The Effects of Reversing the Roles of the Hands on the Development of Piano Performance Skill: A Preliminary Investigation

1998 ◽  
Vol 26 (1) ◽  
pp. 89-96 ◽  
Author(s):  
Vernon Burnsed ◽  
Scott Humphries
Keyword(s):  
Preliminary Investigation ◽  
Piano Performance ◽  
Hands On

Remote Resistance Welding of Zr-4 Endplate for DUPIC Fuel Fabrication

2008 ◽  
Vol 580-582 ◽  
pp. 397-400 ◽  
Author(s):  
Soo Sung Kim ◽  
Dae Seo Koo ◽  
Geun Il Park ◽  
Jin Hyun Koh
Keyword(s):  
Preliminary Investigation ◽  
Welding Process ◽  
Resistance Welding ◽  
Optimum Conditions ◽  
Candu Reactors ◽  
Welding Technology ◽  
Fuel Fabrication ◽  
Hands On ◽  
End Caps ◽  
Direct Use

The remote resistance welding technology in the hot cell environment for DUPIC (Direct Use of spent PWR fuel In CANDU reactors) fuel fabrication was established. To do this, a preliminary investigation for hands-on fuel fabrication outside the hot cell was conducted in the consideration of constraints caused by welding in the hot cell. Further welding experiments were carried out to improve the RW process. A remote resistance welding apparatus was developed. The characteristics of welds made by RW and LBW were compared in terms of the weld nugget penetrations and torque strength. It was found that resistance welding was a more suitable welding process for joining the endplate to the end caps in the hot cell. The optimum conditions for RW in the hot cell operation in a remote manner were also obtained.

Development of a Remote Welding Machine for a DUPIC Fuel Bundle Fabrication

2009 ◽  
Author(s):  
Soo-sung Kim ◽  
Geun-il Park ◽  
Jung-won Lee ◽  
Jin-hyun Koh
Keyword(s):  
Preliminary Investigation ◽  
Laser Beam Welding ◽  
Welding Process ◽  
Resistance Welding ◽  
Welding Parameters ◽  
Current Electrode ◽  
Welding Machine ◽  
Hands On ◽  
Welding Processes ◽  
Remote Welding

A remote welding machine for a DUPIC (Direct Use of spent PWR fuel In CANDU reactors) bundle fabrication was designed to establish the optimum welding processes in a hot cell environment. An initial investigation for hands-on fabrication outside the hot cell was performed in the consideration of the constraints of welding machine in the hot cell conditions. Gas tungsten arc welding (GTAW), laser beam welding (LBW), friction welding (FW), and resistance welding (RW) process were assessed as candidates for this application. A preliminary welding investigation to improve the RW process was also performed. The RW process was determined to be the most suitable process in a hot cell environment for joining an endplate to an endcap. An advantage of RW would be a qualified process for overlapped plates welding for which there is extensive production experience were available. A preliminary investigation for a hands-on fuel fabrication outside the hot cell was conducted in the consideration of the constraints caused by a welding in a hot cell. The optimum resistance welding parameters for the endplate welding process were obtained in terms of the current, electrode pressure and welding cycle. This paper presents an outline of the developed RW machine for a DUPIC bundle fabrication and reviews the conceptual design of a remote RW welder by using a master-slave manipulator. The design of RW machine by using the 3D modeling method was also designed. Furthermore the integrity of the welds by the resistance welding was confirmed by the results of the torque test, an examination of the microstructure and the fracture surfaces of the welds.

Surface ultrastructure of danazol treated rat endometrium: A SEM study

1983 ◽  
Vol 41 ◽  
pp. 556-557
Author(s):  
R.P. Apkarian ◽  
J.S. Sanfilippo
Keyword(s):  
Cross Sections ◽  
Reproductive Tract ◽  
Preliminary Investigation ◽  
Breast Disease ◽  
Distal Segment ◽  
Uterine Horn ◽  
Female Reproductive Tract ◽  
Ultrastructural Changes ◽  
Cycle Phase ◽  
Sprague Dawley

The synthetic androgen danazol, is an isoxazol derivative of ethisterone. It is utilized in the treatment of endometriosis, fibrocystic breast disease, and has a potential use as a contraceptive. A study was designed to evaluate the ultrastructural changes associated with danazol therapy in a rat model. The preliminary investigation of the distal segment of the rat uterine horn was undertaken as part of a larger study intended to elucidate the effects of danazol on the female reproductive tract.Cross-sections (2-3 mm in length) of the distal segment of the uterine horn from sixteen Sprague-Dawley rats were prepared for SEM. Ten rats in estrus served as controls and six danazol treated rats were noted to have alterations of the estrus cycle i.e. a lag in cycle phase or noncycling patterns. Specimens were fixed in 3% glutaraldehyde in 0.05M phosphate buffer containing CaCl2 at pH 7.0-7.4 and chilled to 4°C. After a brief wash in distilled water, specimens were passed through a graded series of ethanol, critical point dryed in CO2 from absolute ethanol, and coated with 6nm Au. Observations were made with an IS1-40 SEM operated at 15kV.

A Comparison of the Ultrastructural Morphology of Hepatic Necrosis in BDF1 Mice

1981 ◽  
Vol 39 ◽  
pp. 586-587
Author(s):  
Becky Jackson
Keyword(s):  
Endoplasmic Reticulum ◽  
Smooth Endoplasmic Reticulum ◽  
Preliminary Investigation ◽  
Hepatic Necrosis ◽  
Hepatic Tissue ◽  
Pronounced Increase ◽  
Glycogen Store ◽  
Ultrastructural Morphology ◽  
Mitochondrial Integrity ◽  
Glycogen Stores

Preliminary investigation has indicated similarity in hepatic ultrastructural morphology in nutritional deprivation, and cyanide induced hepatic necrosis. Analysis of hepatic tissue has indicated disruption of intracellular membranes, specifically, reduction in rough endoplasmic reticulum (RER) mitochondrial integrity, and glycogen stores. An increase in smooth endoplasmic reticulum (SER) portion was observed.To further investigate the apparent equivalence of necrotic morphology, ultrastructura1ly, BDF1 mice were subjected to senescence, nutritional deprevation, potassium cyanide (KCN) induced toxemia, and acetaminophen induced toxemia. Controls were utilized to ellucidate non-necrotic hepatocellular normals. U1trastructura1 investigation of controls (Fig. 1) shows densely granular RER, abundant glycogen stores, and morphologically normal mitochondria. Subjects with acetaminophen induced necrosis exhibit reduced normal RER with increased levels of dialated, vesicular RER in apparent conversion to SER (Fig. 2), loss of mitochondrial integrity, and glycogen store reduction. Senescent subjects exhibit a pronounced increase in SER and loss of glycogen store. (Fig. 3). Investigation of the senescent SER at high magnification (Fig. 5) indicates that the SER is arising from degranulating and vesiculating RER.

Ultrastructural Effects of Acute Kepone Treatment in Rats

1976 ◽  
Vol 34 ◽  
pp. 286-287
Author(s):  
Richard L. Klein ◽  
Åsa K. Thureson-Klein ◽  
Harihara M. Mehendale
Keyword(s):  
Neurological Disorders ◽  
Corn Oil ◽  
Preliminary Investigation ◽  
Reproductive Capacity ◽  
Ultrastructural Changes ◽  
Lipid Deposition ◽  
Severe Toxicity ◽  
Sprague Dawley ◽  
Ether Anesthesia ◽  
Sprague Dawley Rats

KeponeR (decachlorooctahydro-1,3,4-metheno-2H-cyclobuta[cd]pentalen-2-one) is an insecticide effective against ants and roaches. It can cause severe toxicity in fishes, birds, rodents and man. Prominent effects include hepatic lipid deposition and hypertrophy, impairment of reproductive capacity and neurological disorders. Mitochondrial oligomycin-sensitive Mg2+-ATPase is also inhibited. The present study is a preliminary investigation of tissue ultrastructural changes accompanying physiological signs of acute toxicity, which after two days treatment include: pronounced hypersensitivity and tremor, various degrees of anorexia and adipsia, and decreased weight gain.Three different series of adult male Sprague-Dawley rats (Charles River or CD-I) were treated by intubation with Kepone in corn oil at a dose of 50 mg per kg for 3 successive days or at 200 ppm in food for 8 days. After ether anesthesia, rats were immediately perfused via a cannula in the left ventricle with 4% p-formaldehyde and 0.5% glutaraldehyde in Millonig's phosphate buffer at pH 7.2 for 20-30 min at 22°C.

The Instructional SEM Laboratory at Iowa State University

1996 ◽  
Vol 54 ◽  
pp. 396-397
Author(s):  
L. S. Chumbley ◽  
M. Meyer ◽  
K. Fredrickson ◽  
F.C. Laabs
Keyword(s):  
Materials Science ◽  
Computer Network ◽  
Energy Dispersive Spectrometer ◽  
Computer Control ◽  
State University ◽  
Iowa State University ◽  
Internet Server ◽  
Schematic Layout ◽  
Hands On ◽  
Improve Instruction

The Materials Science Department at Iowa State University has developed a laboratory designed to improve instruction in the use of the scanning electron microscope (SEM). The laboratory makes use of a computer network and a series of remote workstations in a classroom setting to provide students with increased hands-on access to the SEM. The laboratory has also been equipped such that distance learning via the internet can be achieved.A view of the laboratory is shown in Figure 1. The laboratory consists of a JEOL 6100 SEM, a Macintosh Quadra computer that acts as a server for the network and controls the energy dispersive spectrometer (EDS), four Macintosh computers that act as remote workstations, and a fifth Macintosh that acts as an internet server. A schematic layout of the classroom is shown in Figure 2. The workstations are connected directly to the SEM to allow joystick and computer control of the microscope. An ethernet connection between the Quadra and the workstations allows students seated there to operate the EDS. Control of the microscope and joystick is passed between the workstations by a switch-box assembly that resides at the microscope console. When the switch-box assembly is activated a direct serial line is established between the specified workstation and the microscope via the SEM’s RS-232.

Students Involvement in Multilingual and Multicultural Community Services

2015 ◽  
Vol 22 (2) ◽  
pp. 77-89 ◽  
Author(s):  
Ying-Chiao Tsao
Keyword(s):  
Service Learning ◽  
Cultural Competence ◽  
Linguistically Diverse ◽  
Community Services ◽  
Cultural Humility ◽  
Self Assessment ◽  
Multicultural Community ◽  
Raising Awareness ◽  
Hands On ◽  
Teaching Learning

Promoting cultural competence in serving diverse clients has become critically important across disciplines. Yet, progress has been limited in raising awareness and sensitivity. Tervalon and Murray-Garcia (1998) believed that cultural competence can only be truly achieved through critical self-assessment, recognition of limits, and ongoing acquisition of knowledge (known as “cultural humility”). Teaching cultural humility, and the value associated with it remains a challenging task for many educators. Challenges inherent in such instruction stem from lack of resources/known strategies as well as learner and instructor readiness. Kirk (2007) further indicates that providing feedback on one's integrity could be threatening. In current study, both traditional classroom-based teaching pedagogy and hands-on community engagement were reviewed. To bridge a gap between academic teaching/learning and real world situations, the author proposed service learning as a means to teach cultural humility and empower students with confidence in serving clients from culturally/linguistically diverse backgrounds. To provide a class of 51 students with multicultural and multilingual community service experience, the author partnered with the Tzu-Chi Foundation (an international nonprofit organization). In this article, the results, strengths, and limitations of this service learning project are discussed.

Sign in / Sign up

Export Citation Format

Share Document