scholarly journals Study on Interface Microstructure and Bonding Properties of Hot-Rolled Nickel-Based Composite Plate

2022 ◽  
Vol 2022 ◽  
pp. 1-8
Author(s):  
Yunzan Ma ◽  
Weijiang Yang ◽  
Qi Liu ◽  
Kejia Liu ◽  
Kun Chen
Keyword(s):  
Carbon Steel ◽  
Bonding Strength ◽  
Composite Plate ◽  
Interface Microstructure ◽  
Plate Interface ◽  
Bonding Properties ◽  
Steel Composite ◽  
Nickel Based Alloy ◽  
Alloy Carbon ◽  
Interface Bonding Strength

In this paper, the interface microstructure, elements’ diffusion features at the interface, and bonding properties in nickel-based alloy/carbon steel clad composite prepared by vacuum hot-roll bonding were investigated, comprehensively. The influence of element distribution on the interface bonding strength was revealed as well. The results showed that there was a 13 μm thick diffusion layer at the interface of nickel-based alloy/carbon steel composite plate, which was beneficial to a strong bond between nickel-based alloy and carbon steel, as well as the stable transition of mechanical properties in the thickness direction. Kirkendall voids and fine-grained structure (the grain size is about 41.5 nm) were observable by peeling off the nickel-based alloy cladding, which greatly promoted element diffusion and enhanced the interfacial bonding strength of the nickel-based alloy/carbon steel composite plate. The diffusion coefficient of Ni at the interface was about 2 orders of magnitude larger than that of nanocrystalline Fe. The shear strength reached up to 453 MPa, which was much higher than the minimum of 140 MPa defined in ASTM A-264 specifications. Furthermore, in the shear test, the fracture occurred on the X52 carbon steel side at the contact rather than at the composite plate interface.

Effects of Aging Treatment on Performance of Explosive Welded Beryllium-Bronze/Carbon-Steel Composite Plate

2011 ◽  
Vol 117-119 ◽  
pp. 862-865 ◽  
Author(s):  
Guo Shang Zhang ◽  
Shu Zeng Hou ◽  
Shi Zhong Wei ◽  
Ji Wen Li ◽  
Liu Jie Xu
Keyword(s):  
Shear Strength ◽  
Carbon Steel ◽  
Bond Strength ◽  
Composite Plate ◽  
Treatment Process ◽  
Aging Treatment ◽  
Beryllium Bronze ◽  
Cold Bending ◽  
Steel Composite ◽  
Effects Of Aging

This paper dealt with how the aging time and temperature affected the hardness of beryllium bronze layer in the explosive welded beryllium-bronze/carbon-steel composite plate. The properties of shearing, bonding, cold bending and microhardness were studied in term of the composite plate, including the aging and nonaging. The optimum aging treatment process of the composite plate is aging temperature at 320°C for 3 hours. And the results show that: aging treatment has no obvious effects on the shear strength but sharply decreases bond strength of the composite plate. And aging treatment to a certain extent reduce the cold bending prroperty. After aging treatment, the microhardness value and distribution of carbon steel was no obvious change, and the microhardness of beryllium bronze sharply raised and smoothly distributed.

Study on Fabrication and Bonding Interface of Explosive Welded Steel/Aluminum/Steel Composite Plate

2017 ◽  
Vol 753 ◽  
pp. 188-193
Author(s):  
Nan Zhou ◽  
Jing Jiang ◽  
Kui Tang ◽  
Song Ze Tang
Keyword(s):  
Vickers Hardness ◽  
Bonding Strength ◽  
Composite Plate ◽  
Explosive Welding ◽  
Composite Plates ◽  
Bonding Interface ◽  
Dissimilar Metal ◽  
Metal Plates ◽  
Steel Composite ◽  
Layer Steel

In order to study the explosive welding experimental fabrication technology of multi-layer dissimilar metal plates and the quality of bonding interface, three-layer steel/aluminum/steel composite plates with different thickness distributions were fabricated using the method of explosive welding when their total thicknesses remained same (total 5 mm). Then the stereomicroscope was adopted to investigate the shape of bonding interface and the formed mechanism was also analyzed. In addition, the micro-hardness (Vickers hardness, Hv) distribution of the composite plate in the thickness direction was studied by a low load Vickers hardness tester. The results show that the method of explosive welding can be used to fabricate three-layer steel/aluminum/steel dissimilar metal plates successfully. Meanwhile, wave bonding interface was formed between steel fly plate and aluminum middle plate, straight bonding interface was formed between aluminum middle plate and steel base plate. The maximum Hv value of welded plate appears at the bonding interface with high bonding strength. The bonding strength of both two kinds of welded interface was considered sufficient, which offers experimental support for the explosive welding of multi-layer plates.

scholarly journals Interface Microstructure Investigation of Babbitt-Carbon Steel Composite Using Flux with Glycerol and Petroleum Jelly Additives

2018 ◽  
Vol 8 (3) ◽  
pp. 3028-3031
Author(s):  
N. Fathy
Keyword(s):  
Carbon Steel ◽  
Physical Properties ◽  
Layer Thickness ◽  
Interface Layer ◽  
Steel Shell ◽  
Petroleum Jelly ◽  
Interface Microstructure ◽  
Area Increase ◽  
Steel Composite

The influence of adding glycerol and petroleum jelly during the tinning process of steel shell base of Babbitt-steel bimetal is studied in this paper. The morphology of interface layer is changed from a discontinuous layer in case of using flux+tin to a continuous one by adding glycerol or petroleum jelly to the flux+tin mixture. Also, the nterface layer thickness and the unbonded interface layer area increase by adding glycerol or petroleum jelly to flux+tin mixture due to their physical properties.

VALLOUREC VM 85 13Cr

Alloy Digest ◽  
2016 ◽  
Vol 65 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Carbon ◽  
Sour Service ◽  
Minimum Yield

Abstract Vallourec VM 85 13Cr (minimum yield strength 85 ksi, or 586 MPa) is a low alloy carbon steel for use in oil country tubular goods as a material suitable for sour service. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming. Filing Code: CS-198. Producer or source: Vallourec USA Corporation.

VALLOUREC VM 90 13CR

Alloy Digest ◽  
2016 ◽  
Vol 65 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Carbon ◽  
Sour Service ◽  
Minimum Yield

Abstract Vallourec VM 90 13CR (minimum yield strength 90 ksi, or 620 MPa) is a low alloy carbon steel for use in oil country tubular goods as a material suitable for sour service. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming. Filing Code: CS-197. Producer or source: Vallourec USA Corporation.

Design of Electric Control System of Stainless Steel Composite Plate

2013 ◽  
Vol 706-708 ◽  
pp. 716-719
Author(s):  
Jian Chu ◽  
Gang Wang
Keyword(s):  
Stainless Steel ◽  
Control System ◽  
Composite Plate ◽  
Current Control ◽  
Equipment Operation ◽  
Electric Control ◽  
Control Scheme ◽  
Steel Composite ◽  
Machine Interface ◽  
Electrical Components

This paper mainly introduced to the PLC as the core of stainless steel composite plate electric control part of the design. The system uses the converter +PLC+ man-machine interface, as the major part of roll welding machine control, because of the use of the PLC, so that the system can improve the automatic level, electrical components is reduced, reduce failure rate, improve the reliability of equipment operation. Based on the current control and speed control, so that the welding quality and welding speed has been greatly improved. In the article, mainly from the production process, and the control system hardware and software design, and the control scheme to introduce several aspects.

Sign in / Sign up

Export Citation Format

Share Document