scholarly journals Quantitative Evaluation for Reinforcement Effect of Auxiliary Steel Beams Based on Running Safety and Dynamic Response

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Gong Kai ◽  
Liu Linya ◽  
Xiang Jun ◽  
Yang Haiming ◽  
Yu Cuiying
Keyword(s):  
Dynamic Response ◽  
Evaluation Method ◽  
Calculation Model ◽  
Vertical Vibration ◽  
Vibration Response ◽  
Steel Beams ◽  
Steel Beam ◽  
Allowable Limit ◽  
Running Safety ◽  
Spatial Vibration

Aiming at the existing heavy-haul railway, bridges hardly meet the transportation requirements. Based on the spatial vibration calculation model of the freight train–track–bridge (FTTB) system, the FTTB spatial vibration model under the condition of auxiliary steel beam reinforcement is established. Besides, according to the random analysis method of train derailment energy, coming up with an evaluation method of auxiliary steel beam reinforcement is based on safety and dynamic response, which is used to discuss the train safety and the change law of FTTB system vibration response. The results show that the derailment resistance of the FTTB system is increased by 22.6% after the auxiliary steel beam is reinforced. Compared with the previous speed (115.56 km/h), the speed is 132.73 km/h after the auxiliary steel beam reinforcement; at the same time, the allowable limit speed increases from 92.49 km/h to 106.18 km/h. In addition, the reinforcement of the auxiliary steel beam can not only effectively reduce the lateral vibration response of the FTTB system under the action of empty wagon but also effectively decline the vertical vibration response of the FTTB system under the action of the loaded wagon, which can meet the stability requirement for running at the speed of 90 km/h. In summary, the reinforcement of auxiliary steel beams can improve the running safety of trains, reduce the vibration response of the FTTB system, and meet the requirements of operation stability.

Experimental study on vertical vibration characteristics of medium-low speed maglev vehicle when standing still on steel beams

2021 ◽  
pp. 095440972110324
Author(s):  
Miao Li ◽  
Xiaohao Chen ◽  
Shihui Luo ◽  
Weihua Ma ◽  
Cheng Lei ◽  
...  
Keyword(s):  
Coupled System ◽  
Vertical Vibration ◽  
Vibration Characteristics ◽  
Steel Beams ◽  
Steel Beam ◽  
Air Spring ◽  
Low Speed ◽  
Maglev Vehicle ◽  
Excited Vibration ◽  
Eigen Frequencies

Levitation stability is the very basis for the dynamic operation of Electromagnetic Suspension (EMS) medium-low speed maglev trains (MSMT). However, self-excited vibration tends to occur when the vehicle is standing still above the lightweight lines, which remains a major constraint to the promotion of medium-low speed maglev technology. In order to study the vertical vibration characteristics of the coupled system of MSMT when it is standing still above lightweight lines, levitation tests were carried out on two types of steel beams: steel beam and active girder of the turnout, with a newly developed maglev vehicle using levitation frames with mid-set air spring. Firstly, modal tests were carried out on the steel beam to determine its natural vibration characteristics; secondly, the acceleration signals and the dynamic displacement signals of the air spring obtained at each measurement point were analyzed in detail in both the time and frequency domains, and the vertical ride comfort was assessed by means of the calculated Sperling index. Subsequently, theoretical explanations were given for the occurrence of self-excited vibration of coupled system from the perspective of the vehicle-to-guideway vibration energy input. Results show that the eigen frequencies of the vehicle on the steel beam and the turnout are 9.65 Hz and 2.15 Hz, respectively, the former being close to the natural frequency of the steel beam while the latter being close to the natural frequency of the air spring suspension system, thus causing the self-excited vibration of the coupled system. It is recommended to either avoid the main eigen frequencies of the coupled system or to increase the damping of the corresponding vibration modes to guarantee a reliable coupled system for its long-term performance. These results may provide valuable references for the optimal design of medium-low speed maglev systems.

scholarly journals The calculation of anchors in steel-concrete overlaps with precast slab

2019 ◽  
Vol 97 ◽  
pp. 06022
Author(s):  
Alexander Tusnin ◽  
Alexey Kolyago
Keyword(s):  
Reinforced Concrete ◽  
Cross Section ◽  
Concrete Slab ◽  
Element Model ◽  
Calculation Model ◽  
Concrete Slabs ◽  
Steel Beams ◽  
Steel Beam ◽  
Practical Application ◽  
Reinforced Concrete Slabs

Reinforced concrete floors and steel beams are widely used in buildings and structures for various purposes. Reinforced concrete overlaps can be cast-in or precast of hollow-core slabs. The most effective floors in which the concrete slab is located in the compressed area of cross-section, in steel beams in the tension zone, and shifting forces, arising between concrete slab and the steel beam, are perceived by anchors. Precast slabs in comparison with cast-in ones have less labor-intensive performance, the beam spacing is equal to the span of reinforced concrete slabs, there are no intermediate beams in such overlaps, that allows to reduce the floor thickness. The inclusion of precast in steel-concrete cross-section requires joints with steel beams, which requires using of special anchors. Anchor perceives shear forces and ensures the joint operation of the plate and the steel beam. In addition, for beams with narrow flange, the anchor device can provide the required width of the support slabs. The calculation of the attachment points of the anchors to the steel beam is carried out using three variants of calculation methods, which allow to determine the forces acting on the anchor. For practical application, a wire-element model has been proposed and managed to get forces in a steel beam, slab and anchors the width of the slab recommended by the standards should be included in the calculation model.

DYNAMIC BEHAVIOR OF TELESCOPIC CRANES BOOM

2013 ◽  
Vol 13 (01) ◽  
pp. 1350010 ◽  
Author(s):  
IOANNIS G. RAFTOYIANNIS ◽  
GEORGE T. MICHALTSOS
Keyword(s):  
Dynamic Response ◽  
Dynamic Analysis ◽  
Dynamic Behavior ◽  
Analytical Model ◽  
Constant Velocity ◽  
Steel Beam ◽  
Continuum Approach ◽  
Theoretical Formulation ◽  
Modal Superposition ◽  
Superposition Technique

Telescopic cranes are usually steel beam systems carrying a load at the tip while comprising at least one constant and one moving part. In this work, an analytical model suitable for the dynamic analysis of telescopic cranes boom is presented. The system considered herein is composed — without losing generality — of two beams. The first one is a jut-out beam on which a variable in time force is moving with constant velocity and the second one is a cantilever with length varying in time that is subjected to its self-weight and a force at the tip also changing with time. As a result, the eigenfrequencies and modal shapes of the second beam are also varying in time. The theoretical formulation is based on a continuum approach employing the modal superposition technique. Various cases of telescopic cranes boom are studied and the analytical results obtained in this work are tabulated in the form of dynamic response diagrams.

Vibration-based fault diagnosis of helical gear pair with tooth surface wear considering time-varying friction coefficient under mixed EHL condition

2021 ◽  
pp. 1-16
Author(s):  
Siyu Wang ◽  
Rupeng Zhu
Keyword(s):  
Dynamic Response ◽  
Hydrodynamic Lubrication ◽  
Helical Gear ◽  
Calculation Model ◽  
Tooth Surface ◽  
Time Varying ◽  
Gear Pair ◽  
Surface Wear ◽  
Mesh Stiffness ◽  
Helical Gear Pair

Abstract Based on “slice method”, the improved time-varying mesh stiffness (TVMS) calculation model of helical gear pair with tooth surface wear is proposed, in which the effect of friction force that obtained under mixed elasto-hydrodynamic lubrication (EHL) is considered in the model. Based on the improved TVMS calculation model, the dynamic model of helical gear system is established, then the influence of tooth wear parameters on the dynamic response is studied. The results illustrate that the varying reduction extents of mesh stiffness along tooth profile under tooth surface wear, in addition, the dynamic response in time-domain and frequency-domain present significant decline in amplitude under deteriorating wear condition.

scholarly journals Seismic Behavior and Study of RCS Composite Frame Composed of Steel Beams and Strong Concrete Column

2019 ◽  
Vol 15 (2) ◽  
pp. 142-153
Author(s):  
Ahmadreza Khodabandehlo ◽  
Mohamad Taghi Kazemi
Keyword(s):  
Reinforced Concrete ◽  
Seismic Behavior ◽  
Bending Strength ◽  
Steel Beams ◽  
Steel Beam ◽  
Concrete Column ◽  
Moment Frame ◽  
Reinforced Concrete Column ◽  
Long Span ◽  
Composite Frame

AbstractWith spreading of population and increasing of instruction, and also because of limited resources and materials, the demand for using novel materials in building industry has increased. The reinforced concrete columns and steel beams are used in structures with composite moment frame (RCS). Use of compression strength in proportion with concrete and bending strength of steel beam has bestowed these structures less weight than that of concrete structures and made it easier to access the measure of strong column - weak beam especially within long span in these structures. The most important part of these structures is connection of steel beam with the reinforced concrete column. These connections are divided into two general groups of connection with bracing beam and with bracing column from the joint. This paper aims to study the seismic behavior and parameters of RCS composite frame composed of steel beams and strong concrete column. The finite element method was analyzed by ABAQUS software and data analyzed by Excel.

scholarly journals A comparative study of beam design curves against lateral torsional buckling using AISC, EC and SP

2019 ◽  
Vol 15 (1) ◽  
pp. 25-32 ◽  
Author(s):  
Vera V Galishnikova ◽  
Tesfaldet H Gebre
Keyword(s):  
Steel Structures ◽  
Reduction Factor ◽  
Steel Beams ◽  
Steel Beam ◽  
Lateral Torsional Buckling ◽  
Torsional Buckling ◽  
Vertical Loading ◽  
Beam Design ◽  
Overall Stability

Introduction. Structural stability is an essential part of design process for steel structures and checking the overall stability is very important for the determination of the optimum steel beams section. Lateral torsional buckling (LTB) normally associated with beams subject to vertical loading, buckling out of the plane of the applied loads and it is a primary consideration in the design of steel structures, consequently it may reduce the load currying capacity. Methods. There are several national codes to verify the steel beam against LTB. All specifications have different approach for the treatment of LTB and this paper is concentrated on three different methods: America Institute of Steel Construction (AISC), Eurocode (EC) and Russian Code (SP). The attention is focused to the methods of developing LTB curves and their characteristics. Results. AISC specification identifies three regimes of buckling depending on the unbraced length of the member ( Lb ). However, EC and SP utilize a reduction factor (χ LT ) to treat lateral torsional buckling problem. In general, flexural capacities according to AISC are higher than those of EC and SP for non-compact sections.

scholarly journals Comparação entre a eficiência estrutural de perfis soldados de aço e perfis de aço formados a frio

2016 ◽  
Vol 12 (3) ◽  
Author(s):  
Uiatan Aguiar Nogueira ◽  
Matilde Batista Melo ◽  
Daniel De Lima Araujo
Keyword(s):  
Bending Strength ◽  
Steel Beams ◽  
Steel Beam ◽  
Structural Elements ◽  
Structural System ◽  
Welded Steel ◽  
Bending Tests ◽  
Structural Efficiency ◽  
Cold Formed Steel

RESUMO: A Análise de elementos estruturais, realizadas durante as etapas de projeto de uma estrutura, é parte fundamental para garantia de bom desempenho e estabilidade do sistema estrutural. Na execução de algumas estruturas, como as coberturas em edificações, é usual o emprego de perfis leves de aço formados a frio devido ao seu baixo peso. Esta pesquisa tem por objetivo avaliar a eficiência estrutural desses perfis quando comparados, por exemplo, aos perfis soldados compactos. Para tanto, foram realizados ensaios de flexão em quatro vigas biapoiadas submetidas a duas forças concentradas, de forma a se obter flexão pura no meio do vão das vigas. Estas foram instrumentadas para a determinação da sua rigidez e da sua resistência à flexão. A principal contribuição deste trabalho é demonstrar a eficiência estrutural de perfis formados a frio em seção caixa submetidos à flexão em comparação com perfis de seção tipo “H” soldados. ABSTRACT: The analysis of structural elements, in a structure’s design, is an essential step to ensure good performance and stability of the structural system. In any types of structures, such as roofing in buildings, it’s usual using cold-formed steel beams due to their small weight. This research seeks to evaluate the structural efficiency of cold-formed steel beams when compared, for example, to compact welded steel beams. Thus, bending tests were performed in four simply supported beams submitted to two concentrated loads, in order to obtain pure flexure at the mid-span of the beams. These beams were instrumented for the determination of their rigidity and bending strength. The results showed that the cold-formed steel beam, box-shaped, presented structural efficiency similar to the welded steel beam “H” shaped.

Interactive shear resistance of corrugated web in steel beam exposed to fire

2016 ◽  
Vol 7 (1) ◽  
pp. 69-78
Author(s):  
Mariusz Marcin Maslak ◽  
Marcin Lukacz
Keyword(s):  
Failure Modes ◽  
Steel Beams ◽  
Steel Beam ◽  
Safety Level ◽  
Design Algorithm ◽  
Content Type ◽  
Corrugated Webs ◽  
Buckling Resistance ◽  
Corrugated Web ◽  
Shear Buckling

Purpose The purpose of this paper is to present and discuss in detail the design approach to shear buckling resistance evaluation for corrugated web being a part of a steel beam exposed to fire. Design/methodology/approach It is based on the interaction between the local and global elastic instability failure modes as well as on the possible yielding of the whole web cross-section during fire. Findings New formulae, adequate for specification of the suitable shear buckling coefficients, depend not only on the web slenderness but also on the temperature of structural steel. Originality/value The methodology proposed by the authors can be added to the current European standard recommendations given in EN 1993-1-2 as a well-justified design algorithm helpful in reliable evaluation of a safety level for steel beams with slender corrugated webs subject to fire exposure. It seems to be highly desirable because, at present, there are no detailed instructions in this field.

Sign in / Sign up

Export Citation Format

Share Document