scholarly journals Features detection based blind handover using kullback leibler distance for 5G HetNets systems

Author(s):  
Adnane El Hanjri ◽  
Aawatif Hayar ◽  
Abdelkrim Haqiq

<p>The Fifth Generation of Mobile Networks (5G) is changing the cellular network infrastructure paradigm, and Small Cells are a key piece of this shift. But the high number of Small Cells and their low coverage involve more Handovers to provide continuous connectivity, and the selection, quickly and at low energy cost, of the appropriate one in the vicinity of thousands is also a key problem. In this paper, we propose a new method, to have an efficient, blind and rapid handover just by analysing Received Signal probability density function instead of demodulating and analysing Received Signal itself as in classical handover. The proposed method exploits KL Distance, Akaike Information Criterion (AIC) and Akaike weights, in order to decide blindly the best handover and the best Base Station (BS) for each user</p>

Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 732
Author(s):  
Avner Elgam ◽  
Yael Balal ◽  
Yosef Pinhasi

Many communication systems are based on the Multiple Input, Multiple Output (MIMO) scheme, and Orthogonal Space–time Block Transmit diversity Coding (OSTBC), combined with Maximal Ratio Receive Combining (MRRC), to create an optimal diversity system. A system with optimal diversity fixes and optimizes the channel’s effects under multi-path and Rayleigh fading with maximum energy efficiency; however, the challenge does not end with dealing with the channel destruction of the multi-path impacts. Susceptibility to interference is a significant vulnerability in future wireless mobile networks. The 5th Generation New Radio (5G-NR) technologies bring hundreds of small cells and pieces of User Equipment (UE) per indoor or outdoor local area scenario under a specific Long Term Evolution (LTE)-based station (e-NodeB), or under 5G-NR base-station (g-NodeB). It is necessary to study issues that deal with many interference signals, and smart jammers from advanced communication equipment cause deterioration in the links between the UE, the small cells, and the NodeB. In this paper, we study and present the significant impact and performances of 2×2 Alamouti Phase-Shift Keying (PSK) modulation techniques in the presence of an interferer and a smart jammer. The destructive effects affecting the MIMO array and the advanced diversity technique without closed-loop MIMO are analyzed. The performance is evaluated in terms of Bit Error Rate (BER) vs. Signal to Interference Ratio (SIR). In addition, we proved the impairment of the orthogonal spectrum assumption mathematically.


2021 ◽  
Author(s):  
Mobasshir Mahbub ◽  
Bobby Barua

Abstract Advancements of cellular networks such as 4G and 5G proposed the collaboration of small-cell technologies in mobile networks and constructed a heterogeneous network (HetNet) for collaborative connectivity. There are many benefits of small-cell-based collective communication such as the increase of device capability in indoor/outdoor locations, enhancement of wireless coverage, improved signal efficiency, lower implementation costs of gNB (Next-generation Base Station introduced in 5G), etc. The integration of small-cells by deploying low-power BSs (base stations) in conventional macro-gNBs was investigated as a convenient and economical way of raising the potentials of a cellular network with high demand from consumers. The fusion of small-cells with macro-cells offers increased coverage and capacity for heterogeneous networks. Therefore, the research aimed to realize the performance of a small-cell deployed under a macro-cell in a two-tier heterogeneous network. The research first modified the reference equation for measuring the received power by introducing the transmitter and receiver gain. The paper then measured the SINR, throughput, spectral efficiency, and power efficiency for both downlink and uplink by empirical simulation. The research further enlisted the notable outcomes after examining the simulation results and discussed some relevant research scopes in the concluding sections of the paper.


Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 5202
Author(s):  
Wasan Kadhim Saad ◽  
Ibraheem Shayea ◽  
Bashar J. Hamza ◽  
Hafizal Mohamad ◽  
Yousef Ibrahim Daradkeh ◽  
...  

The massive growth of mobile users will spread to significant numbers of small cells for the Fifth Generation (5G) mobile network, which will overlap the fourth generation (4G) network. A tremendous increase in handover (HO) scenarios and HO rates will occur. Ensuring stable and reliable connection through the mobility of user equipment (UE) will become a major problem in future mobile networks. This problem will be magnified with the use of suboptimal handover control parameter (HCP) settings, which can be configured manually or automatically. Therefore, the aim of this study is to investigate the impact of different HCP settings on the performance of 5G network. Several system scenarios are proposed and investigated based on different HCP settings and mobile speed scenarios. The different mobile speeds are expected to demonstrate the influence of many proposed system scenarios on 5G network execution. We conducted simulations utilizing MATLAB software and its related tools. Evaluation comparisons were performed in terms of handover probability (HOP), ping-pong handover probability (PPHP) and outage probability (OP). The 5G network framework has been employed to evaluate the proposed system scenarios used. The simulation results reveal that there is a trade-off in the results obtained from various systems. The use of lower HCP settings provides noticeable enhancements compared to higher HCP settings in terms of OP. Simultaneously, the use of lower HCP settings provides noticeable drawbacks compared to higher HCP settings in terms of high PPHP for all scenarios of mobile speed. The simulation results show that medium HCP settings may be the acceptable solution if one of these systems is applied. This study emphasises the application of automatic self-optimisation (ASO) functions as the best solution that considers user experience.


Author(s):  
Dr. Abul Bashar

Artificial intelligence based long term evolution multi in multi output antenna supporting the fifth generation mobile networks is put forth in the paper. The mechanism laid out in paper is devised using the monopole-antenna integrated with the switchable pattern. The long term evolution based multiple input and multiple output antenna is equipped with four antennas and capable of providing a four concurrent data streams quadrupling the theoretical maximum speed of data transfer allowing the base station to convey four diverse signals through four diverse transmit antennas for a single user equipment. The utilization of the long term evolution multiple input multiple output is capable of utilizing the multi-trial broadcasting to offer betterments in the signal performance as well as throughput and spectral efficiency when used along the fifth generation mobile networks. So the paper proposes the artificial intelligence based long term evolution multiple input multiple output four transmit antenna with four diverse signal transmission capacity that is operating in the frequency of 3.501 Gigahertz frequency. The laid out design is evaluated using the Multi-input Multi output signal analyzer to acquire the capacity of the passive conveyance of the various antennas with the diverse combination of patterns. The outcomes observed enables the artificial intelligence antenna to identify the choicest antenna to be integrated in the diverse environments for improving the throughput, signal performance and the data conveyance speed.


2021 ◽  
Author(s):  
Deniss Brodņevs

The Thesis is concerned with assessing the suitability of LTE (4G) cellular networks for the remote control of low-flying UAVs. To solve this problem, an approach to the analysis of the delay values in cellular networks has been developed, which makes it possible to estimate the delays of individual cells and overall cellular network. Requirements for delays in the UAV control channel were developed, conclusions were drawn about the suitability of the LTE network as a communication solution for the UAV remote control. A method for calculating the effect of parallel redundancy is proposed, and an experimental assessment of the possibility of using two existing solutions for parallel redundancy in LTE networks is carried out. In addition, a compact technical solution for analyzing the level of base station signals was demonstrated.


Telecom IT ◽  
2020 ◽  
Vol 8 (2) ◽  
pp. 44-54
Author(s):  
A. Grebenshchikova ◽  
Elagin V.

The paper considers the data traffic based on slicing in a 5g mobile network uplink system. Slicing is a promising technology for the fifth generation of networks that provides optimal quality of QOS services for each specific user or group of users. Data traffic that is processed by cellular networks increases every year. Therefore, we should consider all set of traffic from VoIP to M2M devices. For example, smart devices in the healthcare system transmit big data that is sensitive to latency, but also a video stream that requires minimal latency in certain cases. The paper focuses on the successful processing of traffic through a relay node, donor microstates, and a base station. All traffic is divided into three levels of QoS segmentation: sensitive, less sensitive, and low-sensitivity, using the AnyLogic simulation program. For fifth-generation 5G networks, achieving minimum latency and maximum data transfer speed within QoS is an important implementation condition. Therefore, in this paper, using simulation modeling, the main and possible results of each segment in the new generation of mobile networks are obtained. The use of a relay node in conjunction with micro-stations can ensure optimal station load and successful data processing. Also, the solutions outlined in this paper will allow you to identify a number of areas for future research to assess possible ways to design new mobile networks, or improve existing ones.


2018 ◽  
Vol 13 (2) ◽  
pp. 192-204 ◽  
Author(s):  
Shangjing Lin ◽  
Jianguo Yu ◽  
Wei Ni ◽  
RenPing Liu

Fifth generation mobile networks (5G) will be featured by miniaturised cells and massive dense deployment. Traditional centralised network control cannot adapt to high signalling delay, and is therefore not scalable for future 5G networks.To address this issue, we adopt the software-defined networking (SDN) approach of decoupled network control and data transmission. In particular, delay-sensitive interference suppression for data transmission is decoupled from delay-tolerant topology control and base station coordination. This substantially alleviates the requirement of network control on delay and complexity, hence simplifying 5G control plane design, reducing signalling overhead, and enhancing network scalability. Case studies show that our decoupled network control is effective for timely interference mitigation and reliable topology management. The stability and scalability of our approach are also demonstrated.


Author(s):  
Weston Mwashita ◽  
Marcel Ohanga Odhiambo

This research work presents a power control mechanism developed for ProSe-enabled sensors so that the sensors can be smoothly integrated into the fifth generation (5G) of mobile networks. It is strongly anticipated that 5G networks will provide an enabling environment for the 21st century innovations like the internet of things (IoT). Sensors are pivotal in IoT. The proposed power control mechanism involves an open loop power control (OLPC) mechanism that a ProSe-enabled sensor has to use to establish communication with a base station (BS) and a closed loop power control (CLPC) the BS then has use to establish transmit power levels for devices to be involved in a device to device (D2D) communication depending on the prevailing channel conditions. The results obtained demonstrate that the developed scheme does not adversely affect the quality of service (QoS) of a 5G mobile network.


Author(s):  
Mohammed H. Alsharif ◽  
Khalid Yahya ◽  
Shehzad Ashraf Chaudhry

This paper evaluates the impact of multi-5G small cell systems on the energy efficiency (EE) in a Fifth Generation (5G) of cellular networks. Both the proposed model and the analysis of the EE in this study take into account (i) the path losses, fading, and shadowing that affect the received signal at the user equipment (UE) within the same cell, and (ii) the interference effects of adjacent cells. In addition, the concepts of new technologies such as large MIMO in millimeter range communication have also been considered. The simulation results show that the interference from adjacent cells can degrade the EE of a multi-cell cellular network. With the high interference the number of bits that will be transferred per joule of energy is 1.29 Mb/J with a 0.25 GHz bandwidth and 16 transmit antennas. While, with a 1 GHz bandwidth the transfer rate increases to 5.17 Mb/J. Whereas, with 64 transmit antennas the EE improved to 5.17 Mb/J with a 0.25 GHz BW and 20.70 Mb/J with a 1 GHz BW. These results provide insight into the impact of the number of antennas in millimeter range communication and the interference from adjacent cells on achieving real gains in the EE of multi-5G small cells cellular network.


Sign in / Sign up

Export Citation Format

Share Document