Optimization of stretch and recovery properties of woven stretch fabrics

2016 ◽  
Vol 87 (5) ◽  
pp. 582-592 ◽  
Author(s):  
Hatice Kübra Kaynak

Stretch woven fabrics are widely used owing to their comfortable properties such as formability, fitting to the human body and shape retention after wearing. These distinguishing properties are determined by stretch and recovery tests. The aim of this study is to determine the optimum elastane draw ratio, load and relaxation type for best stretch and recovery properties of woven stretch fabrics. An optimization model is developed to determine the optimum draw ratio of the elastane core in the yarn, load applied to the fabric and relaxation type for the best response variables of stretch and permanent stretch. The effects of the elastane draw ratio, load applied to the fabric and relaxation type on stretch and permanent stretch properties are found to be statistically significant according to analysis of variance results. Regression models are obtained to estimate the stretch and recovery properties for different elastane draw ratios and load levels. Additionally, the effect of the elastane draw ratio of the yarn on the fatigue properties of woven bi-stretch fabrics is investigated for dry relaxed and laundered states.

Author(s):  
Sunny Pannu ◽  
Meenakshi Ahirwar ◽  
Rishi Jamdigni ◽  
B. K. Behera

The woven fabrics containing cotton/spandex core spun yarns possesses very vital properties of stretch, recovery and thus shape retention from the view point of wearing comfort and garment appearance. Spandex present in the core of core spun yarn is the most essential performer behind these properties. An attempt is made in this research work to study the influence of changing spandex denier in core spun yarn on the stretch and functional properties of stretch woven fabrics. The sole objective of this study is to find out whether different stretch, shrinkage and physical properties of stretch woven fabrics depend upon changing spandex percentage achieved by means of change in spandex filament denier. It was observed that by increasing denier of spandex in core spun weft yarns the increase in weft shrinkage diminishes. Dual core weft with spandex provides good elongation percentage and recovery percentage. The fabric with higher denier spandex in yarn shows a decreasing total hand values trend for summer and winter. The results depicts that the fabrics have higher THV for winter suiting fabrics as compared to summer suiting thus are more suitable for the winter wear.


Author(s):  
Mohammed Alghobiri ◽  
Hikmat Ullah Khan ◽  
Ahsan Mahmood

The human liver is one of the major organs in the body and liver disease can cause many problems in human live. Due to the increase in liver disease, various data mining techniques are proposed by the researchers to predict the liver disease. These techniques are improving day by day in order to predict and diagnose the liver disease in human. In this paper, real-world liver disease dataset is incorporated for diagnosing liver disease in human body. For this purpose, feature selection models are used to select a number of features that best are the most important feature to diagnose the liver disease. After selecting features and splitting data for training and testing, different classification algorithms in terms of naïve Bayes, supervised vector machine, decision tree, k near neighbor and logistic regression models to diagnose the liver disease in human body. The results are cross-validated by tenfold cross validation methods and achieve an accuracy as good as 93%.


Blood ◽  
2016 ◽  
Vol 128 (22) ◽  
pp. 1063-1063 ◽  
Author(s):  
Maximilian Stahl ◽  
Nikolai A Podoltsev ◽  
Michelle DeVeaux ◽  
Sarah Perreault ◽  
Raphaël Itzykson ◽  
...  

Abstract Introduction: Patients with RR-AML, particularly older adults, have dismal outcomes and limited therapy options. Given low response rates and high toxicity with salvage intensive chemotherapy, and frequent ineligibility for allogeneic stem cell transplantation (alloSCT), many patients are treated with HMAs. Robust data regarding use of HMAs in AML predominates in the frontline setting, while their use in RR-AML has limited supportive data. Here wesought to analyze theoutcomes and their predictors in patients with RR-AML treated with HMAs. Methods:We collected data, spanning a period from 2006 to 2016, from 7 centers in the United States and 4 centers in Europe regarding patients treated with HMAs for RR-AML. Responses were defined by International Working Group criteria. Kaplan-Meier methods estimated overall survival (OS) from initiation of HMAs to death or end of follow-up. Multivariable logistic regression models estimated odds for response, and multivariable Cox Proportional Hazard (CPH) models estimated hazards ratios (HR) for OS. Covariates considered included HMA received, age at diagnosis (in years), AML classification at diagnosis (AML with myelodysplasia-related changes [AML-MRC], therapy-related [t]-AML), disease status (relapsed vs. refractory), number of therapy lines prior to HMA (1 vs. 2 vs. >=3), duration of first complete remission (CR1), white blood cell count, peripheral blood blast percentage, bone marrow (BM) cellularity (<=20% vs. > 20%), BM blast percentage (<=20% vs. >20%), cytogenetic risk group, and the presence of complex or chromosome 7 abnormalities. Results: Of 514 patients, 217 patients (42.2%) had refractory and 297 (58%) had relapsed AML. By end of study, 415 patients (88.5%) had died. Median follow-up for living patients was 11.6 months.Median age at diagnosis was 64 years (range [R], 16-92). AML-MRC was diagnosed in 29.0% while 8.2% had t-AML. Median number of prior therapies was 2 (R, 1-7), with 48.3% receiving 1 prior line, 30.2% receiving 2 prior lines, and 21.5% receiving >=3 prior lines. Prior alloSCT was performed in 21.2%. Only 1.9% had good risk (core binding factor) karyotype, while 56.2% had intermediate risk karyotype, and 41.9% had poor risk karyotype. Azacitidine was used in 45.8% and decitabine in 54.2%; median number of azacitidine cycles was 4 (Interquartile range [IQR], 2-6) compared to 2 for decitabine (IQR, 1-4, p <0.001). Best response to HMAs was CR in 11.7% (95%CI, 9%-14%), CRi in 6.4% (95%CI, 4.3%-8.8%), hematologic improvement (HI) in 8% (95%CI, 5.7%-10.5%), stable disease (SD) in 9.8% (95%CI, 7.2%-12.5%), while 64.1% (95%CI, 57.7%-66.2%) had progressive disease (PD). Median OS from HMA initiation for all patients was 6.9 months (IQR, 3.0-13.3). There was a significant difference in OS based on best response achieved [Figure 1]. Unadjusted OS showed an insignificant trend for worsening with increasing number of prior lines of therapy [Figure 2A]. In unadjusted analyses, there was no difference in OS based on HMA received in all patients [Figure 2B] or the subset who received only 1 prior line of therapy (median OS: Azacitidine vs. decitabine 8.4 vs 7.3 months, p=0.88). Following HMA therapy, the median number of subsequent therapies was 0 (R, 0-6), and only 12.8% underwent alloSCT. In multivariate CPH models, HMA used was not significantly associated with OS (HR=0.80, 95%CI, 0.42-1.51, p=0.49), while increasing age, and presence of complex cytogenetics and chromosome 7 abnormalities were significantly associated with risk of death [Table 1]. In multivariable logistic regression models, HMA used was not associated with achieving CR+CRi (Odds ratio=0.56, p=0.32). Conclusions: In this largest reported cohort of patients with RR-AML treated with HMAs, we found that HMAs are often used as alast line of therapy, with a minority of patients receiving subsequent treatment. Nonetheless, the minority of patients who achieve CR (11.7%) with HMA therapy had a median OS of 25.6 months. Therefore, use of HMAs for management of RR-AML is a reasonable intervention in the absence of clinical trial options. There appears to be no difference in OS or probability of achieving CR+CRi based on HMA used. Ongoing analyses in this dataset include further evaluations of predictors, including genetic mutations, and the development of prediction tools for clinical outcomes with HMA therapy. Figure 1. Figure 1. Disclosures Podoltsev: Ariad: Consultancy, Honoraria; Incyte: Consultancy, Honoraria. Ritchie:Novartis: Honoraria; Incyte: Speakers Bureau; Arian: Speakers Bureau; Pfizer: Honoraria; Celgene: Speakers Bureau. Sekeres:Millenium/Takeda: Membership on an entity's Board of Directors or advisory committees; Celgene: Membership on an entity's Board of Directors or advisory committees. Komrokji:Celgene: Membership on an entity's Board of Directors or advisory committees, Research Funding; Novartis: Consultancy, Speakers Bureau. Al-Kali:Onconova Therapeutics, Inc.: Research Funding; Celgene: Research Funding. Santini:Celgene: Consultancy, Honoraria, Research Funding; Janssen: Consultancy, Honoraria; Novartis: Consultancy, Honoraria; Onconova: Consultancy; Amgen: Consultancy; Astex: Consultancy. Roboz:Cellectis: Research Funding; Agios, Amgen, Amphivena, Astex, AstraZeneca, Boehringer Ingelheim, Celator, Celgene, Genoptix, Janssen, Juno, MEI Pharma, MedImmune, Novartis, Onconova, Pfizer, Roche/Genentech, Sunesis, Teva: Consultancy. Fenaux:Celgene, Janssen,Novartis, Astex, Teva: Honoraria, Research Funding. Prebet:celgene: Consultancy, Honoraria; Novartis: Consultancy, Honoraria. Gore:celgene: Consultancy, Honoraria. Zeidan:Ariad: Consultancy, Honoraria; Pfizer: Consultancy, Honoraria; Incyte: Consultancy, Honoraria; Celgene: Consultancy, Honoraria.


2016 ◽  
Vol 16 (3) ◽  
pp. 160-164
Author(s):  
Muhammad Maqsood ◽  
Yasir Nawab ◽  
Khubab Shaker ◽  
Muhammad Umair ◽  
Munir Ashraf ◽  
...  

Abstract The paper investigates the effects of weave structure and fabric thread density on the comfort and mechanical properties of various test fabrics woven from polyester/cotton yarns. Three different weave structures, that is, 1/1 plain, 2/1 twill and 3/1 twill, and three different fabric densities were taken as input variables whereas air permeability, overall moisture management capacity, tensile strength and tear strength of fabrics were taken as response variables and a comparison is made of the effect of weave structure and fabric density on the response variables. The results of fabric samples were analysed in Minitab statistical software. The coefficients of determinations (R-sq values) of the regression equations show a good predictive ability of the developed statistical models. The findings of the study may be helpful in deciding appropriate manufacturing specifications of woven fabrics to attain specific comfort and mechanical properties.


1992 ◽  
Vol 62 (5) ◽  
pp. 293-301 ◽  
Author(s):  
Patricia A. Annis ◽  
Randall R. Bresee ◽  
Terry R. Cooper

A machine designed to abrade fabrics using small abrasive forces and slow rates is used to induce fiber transfer from twelve woven fabrics. Single fiber transfer, the release and relocation of individual fibers, is evaluated in terms of the number and length of fibers transferred, along with the influence of several fiber, yarn, and fabric structural features on fiber transfer. Modeling procedures indicate that structural features that predict fiber transfer best are fiber denier, fiber length, and weave type. The influence of these features is complex, and analysis of variance indicates that fiber transfer is significantly affected by their interaction.


Sign in / Sign up

Export Citation Format

Share Document