scholarly journals Electroacupuncture Regulates TRPV1 through PAR2/PKC Pathway to Alleviate Visceral Hypersensitivity in FD Rats

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Yong-li Han ◽  
Xing-ming Peng ◽  
Hong-xing Zhang ◽  
Song Chen ◽  
Liang-yu Zhang
Keyword(s):  
Gastrointestinal Motility ◽  
The Body ◽  
Visceral Hypersensitivity ◽  
Comfort Level ◽  
Protective Mechanism ◽  
Transmission Electron ◽  
Gastric Sensitivity ◽  
Better Than ◽  
Induced Amelioration ◽  
Superposition Effect

Visceral hypersensitivity (VH) is the predominant pathogenesis of functional dyspepsia (FD). Duodenal hypersensitivity along with nausea further reduces the comfort level in gastric balloon dilatation and inhibits gastric receptive relaxation. The potential mechanism behind electroacupuncture- (EA-) mediated alleviation of VH has not been elucidated. In an FD rat model with tail clamping stress, iodine acetamide (IA) induced VH. The rats were treated with EA with or without PAR2 antagonist FSLLRY-NH2, and the body weight, gastric sensitivity, compliance, and gastrointestinal motility were determined. Mast cells and activated degranulation were stained with toluidine blue (TB) staining and visualized under a transmission electron microscope (TEM). Immunofluorescence was used to detect the expression of PAR2, PKC, and TRPV1 in the duodenum and dorsal root ganglion (DRG) and that of CGRP, SP in DRG, and c-fos in the spinal cord. EA alone and EA + antagonist enhanced the gastrointestinal motility but diminished the expression of TRPV1, CGRP, SP, and c-fos-downstream of PAR2/PKC pathway and alleviated VH in FD rats. However, there was no obvious superposition effect between the antagonists and EA + antagonists. The effect of EA alone was better than that of antagonists and EA + antagonists 2 alone. EA-induced amelioration of VH in FD rats was mediated by TRPV1 regulation through PAR2/PKC pathway. This protective mechanism involved several pathways and included several targets.

Otoconia formation in the chick embryo

1983 ◽  
Vol 41 ◽  
pp. 572-573
Author(s):  
C.D. Fermin ◽  
M. Igarashi
Keyword(s):  
Chick Embryo ◽  
Inner Ear ◽  
Gallus Domesticus ◽  
The Body ◽  
Abnormal Behavior ◽  
Intensive Study ◽  
Basic Fuchsin ◽  
Gestational Period ◽  
Sensory Epithelia ◽  
Transmission Electron

Otoconia are microscopic geometric structures that cover the sensory epithelia of the utricle and saccule (gravitational receptors) of mammals, and the lagena macula of birds. The importance of otoconia for maintanance of the body balance is evidenced by the abnormal behavior of species with genetic defects of otolith. Although a few reports have dealt with otoconia formation, some basic questions remain unanswered. The chick embryo is desirable for studying otoconial formation because its inner ear structures are easily accessible, and its gestational period is short (21 days of incubation).The results described here are part of an intensive study intended to examine the morphogenesis of the otoconia in the chick embryo (Gallus- domesticus) inner ear. We used chick embryos from the 4th day of incubation until hatching, and examined the specimens with light (LM) and transmission electron microscopy (TEM). The embryos were decapitated, and fixed by immersion with 3% cold glutaraldehyde. The ears and their parts were dissected out under the microscope; no decalcification was used. For LM, the ears were embedded in JB-4 plastic, cut serially at 5 micra and stained with 0.2% toluidine blue and 0.1% basic fuchsin in 25% alcohol.

Scanning Secondary Electron Microscopy of Myofibrils Using Transmission Techniques

1975 ◽  
Vol 33 ◽  
pp. 556-557
Author(s):  
M. K. Lamvik
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Carbon Films ◽  
Photographic Recording ◽  
Transmission Electron ◽  
Thin Carbon ◽  
The Common ◽  
Scanning Electron ◽  
Better Than ◽  
Cellular Organelles

When observing small objects such as cellular organelles by scanning electron microscopy, it is often valuable to use the techniques of transmission electron microscopy. The common practice of mounting and coating for SEM may not always be necessary. These possibilities are illustrated using vertebrate skeletal muscle myofibrils.Micrographs for this study were made using a Hitachi HFS-2 scanning electron microscope, with photographic recording usually done at 60 seconds per frame. The instrument was operated at 25 kV, with a specimen chamber vacuum usually better than 10-7 torr. Myofibrils were obtained from rabbit back muscle using the method of Zak et al. To show the component filaments of this contractile organelle, the myofibrils were partially disrupted by agitation in a relaxing medium. A brief centrifugation was done to clear the solution of most of the undisrupted myofibrils before a drop was placed on the grid. Standard 3 mm transmission electron microscope grids covered with thin carbon films were used in this study.

Images and Applications of Ion Explosion Spike Pits

1990 ◽  
Vol 48 (1) ◽  
pp. 584-585
Author(s):  
P. Fraundorf ◽  
J. Tentschert
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Bulk Material ◽  
Coulomb Repulsion ◽  
The Body ◽  
Atomic Scale ◽  
Early Solar System ◽  
Transmission Electron ◽  
Nuclear Particle ◽  
Particle Tracks

Since the discovery of their etchability in the early 1960‘s, nuclear particle tracks in insulators have had a diverse and exciting history of application to problems ranging from the selective filtration of cancer cells from blood to the detection of 244Pu in the early solar system. Their usefulness stems from the fact that they are comprised of a very thin (e.g. 20-40Å) damage core which etches more rapidly than does the bulk material. In fact, because in many insulators tracks are subject to radiolysis damage (beam annealing) in the transmission electron microscope, the body of knowledge concerning etched tracks far outweighs that associated with latent (unetched) tracks in the transmission electron microscope.With the development of scanned probe microscopies with lateral resolutions on the near atomic scale, a closer look at the structure of unetched nuclear particle tracks, particularly at their point of interface with solid surfaces, is now warranted and we think possible. The ion explosion spike model of track formation, described loosely, suggests that a burst of ionization along the path of a charged particle in an insulator creates an electrostatically unstable array of adjacent ions which eject one another by Coulomb repulsion from substitutional into interstitial sites. Regardless of the mechanism, the ejection process which acts to displace atoms along the track core seems likely to operate at track entry and exit surfaces, with the added feature of mass loss at those surfaces as well. In other words, we predict pits whose size is comparable to the track core width.

Fin Level Defect Isolation Inside a FinFET Using Electron Beam Alteration of Current Flow

2017 ◽  
Author(s):  
H.J. Ryu ◽  
A.B. Shah ◽  
Y. Wang ◽  
W.-H. Chuang ◽  
T. Tong
Keyword(s):  
Electron Microscopy ◽  
Electron Beam ◽  
Focused Ion Beam ◽  
Current Flow ◽  
Ion Beam ◽  
The Body ◽  
Complete Understanding ◽  
Root Cause ◽  
Transmission Electron ◽  
Defect Isolation

Abstract When failure analysis is performed on a circuit composed of FinFETs, the degree of defect isolation, in some cases, requires isolation to the fin level inside the problematic FinFET for complete understanding of root cause. This work shows successful application of electron beam alteration of current flow combined with nanoprobing for precise isolation of a defect down to fin level. To understand the mechanism of the leakage, transmission electron microscopy (TEM) slice was made along the leaky drain contact (perpendicular to fin direction) by focused ion beam thinning and lift-out. TEM image shows contact and fin. Stacking fault was found in the body of the silicon fin highlighted by the technique described in this paper.

scholarly journals Reproductive biology, embryonic development and matrotrophy in the phylactolaemate bryozoan Plumatella casmiana

2021 ◽  
Author(s):  
Julian Bibermair ◽  
Andrew N. Ostrovsky ◽  
Andreas Wanninger ◽  
Thomas Schwaha
Keyword(s):  
Embryonic Development ◽  
Embryo Sac ◽  
The Body ◽  
Transcellular Transport ◽  
Cell Contacts ◽  
Transmission Electron ◽  
Distal Side ◽  
Early Embryos ◽  
Mesoderm Formation ◽  
Cytoplasmic Processes

AbstractBryozoa is a phylum of aquatic, colonial suspension-feeders within the Lophotrochozoa. In the Phylactolaemata embryonic development occurs in an internal brood sac on the body wall accompanied by extraembryonic nutrition. Owing to previous contradictive descriptions, many aspects of their sexual reproduction require restudy. Consequently, this study analyses embryogenesis of the freshwater bryozoan Plumatella casmiana by serial sections, 3D reconstruction and transmission electron microscopy. Early embryos cleave and soon develop into blastulae with a small central cavity. The mesoderm forms by delamination starting from the distal side towards the proximal end. In later embryos two polypides form on the posterior side that ultimately will be covered by a ciliated mantle in the larva. Embryos increase in size during development and form temporary cell contacts to the embryo sac. Mesodermal cells of the embryo sac show signs of transcellular transport indicating that embryos are nourished by transferring nutrients from the maternal coelom towards the brood cavity. This study clarifies several details such as mesoderm formation and the onset of bud development. Embryos are connected to their respective embryo sacs by a variety of temporary cytoplasmic processes formed by both tissues during embryogenesis, including a ‘placental’ ring zone. Although ultrastructural data of these cell contacts are not entirely conclusive about their function, we suggest that embryos absorb nutrients via the entire surface. The close opposition of embryos to the embryo sac implies placentation as matrotrophic mode in phylactolaemate bryozoans, with embryo sacs acting as placental analogues.

scholarly journals “ALL IN ONE OR (W)HOLE IN ONE REPAIR” for Adult Total Brachial Plexus Palsy

2021 ◽  
Author(s):  
V. Purushothaman ◽  
K. Vinoth Kumar ◽  
Sabari Girish Ambat ◽  
R. Venkataswami
Keyword(s):  
Brachial Plexus ◽  
Hand Function ◽  
The Body ◽  
Salvage Procedure ◽  
Brachial Plexus Palsy ◽  
Nerve Reconstruction ◽  
Muscle Transfer ◽  
Young Males ◽  
Elbow Function ◽  
Better Than

Abstract Background Total brachial plexus palsy (TBPP) accounts for nearly 50% of all brachial plexus injuries. Since achieving a good functional hand was almost impossible, the aim was settled to get a good shoulder and elbow function. It was Gu, who popularized the concept of utilizing contralateral C7 (CC7) with vascularized ulnar nerve graft (VUNG) to get some hand function. We have modified it to suit our patients by conducting it as a single-stage procedure, thereby trying to get a functional upper limb. Methods From 2009 to 2014, we had 20 TBPP patients. We feel nerve reconstruction is always better than any other salvage procedure, including free muscle transfer. We modified Gu's concept and present our concept of total nerve reconstruction as “ALL IN ONE OR (W)HOLE IN ONE REPAIR.” Results All patients able to move their reconstructed limbs independently or with the help of contralateral limbs. Three patients developed hook grip and one patient was able to incorporate limbs to do bimanual jobs. One important observation is that all the reconstructed limbs regain the bulk, and to a certain extent, the attitude and appearance looks normal, as patients no longer hide it or hang it in a sling. Conclusion Adult brachial plexus injury itself is a devastating injury affecting young males. By doing this procedure, the affected limb is not dissociated from the rest of the body and rehabilitation can be aimed to get a supportive limb.

The ultrastructure of the epidermis of the redia and cercaria of Parorchis acanthus, Nicoll. A study by scanning and transmission electron-microscopy

Parasitology ◽  
1971 ◽  
Vol 62 (3) ◽  
pp. 479-488 ◽  
Author(s):  
Gwendolen Rees
Keyword(s):  
Electron Micrographs ◽  
Technical Assistance ◽  
Ventral Surface ◽  
The Body ◽  
Muscle Fibres ◽  
Scanning Electron Micrographs ◽  
Large Area ◽  
Transmission Electron ◽  
Parorchis Acanthus ◽  
Scanning Electron

Scanning electron-micrographs have shown the covering of microvilli on the surface of the redia of Parorchis acanthus. In the contracted state the elongated microvilli with bulbous extremities seen in the surface grooves may be the result of compression. The surface of the epidermis of the cercaria is smooth on a large area of the ventral surface and lattice-like with microvilli, laterally, anteriorly, dorsally and on the tail. The spines on the body can be withdrawn into sheaths by the contraction of muscle fibres inserted into the basement lamina below each spine.I would like to express my sincere gratitude to Dr I. ap Gwynn of this department for preparing the scanning electron-micrographs and the School of Engineering Science, University of North Wales, Bangor for the use of their stereoscan. I should also like to thank Mr M. C. Bibby for technical assistance and Professor E. G. Gray and Dr W. Sinclair for assistance with the transmission electron-micrographs.

scholarly journals Green Synthesis of Feather-Shaped MoS2/CdS Photocatalyst for Effective Hydrogen Production

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Yang Liu ◽  
Hongtao Yu ◽  
Xie Quan ◽  
Shuo Chen
Keyword(s):  
Electron Microscopy ◽  
Hydrogen Production ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Sulfur Source ◽  
X Ray ◽  
Transmission Electron ◽  
Microscopy Images ◽  
Effective Hydrogen ◽  
Better Than

MoS2/CdS photocatalyst was fabricated by a hydrothermal method for H2production under visible light. This method used low toxic thiourea as a sulfur source and was carried out at 200°C. Thus, it was better than the traditional methods, which are based on an annealing process at relatively high temperature (above 400°C) using toxic H2S as reducing agent. Scanning electron microscopy and transmission electron microscopy images showed that the morphologies of MoS2/CdS samples were feather shaped and MoS2layer was on the surface of CdS. The X-ray photoelectron spectroscopy testified that the sample was composed of stoichiometric MoS2and CdS. The UV-vis diffuse reflectance spectra displayed that the loading of MoS2can enhance the optical absorption of MoS2/CdS. The photocatalytic activity of MoS2/CdS was evaluated by producing hydrogen. The hydrogen production rate on MoS2/CdS reached 192 μmol·h−1. This performance was stable during three repeated photocatalytic processes.

Study on Modified Rapeseed Oil/Montmorillonite Nanocomposites

2010 ◽  
Vol 123-125 ◽  
pp. 1291-1294 ◽  
Author(s):  
Bin Lü ◽  
Jian Zhong Ma ◽  
Dang Ge Gao ◽  
Lei Hong
Keyword(s):  
Rapeseed Oil ◽  
Fourier Transforms ◽  
Raw Materials ◽  
Infrared Spectrometry ◽  
Emulsifying Properties ◽  
X Ray Diffraction ◽  
Layer Spacing ◽  
Transmission Electron ◽  
Ft Ir ◽  
Better Than

Modified rapeseed oil(MRO) was prepared by using rapeseed oil, ethylene diamine and acrylic acid as the raw materials. Modified rapeseed oil/montmorillonite(MRO/MMT) nanocomposite was prepared by using modified rapeseed oil and montmorillonite. The emulsifying properties of MRO and MRO/MMT were determined respectively. Fourier transforms infrared spectrometry (FT-IR) and Transmission Electron microscope (TEM) results showed that MRO/MMT was prepared successfully. X-ray diffraction (XRD) results showed that modified rapeseed oil could smoothly enter the interlayer of montmorillonite, and modified the montmorillonite; with an increase in the amount of montmorillonite, the layer spacing of montmorillonite in the MRO/MMT lower after the first increase. The results of emulsifying properties indicated that emulsifying properties of MRO/MMT was better than MRO.

scholarly journals Adhesion of cells to surfaces coated with polylysine. Applications to electron microscopy.

1975 ◽  
Vol 66 (1) ◽  
pp. 198-200 ◽  
Author(s):  
D Mazia ◽  
G Schatten ◽  
W Sale
Keyword(s):  
Electron Microscopy ◽  
Sea Urchin ◽  
Mammalian Cells ◽  
Experimental Treatment ◽  
The Body ◽  
Transmission Electron ◽  
Coated Plate ◽  
Living Material ◽  
Coated Surfaces ◽  
Triton X

Cells of many kinds adhere firmly to glass or plastic surfaces which have been pretreated with polylysine. The attachment takes place as soon as the cells make contact with the surfaces, and the flattening of the cells against the surfaces is quite rapid. Cells which do not normally adhere to solid surfaces, such as sea urchin eggs, attach as well as cells which normally do so, such as amebas or mammalian cells in culture. The adhesion is interpreted simply as the interaction between the polyanionic cell surfaces and the polycationic layer of adsorbed polylysine. The attachment of cells to the polylysine-treated surfaces can be exploited for a variety of experimental manipulations. In the preparation of samples for scanning or transmission electron microscopy, the living material may first be attached to a polylysine-coated plate or grid, subjected to some experimental treatment (fertilization of an egg, for example), then transferred rapidly to fixative and further passed through processing for observation; each step involves only the transfer of the plate or grid from one container to the next. The cells are not detached. The adhesion of the cell may be so firm that the body of the cell may be sheared away, leaving attached a patch of cell surface, face up, for observation of its inner aspect. For example, one may observe secretory vesicles on the inner face of the surface (3) or may study the association of filaments with the inner surface (Fig. 1). Subcellular structures may attach to the polylysine-coated surfaces. So far, we have found this to be the case for nuclei isolated from sea urchin embryos and for the microtubules of flagella, which are well displayed after the membrane has been disrupted by Triton X-100 (Fig. 2).

Sign in / Sign up

Export Citation Format

Share Document