scholarly journals Evaluation Method of Floor Heave Damage Degree and a Case Study in Zaoquan Coal Mine, China

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Ai Chen ◽  
Qing Ma ◽  
Xuesheng Liu
Keyword(s):  
Coal Mine ◽  
Coal Pillar ◽  
Stability Control ◽  
Floor Rock ◽  
Continuous Increase ◽  
Evaluation Indexes ◽  
Damage Degree ◽  
Geological Conditions ◽  
Floor Heave ◽  
Severe Type

With the continuous increase of mining depth and complex mining geological conditions, the mileage of roadways in underground engineering such as coal mine is increasing year by year. Complex conditions lead to different floor heave failure laws, and the control technology and strategy should be changed accordingly. How to evaluate the damage degree of floor heave under different conditions has become an urgent problem. Firstly, this paper makes a statistical analysis on the main evaluation indexes of the damage degree of roadway floor heave. Then, the fuzzy comprehensive clustering method is used to establish the classification method of floor heave damage degree, taking the floor heave amount, floor rock fragmentation degree, coal pillar size, buried depth, and floor lithology as evaluation indexes. The damage degree of floor heave can be divided into five types: light type, obvious type, severe type, destructive type, and extremely severe type. Finally, the rationality and accuracy of the method are verified by the measured value and evaluation value of No. 130203 roadway in the Zaoquan coal mine. The results can provide reference for the evaluation of the damage degree of the floor rock in similar condition mine and provide guidance for the design of the support and stability control of the failure of the roadway floor heave.

scholarly journals A Case Study on Large Deformation Failure Mechanism of Coal given Chamber and Invention of a New Wall-Mounted Coal Bunker in Xiashijie Coal Mine with Soft, Swelling Floor Rock

2017 ◽  
Author(s):  
Xingkai Wang ◽  
Wenbing Xie ◽  
Shengguo Jing ◽  
Jianbiao Bai ◽  
Zhili Su
Keyword(s):  
Failure Mechanism ◽  
Coal Mine ◽  
Numerical Models ◽  
Surrounding Rock ◽  
Engineering Practice ◽  
Floor Rock ◽  
Geological Conditions ◽  
Floor Heave ◽  
The Stability ◽  
Bearing Structure

Serious damage caused by floor heave in the coal given chamber of a vertical coal bunker is one of the challenges faced in underground coal mines. Engineering practice shows that it is more difficult to maintain the coal given chamber (CGC) than a roadway. More importantly, repairing the CGC during mining practice will pose major safety risks and reduce production. Based on the case of the serious collapse that occurred in the bearing structure of the CGC at the lower part of the 214# coal bunker in Xiashijie mine, China, this work analysed (i) the main factors influencing floor heave and (ii) the failure mechanism of the load-bearing structure in the CGC using FLAC2D numerical models and expansion experiment. The analysis results indicate that: the floor heave, caused mainly by mine water, is the basic reason leading to the instability and repeated failure of the CGC in the 214# coal bunker. Then a new coal bunker, without building the CGC, is proposed and put into practice to replace the 214# coal bunker. The FLAC3D software program is adopted to establish the numerical model of the wall-mounted coal bunker (WMCB), and the stability of the rock surrounding the WMCB is simulated and analysed. The results show that: (1) the rock surrounding the sandstone segment is basically stable. (2) The surrounding rock in the coal seam segment, which moves into the inside of the bunker, is the main zone of deformation for the entire rock mass surrounding the bunker. Then the surrounding rock is controlled effectively by means of high-strength bolt–cable combined supporting technology. According to the geological conditions of the WMCB, the self-bearing system, which includes (i) H-steel beams, (ii) H-steel brackets, and (iii) self-locking anchor cables, is established and serves as a substitute for the CGC to transfer the whole weight of the bunker to stable surrounding rock. The stability of the new coal bunker has been verified by field testing, and the coal mine has gained economic benefit to a value of 158.026174 million RMB over three years. The new WMCB thus made production more effective and can provide helpful references for construction of vertical bunkers under similar geological conditions.

scholarly journals Research on Mechanism and Control of Floor Heave of Mining-Influenced Roadway in Top Coal Caving Working Face

Energies ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 381 ◽  
Author(s):  
Xingping Lai ◽  
Huicong Xu ◽  
Pengfei Shan ◽  
Yanlei Kang ◽  
Zeyang Wang ◽  
...  
Keyword(s):  
Coal Mine ◽  
High Efficiency ◽  
Soft Rock ◽  
Surrounding Rock ◽  
High Yield ◽  
Geological Investigation ◽  
Geological Conditions ◽  
Floor Heave ◽  
Damage Depth ◽  
Squeeze Effect

The stability of the surrounding rock is the key problem regarding the normal use of coal mine roadways, and the floor heave of roadways is one of the key factors that can restrict high-yield and high-efficiency mining. Based on the 1305 auxiliary transportation roadway geological conditions in the Dananhu No. 1 Coal Mine, Xinjiang, the mechanism of roadway floor heave was studied by field geological investigation, theoretical analysis, and numerical simulation. We think that the surrounding rock of the roadway presents asymmetrical shrinkage under the original support condition, and it is the extrusion flow type floor heave. The bottom without support and influence of mining are the important causes of floor heave. Therefore, the optimal support scheme is proposed and verified. The results show that the maximum damage depth of the roadway floor is 3.2 m, and the damage depth of the floor of roadway ribs is 3.05 m. The floor heave was decreased from 735 mm to 268 mm, and the force of the rib bolts was reduced from 309 kN to 90 kN after using the optimization supporting scheme. This scheme effectively alleviated the “squeeze” effect of the two ribs on the soft rock floor, and the surrounding rock system achieves long-term stability after optimized support. This provides scientific guidance for field safe mining.

The Stability Control Technology of Crosscut while Mining without Coal Pillar in Steep Seam

2011 ◽  
Vol 90-93 ◽  
pp. 2073-2079
Author(s):  
Yu Feng Wang ◽  
Zhi Qiang Liu ◽  
Bin Song Jiang
Keyword(s):  
Support System ◽  
Coal Pillar ◽  
Stability Control ◽  
Surrounding Rock ◽  
Steep Seam ◽  
Floor Rock ◽  
Long Term Stability ◽  
Rock Collapse ◽  
The Stability

In order to improve the mining benefit of coal resources, Chang Gouyu Coal Mine carried out the technology of mining without coal pillar in steep seam. The key of the technology was to ensure a long-term stability of the cross-entry roadway across the seam. Through the analysis of the nature of steep seam roof and floor rock, and based on the stability analysis and loose circle measured of surrounding rock of crosscut roadway, we brought forward adopting shotcrete rockbolt mesh and U-shaped steel complex support structure system. This complex support system could flex lengthways and compress in radial direction. The entirety integrated with the surrounding rock, and they formed into a whole. Application of the complex support system could effectively control the deformation of the surrounding rock collapse, and maintain the stability of the crosscut.

The Integrated Control Countermeasures on Floor Heave of Broken Soft Rock with High Ground Stress

2014 ◽  
Vol 875-877 ◽  
pp. 2259-2263 ◽  
Author(s):  
Yao Bin Li
Keyword(s):  
Integrated Control ◽  
Soft Rock ◽  
Mining Area ◽  
Stability Control ◽  
Surrounding Rock ◽  
Deep Well ◽  
Rock Stability ◽  
Geological Conditions ◽  
Floor Heave ◽  
Key Issues

The floor heave is one of the key issues of surrounding rock stability control during the deep well mining process. To solve the problem about floor heave occupying the most of roof and floor convergence deformation, the author analyzed the engineering geological conditions of broken surrounding rock and the floor heave features in PanEr Coal Mine East 2 mining area when it through the fault zone with high pressure. It pointed out that we should make full use of the reinforcement of the roof and laneway's side to limit the deformation of the floor, and make use of overbreak, prestressed anchor cable, bottom corner bolt, deep hole grouting and backfill as direct bottom control countermeasures.

scholarly journals STUDY ON STABILITY CONTROL OF COAL MINE TUNNEL EXCAVATED IN WEAK ROCK MASS IN INDONESIA

2021 ◽  
Vol 6 (4) ◽  
Author(s):  
Phanthoudeth Pongpanya ◽  
Takashi Sasaoka2 ◽  
Hideki Shimada ◽  
Vongsavanh Soysouvanh
Keyword(s):  
Rock Mass ◽  
Numerical Simulations ◽  
Coal Mine ◽  
Support Systems ◽  
Stability Control ◽  
Weak Rock ◽  
Support Design ◽  
Floor Heave ◽  
Weak Rock Mass ◽  
The Stability

This paper focuses on the stability analysis and support design of the coal mine tunnel excavated in weak rock mass in an Indonesian underground coal mine through numerical simulations using the FLAC3D software. The PT Gerbang Daya Mandiri (GDM) coal mine situated in Indonesia was selected as a mine site in this study. According to the results of a series of numerical simulations, the stability of the mine tunnel decreases by increasing the depth and stress ratio. Ground control problems, for example falling roof, sidewall collapse, and floor heave are expected unless an appropriate support system is anticipated. Three support systems, including friction rockbolt, steel arch, and shotcrete are discussed as methods to stabilize the roof and sidewalls of the mine tunnel. From the simulated results, the steel arch is considered to be the most effective support method when compared with other support systems. The steel arch which is installed with closer space and larger crosssection delivers a better stability control to the roof and sidewalls of the mine tunnel. Although the stability of the roof and sidewalls of the mine tunnel can be maintained effectively by the steel arch support, the occurrence of floor heave is expected when the mining depth is increased. To control the floor stability of the mine tunnel, three techniques by applying cablebolt, invert-arch floor, and grooving method are therefore investigated and discussed. Based on simulated results, the heaving of the floor is well controlled after the cablebolt, invert-arch floor, and grooving methods are applied. Nevertheless, it is found that controlling the floor heave by cablebolt support could be the most suitable method comparing with other support systems in terms of the installation process, providing flat and safe working conditions of the floor, and economy. Additionally, the cablebolt with closer row space and longer length works more effectively to control the heaving problem of the floor. Keyword

Similarity simulation study on displacement and stress changes response to coal mining in Longdong coal mine, China

2020 ◽  
pp. qjegh2020-111
Author(s):  
Kai Huang ◽  
Long Xu ◽  
Fusheng Zha ◽  
Zhitang Lu ◽  
Jiwen Wu ◽  
...  
Keyword(s):  
Coal Seam ◽  
Coal Mine ◽  
Water Inrush ◽  
Coal Pillar ◽  
Working Face ◽  
Field Investigations ◽  
Geological Conditions ◽  
Stress Changes ◽  
Continuous Mining ◽  
The Stability

The complicated geological conditions, including the Fault Sun, in East No. 2 mining sub-area of the Longdong coal mine will influence the stability of strata during mining, leading to serious geological hazards. To circumvent this issue, a similarity simulation experiment was designed and performed in this study, in which the failure characteristics and evolution of displacement and stress within the strata were investigated, and the optimum width of a waterproof coal pillar was determined. The results showed that, as the working face progressed, the coal seam roof gradually deformed, from initial caving of the immediate roof to complete movement and curved subsidence of the entire roof. Significant changes in displacement and stress within the coal seam roof were recorded, and these increased during continuous mining activity. Displacement and stress difference on either side of the fault gradually increased and reached remarkable values with increase in mining distance. On the basis of the experiment results, water inrush is believed to be caused by the interaction between mining and the fault, and, as calculated from parameters collected in field investigations, a waterproof coal pillar of 50 m width should be established to prevent Fault Sun activation, thereby reducing the risk of water inrush from neighbouring aquifers.

scholarly journals Failure Mechanism and Control of Lower Retracement Channel in Close-Distance Double-Thick Coal Seams

2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Fulian He ◽  
Kai Lv ◽  
Xiaobin Li ◽  
Binbin Qin ◽  
Liang Li
Keyword(s):  
Dynamic Pressure ◽  
High Stress ◽  
Stable State ◽  
Coal Pillar ◽  
Field Investigation ◽  
Coal Seams ◽  
Floor Rock ◽  
Geological Conditions ◽  
Strata Behavior ◽  
Close Distance

Under the condition of close-distance double-thick coal seams’ mining, the serious strata behavior occurred in the lower retracement channel, which is affected by the double disturbance with upper coal-pillar static load and mining dynamic pressure. Field investigation, laboratory test, and numerical simulation were used to study the failure characteristics and stress distribution of N0381 retracement channel. The results show that the plastic failure and stress of the surrounding rock are obviously asymmetric; specifically, the closer the roof is to N0381 gob, the stronger the strata behavior is. In addition, when the upper coal pillar is in critical stable or stable state ( w / h > 2 ), high stress concentration in the upper coal pillar is transmitted downward through floor rock so that two dangerous areas with severe strata behavior are formed in N0381 retracement channel. In view of this, a partition control strategy with “high-pressure water jet + asymmetric high-strength cable-beam net + three-hole anchor cable group + roof grouting” as the core is proposed to ensure the stability of the lower retracement channel. This study provides a reference for coal mines with similar production geological conditions.

Reasonable Entry Layout of Lower Seam in Multi-Seam Mining Based on Numerical Simulation

2013 ◽  
Vol 295-298 ◽  
pp. 2980-2984
Author(s):  
Xiang Qian Wang ◽  
Da Fa Yin ◽  
Zhao Ning Gao ◽  
Qi Feng Zhao
Keyword(s):  
Numerical Simulation ◽  
Stress Distribution ◽  
Coal Seam ◽  
Coal Mine ◽  
Abutment Pressure ◽  
Surrounding Rock ◽  
Geological Conditions ◽  
Seam Mining

Based on the geological conditions of 6# coal seam and 8# coal seam in Xieqiao Coal Mine, to determine reasonable entry layout of lower seam in multi-seam mining, alternate internal entry layout, alternate exterior entry layout and overlapping entry layout were put forward and simulated by FLAC3D. Then stress distribution and displacement characteristics of surrounding rock were analyzed in the three ways of entry layout, leading to the conclusion that alternate internal entry layout is a better choice for multi-seam mining, for which makes the entry located in stress reduce zone and reduces the influence of abutment pressure of upper coal seam mining to a certain extent,. And the mining practice of Xieqiao Coal Mine tested the results, which will offer a beneficial reference for entry layout with similar geological conditions in multi-seam mining.

Principle of Well-Net Design for Coalbed Methane Exploitation in Coal Mine Area

2014 ◽  
Vol 543-547 ◽  
pp. 3967-3973
Author(s):  
Bao Shan Han
Keyword(s):  
Coal Mining ◽  
Coal Mine ◽  
Coalbed Methane ◽  
Design Theory ◽  
Surface Condition ◽  
Coal Pillar ◽  
Negative Influence ◽  
In Situ Stress ◽  
Well Location

There are abundant CBM (Coalbed Methane) in China. These CBM has caused a remarkable problem to the coal-mining in China. In order to improve the structure of Chinese energy and eliminate the risk of coal mine gas, the relevant industries and sections have implemented many explorations in CBM enriched areas. With great achievements, there are many important problems in the actions of CBM exploitation. The disadvantageous interaction of the surface CBM well and the later coal mining has been ignored at all. There are many disadvantages and defects. To solve these problems and eliminate or weaken the disadvantageous, the scientific and reasonable design of surface CBM well location is an important step. With the thinking of surface condition, coal mining plan, the arrangement of coal mine laneway, the direction and scale of the in-situ stress, and thinking more about the negative influence to and of surface CBM well, according to the theories of mining dynamics, mining engineering, mining geomechanics, and the CBM engineering, the design theory of the surface CBM well net can be studied. Finally, the arrangement principle of CBM product well in coal field is presented. The existing or future coal pillar will be a critical location for the surface CBM well location.

scholarly journals Substantiation of Safe Conditions During Undermining of Hydraulic Waste Disposal

2018 ◽  
Vol 41 ◽  
pp. 01007
Author(s):  
Yuriy Kutepov ◽  
Aleksandr Mironov ◽  
Maksim Sablin ◽  
Elena Borger
Keyword(s):  
Rock Mass ◽  
Waste Disposal ◽  
Coal Mine ◽  
Water Body ◽  
Water Inflow ◽  
Open Pit ◽  
Coal Seams ◽  
Geological Conditions ◽  
Mine Workings ◽  
Mine Dump

This article considers mining and geological conditions of the site “Blagodatny” of the mine named after A.D. Ruban located underneaththe old open pit coal mine and the hydraulic-mine dump. The potentially dangerous zones in the undermined rock mass have been identified based onthe conditions of formation of water inflow into mine workings. Safe depthof coal seams mining has been calculated depending on the type of water body – the hydraulic-mine dump.

Sign in / Sign up

Export Citation Format

Share Document