A Statistical Analysts of Serially Balanced Sequences: First Order Residuals Proportional to Direct Effects

1986 ◽  
Vol 35 (1-2) ◽  
pp. 31-36 ◽  
Author(s):  
Mausumi Sen ◽  
Bikas K. Sinha
Keyword(s):  
Direct Effect ◽  
Residual Effect ◽  
Residual Effects ◽  
Experimental Unit ◽  
Direct Effects ◽  
First Order ◽  
Balanced Sequences

We consider the situation where a number of treatments are successively applied to a single experimental unit with both the direct effect of a treatment (in the period it is applied) and its residual effect (in the following period) being considered as two separate components of variation. We specialize to the case where the residual effects are certain known/unknown fractions of the correeponding direct effects. We discuss a method of analysis of the underlying data and also present various related results.

scholarly journals Yeast extract plus blood plasma in diets for piglets from 36 to 60 days old

2016 ◽  
Vol 46 (6) ◽  
pp. 1107-1112
Author(s):  
Cinthia Maria Carlos Pereira ◽  
Juarez Lopes Donzele ◽  
Rita Flávia Miranda de Oliveira Donzele ◽  
Charles Kiefer ◽  
Verônica Maria Pereira Bernardino ◽  
...  
Keyword(s):  
Blood Plasma ◽  
Yeast Extract ◽  
Control Diet ◽  
Residual Effect ◽  
Residual Effects ◽  
Daily Weight Gain ◽  
Feed Consumption ◽  
Experimental Unit ◽  
Feed Conversion ◽  
Performance Variables

ABSTRACT: To evaluate inclusion levels and residual effects of diets containing yeast extract (YE) plus blood plasma (BP) on the performance of 36 to 60-days old piglets, 105 piglets were used (8.75±0.72kg), and they were distributed under a randomized block experimental design with five treatments (control - 2.0% BP; 1.0% BP plus 0.0, 1.0, 2.0, or 3.0% YE), seven repetitions, and three animals per experimental unit. Piglets were given experimental diets from 36 to 49 days of age. From 50 to 60 day of age, all piglets received the same diet. No effects from treatments (P>0.10) were observed on the performance variables from 36 to 49 day of age. From 50 to 60 day of age, an effect was observed from YE levels on the daily feed consumption (P<0.03), daily weight gain (p<0.01), and final weight (P<0.06), which increased quadratically up to 1.67, 1.67, and 1.55% YE levels, respectively. Piglets which were fed with the diet containing 1.0% BP + 2.0% YE were observed to have better feed conversion ratios (P<0.01) as compared to the control diet (2.0% BP). As it provides a better residual effect, the inclusion of 1.67% yeast extract may replace 50% of blood plasma in 36 to 49-days old piglet diets.

scholarly journals An Incomplete Block Change-Over Design Balanced for First and Second-Order Residual Effect

2013 ◽  
Vol 1 (1) ◽  
pp. 59
Author(s):  
Kanchan Chowdhury ◽  
Rumana Rois
Keyword(s):  
Residual Effect ◽  
Second Order ◽  
Residual Effects ◽  
Incomplete Block ◽  
First Order ◽  
Agriculture Economics ◽  
Balanced Designs

Balanced designs are often needed in agriculture, economics and other context. A series of balanced designs called incomplete block change-over design (IBCOD) has been developed. The analysis and the problems of IBCOD which also provide estimates of first-order and second-order residual effects have also been presented.

Experimental Designs Balanced for the Estimation of Residual Effects of Treatments

1949 ◽  
Vol 2 (2) ◽  
pp. 149 ◽  
Author(s):  
EJ Williams
Keyword(s):  
Residual Effect ◽  
Latin Squares ◽  
Experimental Designs ◽  
Residual Effects ◽  
Direct Effects ◽  
Balanced Design ◽  
Orthogonal Latin Squares ◽  
Mutually Orthogonal Latin Squares ◽  
Wide Applicability ◽  
Balanced Designs

Where an experiment can be carried out by applying different treatments in succession to the same unit of experimental material, accurate comparisons can be made between the effects of different treatments. To allow for the residual effect of previous treatments on the result obtained for any given treatment, it is desirable to adjust the results for such effects. Methods of constructing balanced designs for the estimation of these residual effects are described in this paper, and are summarized as follows. Designs balanced for effect of single preceding treatment: When n, the number of treatments, is even, a balanced design is possible with n replications ; when n is odd, 2n replications are required.Designs balanced for the effects of any number of preceding treatments, ignoring the interaction of residual effects: When n is a prime or a power of a prime, a balanced design is possible in n(n-1) replications, which may be set out as a set of n-1 mutually orthogonal Latin squares, with the same first columns. Designs which are not expressible as mutually orthogonal Latin squares are also possible. Designs balanced for the effect of the two preceding treatments and their interactions : A design can be developed from a set of n-l mutually orthogonal Latin squares obeying certain restrictions. The method of analysis of designs of this type is set out in detail, together with a numerical example. Direct effects of treatments are shown to be only slightly confounded, the maximum confounding being 4 per cent., when there are three treatments. These designs have wide applicability wherever successive treatments can be applied to the same unit of experimental material.

scholarly journals Growth and Biomass Yield of Brachiaria ruziziensis (Poaceae) under the Direct and Residual Effects of Fertilization with Hen Droppings at Flowering in West Cameroon

2020 ◽  
pp. 44-52
Author(s):  
Gilles Jiope Azangue ◽  
Fernand Tendonkeng ◽  
David Fokom Wauffo ◽  
Etienne Tedonkeng Pamo
Keyword(s):  
Direct Effect ◽  
Biomass Yield ◽  
Plant Biomass ◽  
Residual Effect ◽  
Residual Effects ◽  
Mineral Fertilizers ◽  
First Year ◽  
Brachiaria Ruziziensis ◽  
Whole Plants ◽  
The University

Aim: A study was conducted at the Research and Experimental Farm (REF) of the University of Dschang with the aim of evaluating the direct and residual effects of fertilization with hen droppings on the growth and biomass yield of Brachiaria ruziziensis at flowering. Methodology: A factorial design with five levels of fertilization in terms of nitrogen in hen droppings (0, 25, 50, 75 and 100 kg N/ha) on 6 m2 (3 m x 2 m) plots in four replicates, i.e. a total of 20 experimental plots was used. Fertilization with hen droppings was done one month after the placement of the stump chips, during the first year of cultivation (direct effects). In the second year of cultivation (residual effects), no fertilization was done. Measurements of plant heights and diameters were made on 40 plants per level of fertilization. Leaf, stem and whole-plant biomass assessments were made on all plots in relation to their fertilization levels. Results: This study shows that the direct effect of fertilization in the form of hen droppings resulted in heights and diameters significantly greater than those obtained under the residual effect of fertilization. Biomasses of whole plants and their different compartments obtained under the residual effect of fertilization were significantly higher than those obtained under the direct effect of fertilization. Under the direct and residual effect of fertilization, the heights, diameters and biomasses of the fertilized plots were greater than those of the control plots. The level of fertilization corresponding to the dose of 100 kg N/ha gave the best results. Conclusion: Fertilization with hen droppings at a dose of 100 kg N/ha would be recommended for the cultivation of B. ruziziensis over a two-year period, in order to limit the use of mineral fertilizers.

scholarly journals Designs involving sequences of treatments with residuals proportional to direct effects

2021 ◽  
Author(s):  
Cini Varghese ◽  
Seema Jaggi ◽  
Eldho Varghese ◽  
Mohd Harun ◽  
Devendra Kumar
Keyword(s):  
Empirical Study ◽  
Residual Effects ◽  
Experimental Unit ◽  
Direct Effects ◽  
Carryover Effects ◽  
Maximum Information ◽  
Popular Classes ◽  
New Treatment ◽  
Unit Period

Designs involving sequences of treatments are advantageously used when observations are taken repeatedly from same experimental unit period after period as a new treatment is applied in each period. Hence, inclusion of residual effects into the model becomes the most important feature of such designs. Six popular classes of designs involving sequences of treatments are studied under a model with carryover effects proportional to the direct effects where the unknown proportionality parameter assumed values from -1 to +1. The objective of this empirical study was to determine the value of proportionality parameter for which maximum information can be drawn from the design.

NITROGEN FERTILIZER REQUIREMENTS FOR BARLEY WHEN APPLIED WITH CATTLE MANURE CONTAINING WOOD SHAVINGS AS A SOIL AMENDMENT

1989 ◽  
Vol 69 (3) ◽  
pp. 515-523 ◽  
Author(s):  
D. C. MACKAY ◽  
J. M. CAREFOOT ◽  
T. G. SOMMERFELDT
Keyword(s):  
Protein Content ◽  
Residual Effect ◽  
N Fertilizer ◽  
Residual Effects ◽  
Yield Response ◽  
Soil Tests ◽  
Weather Factors ◽  
Hordeum Vulgare L ◽  
Chernozemic Soil ◽  
Mineralizable N

In an 8-yr experiment on an irrigated Dark Brown Chernozemic soil, four rates of N (0, 34, 67 and 101 kg ha−1), applied annually with 45 t ha−1 of manure containing softwood shavings (avg. of 46% dry wt) produced a linear yield response (from 3.5 with the check to 4.3 t ha−1 at the highest rate) of barley grain (Hordeum vulgare L. 'Galt'). There were large differences in yields among years, which could be attributed to weather factors, but there was no significant N × year response. Protein content increased linearly (from 11.2 to 13.5%), and both kernel weights and "test weights" (kg hL−1) decreased slightly but significantly with N applications. There was a pronounced "residual" effect of N rates on both grain yield (from 3.8 to 6.3 t ha−1) and protein content (from 10 to 13%) in the first year after applications of manure and N fertilizer ceased. These effects decreased rapidly and had practically disappeared by the end of the 3rd yr, although yields of all treatments remained high (about 5 t ha−1). Organic matter and N contents of the soil were increased by 70 and 41%, respectively, from the cumulative applications of shavings manure. It is concluded that application of manure containing large quantities of softwood shavings has a negligible effect on the N fertilizer requirements of the crop being grown. Beneficial residual effects of N fertilizer applied with the manure may result because of buildup of NO3-N throughout the soil profile, and likely also because of N release from readily mineralized organic compounds or microbial biomass. However, this effect was not reflected in soil tests for readily mineralizable N by NO3 incubation or KCl digestion methods and the effects were practically dissipated after 3 yr. The recovery of applied N fertilizer by the crops was high at all rates (61–79%), and essentially all of the N applied (fertilizer + manure) was accounted for by crop removal + increased soil N. Key words: Mineralizable-N soil tests, Chernozemic soil, repeated fertilizer applications, residual effects

Residual effects of nitrogen fertiliser on the yield and N composition of succeeding cereal crops and on soil chemical properties of an Ethiopian highland Vertisol

2000 ◽  
Vol 80 (1) ◽  
pp. 63-69 ◽  
Author(s):  
Selamyihun Kidanu ◽  
D. G. Tanner ◽  
Tekalign Mamo
Keyword(s):  
N Uptake ◽  
Chemical Properties ◽  
Residual Effect ◽  
Residual Effects ◽  
Cereal Crops ◽  
N Recovery ◽  
N Application ◽  
Total N ◽  
Current Season ◽  
The Mean

A trial was conducted on an Ethiopian Vertisol from 1990 to 1995 to determine the residual effects of fertiliser N applied to tef [Eragrostistef (Zucc.) Trotter] on the grain and straw yield, N content, and total N uptake of succeeding crops of durum wheat (Triticum turgidum var. durum) and tef. The mean agronomic efficiency of 60 kg fertiliser N ha−1 was 13.1 kg grain kg−1 fertiliser N applied in the current year and 5.4 kg grain kg−1 fertiliser N applied in the previous year. Thus, the residual fertiliser N benefit was equivalent to 41.2% of the response to current season N application for the two cereal crops. The mean rates of apparent recovery of fertiliser N were 65.8% for current season N application and 31.0% for previous season N application. Soil organic matter and nitrate levels increased linearly in response to both previous and current season N application rates. The current study demonstrates that the residual effect of fertiliser N enhanced the yields and N contents of the grain and straw of both wheat and tef, resulting in a significant increase in total N uptake. Any analysis of the profitability of fertiliser N response should reflect the multi-year benefit period. Key words: N recovery, N residue, N uptake, tef, wheat

scholarly journals Toxicity and residual effects of toxic baits with spinosyns on the South American fruit fly

2018 ◽  
Vol 53 (2) ◽  
pp. 144-151 ◽  
Author(s):  
Inana Xavier Schutze ◽  
Cléber Antonio Baronio ◽  
Morgana Mattiello Baldin ◽  
Alci Enimar Loek ◽  
Marcos Botton
Keyword(s):  
Residual Effect ◽  
Fruit Fly ◽  
Residual Effects ◽  
South American ◽  
Sugarcane Molasses ◽  
Anastrepha Fraterculus ◽  
Lethal Time ◽  
The One ◽  
Food Lures ◽  
South American Fruit Fly

Abstract: The objective of this work was to assess the lethal concentration and lethal time (LC and LT) of spinosad and spinetoram, combined with different food lures, and their residual effects on South American fruit fly (Anastrepha fraterculus). The toxic baits were offered in eight concentrations (2, 6, 14, 35, 84, 204, 495, and 1,200 mg L-1), combined with the following food lures: 7% sugarcane molasses, 3% Biofruit, 1.5% CeraTrap, 1.25% Flyral, 3% Samaritá Bait, and 3% Samaritá Tradicional; diluted food lures in water were used as controls. The residual effect of the formulations at 96 mg L-1 concentration were evaluated for 21 days and were compared with that of the commercial bait Success 0.02 CB. Both insecticides were toxic to adults of A. fraterculus, and mortality varied with the food lure used. The LC50and LT50ranged from 15.19 to 318.86 mg L-1and from 11.43 to 85.93 hours, respectively. Spinosad was 2 to 36 times as toxic as spinetoram when combined with different hydrolyzed proteins. Toxic baits formulated with spinosad and spinetoram (96 mg L-1) caused mortality equivalent to the one by Success 0.02 CB (90.2%), when assessed on the day of application. Toxic baits formulated with 3% Biofruit + spinosad and 3% Samaritá Bait + spinetoram are effective for managingA. fraterculusand provide up to seven days of residual effect in the absence of rain; however, only Success 0.02 CB caused more than 80% mortality for up to 21 days.

scholarly journals Direct and Residual Effect of Sulphur and Zinc on Potato-Boro-T. Aman Rice Cropping Pattern

2013 ◽  
Vol 19 (1) ◽  
pp. 33-38 ◽  
Author(s):  
MA Tarafder ◽  
MQ Haque ◽  
MM Rahman ◽  
MR Khan
Keyword(s):  
Grain Yield ◽  
Sandy Loam ◽  
Block Design ◽  
Residual Effect ◽  
Growth And Yield ◽  
Residual Effects ◽  
Cropping Pattern ◽  
Yield Attributes ◽  
The Third ◽  
Boro Rice

The experiment was conducted at the Bangladesh Institute of Nuclear Agriculture (BINA) sub-staion, Tajhat, Ranpure, using potato-Boro-T. aman rice cropping pattern with an objective to evaluate the direct and residual effects of sulphur and zinc on the growth, yield and nutrient uptake by the crops. The surface soil was sandy loam texture, pH 6.3, organic matter 1.24%, available sulphur 6.62 ppm and available zinc 0.45 ppm. The experiment comprised of eight treatments for potato S15Zn2 (T2, T4 and T8, S8Zn1 (T5 and T6)and S0Zn0 (T1, T3 and T7), for boro rice S20Zn4 (T3, T5, T6 and T7) and S0Zn0 (T1, T3, T4 and T6). The experiment was laid out in a randomized complete block design with three replications. Average tuber yield of potato (var. cardinal) varied from 28.29 to 32.86 t ha-1 with the highest yield in S15Zn2 treatment (100% recommended dose) and the lowest was in the S0Zn0 treatment (control). In the second crop (Boro rice), growth and yield attributes, grain and straw yields responded significantly to S and Zn applied either in the first crop or in both crops. The average grain yield varied from 3.51 to 5.27 t ha-1 over the treatments. In the third crop (T. aman rice), the grain and straw yields responded significantly to S and Zn applied either in the first and second crop or in the third crops. The grain yield of T. aman rice varied from 2.96 to 4.46 t ha-1 over the treatments. The growth and yield contributing characters were also significantly influenced by the treatment. There was a significant direct and residual effect of the treatments on S and Zn uptake by the crops.DOI: http://dx.doi.org/10.3329/pa.v19i1.16987 Progress. Agric. 19(1): 33 - 38, 2008 

The residual effect of molybdenum fertilizer on growth of tropical pasture legumes in a sub-tropical environment

1977 ◽  
Vol 17 (89) ◽  
pp. 961 ◽  
Author(s):  
C Johansen ◽  
PC Kerridge ◽  
PE Luck ◽  
BG Cook ◽  
KF Lowe ◽  
...  
Keyword(s):  
Molybdenum Trioxide ◽  
Sodium Molybdate ◽  
Residual Effect ◽  
Maximum Growth ◽  
Residual Effects ◽  
Panicum Maximum ◽  
Pasture Legumes ◽  
Initial Application ◽  
Tropical Legumes ◽  
Nitrogen Concentrations

The response of several tropical legumes, grown with Panicum maximum cv. Gatton, to an initial application of molybdenum as molybdenum trioxide was studied over a five year period at six sites in south-eastern Queensland. The most responsive legumes were Glycine wightii cv. Tinaroo and Desmodium intortum cv. Greenleaf, followed by Macroptilium atropurpureum cv. Siratro and Medicago sativa cv. Hunter River, with Lotononis bainesiicv. Miles and Stylosanthesguianensis cv. Cook being least responsive. Sites differed markedly in magnitude of legume response. For example, the most responsive site required 200 g ha-1 molybdenum over five years for maximum growth of Siratro whereas there was no response of Siratro to molybdenum application at another site. There was no difference between surface-applied molybdenum trioxide, molybdenum trioxide applied to the seed pellet and surface-applied sodium molybdate in their residual effects on legume growth. Response of the grass to molybdenum treatment was generally similar to legume response and nitrogen concentrations in legume and grass increased with yield.

Sign in / Sign up

Export Citation Format

Share Document