scholarly journals Research on Channel Optimization of Ads-B Aviation Target Surveillance Radar Based on Improved Filtering Algorithm

Complexity ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Xiaoxia Zheng ◽  
Bin Tang ◽  
Hongping Pu
Keyword(s):  
Kalman Filter ◽  
System Performance ◽  
Positive Definite ◽  
Mean Square ◽  
Filtering Algorithm ◽  
The Matrix ◽  
One Step ◽  
Adaptive Adjustment ◽  
The One ◽  
Filter Divergence

In order to improve the surveillance effect of the aviation target surveillance radar, this paper improves the traditional filtering algorithm and builds the channel optimization system of the ADS-B aviation target surveillance radar based on the improved filtering algorithm. Moreover, this paper uses algorithm improvement to ensure the positive definite or semipositive definiteness of the state covariance and uses the root mean square volume Kalman filter to avoid the filter divergence or tracking interruption caused by the nonpositive definiteness of the matrix; the filtering principle of the interactive multimodel is to use multiple filters for parallel processing and achieve the adaptive adjustment algorithm residual error by adjusting the one-step prediction covariance in the adjustment algorithm. In addition, this paper combines the actual needs to construct a system functional structure to optimize the channel of the ADS-B aviation target surveillance radar and uses software engineering methods to model and analyze the requirements. Finally, this paper designs experiments to verify system performance. The research results show that the performance of the system constructed in this paper meets actual needs.

scholarly journals Adaptation of the mathematical apparatus of the Markov chain theory for the probabilistic analysis of recurrent estimation of image inter-frame geometric deformations

2019 ◽  
pp. 103-108
Author(s):  
G L Safina ◽  
A G Tashlinskii ◽  
M G Tsaryov
Keyword(s):  
Transition Probabilities ◽  
A Priori ◽  
Recurrent Algorithm ◽  
Image Deformation ◽  
Estimated Parameters ◽  
Markov Chain Theory ◽  
The Matrix ◽  
One Step ◽  
The One ◽  
Inter Frame

The paper is devoted to the analysis of the possibilities of using Markov chains for analyzing the accuracy of stochastic gradient relay estimation of image geometric deformations. One of the ways to reduce computational costs is to discretize the domain of studied parameters. This approach allows to choose the dimension of transition probabilities matrix a priori. However, such a matrix has a rather complicated structure. It does not significantly reduce the number of computations. A modification of the transition probabilities matrix is proposed, it’s dimension does not depend on the dimension of estimated parameters vector. In this case, the obtained relations determine a recurrent algorithm for calculating the matrix at the estimation iterations. For the one-step transitions matrix, the calculated expressions for the probabilities of image deformation parameters estimates drift are given.

Preparation of Electron Transparent Metal-Matrix Composites

1968 ◽  
Vol 26 ◽  
pp. 334-335 ◽  
Author(s):  
M. R. Pinnel ◽  
A. Lawley
Keyword(s):  
Stainless Steel ◽  
Load Transfer ◽  
Volume Fraction ◽  
Steel Wire ◽  
Initial Step ◽  
Interfacial Region ◽  
Matrix Composites ◽  
Specific Test ◽  
The Matrix ◽  
The One

Numerous phenomenological descriptions of the mechanical behavior of composite materials have been developed. There is now an urgent need to study and interpret deformation behavior, load transfer, and strain distribution, in terms of micromechanisms at the atomic level. One approach is to characterize dislocation substructure resulting from specific test conditions by the various techniques of transmission electron microscopy. The present paper describes a technique for the preparation of electron transparent composites of aluminum-stainless steel, such that examination of the matrix-fiber (wire), or interfacial region is possible. Dislocation substructures are currently under examination following tensile, compressive, and creep loading. The technique complements and extends the one other study in this area by Hancock.The composite examined was hot-pressed (argon atmosphere) 99.99% aluminum reinforced with 15% volume fraction stainless steel wire (0.006″ dia.).Foils were prepared so that the stainless steel wires run longitudinally in the plane of the specimen i.e. the electron beam is perpendicular to the axes of the wires. The initial step involves cutting slices ∼0.040″ in thickness on a diamond slitting wheel.

A Study on the Rearrangement of Dialkyl 1-Aryl-1-hydroxymethylphosphonates to Benzyl Phosphates

2020 ◽  
Vol 24 (4) ◽  
pp. 465-471 ◽  
Author(s):  
Zita Rádai ◽  
Réka Szabó ◽  
Áron Szigetvári ◽  
Nóra Zsuzsa Kiss ◽  
Zoltán Mucsi ◽  
...  
Keyword(s):  
Quantum Chemical ◽  
Room Temperature ◽  
Phase Transfer ◽  
One Pot ◽  
Substrate Dependence ◽  
Triethylbenzylammonium Chloride ◽  
One Step ◽  
The Pudovik Reaction ◽  
The One ◽  
Solid Liquid

The phospha-Brook rearrangement of dialkyl 1-aryl-1-hydroxymethylphosphonates (HPs) to the corresponding benzyl phosphates (BPs) has been elaborated under solid-liquid phase transfer catalytic conditions. The best procedure involved the use of triethylbenzylammonium chloride as the catalyst and Cs2CO3 as the base in acetonitrile as the solvent at room temperature. The substrate dependence of the rearrangement has been studied, and the mechanism of the transformation under discussion was explored by quantum chemical calculations. The key intermediate is an oxaphosphirane. The one-pot version starting with the Pudovik reaction has also been developed. The conditions of this tandem transformation were the same, as those for the one-step HP→BP conversion.

scholarly journals One-Year Clinical Evaluation of the Bonding Effectiveness of a One-Step, Self-Etch Adhesive in Noncarious Cervical Lesion Therapy

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Babacar Faye ◽  
Mouhamed Sarr ◽  
Khaly Bane ◽  
Adjaratou Wakha Aidara ◽  
Seydina Ousmane Niang ◽  
...  
Keyword(s):  
Clinical Performance ◽  
Retention Rate ◽  
Recall Rate ◽  
Acid Etching ◽  
Significant Difference ◽  
Usphs Criteria ◽  
One Step ◽  
One Year ◽  
The One ◽  
Self Etch

This study evaluated the one-year clinical performance of a one-step, self-etch adhesive (Optibond All-in-One, Kerr, CA, USA) combined with a composite (Herculite XRV Ultra, Kerr Hawe, CA, USA) to restore NCCLs with or without prior acid etching. Restorations performed by the same practitioner were evaluated at baseline and after 3, 6, and 12 months using modified USPHS criteria. At 6 months, the recall rate was 100%. The retention rate was 84.2% for restorations with prior acid etching, but statistically significant differences were observed between baseline and 6 months. Without acid etching, the retention rate was 77%, and no statistically significant difference was noted between 3 and 6 months. Marginal integrity (93.7% with and 87.7% without acid etching) and discoloration (95.3% with and 92.9% without acid etching) were scored as Alpha or Bravo, with better results after acid etching. After one year, the recall rate was 58.06%. Loss of pulp vitality, postoperative sensitivity, or secondary caries were not observed. After one year retention rate was of 90.6% and 76.9% with and without acid conditioning. Optibond All-in-One performs at a satisfactory clinical performance level for restoration of NCCLs after 12 months especially after acid etching.

scholarly journals Building up cyclodextrins from scratch – templated enzymatic synthesis of cyclodextrins directly from maltose

2021 ◽  
Author(s):  
Dennis Larsen ◽  
Sophie R. Beeren
Keyword(s):  
Enzymatic Synthesis ◽  
Combinatorial Libraries ◽  
One Step ◽  
The One ◽  
Kinetic Trapping

Template-induced kinetic trapping of specific cyclodextrins in enzyme-mediated dynamic combinatorial libraries of linear and cyclic α-glucans enables the one-step synthesis of cyclodextrins from maltose in water.

scholarly journals Efficient Cryopreservation of Populus tremula by In Vitro-Grown Axillary Buds and Genetic Stability of Recovered Plants

Plants ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 77
Author(s):  
Elena O. Vidyagina ◽  
Nikolay N. Kharchenko ◽  
Konstantin A. Shestibratov
Keyword(s):  
Survival Rate ◽  
Axillary Buds ◽  
Long Term Storage ◽  
Average Survival ◽  
Transgenic Lines ◽  
Ssr Loci ◽  
One Step ◽  
The One

Axillary buds of in vitro microshoots were successfully frozen at –196 °C by the one-step freezing method using the protective vitrification solution 2 (PVS2). Microshoots were taken from 11 transgenic lines and three wild type lines. Influence of different explant pretreatments were analyzed from the point of their influence towards recovery after cryopreservation. It was found out that the use of axillary buds as explants after removal of the apical one increases recovery on average by 8%. The cultivation on growth medium of higher density insignificantly raises the regenerants survival rate. Pretreatment of the osmotic fluid (OF) shows the greatest influence on the survival rate. It leads to the increase in survival rate by 20%. The cryopreservation technology providing regenerants average survival rate of 83% was developed. It was based on the experimental results obtained with explant pretreatment. Incubation time in liquid nitrogen did not affect the explants survival rate after thawing. After six months cryostorage of samples their genetic variability was analyzed. Six variable simple sequence repeat (SSR) loci were used to analyze genotype variability after the freezing-thawing procedure. The microsatellite analysis showed the genetic status identity of plants after cryopreservation and of the original genotypes. The presence of the recombinant gene in the transgenic lines after cryostorage were confirmed so as the interclonal variation in the growth rate under greenhouse conditions. The developed technique is recommended for long-term storage of various breeding and genetically modified lines of aspen plants, as it provides a high percentage of explants survival with no changes in genotype.

scholarly journals Study on the Leakage and Inter-Stage Pressure Drop Characteristics of Two-Stage Finger Seal

2021 ◽  
Vol 11 (5) ◽  
pp. 2239
Author(s):  
Hailin Zhao ◽  
Hua Su ◽  
Guoding Chen ◽  
Yanchao Zhang
Keyword(s):  
Pressure Drop ◽  
Pressure Difference ◽  
Radial Displacement ◽  
Mean Square ◽  
The Finite Element Method ◽  
Axial Pressure ◽  
Two Stage ◽  
One Stage ◽  
The One ◽  
Lower Contact

To solve the high leakage and high wear problems faced by sealing devices in aeroengines under the condition of high axial pressure difference, the two-stage finger seal is proposed in this paper. The finite element method and computational fluid dynamics (FEM/CFD) coupling iterative algorithm of the two-stage finger seal is developed and validated. Then the performance advantages of two-stage finger seal compared to the one-stage finger seal are studied, as well as the leakage and the inter-stage pressure drop characteristics of two-stage finger seal are investigated. Finally, the measure to improve the inter-stage imbalance of pressure drop of two-stage finger seal is proposed. The results show that the two-stage finger seal has lower leakage and lower contact pressure than the one-stage finger seal at high axial pressure difference, but there exists an inter-stage imbalance of pressure drop. Increasing the axial pressure difference and the root mean square (RMS) roughness of finger element can aggravate the imbalance of pressure drop, while the radial displacement excitation of rotor has little influence on it. The results also indicate that the inter-stage imbalance of pressure drop of the two-stage finger seal can be improved by increasing the number of finger elements of the 1st finger seal and decreasing the number of finger elements of the 2nd finger seal.

Sign in / Sign up

Export Citation Format

Share Document