scholarly journals The Use of ZigBee Wireless Communication Technology in Industrial Automation Control

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
ShuYu Ding ◽  
JianLi Liu ◽  
MingHong Yue
Keyword(s):  
Control System ◽  
Wireless Communication ◽  
Monitoring System ◽  
Communication Technology ◽  
Data Transmission ◽  
High Energy ◽  
Transmission Model ◽  
Industrial Automation ◽  
Wireless Control ◽  
Automation Control

With the accelerating process of world industrialization, countries pay more attention to industrial modernization. In order to solve the problems of traditional control technology and system with low accuracy, high energy consumption, and high delay in industrial automation control and the difficulty in adapting to the new industrial production process, the new industrial automation control system is discussed and studied. The industrial automation control is studied, and a new monitoring system is designed for automation control by using ZigBee wireless communication technology. The design of the system data communication scheme is completed by the in-depth study and summary of ZigBee wireless communication technology. The hardware structure and software structure of ZigBee wireless communication module are designed, and the wireless monitoring system using ZigBee is established. Taking the production workshop of a pharmaceutical factory as the monitoring object, the working stability and data transmission efficiency of the model are tested. The experiment shows that the ZigBee wireless transmission model has lower temperature and better stability than the wired transmission system in the working process. Compared with the traditional wired control system, the temperature of ZigBee wireless control system is lower when it works. The difference between the highest temperature and the lowest temperature is 0.1°C. In the overall work flow, the system temperature is lower than that of the wired control. ZigBee wireless control has good stability. Subsequently, the method of manually setting obstacles is used to test the effectiveness of data transmission. The experiment found that in the absence of barrier, the maximum effective transmission distance was 40 meters, and the packet loss rate was very low, which could ensure the timeliness of data. Therefore, this system can be applied to industrial automation control. The research results can provide some reference for the design of new control systems in other industrial control fields. The improved system can also be applied to other industries. ZigBee is a short-range technology for wireless sensor networks, and it is a two-way communication technology with low power consumption, low data rate, and low cost. It can be applied to automatic control and remote control. This provides a platform for wireless networking and control of small and cheap devices. ZigBee will not compete with connection technologies such as Wi-Fi. Meanwhile, it will greatly stimulate the progress of the industrial market.

Design of the Monitoring System for Endless-Rope Continuous Winch

2013 ◽  
Vol 380-384 ◽  
pp. 1023-1028
Author(s):  
Xiao Teng Zeng
Keyword(s):  
Wireless Communication ◽  
Monitoring System ◽  
Communication Technology ◽  
Data Transmission ◽  
Timely Manner ◽  
Rail Vehicles ◽  
Current Transducer ◽  
And Control ◽  
Eddy Current Transducer ◽  
Made In

A set of monitoring system is designed aiming at preventing the derailment of the Rail vehicles. The system uses the eddy-current transducer to monitor whether the carriage is in orbit. Zigbee wireless communication technology is used for data transmission. PLC and host computer are used for data processing and display of the system status. Derailment alarm and control interlock will be made in a timely manner to effectively prevent the occurrence of the carriage derailment.

Design of Wireless Cage Culture Monitoring System Based on Remote Programme Update

2014 ◽  
Vol 577 ◽  
pp. 655-658
Author(s):  
Dong Dong Chen ◽  
Hai Peng Pan ◽  
Min Ming Gu ◽  
Le Wang
Keyword(s):  
Wireless Communication ◽  
Product Quality ◽  
Monitoring System ◽  
Communication Technology ◽  
Remote Monitoring ◽  
Water Environment ◽  
Cage Culture ◽  
Remote Monitoring System ◽  
Aquatic Products ◽  
The Status

Cage culture is one of the major forms of aquaculture now. For ensuring the product quality, it is necessary that the status of water environment is estimated. Aiming at the issues of high cost and the difficulty of arrangement cables, intelligent remote monitoring system based on wireless communication technology is developing, and wireless remote program update technology is brought in for adapting to different aquatic products. The system has advantage of wiring easily and networking conveniently, and has wide market prospects.

Monitoring System of Greenhouse Based on GPRS Wireless Communication Technology

2013 ◽  
Vol 364 ◽  
pp. 424-428
Author(s):  
Min Jing Liu ◽  
Xue Ren Dong ◽  
Yu Zhen Ma
Keyword(s):  
Wireless Communication ◽  
Monitoring System ◽  
Communication Technology ◽  
Agricultural Production ◽  
Agricultural Development ◽  
Environment Monitoring ◽  
Working Process ◽  
Control Terminal ◽  
And Control ◽  
Data Terminal

With the development of wireless communication technology and mechanical technology, the combination application of the two technologies to agricultural production has become the inevitable trend of agricultural development. Using Nx5883 wireless remote control terminal, a greenhouse environment monitoring system based on GPRS has been designed. It introduces the composition of hardware and working process of the system. The system can monitor the change of temperature and humidity in environment and soil, soil’s PH, and illumination timely. It transmits the signals and dates to the data terminal though wireless network, then the terminal can make the corresponding feedback. This system can real-time monitor and control the greenhouse environment.

Wireless Control for Pointolite in Light-Pen CMMs

2014 ◽  
Vol 602-605 ◽  
pp. 2217-2220 ◽  
Author(s):  
Rui Zhang ◽  
Shu Gui Liu ◽  
Huai Yu Wang
Keyword(s):  
Wireless Networks ◽  
Control System ◽  
Wireless Communication ◽  
Success Rate ◽  
Experimental Result ◽  
Error Reporting ◽  
Wireless Control ◽  
Light Pen

A wireless control system for pointolite on the light pen based on TMS320DM642 and CC2530 is introduced in this paper, in order to solve the problem that only pointolite's switch values could be controlled on the light pen in light-pen CMMs, but not lightening time values and brightness values. Through wireless networks of Zigbee, not only pointolite could be switched on or off separately, but also lightening time values and brightness values could be changed by TMS320DM642. Protocols of wired and wireless communication, multipoint answer and error reporting are also given, to improve anti-jamming capability of the system. The experimental result demonstrates that the control success rate could reach 96%, as the wireless modules of TMS320DM642 and the light pen within 8m. So the developed system has high anti-interference capability and could meet expected requirements.

Design of General Agricultural Wireless Monitoring System Based on ZigBee

2013 ◽  
Vol 380-384 ◽  
pp. 811-814
Author(s):  
Qi Guo Yao ◽  
Yu Liang Liu
Keyword(s):  
Wireless Communication ◽  
Low Power ◽  
Monitoring System ◽  
Communication Technology ◽  
Power Supply ◽  
Communication Protocol ◽  
Automatic Monitoring ◽  
Functional Modules ◽  
Wireless Monitoring ◽  
Design Concepts

The ZigBee which was adopted low-power wireless communication technology was used to design a multi-parameters monitoring system according to agricultural monitoring characteristics. Following the design concepts of generalization and modularization, the sensors and functional modules could be combined configuration, thus the system was versatility, flexible and convenient. Low-power communication protocol and solar charging technology were adopted to extend the life of power supply. This system could be widely used for automatic monitoring in facility agriculture and other agricultural places.

scholarly journals ISSUES OF CONSTRUCTION OF TELECOMMUNICATION SYSTEM OF COMMUNICATION AND TRANSFER OF DATA OF SELF-PROPELLED ARTILLERY DIVISION OF AIRBORNE FORCES

2018 ◽  
pp. 6-9
Author(s):  
A. А. Ganin ◽  
M. V. Cherevatenko ◽  
E. A. Pitikov
Keyword(s):  
Control System ◽  
Data Transmission ◽  
Relay Nodes ◽  
Telecommunication System ◽  
Special Software ◽  
Optimal Protocol ◽  
Control Automation ◽  
Minimum Number ◽  
Automation Control ◽  
Reliability Of Operation

The paper considers the list of functions to be implemented in the special software of the artillery control automation control system of the self-propelled artillery division of the airborne forces to ensure the reliability of operation. The principles implemented in the control subsystem for the control of the operation of the artillery control automation control system developed by the Rubin research and production enterprise are described. They make it possible to significantly reduce the load on network and computing resources by eliminating parallel streams of requests for duplicate data from simultaneously performed special software tasks. Solutions are proposed for automating the operation of the communication and data transmission subsystem, providing reliable data transmission, automatic selection of the communication channel having the highest throughput, automatic retransmission route construction, providing the maximum capacity with the minimum number of relay nodes during the movement of control machines and self-propelled artillery pieces. The analysis of the transport level protocols is carried out and the choice of the optimal protocol - SCTP is proved. The analysis of routing protocols is made and the choice of the optimal protocol - AODV is justified.

Top Charging Car Automatic Control System Based on PLC

2014 ◽  
Vol 552 ◽  
pp. 192-195
Author(s):  
Chuan Wei Zhang ◽  
Guang Fan Hu ◽  
Xiang Chao Qu ◽  
Li Ping Zhang
Keyword(s):  
Control System ◽  
Wireless Communication ◽  
Communication Technology ◽  
High Reliability ◽  
Labor Intensity ◽  
Control Technology ◽  
Level Of Automation ◽  
Plc Control ◽  
Detection Technology ◽  
Stable Performance

In view of the furnace top charging car ore bin automatic distributing problems, This article puts forward a kind of high reliability, stable performance of automatic material distributing control system ,The system uses wireless communication technology、Ore bin material level detection technology and High reliability of PLC control technology, Achieving material distributing car accords to the need of ore bin for charging, Making material distributing more rational and effective, reduce labor intensity and improve the level of automation for production.`

Sign in / Sign up

Export Citation Format

Share Document