Biological and mechanical evaluation of mineralized-hydrogel scaffolds for tissue engineering applications

2021 ◽  
pp. 088532822199542
Author(s):  
Aitor Tejo-Otero ◽  
Alastair C Ritchie
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Biological Properties ◽  
Hydrogel Scaffolds ◽  
Wide Range ◽  
Calcium Minerals ◽  
The One ◽  
Calcium Compounds ◽  
Cell Adhesion And Proliferation

Chitosan and gelatin have been extensively used in tissue engineering for a wide range of different applications, such as wound healing or bone regeneration, due to their advantages: excellent biocompatibility (promoting cell adhesion and proliferation), low price and biodegradability. Nonetheless, their main drawback is that they have poor mechanical properties, consequently restricting their use in bone tissue engineering. In previous studies, both materials were cross-linked, with added calcium minerals, which led to an improvement in both mechanical and biological properties. Therefore, this study carries out a mechanical and biological characterization of mineral-hydrogel scaffolds in order to find the best compositions. Different proportions of calcium compounds (CaCO3 and CaHPO4) are used to make up between 20% and 30% of the minerals used in a mineral-hydrogel mix. This addition of minerals enhances not only the mechanical properties, but also the biological ones. On the one hand, the higher the amount of minerals added to the composition, the better the mechanical properties obtained. Additionally, as the proportion of CaCO3 in comparison with CaHPO4 rises, the mechanical properties improve. On the other hand, both cell proliferation and mineralization are improved with the addition of calcium minerals.

scholarly journals Bioactive potential of natural biomaterials: identification, retention and assessment of biological properties

2021 ◽  
Vol 6 (1) ◽  
Author(s):  
Kieran Joyce ◽  
Georgina Targa Fabra ◽  
Yagmur Bozkurt ◽  
Abhay Pandit
Keyword(s):  
Tissue Engineering ◽  
Therapeutic Potential ◽  
Biological Properties ◽  
Biological Assessment ◽  
Cross Linking ◽  
Natural Polymers ◽  
Drug Delivery Device ◽  
Biomedical Device ◽  
Wide Range ◽  
Bioactive Potential

AbstractBiomaterials have had an increasingly important role in recent decades, in biomedical device design and the development of tissue engineering solutions for cell delivery, drug delivery, device integration, tissue replacement, and more. There is an increasing trend in tissue engineering to use natural substrates, such as macromolecules native to plants and animals to improve the biocompatibility and biodegradability of delivered materials. At the same time, these materials have favourable mechanical properties and often considered to be biologically inert. More importantly, these macromolecules possess innate functions and properties due to their unique chemical composition and structure, which increase their bioactivity and therapeutic potential in a wide range of applications. While much focus has been on integrating these materials into these devices via a spectrum of cross-linking mechanisms, little attention is drawn to residual bioactivity that is often hampered during isolation, purification, and production processes. Herein, we discuss methods of initial material characterisation to determine innate bioactivity, means of material processing including cross-linking, decellularisation, and purification techniques and finally, a biological assessment of retained bioactivity of a final product. This review aims to address considerations for biomaterials design from natural polymers, through the optimisation and preservation of bioactive components that maximise the inherent bioactive potency of the substrate to promote tissue regeneration.

scholarly journals Insights into Mechanical Properties of the 1980 Irpinia Fault System from the Analysis of a Seismic Sequence

Geosciences ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 28
Author(s):  
Gaetano Festa ◽  
Guido Maria Adinolfi ◽  
Alessandro Caruso ◽  
Simona Colombelli ◽  
Grazia De Landro ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Early Warning Systems ◽  
Fault System ◽  
Minimum Size ◽  
Double Difference ◽  
Warning Systems ◽  
Initiation Mechanism ◽  
Earthquake Early Warning Systems ◽  
The One

Seismic sequences are a powerful tool to locally infer geometrical and mechanical properties of faults and fault systems. In this study, we provided detailed location and characterization of events of the 3–7 July 2020 Irpinia sequence (southern Italy) that occurred at the northern tip of the main segment that ruptured during the 1980 Irpinia earthquake. Using an autocorrelation technique, we detected more than 340 events within the sequence, with local magnitude ranging between −0.5 and 3.0. We thus provided double difference locations, source parameter estimation, and focal mechanisms determination for the largest quality events. We found that the sequence ruptured an asperity with a size of about 800 m, along a fault structure having a strike compatible with the one of the main segments of the 1980 Irpinia earthquake, and a dip of 50–55° at depth of 10.5–12 km and 60–65° at shallower depths (7.5–9 km). Low stress drop release (average of 0.64 MPa) indicates a fluid-driven initiation mechanism of the sequence. We also evaluated the performance of the earthquake early warning systems running in real-time during the sequence, retrieving a minimum size for the blind zone in the area of about 15 km.

scholarly journals 14-3-3ε protein-loaded 3D hydrogels favor osteogenesis

2020 ◽  
Vol 31 (11) ◽  
Author(s):  
Ana A. Aldana ◽  
Marina Uhart ◽  
Gustavo A. Abraham ◽  
Diego M. Bustos ◽  
Aldo R. Boccaccini
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
3D Printing ◽  
Osteogenic Differentiation ◽  
Alginate Hydrogel ◽  
Hydrogel Scaffolds ◽  
Future Developments ◽  
Positive Effect ◽  
Cell Adhesion And Proliferation

Abstract3D printing has emerged as vanguard technique of biofabrication to assemble cells, biomaterials and biomolecules in a spatially controlled manner to reproduce native tissues. In this work, gelatin methacrylate (GelMA)/alginate hydrogel scaffolds were obtained by 3D printing and 14-3-3ε protein was encapsulated in the hydrogel to induce osteogenic differentiation of human adipose-derived mesenchymal stem cells (hASC). GelMA/alginate-based grid-like structures were printed and remained stable upon photo-crosslinking. The viscosity of alginate allowed to control the pore size and strand width. A higher viscosity of hydrogel ink enhanced the printing accuracy. Protein-loaded GelMA/alginate-based hydrogel showed a clear induction of the osteogenic differentiation of hASC cells. The results are relevant for future developments of GelMA/alginate for bone tissue engineering given the positive effect of 14-3-3ε protein on both cell adhesion and proliferation.

Hybrid nanostructured hydroxyapatite–chitosan composite scaffold: bioinspired fabrication, mechanical properties and biological properties

2015 ◽  
Vol 3 (23) ◽  
pp. 4679-4689 ◽  
Author(s):  
Ya-Ping Guo ◽  
Jun-Jie Guan ◽  
Jun Yang ◽  
Yang Wang ◽  
Chang-Qing Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Composite Scaffold ◽  
Biological Properties ◽  
Chitosan Composite

A bioinspired strategy has been developed to fabricate a hybrid nanostructured hydroxyapatite–chitosan composite scaffold for bone tissue engineering.

scholarly journals Additive manufacturing of PLA-based scaffolds intended for bone regeneration and strategies to improve their biological properties

e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 571-599
Author(s):  
Ricardo Donate ◽  
Mario Monzón ◽  
María Elena Alemán-Domínguez
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Additive Manufacturing ◽  
Bone Regeneration ◽  
Polylactic Acid ◽  
State Of The Art ◽  
Biological Properties ◽  
Design Stage ◽  
Bone Scaffolds ◽  
Regeneration Of Bone

AbstractPolylactic acid (PLA) is one of the most commonly used materials in the biomedical sector because of its processability, mechanical properties and biocompatibility. Among the different techniques that are feasible to process this biomaterial, additive manufacturing (AM) has gained attention recently, as it provides the possibility of tuning the design of the structures. This flexibility in the design stage allows the customization of the parts in order to optimize their use in the tissue engineering field. In the recent years, the application of PLA for the manufacture of bone scaffolds has been especially relevant, since numerous studies have proven the potential of this biomaterial for bone regeneration. This review contains a description of the specific requirements in the regeneration of bone and how the state of the art have tried to address them with different strategies to develop PLA-based scaffolds by AM techniques and with improved biofunctionality.

Synthesis and characterization of poly(glycerol sebacate)-based elastomeric copolyesters for tissue engineering applications

2016 ◽  
Vol 7 (14) ◽  
pp. 2553-2564 ◽  
Author(s):  
Yating Jia ◽  
Weizhong Wang ◽  
Xiaojun Zhou ◽  
Wei Nie ◽  
Liang Chen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Water Uptake ◽  
Synthesis And Characterization ◽  
Uptake Capacity ◽  
Engineering Applications ◽  
Water Uptake Capacity

A poly(glycerol sebacate)-based elastomeric copolyesters with improved mechanical properties and higher water uptake capacity.

scholarly journals Characterization of an Insoluble and Soluble Form of Melanin Produced by Streptomyces cavourensis SV 21, a Sea Cucumber Associated Bacterium

Marine Drugs ◽  
2022 ◽  
Vol 20 (1) ◽  
pp. 54
Author(s):  
Joko Tri Wibowo ◽  
Matthias Y. Kellermann ◽  
Lars-Erik Petersen ◽  
Yustian R. Alfiansah ◽  
Colleen Lattyak ◽  
...  
Keyword(s):  
Biological Properties ◽  
Water Soluble ◽  
Soluble Form ◽  
Wide Range ◽  
Biological Form ◽  
Insoluble Form ◽  
New Perspective ◽  
Living Organisms ◽  
Purification Protocol

Melanin is a widely distributed and striking dark-colored pigment produced by countless living organisms. Although a wide range of bioactivities have been recognized, there are still major constraints in using melanin for biotechnological applications such as its fragmentary known chemical structure and its insolubility in inorganic and organic solvents. In this study, a bacterial culture of Streptomyces cavourensis SV 21 produced two distinct forms of melanin: (1) a particulate, insoluble form as well as (2) a rarely observed water-soluble form. The here presented novel, acid-free purification protocol of purified particulate melanin (PPM) and purified dissolved melanin (PDM) represents the basis for an in-depth comparison of their physicochemical and biological properties, which were compared to the traditional acid-based precipitation of melanin (AM) and to a synthetic melanin standard (SM). Our data show that the differences in solubility between PDM and PPM in aqueous solutions may be a result of different adjoining cation species, since the soluble PDM polymer is largely composed of Mg2+ ions and the insoluble PPM is dominated by Ca2+ ions. Furthermore, AM shared most properties with SM, which is likely attributed to a similar, acid-based production protocol. The here presented gentler approach of purifying melanin facilitates a new perspective of an intact form of soluble and insoluble melanin that is less chemical altered and thus closer to its original biological form.

scholarly journals Porous Cellulose-Collagen Scaffolds For Soft Tissue Regeneration: Influence of Cellulose Derivatives On Mechanical Properties And Compatibility With Adipose-Derived Stem Cells.

2022 ◽  
Author(s):  
Katarína Kacvinská ◽  
Martina Trávničková ◽  
Lucy Vojtová ◽  
Petr Poláček ◽  
Jana Dorazilová ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Stem Cells ◽  
Cell Adhesion ◽  
Soft Tissue ◽  
Vascular Tissue ◽  
Biological Properties ◽  
Cellulose Derivatives ◽  
Adipose Derived Stem Cells ◽  
Soft Tissue Regeneration

Abstract This study deals with cellulose derivatives in relation to the collagen fibrils in composite collagen-cellulose scaffolds for soft tissue engineering. Two types of cellulose, i.e., oxidized cellulose (OC) and carboxymethyl cellulose (CMC), were blended with collagen (Col) to enhance its elasticity, stability and sorptive biological properties, e.g. hemostatic and antibacterial features. The addition of OC supported the resistivity of the Col fibrils in a dry environment, while in a moist environment OC caused a radical drop. The addition of CMC reduced the mechanical strength of the Col fibrils in both environments. The elongation of the Col fibrils was increased by both types of cellulose derivatives in both environments, which is closely related to tissue like behaviour. In these various mechanical environments, the ability of human adipose-derived stem cells (hADSCs) to adhere and proliferate was significantly greater in the Col and Col/OC scaffolds than in the Col/CMC scaffold. This is explained by deficient mechanical support and loss of stiffness due to the high swelling capacity of CMC. Although Col/OC and Col/CMC acted differently in terms of mechanical properties, both materials were observed to be cytocompatible, with varying degrees of further support for cell adhesion and proliferation. While Col/OC can serve as a scaffolding material for vascular tissue engineering and for skin tissue engineering, Col/CMC seems to be more suitable for moist wound healing, e.g. as a mucoadhesive gel for exudate removal, since there was almost no cell adhesion.

FABRICATION AND CHARACTERIZATION OF CALCIUM SILICATE SCAFFOLDS FOR TISSUE ENGINEERING

2014 ◽  
Vol 14 (04) ◽  
pp. 1450049 ◽  
Author(s):  
CIJUN SHUAI ◽  
ZHONGZHENG MAO ◽  
ZIKAI HAN ◽  
SHUPING PENG ◽  
ZHENG LI
Keyword(s):  
Tissue Engineering ◽  
Calcium Silicate ◽  
Laser Power ◽  
Selective Laser Sintering ◽  
Biological Properties ◽  
High Temperature Phase ◽  
Temperature Phase ◽  
Conventional Technology

Calcium silicate ( CaSiO 3) is a promising material due to its favorable biological properties. However, it was difficult to fabricate ceramic scaffolds with interconnected porous structure via conventional technology. In present study, CaSiO 3 scaffolds with totally interconnected pores were fabricated via selective laser sintering (SLS). The microstructure, mechanical and biological properties were examined. The results revealed that the powder gradually fused together with the reduction of voids and the elimination of particle boundary as the laser power increased in the range of 3–15 W with scanning electron microscope. Meanwhile the low-temperature phase (β- CaSiO 3) transformed into high-temperature phase (α- CaSiO 3) gradually, which decreased the mechanical properties of the obtained scaffolds. Besides, the compressive strength increased from 12.9 ± 2.34 MPa to 18.19 ± 1.24 MPa (the laser power is 12 w) and then decreased gradually with increasing laser power. In vitro biological properties of CaSiO 3 scaffolds sintered under optimal conditions indicated that the distribution of apatite mineralization became uniform as the amount of them increased after being immersed in simulated body fluids. In the meantime, the thin cytoplasmic extensions of MG-63 cells increased until formed a dense cell layer after 1–5 days of cell culture. The results suggested that the CaSiO 3 scaffold fabricated via SLS has potential application for bone tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document