Seismic Design ◽  
Reliability Index ◽  
Concrete Strength ◽  
Design Parameters ◽  
Reinforced Concrete Frame ◽  
Concrete Frame ◽  
Parametric Reliability ◽  
Seismic Bearing Capacity

After the Wenchuan earthquake, Chinese Code for Seismic Design of Buildings (GB50011-2010) adjusts some seismic design parameters. Taking into account the randomness of gravity load and earthquake action and the uncertainty of steel strength and concrete strength, this paper analyzes the reliability of seismic bearing capacity of reinforced concrete frame bottom columns. Based on the structural analysis software PKPM, which is in accordance with code for seismic design of buildings, the reliability index of seismic bearing capacity of reinforced concrete frame bottom columns is calculated by the Monte Carlo method with different parameters, such as different seismic intensity, different building storey number, different seismic adjustment coefficient (increment coefficient of frame columns end moment and increment coefficient of design value of combination moment of underlying frame columns lower end section), different horizontal span number, different column location (side column and interior column) and so on. The results indicate that the reliability index can reach 2.0 or above, and can meet the target requirements for all cases which are designed with the current code for seismic design of buildings (GB50011-2010).

Insulation Type Effect on the Direct Shear Behavior of Concrete Sandwich Panel (CSP) with Non-Shear Connectors

2013 ◽  
Vol 663 ◽  
pp. 154-158 ◽  
Author(s):  
Tae Sik Oh ◽  
Seok Joon Jang ◽  
Kang Min Lee ◽  
Hyun Do Yun
Keyword(s):  
Reinforced Concrete ◽  
Sandwich Panel ◽  
Residential Buildings ◽  
Precast Concrete ◽  
Test Results ◽  
Concrete Wall ◽  
Concrete Walls ◽  
Shear Connectors ◽  
Reinforced Concrete Walls ◽  
Pull Out

Precast concrete sandwich panels (PCSP) are often used as exterior cladding of residential buildings due to thermal efficiency. PCSP systems consist of two precast reinforced concrete walls separated by a layer of insulation and connected with connectors which penetrate the insulation layer and are anchored at two precast walls. This paper provides the pull-out test results of concrete sandwich panel (CSP) with non-shear connectors. The variables in this study were the casting direction of reinforced concrete walls and types of insulation. Test results indicated that the types of insulations and casting direction have a significant effect on the bond strength between concrete wall and insulation. The effect of insulation type is notable for CSP cast horizontally concrete walls.

Sign in / Sign up

Export Citation Format

Share Document