Fault Detection Based on Near-Infrared Spectra for the Oil Desalting Process

2018 ◽  
Vol 72 (8) ◽  
pp. 1199-1204 ◽  
Author(s):  
Xiaoli Luan ◽  
Minjun Jin ◽  
Fei Liu

The fault detection problem of the oil desalting process is investigated in this paper. Different from the traditional fault detection approaches based on measurable process variables, near-infrared (NIR) spectroscopy is applied to acquire the process fault information from the molecular vibrational signal. With the molecular spectra data, principal component analysis was explored to calculate the Hotelling T2 and squared prediction error, which act as fault indicators. Compared with the traditional fault detection approach based on measurable process variables, NIR spectra-based fault detection illustrates more sensitivity to early failure because of the fact that the changes in the molecular level can be identified earlier than the physical appearances on the process. The application results show that the detection time of the proposed method is earlier than the traditional method by about 200 min.

Food Research ◽  
2021 ◽  
Vol 5 (S2) ◽  
pp. 51-56
Author(s):  
Y.I. Aprilia ◽  
N. Khuriyati ◽  
A.C. Sukartiko

Testing the antioxidant activity of chili powder is often destructive; these methods are expensive, complicated, and lengthy analysis time. Meanwhile, information on antioxidant activity is needed by the industry to determine its quality class in rapid and uncomplicated handling. Therefore, this study was aimed to measure the antioxidant activity of chili powder and classify it into three quality classes, namely high, medium, and low, using Near Infrared (NIR) spectroscopy at spectral wavelengths of 1000-2500 nm and combined with chemometric techniques. The antioxidant activity of the sample was evaluated using the DPPH assay. Processing of the data started with outlier detection using Hotelling's T2 , then confirmed using leverage analysis and influence plot. The data were then processed with Smoothing-Savitzky Golay, SNV, and De-Trending. Principal Component Analysis (PCA) was performed for classifying the samples, which were validated with full crossvalidation. The results showed that the antioxidant activity was detected at a range of 1395 - 2390 nm. De-Trending was the best pre-treatment that successfully classified the low and high levels of antioxidant activity with a success rate of 100% and classified a medium level of antioxidant activity with a success rate of 96.97%.


2020 ◽  
Vol 13 (1) ◽  
Author(s):  
Elise A. Kho ◽  
Jill N. Fernandes ◽  
Andrew C. Kotze ◽  
Glen P. Fox ◽  
Maggy T. Sikulu-Lord ◽  
...  

Abstract Background Existing diagnostic methods for the parasitic gastrointestinal nematode, Haemonchus contortus, are time consuming and require specialised expertise, limiting their utility in the field. A practical, on-farm diagnostic tool could facilitate timely treatment decisions, thereby preventing losses in production and flock welfare. We previously demonstrated the ability of visible–near-infrared (Vis–NIR) spectroscopy to detect and quantify blood in sheep faeces with high accuracy. Here we report our investigation of whether variation in sheep type and environment affect the prediction accuracy of Vis–NIR spectroscopy in quantifying blood in faeces. Methods Visible–NIR spectra were obtained from worm-free sheep faeces collected from different environments and sheep types in South Australia (SA) and New South Wales, Australia and spiked with various sheep blood concentrations. Spectra were analysed using principal component analysis (PCA), and calibration models were built around the haemoglobin (Hb) wavelength region (387–609 nm) using partial least squares regression. Models were used to predict Hb concentrations in spiked faeces from SA and naturally infected sheep faeces from Queensland (QLD). Samples from QLD were quantified using Hemastix® test strip and FAMACHA© diagnostic test scores. Results Principal component analysis showed that location, class of sheep and pooled versus individual samples were factors affecting the Hb predictions. The models successfully differentiated ‘healthy’ SA samples from those requiring anthelmintic treatment with moderate to good prediction accuracy (sensitivity 57–94%, specificity 44–79%). The models were not predictive for blood in the naturally infected QLD samples, which may be due in part to variability of faecal background and blood chemistry between samples, or the difference in validation methods used for blood quantification. PCA of the QLD samples, however, identified a difference between samples containing high and low quantities of blood. Conclusion This study demonstrates the potential of Vis–NIR spectroscopy for estimating blood concentration in faeces from various types of sheep and environmental backgrounds. However, the calibration models developed here did not capture sufficient environmental variation to accurately predict Hb in faeces collected from environments different to those used in the calibration model. Consequently, it will be necessary to establish models that incorporate samples that are more representative of areas where H. contortus is endemic.


2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Hui Chen ◽  
Zan Lin ◽  
Chao Tan

Near-infrared (NIR) spectroscopy technique offers many potential advantages as tool for biomedical analysis since it enables the subtle biochemical signatures related to pathology to be detected and extracted. In conjunction with advanced chemometrics, NIR spectroscopy opens the possibility of their use in cancer diagnosis. The study focuses on the application of near-infrared (NIR) spectroscopy and classification models for discriminating colorectal cancer. A total of 107 surgical specimens and a corresponding NIR diffuse reflection spectral dataset were prepared. Three preprocessing methods were attempted and least-squares support vector machine (LS-SVM) was used to build a classification model. The hybrid preprocessing of first derivative and principal component analysis (PCA) resulted in the best LS-SVM model with the sensitivity and specificity of 0.96 and 0.96 for the training and 0.94 and 0.96 for test sets, respectively. The similarity performance on both subsets indicated that overfitting did not occur, assuring the robustness and reliability of the developed LS-SVM model. The area of receiver operating characteristic (ROC) curve was 0.99, demonstrating once again the high prediction power of the model. The result confirms the applicability of the combination of NIR spectroscopy, LS-SVM, PCA, and first derivative preprocessing for cancer diagnosis.


2021 ◽  
pp. 096703352098731
Author(s):  
Adenilton C da Silva ◽  
Lívia PD Ribeiro ◽  
Ruth MB Vidal ◽  
Wladiana O Matos ◽  
Gisele S Lopes

The use of alcohol-based hand sanitizers is recommended as one of several strategies to minimize contamination and spread of the COVID-19 disease. Current reports suggest that the virucidal potential of ethanol occurs at concentrations close to 70%. Traditional methods of verifying the ethanol concentration in such products invite potential errors due to the viscosity of chemical components or may be prohibitively expensive to undertake in large demand. Near infrared (NIR) spectroscopy and chemometrics have already been used for the determination of ethanol in other matrices and present an alternative fast and reliable approach to quality control of alcohol-based hand sanitizers. In this study, a portable NIR spectrometer combined with classification chemometric tools, i.e., partial least square discriminant analysis (PLS–DA) and linear discriminant analysis with successive algorithm projection (SPA–LDA) were used to construct models to identify conforming and non-conforming commercial and laboratory synthesized hand sanitizer samples. Principal component analysis (PCA) was applied in an exploratory data study. Three principal components accounted for 99% of data variance and demonstrate clustering of conforming and non-conforming samples. The PLS–DA and SPA–LDA classification models presented 77 and 100% of accuracy in cross/internal validation respectively and 100% of accuracy in the classification of test samples. A total of 43% commercial samples evaluated using the PLS–DA and SPA–LDA presented ethanol content non-conforming for hand sanitizer gel. These results indicate that use of NIR spectroscopy and chemometrics is a promising strategy, yielding a method that is fast, portable, and reliable for discrimination of alcohol-based hand sanitizers with respect to conforming and non-conforming ethanol concentrations.


Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 166
Author(s):  
Majed Aljunaid ◽  
Yang Tao ◽  
Hongbo Shi

Partial least squares (PLS) and linear regression methods are widely utilized for quality-related fault detection in industrial processes. Standard PLS decomposes the process variables into principal and residual parts. However, as the principal part still contains many components unrelated to quality, if these components were not removed it could cause many false alarms. Besides, although these components do not affect product quality, they have a great impact on process safety and information about other faults. Removing and discarding these components will lead to a reduction in the detection rate of faults, unrelated to quality. To overcome the drawbacks of Standard PLS, a novel method, MI-PLS (mutual information PLS), is proposed in this paper. The proposed MI-PLS algorithm utilizes mutual information to divide the process variables into selected and residual components, and then uses singular value decomposition (SVD) to further decompose the selected part into quality-related and quality-unrelated components, subsequently constructing quality-related monitoring statistics. To ensure that there is no information loss and that the proposed MI-PLS can be used in quality-related and quality-unrelated fault detection, a principal component analysis (PCA) model is performed on the residual component to obtain its score matrix, which is combined with the quality-unrelated part to obtain the total quality-unrelated monitoring statistics. Finally, the proposed method is applied on a numerical example and Tennessee Eastman process. The proposed MI-PLS has a lower computational load and more robust performance compared with T-PLS and PCR.


2018 ◽  
Vol 10 (4) ◽  
pp. 351
Author(s):  
João S. Panero ◽  
Henrique E. B. da Silva ◽  
Pedro S. Panero ◽  
Oscar J. Smiderle ◽  
Francisco S. Panero ◽  
...  

Near Infrared (NIR) Spectroscopy technique combined with chemometrics methods were used to group and identify samples of different soy cultivars. Spectral data, collected in the range of 714 to 2500 nm (14000 to 4000 cm-1), were obtained from whole grains of four different soybean cultivars and were submitted to different types of pre-treatments. Chemometrics algorithms were applied to extract relevant information from the spectral data, to remove the anomalous samples and to group the samples. The best results were obtained considering the spectral range from 1900.6 to 2187.7 nm (5261.4 cm-1 to 4570.9 cm-1) and with spectral treatment using Multiplicative Signal Correction (MSC) + Baseline Correct (linear fit), what made it possible to the exploratory techniques Principal Component Analysis (PCA) and Hierarchical Cluster Analysis (HCA) to separate the cultivars. Thus, the results demonstrate that NIR spectroscopy allied with de chemometrics techniques can provide a rapid, nondestructive and reliable method to distinguish different cultivars of soybeans.


1996 ◽  
Vol 50 (12) ◽  
pp. 1541-1544 ◽  
Author(s):  
Hans-René Bjørsvik

A method of combining spectroscopy and multivariate data analysis for obtaining quantitative information on how a reaction proceeds is presented. The method is an approach for the explorative synthetic organic laboratory rather than the analytical chemistry laboratory. The method implements near-infrared spectroscopy with an optical fiber transreflectance probe as instrumentation. The data analysis consists of decomposition of the spectral data, which are recorded during the course of a reaction by using principal component analysis to obtain latent variables, scores, and loading. From the scores and the corresponding reaction time, it is possible to obtain a reaction profile. This reaction profile can easily be recalculated to obtain the concentration profile over time. This calculation is based on only two quantitative measurements, which can be (1) measurement from the work-up of the reaction or (2) chromatographic analysis from two withdrawn samples during the reaction. The method is applied to the synthesis of 3-amino-propan-1,2-diol.


2009 ◽  
Vol 17 (4) ◽  
pp. 223-231 ◽  
Author(s):  
Rosario del P. Castillo ◽  
David Contreras ◽  
Matthias Otto ◽  
Jaime Baeza ◽  
Juanita Freer

Near infrared (NIR) spectroscopy was used to predict cold resistance in Eucalyptus globulus genotypes after acclimatation treatments at low temperatures. Branches of the genotypes were maintained during 31 days in three cold chambers and the NIR spectra of milled leaves were obtained. The samples were subsequently exposed to artificial freezing (with some branches exposed to −2°C) and the foliar damage was assessed by visually estimating the necrotic area of each leaf. These values were used as reference parameters to evaluate cold resistance in the genotypes. A partial least squares (PLS) method was performed using the foliar damage and the NIR spectra of leaves. Spectra were treated with multiplicative scatter correction (MSC) and orthogonal signal correction (OSC). An excellent model was achieved which predicted foliar damage in the genotypes with a low standard error of prediction (3.5%), a high regression coefficient in cross-validation and external validation ( r > 0.9) and a high percentage of the variance explained by the spectra (95.4%). Furthermore, a pattern recognition method, using a regularised discriminant analysis (RDA) of the scores matrix obtained in PLS, in a denominated PLS/RDA on scores strategy, was applied directly to the spectra to classify each genotype as tolerant or sensitive; 100% of the genotypes were correctly assigned. These results demonstrate the advantages of using the NIR spectra of leaves as a rapid, nondestructive tool to evaluate cold resistance in genotypes.


2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Sylvio Barbon ◽  
Ana Paula Ayub da Costa Barbon ◽  
Rafael Gomes Mantovani ◽  
Douglas Fernandes Barbin

Identification of chicken quality parameters is often inconsistent, time-consuming, and laborious. Near-infrared (NIR) spectroscopy has been used as a powerful tool for food quality assessment. However, the near-infrared (NIR) spectra comprise a large number of redundant information. Determining wavelengths relevance and selecting subsets for classification and prediction models are mandatory for the development of multispectral systems. A combination of both attribute and wavelength selection for NIR spectral information of chicken meat samples was investigated. Decision Trees and Decision Table predictors exploit these optimal wavelengths for classification tasks according to different quality grades of poultry meat. The proposed methodology was conducted with a support vector machine algorithm (SVM) to compare the precision of the proposed model. Experiments were performed on NIR spectral information (1050 wavelengths), colour (CIEL∗a∗b∗, chroma, and hue), water holding capacity (WHC), and pH of each sample analyzed. Results show that the best method was the REPTree based on 12 wavelengths, allowing for classification of poultry samples according to quality grades with 77.2% precision. The selected wavelengths could lead to potential simple multispectral acquisition devices.


Sign in / Sign up

Export Citation Format

Share Document