scholarly journals New Results on the Thermodynamic Properties of the Climate System

2011 ◽  
Vol 68 (10) ◽  
pp. 2438-2458 ◽  
Author(s):  
Valerio Lucarini ◽  
Klaus Fraedrich ◽  
Francesco Ragone
Keyword(s):  
Heat Flux ◽  
Thermodynamic Properties ◽  
Entropy Production ◽  
Lower Bounds ◽  
Large Scale ◽  
Numerical Models ◽  
Climate System ◽  
Thermodynamic Quantities ◽  
Energy Cycle ◽  
Lorenz Energy Cycle

Abstract In this paper the authors exploit two equivalent formulations of the average rate of material entropy production in the climate system to propose an approximate splitting between contributions due to vertical and eminently horizontal processes. This approach is based only on 2D radiative fields at the surface and at the top of atmosphere. Using 2D fields at the top of atmosphere alone, lower bounds to the rate of material entropy production and to the intensity of the Lorenz energy cycle are derived. By introducing a measure of the efficiency of the planetary system with respect to horizontal thermodynamic processes, it is possible to gain insight into a previous intuition on the possibility of defining a baroclinic heat engine extracting work from the meridional heat flux. The approximate formula of the material entropy production is verified and used for studying the global thermodynamic properties of climate models (CMs) included in the Program for Climate Model Diagnosis and Intercomparison (PCMDI)/phase 3 of the Coupled Model Intercomparison Project (CMIP3) dataset in preindustrial climate conditions. It is found that about 90% of the material entropy production is due to vertical processes such as convection, whereas the large-scale meridional heat transport contributes to only about 10% of the total. This suggests that the traditional two-box models used for providing a minimal representation of entropy production in planetary systems are not appropriate, whereas a basic—but conceptually correct—description can be framed in terms of a four-box model. The total material entropy production is typically 55 mW m−2 K−1, with discrepancies on the order of 5%, and CMs’ baroclinic efficiencies are clustered around 0.055. The lower bounds on the intensity of the Lorenz energy cycle featured by CMs are found to be around 1.0–1.5 W m−2, which implies that the derived inequality is rather stringent. When looking at the variability and covariability of the considered thermodynamic quantities, the agreement among CMs is worse, suggesting that the description of feedbacks is more uncertain. The contributions to material entropy production from vertical and horizontal processes are positively correlated, so that no compensation mechanism seems in place. Quite consistently among CMs, the variability of the efficiency of the system is a better proxy for variability of the entropy production due to horizontal processes than that of the large-scale heat flux. The possibility of providing constraints on the 3D dynamics of the fluid envelope based only on 2D observations of radiative fluxes seems promising for the observational study of planets and for testing numerical models.

scholarly journals TheDiaTo (v1.0) – A new diagnostic tool for water, energy and entropy budgets in climate models

2019 ◽  
Author(s):  
Valerio Lembo ◽  
Frank Lunkeit ◽  
Valerio Lucarini
Keyword(s):  
Entropy Production ◽  
Energy Budget ◽  
Diagnostic Tool ◽  
Hydrological Cycle ◽  
Heat Fluxes ◽  
Climate System ◽  
Irreversible Processes ◽  
Energy Budgets ◽  
Energy Cycle ◽  
Lorenz Energy Cycle

Abstract. This work presents Thermodynamic Diagnostic Tool (TheDiaTo), a novel diagnostic tool for studying the thermodynamics of the climate systems with a wide range of applications, from sensitivity studies to model tuning. It includes a number of modules for assessing the internal energy budget, the hydrological cycle, the Lorenz Energy Cycle and the material entropy production, respectively. The routine receives as inputs energy fluxes at surface and at the Top-of-Atmosphere (TOA), for the computation of energy budgets at Top-of-Atmosphere (TOA), at the surface, and in the atmosphere as a residual. Meridional enthalpy transports are also computed from the divergence of the zonal mean energy budget fluxes; location and intensity of peaks in the two hemispheres are then provided as outputs. Rainfall, snowfall and latent heat fluxes are received as inputs for computing the water mass and latent energy budgets. If a land-sea mask is provided, the required quantities are separately computed over continents and oceans. The diagnostic tool also computes the Lorenz Energy Cycle (LEC) and its storage/conversion terms as annual mean global and hemispheric values. In order to achieve this, one needs to provide as input three-dimensional daily fields of horizontal wind velocity and temperature in the troposphere. Two methods have been implemented for the computation of the material entropy production, one relying on the convergence of radiative heat fluxes in the atmosphere (indirect method), one combining the irreversible processes occurring in the climate system, particularly heat fluxes in the boundary layer, the hydrological cycle and the kinetic energy dissipation as retrieved from the residuals of the LEC. A version of these diagnostics has been developed as part of the Earth System Model eValuation Tool (ESMValTool) v2.0a1, in order to assess the performances of CMIP6 model simulations, and will be available in the next release of the tool. The aim of this software is to provide a comprehensive picture of the thermodynamics of the climate system as reproduced in the state-of-the-art coupled general circulation models. This can prove useful for better understanding anthropogenic and natural climate change, paleoclimatic climate variability, and climatic tipping points.

scholarly journals TheDiaTo (v1.0) – a new diagnostic tool for water, energy and entropy budgets in climate models

2019 ◽  
Vol 12 (8) ◽  
pp. 3805-3834 ◽  
Author(s):  
Valerio Lembo ◽  
Frank Lunkeit ◽  
Valerio Lucarini
Keyword(s):  
Entropy Production ◽  
Energy Budget ◽  
Diagnostic Tool ◽  
Hydrological Cycle ◽  
Heat Fluxes ◽  
Climate System ◽  
Irreversible Processes ◽  
Energy Budgets ◽  
Energy Cycle ◽  
Lorenz Energy Cycle

Abstract. This work presents the Thermodynamic Diagnostic Tool (TheDiaTo), a novel diagnostic tool for investigating the thermodynamics of climate systems with a wide range of applications, from sensitivity studies to model tuning. It includes a number of modules for assessing the internal energy budget, the hydrological cycle, the Lorenz energy cycle and the material entropy production. The routine takes as inputs energy fluxes at the surface and at the top of the atmosphere (TOA), which allows for the computation of energy budgets at the TOA, the surface and in the atmosphere as a residual. Meridional enthalpy transports are also computed from the divergence of the zonal mean energy budget from which the location and intensity of the maxima in each hemisphere are calculated. Rainfall, snowfall and latent heat fluxes are received as inputs for computation of the water mass and latent energy budgets. If a land–sea mask is provided, the required quantities are separately computed over continents and oceans. The diagnostic tool also computes the annual Lorenz energy cycle (LEC) and its storage and conversion terms by hemisphere and as a global mean. This is computed from three-dimensional daily fields of horizontal wind velocity and temperature in the troposphere. Two methods have been implemented for the computation of the material entropy production: one relying on the convergence of radiative heat fluxes in the atmosphere (indirect method) and the other combining the irreversible processes occurring in the climate system, particularly heat fluxes in the boundary layer, the hydrological cycle and the kinetic energy dissipation as retrieved from the residuals of the LEC (direct method). A version of these diagnostics has been developed as part of the Earth System Model eValuation Tool (ESMValTool) v2.0a1 in order to assess the performances of CMIP6 model simulations, and it will be available in the next release. The aim of this software is to provide a comprehensive picture of the thermodynamics of the climate system, as reproduced in the state-of-the-art coupled general circulation models. This can prove useful for better understanding anthropogenic and natural climate change, paleoclimatic climate variability, and climatic tipping points.

scholarly journals Thermodynamics of climate change: generalized sensitivities

2010 ◽  
Vol 10 (20) ◽  
pp. 9729-9737 ◽  
Author(s):  
V. Lucarini ◽  
K. Fraedrich ◽  
F. Lunkeit
Keyword(s):  
Entropy Production ◽  
Climate Models ◽  
Climate Model ◽  
Co2 Concentration ◽  
Heat Fluxes ◽  
Predominant Role ◽  
Energy Cycle ◽  
Wide Range ◽  
Linear Behaviour ◽  
Lorenz Energy Cycle

Abstract. Using a recent theoretical approach, we study how global warming impacts the thermodynamics of the climate system by performing experiments with a simplified yet Earth-like climate model. The intensity of the Lorenz energy cycle, the Carnot efficiency, the material entropy production, and the degree of irreversibility of the system change monotonically with the CO2 concentration. Moreover, these quantities feature an approximately linear behaviour with respect to the logarithm of the CO2 concentration in a relatively wide range. These generalized sensitivities suggest that the climate becomes less efficient, more irreversible, and features higher entropy production as it becomes warmer, with changes in the latent heat fluxes playing a predominant role. These results may be of help for explaining recent findings obtained with state of the art climate models regarding how increases in CO2 concentration impact the vertical stratification of the tropical and extratropical atmosphere and the position of the storm tracks.

scholarly journals Thermodynamics of climate change: generalized sensitivities

2010 ◽  
Vol 10 (2) ◽  
pp. 3699-3715 ◽  
Author(s):  
V. Lucarini ◽  
K. Fraedrich ◽  
F. Lunkeit
Keyword(s):  
Climate Change ◽  
Global Warming ◽  
Surface Temperature ◽  
Entropy Production ◽  
Theoretical Approach ◽  
Climate Model ◽  
Co2 Concentration ◽  
Energy Cycle ◽  
Lorenz Energy Cycle ◽  
The Impact

Abstract. Using a recent theoretical approach, we study how the impact of global warming of the thermodynamics of the climate system by performing experiments with a simplified yet Earth-like climate model. In addition to the globally averaged surface temperature, the intensity of the Lorenz energy cycle, the Carnot efficiency, the material entropy production and the degree of irreversibility of the system are linear with the logarithm of the CO2 concentration. These generalized sensitivities suggest that the climate becomes less efficient, more irreversible, and features higher entropy production as it becomes warmer.

scholarly journals Vanadium Redox Flow Batteries: A Review Oriented to Fluid-Dynamic Optimization

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 176
Author(s):  
Iñigo Aramendia ◽  
Unai Fernandez-Gamiz ◽  
Adrian Martinez-San-Vicente ◽  
Ekaitz Zulueta ◽  
Jose Manuel Lopez-Guede
Keyword(s):  
Large Scale ◽  
Numerical Models ◽  
Fluid Dynamic ◽  
Renewable Energy Sources ◽  
Vanadium Redox Flow Battery ◽  
Redox Flow Batteries ◽  
Design Flexibility ◽  
Flow Batteries ◽  
Exchange Membrane ◽  
Vanadium Redox

Large-scale energy storage systems (ESS) are nowadays growing in popularity due to the increase in the energy production by renewable energy sources, which in general have a random intermittent nature. Currently, several redox flow batteries have been presented as an alternative of the classical ESS; the scalability, design flexibility and long life cycle of the vanadium redox flow battery (VRFB) have made it to stand out. In a VRFB cell, which consists of two electrodes and an ion exchange membrane, the electrolyte flows through the electrodes where the electrochemical reactions take place. Computational Fluid Dynamics (CFD) simulations are a very powerful tool to develop feasible numerical models to enhance the performance and lifetime of VRFBs. This review aims to present and discuss the numerical models developed in this field and, particularly, to analyze different types of flow fields and patterns that can be found in the literature. The numerical studies presented in this review are a helpful tool to evaluate several key parameters important to optimize the energy systems based on redox flow technologies.

scholarly journals Process-Based Model Prediction of Coastal Dune Erosion through Parametric Calibration

2021 ◽  
Vol 9 (6) ◽  
pp. 635
Author(s):  
Hyeok Jin ◽  
Kideok Do ◽  
Sungwon Shin ◽  
Daniel Cox
Keyword(s):  
Large Scale ◽  
Numerical Models ◽  
Model Performance ◽  
Coastal Dunes ◽  
Wave Transformation ◽  
Storm Event ◽  
Face Model ◽  
Dune Erosion ◽  
Simulation Performance ◽  
Sand Bar

Coastal dunes are important morphological features for both ecosystems and coastal hazard mitigation. Because understanding and predicting dune erosion phenomena is very important, various numerical models have been developed to improve the accuracy. In the present study, a process-based model (XBeachX) was tested and calibrated to improve the accuracy of the simulation of dune erosion from a storm event by adjusting the coefficients in the model and comparing it with the large-scale experimental data. The breaker slope coefficient was calibrated to predict cross-shore wave transformation more accurately. To improve the prediction of the dune erosion profile, the coefficients related to skewness and asymmetry were adjusted. Moreover, the bermslope coefficient was calibrated to improve the simulation performance of the bermslope near the dune face. Model performance was assessed based on the model-data comparisons. The calibrated XBeachX successfully predicted wave transformation and dune erosion phenomena. In addition, the results obtained from other two similar experiments on dune erosion with the same calibrated set matched well with the observed wave and profile data. However, the prediction of underwater sand bar evolution remains a challenge.

scholarly journals The Influence of Bulb Position on Hydraulic Performance of Submersible Tubular Pump Device

2021 ◽  
Vol 9 (8) ◽  
pp. 831
Author(s):  
Zhuangzhuang Sun ◽  
Jie Yu ◽  
Fangping Tang
Keyword(s):  
Entropy Production ◽  
Large Scale ◽  
Experimental Testing ◽  
Guide Vane ◽  
Outer Wall ◽  
Hydraulic Performance ◽  
Hydraulic Loss ◽  
Optimized Design ◽  
Outlet Channel ◽  
Wall Area

In order to study the influence of the position of the bulb on the hydraulic performance of asubmersible tubular pump device, based on a large-scale pumping station, two schemes—involving a front-mounted bulb and a rear-mounted bulb, respectively—were designed. The front-mounted scheme uses the GL-2008-03 hydraulic model and its conventional guide vane, while the rearmounted scheme uses the optimized design of a diffuser vane. The method of combining numerical simulation and experimental testing was used to analyze the differences between the external and internal characteristics of the two schemes. The results show that, under the condition of reasonable diffusion guide vane design, the efficiency under the rear-mounted scheme is higher than that under the front-mounted scheme, where the highest efficiency difference is about 1%. Although the frontmounted bulb scheme reduces the hydraulic loss of the bulb section, the placement of the bulb on the water inlet side reduces the flow conditions of the impeller. Affected by the circulation of the guide vane outlet, the hydraulic loss of the outlet channel is greater than the rear-mounted scheme. The bulb plays a rectifying function when the bulb is placed behind, which greatly eliminates the annular volume of the guide vane outlet, and the water outlet channel has a smaller hydraulic loss. In the front-mounted scheme, the water flow inside the outlet channel squeezes to the outer wall, causing higher entropy production near the outer wall area. The entropy production of the rear-mounted scheme is mainly in the bulb section and the bulb support. This research can provide reference for the design and form selection of a submersible tubular pump device, which has great engineering significance.

scholarly journals Properties of Steady Geostrophic Turbulence with Isopycnal Outcropping

2012 ◽  
Vol 42 (1) ◽  
pp. 18-38 ◽  
Author(s):  
G. Roullet ◽  
J. C. McWilliams ◽  
X. Capet ◽  
M. J. Molemaker
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
Mechanical Energy ◽  
Baroclinic Instability ◽  
Three Dimensional ◽  
Primary Source ◽  
Eddy Diffusivity ◽  
Energy Cycle ◽  
Geostrophic Turbulence ◽  
Pv Gradient

Abstract High-resolution simulations of β-channel, zonal-jet, baroclinic turbulence with a three-dimensional quasigeostrophic (QG) model including surface potential vorticity (PV) are analyzed with emphasis on the competing role of interior and surface PV (associated with isopycnal outcropping). Two distinct regimes are considered: a Phillips case, where the PV gradient changes sign twice in the interior, and a Charney case, where the PV gradient changes sign in the interior and at the surface. The Phillips case is typical of the simplified turbulence test beds that have been widely used to investigate the effect of ocean eddies on ocean tracer distribution and fluxes. The Charney case shares many similarities with recent high-resolution primitive equation simulations. The main difference between the two regimes is indeed an energization of submesoscale turbulence near the surface. The energy cycle is analyzed in the (k, z) plane, where k is the horizontal wavenumber. In the two regimes, the large-scale buoyancy forcing is the primary source of mechanical energy. It sustains an energy cycle in which baroclinic instability converts more available potential energy (APE) to kinetic energy (KE) than the APE directly injected by the forcing. This is due to a conversion of KE to APE at the scale of arrest. All the KE is dissipated at the bottom at large scales, in the limit of infinite resolution and despite the submesoscales energizing in the Charney case. The eddy PV flux is largest at the scale of arrest in both cases. The eddy diffusivity is very smooth but highly nonuniform. The eddy-induced circulation acts to flatten the mean isopycnals in both cases.

Sign in / Sign up

Export Citation Format

Share Document