scholarly journals The Piston Ring-Cylinder Bore Interface Leakage of Bent-Axis Piston Pumps Based on Elastohydrodynamic Lubrication and Rotation Speed

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Lvjun Qing ◽  
Lichen Gu ◽  
Yan Wang ◽  
Wei Xue ◽  
Zhufeng Lei
Keyword(s):  
Film Thickness ◽  
Piston Ring ◽  
Rotation Speed ◽  
Elastohydrodynamic Lubrication ◽  
Oil Film ◽  
Proposed Model ◽  
Minimum Film Thickness ◽  
Oil Flow ◽  
Discharge Pressure ◽  
Cylinder Bore

The bent-axis piston pump is the core component of electrohydrostatic actuators (EHA) in aerospace applications, and its wear of key friction interfaces is greatly related to the healthy operation of pumps. The leakage of the piston ring-cylinder bore interface (PRCB), as the important part of the return oil flow of the pump house that commonly assesses the wear of key friction interfaces in piston pumps, is changed with the rotation speed. Thus, the wear of key friction interfaces is usually inaccurate by using the leakage of PRCB. In order to obtain the relationship between the PRCB leakage and the rotation speed, an elastohydrodynamic lubrication model is proposed. First, the proposed model includes a minimum film thickness model of PRCB to analyze the dynamic change of oil film of PRCB when subject to the elastohydrodynamic lubrication. After that, a mathematical model of PRCB is induced by combining the minimum film thickness model with the flow equation, which helps produce the effects of the oil film on the leakage of PRCB. The proposed model is verified by numerical simulation and experiment. The results show that the leakage of PRCB has a negative effect on the return oil flow of the pump case in the range of rotation speed of 700–1300 r/min and discharge pressure of 10–20 MPa. Furthermore, the leakage of PRCB is proportional to the rotation speed, but the return oil flow of the pump case is decreased. The effects of rotation speed are enhanced under the high discharge pressure conditions.

Influence of Surface Waviness on the Thermal Elastohydrodynamic Lubrication of an Eccentric-Tappet Pair

2013 ◽  
Vol 135 (2) ◽  
Author(s):  
J. Wang ◽  
C. H. Venner ◽  
A. A. Lubrecht
Keyword(s):  
Film Thickness ◽  
Elastohydrodynamic Lubrication ◽  
Surface Waviness ◽  
Film Pressure ◽  
Oil Film ◽  
Working Cycle ◽  
Temperature Oscillations ◽  
Minimum Film Thickness ◽  
Traction Coefficient ◽  
Oil Film Pressure

The effect of single-sided and double-sided harmonic surface waviness on the film thickness, pressure, and temperature oscillations in an elastohydrodynamically lubricated eccentric-tappet pair has been investigated in relation to the eccentricity and the waviness wavelength. The results show that, during one working cycle, the waviness causes significant fluctuations of the oil film, pressure, and temperature, as well as a reduction in minimum film thickness. Smaller wavelength causes more dramatic variations in oil film. The fluctuations of the pressure, film thickness, temperature, and traction coefficient caused by double-sided waviness are nearly the same compared with the single-sided waviness, but the variations are less intense.

Analysis of Tribological Performance of Piston Ring Lubrication

2011 ◽  
Author(s):  
Yibin Guo ◽  
Wanyou Li ◽  
Dequan Zou ◽  
Xiqun Lu ◽  
Tao He
Keyword(s):  
Film Thickness ◽  
Friction Force ◽  
Power Loss ◽  
Piston Ring ◽  
Design Parameters ◽  
Oil Film ◽  
Starved Lubrication ◽  
Piston Ring Lubrication ◽  
Cylinder Bore ◽  
Lubrication Conditions

In this paper a mixed lubrication model considering lubricant supply conditions on cylinder bore has been developed for the piston ring lubrication. The numerical procedures of both fully flooded and starved lubrication were included in the model. The lubrication equations and boundary conditions at the end of strokes were discussed in detail. The effects of piston ring design parameters, such as ring face profile and ring tension, on oil film thickness, friction force and power loss under fully flooded and starved lubrication conditions due to available lubricant supply on cylinder bore were studied. The simulation results show that the oil available in the inlet region of the oil film is important to the piston ring friction power loss. With different ring face crown heights and tensions, the changes of oil film thickness and friction force were apparent under fully flooded lubrication, but almost no changes were found under starved lubrication except at the end of a stroke. In addition, the oil film thickness and friction force were affected evidently by the ring face profile offsets under both fully flooded and starved lubrication conditions, and the offset towards the combustion chamber made a large contribution to forming thicker oil film during the expansion stroke. So under different lubricant supply conditions on the cylinder bore, the ring profile and tension need to be adjusted to reduce the friction and power loss. Moreover, the effects of lubricant viscosity, surface composite roughness, and engine operating speed on friction force and power loss were also discussed.

Relationship Between Temperature Distribution in EHL Film and Dimple Formation

2004 ◽  
Author(s):  
Kazuyuki Yagi ◽  
Keiji Kyogoku ◽  
Tsunamitsu Nakahara
Keyword(s):  
Phase Transition ◽  
Experimental Study ◽  
Temperature Distribution ◽  
Film Thickness ◽  
Elastohydrodynamic Lubrication ◽  
Infrared Emission ◽  
Maximum Temperature ◽  
Oil Film ◽  
Oil Flow ◽  
Ball Surface

This paper describes an experimental study on dimple formations under elastohydrodynamic lubrication (EHL) conditions. The oil film thickness between a ball surface and a sapphire disk was measured using optical interferometry and the temperatures of both the surfaces and of the oil film averaged across it were measured by an improved infrared emission technique. It was found that temperature profile across the oil film varies abruptly along the direction of the oil film thickness and the Couette flow decreases due to the viscosity wedge action as the oil flow is close to the dimple zone. The maximum temperature rise in the dimple zone sometimes reached above 400 K and thus the phase transition of the oil from liquid to glass may not occur.

A Study on the Distribution of Oil Film Thickness in the Circumferential Direction of Oil Ring in a Gasoline Engine

2019 ◽  
Author(s):  
Akemi Ito ◽  
Tadatsugu Hakkaku ◽  
Kazuya Mochiduki ◽  
Keita Tomotsune ◽  
Masatsugu Inui ◽  
...  
Keyword(s):  
Film Thickness ◽  
Piston Ring ◽  
Gasoline Engine ◽  
Axial Direction ◽  
Circumferential Direction ◽  
Sliding Surface ◽  
Oil Consumption ◽  
Measuring Point ◽  
Oil Film ◽  
Cylinder Bore

Abstract Oil traveling upward through the sliding surface of a piston ring causes oil consumption of an engine. Piston rings are designed considering conformability to deformed cylinder bore. However, cylinder deformation sometimes affects strongly oil consumption. It suggests that a piston ring cannot conform dynamically to the cylinder bore. In this study, distribution of oil film thickness of an oil ring was measured for investigating the dynamic conformability. An optical fiber has embedded in the sliding surface of the lower rail of the oil ring, and oil film thickness was measured by laser induced fluorescence method. The measuring point was rotated in the circumferential direction, so the distribution in both the circumferential and the axial direction could be measured. Thick oil films partially were found and it was found that the oil ring did not conformed to the deformed cylinder bore dynamically. Furthermore, such oil film showed thicker value than those expected theoretically. It was showed that dynamic conformability must be considered for piston ring design for reducing oil consumption.

Numerical Modeling of Unsteady Oil Film Motion Characteristics in Bearing Chambers

2015 ◽  
Vol 32 (3) ◽  
Author(s):  
Jingyu Zhao ◽  
Zhenxia Liu ◽  
Yaguo Lu ◽  
Jianping Hu
Keyword(s):  
Film Thickness ◽  
Theoretical Study ◽  
Rotation Speed ◽  
Three Dimensional ◽  
Lubricating Oil ◽  
Flow State ◽  
Oil Film ◽  
Model Based ◽  
Oil Flow ◽  
Motion Characteristics

AbstractTo obtain motion characteristics of the lubricating oil film on the aero-engine bearing chamber wall, a complete mathematical model based on theoretical study to solve three-dimensional unsteady oil film motion was established. On the basis of verifying the rationality of the computational model, the variations of the oil film thickness, velocity and temperature with the rotation speed and lubricating oil flow were analyzed and studied. The numerical results show that the following: In the stable oil film flow state, the oil film thickness shows a decreasing trend with increase in rotation speed and an increasing trend with increase in the lubricating oil flow. Particularly, comparison with the experimental work shows that the proposed numerical model based on theoretical study to solve unsteady oil film motion is a valuable technical means for the study of oil film movement mechanism and the design of actual bearing chamber.

Negative Pressures under a Lubricated Piston Ring

1978 ◽  
Vol 20 (1) ◽  
pp. 49-57 ◽  
Author(s):  
S. R. Brown ◽  
G. M. Hamilton
Keyword(s):  
Film Thickness ◽  
Piston Ring ◽  
Oil Film ◽  
Short Period ◽  
Minimum Film Thickness ◽  
Negative Pressures ◽  
The Dead ◽  
Peak Value ◽  
Dead Centre

Large negative pressures have been observed in the oil film lubricating a piston ring. Just after the dead-centre position, these reach a peak value of −0.78 MN/m2 (-113.1 lbf/in2), which is far in excess of the values normally assumed to be needed to produce cavitation. They are only sustained for a short period of time, but have the important effect of reducing the minimum film thickness.

The Influence of Surface Tension on Lubrication Film Thickness and Pressure

2010 ◽  
Vol 136 ◽  
pp. 307-311
Author(s):  
Jian Ping Liu ◽  
Xin Yi Zhang ◽  
Qing Xuan Jia
Keyword(s):  
Surface Tension ◽  
Film Thickness ◽  
Reynolds Equation ◽  
Elastohydrodynamic Lubrication ◽  
Thin Film Thickness ◽  
Oil Film ◽  
Lubrication Film ◽  
Minimum Film Thickness ◽  
Apparent Influence ◽  
Oil Film Pressure

Modified Reynolds equation is deduced considering surface tension in this paper. The influence of surface tension on lubrication and elastohydrodynamic lubrication is analyzed. Result shows surface tension has apparent influence on oil film thickness. It makes minimum film thickness increase under relative thin film thickness. The influence decreases rapidly with the increasing of film thickness. Surface tension has little influence on oil film pressure distribution.

Numerical and Experimental Study for Unsteady Oil Film Thickness of the Rotating Cylinder Chamber Wall

2015 ◽  
Vol 137 (12) ◽  
Author(s):  
Zhao Jingyu ◽  
Liu Zhenxia
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Film Thickness ◽  
Rotation Speed ◽  
Film Formation ◽  
Rotating Cylinder ◽  
Chamber Wall ◽  
Wall Heat Transfer ◽  
Oil Film ◽  
Oil Flow

The oil film thickness on the bearing chamber wall directly affects the wall heat transfer efficiency, so a fundamental study on the motion of oil film on the rotating cylinder has been conducted to this end. On the one hand, the rotating cylinder test rig was designed, and an ultrasonic measurement system was established to measure the dynamic oil film thickness. On the other hand, the unsteady oil film heat and mass transfer movement model was also established, and the numerical simulation to solve oil film motion by using computational fluid dynamic (CFD) commercial software was carried out. Meanwhile, on the basis of study on the oil film formation process and film thickness verification, the oil film distributions on the chamber wall with rotation speed and oil flow rate were analyzed and studied. Results show that the oil film on the rotating chamber wall experiences a development process from the oil film formation to basic stability, about 1.0 s in this paper. And comparison between the numerical and experimental data shows that the maximum error between experimental data and numerical simulation is 7.76%. Moreover, for the oil film distributions in the stable state, oil film thickness shows a trend of decreasing with the increasing of rotation speed, but increasing with the increasing of oil flow rate. The research here will provide the basis for subsequent study of the interaction between oil film motion and the wall heat transfer.

Predictive tool for frictional performance of piston ring-pack/liner conjunction

2019 ◽  
Vol 13 (3) ◽  
pp. 5513-5527
Author(s):  
J. W. Tee ◽  
S. H. Hamdan ◽  
W. W. F. Chong
Keyword(s):  
Film Thickness ◽  
Mathematical Models ◽  
Piston Ring ◽  
Published Data ◽  
Predictive Tool ◽  
Frictional Losses ◽  
Fundamental Understanding ◽  
Minimum Film Thickness ◽  
Piston Ring Pack ◽  
Ring Pack

Fundamental understanding of piston ring-pack lubrication is essential in reducing engine friction. This is because a substantial portion of engine frictional losses come from piston-ring assembly. Hence, this study investigates the tribological impact of different piston ring profiles towards engine in-cylinder friction. Mathematical models are derived from Reynolds equation by using Reynolds’ boundary conditions to generate the contact pressure distribution along the complete piston ring-pack/liner conjunction. The predicted minimum film thickness is then used to predict the friction generated between the piston ring-pack and the engine cylinder liner. The engine in-cylinder friction is predicted using Greenwood and Williamson’s rough surface contact model. The model considers both the boundary friction and the viscous friction components. These mathematical models are integrated to simulate the total engine in-cylinder friction originating from the studied piston ring-pack for a complete engine cycle. The predicted minimum film thickness and frictional properties from the current models are shown to correlate reasonably with the published data. Hence, the proposed mathematical approach prepares a simplistic platform in predicting frictional losses of piston ring-pack/liner conjunction, allowing for an improved fundamental understanding of the parasitic losses in an internal combustion engine.

Sign in / Sign up

Export Citation Format

Share Document