Functionalized multiwalled carbon nanotubes by loading phosphorylated chitosan

2017 ◽  
Vol 30 (9) ◽  
pp. 1036-1047
Author(s):  
Baoxia Xue ◽  
Yun Peng ◽  
Yinghao Song ◽  
Jie Bai ◽  
Mei Niu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Flame Retardant ◽  
Multiwalled Carbon Nanotubes ◽  
Flame Retardancy ◽  
Char Residue ◽  
Combustion Time ◽  
Multiwalled Carbon ◽  
Decomposition Products ◽  
Flame Retardant Properties

Novel flame-retardant phosphorylated chitosan-multiwalled carbon nanotubes (PCS-MWCNTs) were obtained by the loading of PCS on the surface of MWCNTs by a chemical deposition cross-linking method. A series of polyethylene terephthalate (PET) composites were prepared by melt compounding with MWCNTs or PCS-MWCNTs to investigate the flame-retardant properties. Field-emission scanning electron microscopy, transmission electron microscopy, and Fourier transform infrared (FTIR) spectrometry were employed to characterize the morphology, chemical structure, and functionalization effect of MWCNTs. The coating degree and thermal stability of PCS-MWCNTs were investigated by thermogravimetric analysis (TGA). Thermal decomposition products after TGA and flame-retardant properties of PET composites were characterized by FTIR and CONE measurements, respectively. The results indicated that PCS is loaded on the MWCNT surface. Modified PCS-MWCNTs exhibited better dispersion and efficient flame retardancy. TGA data indicated that PCS-MWCNTs can enhance the onset temperature of PET and increase the amount of the char residues. The char residue with 1 wt% PCS-MWCNTs/PET increased from 12.62% (pure PET) to 15.46%. The analysis of the decomposition products and morphology of the char residue indicated that PCS-MWCNTs not only retain the effect of alternating couplet carbon (C) and physical barrier by MWCNTs, but also form P–C compounds, improving the flame retardancy of PET. CONE tests demonstrated that the PCS-MWCNTs lead to the efficient decrease in the flammability parameters, such as the heat release rate (HRR), total release heat rate (THR), total smoke production (TSP), mean mass loss rate (MMLR), and the total combustion time. The peak HRR value decreased from 513.22 kW m−2 to 341 kW m−2. The THR, TSP, and MMLR values decreased by 20.38 MJ m−2, 1.1 m2, and 1.32 g s−1, respectively. The total combustion time decreased by 98 s, from 388 s to 290 s, indicating that PCS-MWCNTs extinguish fire.

scholarly journals Effects of Hybrid Graphene Oxide with Multiwalled Carbon Nanotubes and Nanoclay on the Mechanical Properties and Fire Resistance of Epoxy Nanocomposite

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Tuan Anh Nguyen ◽  
Thi Thu Trang Bui
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Graphene Oxide ◽  
Flame Retardant ◽  
Multiwalled Carbon Nanotubes ◽  
Fire Resistance ◽  
Nanocomposite Materials ◽  
Multiwalled Carbon ◽  
Epoxy Nanocomposite ◽  
Flame Retardant Properties

In this study, nanoclay I.30E and multiwalled carbon nanotubes (MWCNT) were hybridized with graphene oxide (GO) on Epikote 240 epoxy resin. Research results show that the hybridization between 0.5 wt.% GO with 1 or 3 wt.% nanoclay and 0.05 wt.% MWCNT has better mechanical properties and flame-retardant properties than the component materials. The combination of epoxy nanocomposite materials with flame-retardant additives such as nanoclay, MWCNT, and GO leads to improving flame-retardant and mechanical properties. Flame-retardant materials have no environmental problems and are nontoxic. Therefore, the flame-retardant additives studied in this work have great potential to become one of the promising flame-retardant hybrid materials. The study also showed that the result of the combination, the hybridization between the three components (nanoclay, MWCNT, and GO) synergized the mechanisms of fire resistance, creating insulating barriers, preventing objects from entering material exposed to heat and oxygen in the air.

SILK FIBROIN FILMS CRYSTALLIZED BY MULTIWALLED CARBON NANOTUBES

2008 ◽  
Vol 22 (09n11) ◽  
pp. 1807-1812 ◽  
Author(s):  
H.-S. KIM ◽  
W.-I. PARK ◽  
Y. KIM ◽  
H.-J. JIN
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Silk Fibroin ◽  
Composite Films ◽  
Tensile Modulus ◽  
Multiwalled Carbon ◽  
Regenerated Silk Fibroin ◽  
Silk Films ◽  
Β Sheet

Silk films prepared from regenerated silk fibroin are normally stabilized by β-sheet formation through the use of solvents (methanol, water etc.). Herein, we report a new method of preparing water-stable films without a β-sheet conformation from regenerated silk fibroin solutions by incorporating a small amount (0.2 wt%) of multiwalled carbon nanotubes (MWCNTs). To extend the biomaterial utility of silk proteins, forming water-stable silk-based materials with enhanced mechanical properties is essential. Scanning electron microscopy and transmission electron microscopy were used to observe the morphology of the MWCNT-incorporated silk films. The wide-angle X-ray diffraction provided clear evidence of the crystallization of the silk fibroin induced by MWCNT in the composite films without any additional annealing processing. The tensile modulus and strength of the composite films were improved by 108% and 51%, respectively, by the incorporation of 0.2 wt% of MWCNTs, as compared with those of the pure silk films. The method described in this study will provide an alternative means of crystallizing silk fibroin films without using an organic solvent or blending with any other polymers, which may be important in biomedical applications.

scholarly journals Surface Properties of Silica–MWCNTs/PDMS Composite Coatings Deposited on Plasma Activated Glass Supports

2021 ◽  
Vol 11 (19) ◽  
pp. 9256
Author(s):  
Michał Chodkowski ◽  
Iryna Ya. Sulym ◽  
Konrad Terpiłowski ◽  
Dariusz Sternik
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Multiwalled Carbon Nanotubes ◽  
Composite Coatings ◽  
Thermal Analyses ◽  
Sol Gel ◽  
Visible Range ◽  
Multiwalled Carbon ◽  
Scanning Electron

In this paper, we focus on fabrication and physicochemical properties investigations of silica–multiwalled carbon nanotubes/poly(dimethylsiloxane) composite coatings deposited on the glass supports activated by cold plasma. Air or argon was used as the carrier gas in the plasma process. Multiwalled carbon nanotubes were modified with poly(dimethylsiloxane) in order to impart their hydrophobicity. The silica–multiwalled carbon nanotubes/poly(dimethylsiloxane) nanocomposite was synthesized using the sol–gel technique with acid-assisted tetraethyl orthosilicate hydrolysis. The stability and the zeta potential of the obtained suspension were evaluated. Then, the product was dried and used as a filler in another sol–gel process, which led to the coating application via the dip-coating method. The substrates were exposed to the hexamethyldisilazane vapors in order to improve their hydrophobicity. The obtained surfaces were characterized by the wettability measurements and surface free energy determination as well as optical profilometry, scanning electron microscopy, and transmittance measurements. In addition, the thermal analyses of the carbon nanotubes as well as coatings were made. It was found that rough and hydrophobic coatings were obtained with a high transmittance in the visible range. They are characterized by the water contact angle larger than 90 degrees and the transmission at the level of 95%. The X-ray diffraction studies as well as scanning electron microscopy images confirmed the chemical and structural compositions of the coatings. They are thermally stable at the temperature up to 250 °C. Moreover, the thermal analysis showed that the obtained composite material has greater thermal resistance than the pure nanotubes.

Covalent functionalization of multiwalled carbon nanotubes with super-hydrophobic property

2018 ◽  
Vol 38 (6) ◽  
pp. 537-543 ◽  
Author(s):  
Minghua Li ◽  
Zhiyuan Xu ◽  
Jinyang Chen ◽  
San-E Zhu
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Chemical Interaction ◽  
Hydrophobic Property ◽  
Covalent Functionalization ◽  
Multiwalled Carbon ◽  
Surface Contact Angle ◽  
Loading Ratio ◽  
Functionalized Mwcnts

AbstractSurface covalent functionalization of multiwalled carbon nanotubes (MWCNTs) is carried out by coupling of isocyanate-decorated MWCNTs with hydroxyl-terminated polydimethylsiloxane (HTPS), resulting in the formation of functionalized MWCNTs. Thermogravimetry analysis (TGA) of functionalized MWCNTs-1,2,3 exhibits the similar peaks in the temperature range of 200–500°C, which all correspond to the degradation of chemically grafted polyurethane on the nanotube surface. Field emission scanning electron microscopy (FE-SEM) reveals that as the polyurethane grafted onto the surface of MWCNTs loading ratio increased, the surface roughness of the MWCNTs is reduced. The chemical interaction of HTPS with isocyanate-decorated nanotube surface using the grafting-to strategy in a one-step process is confirmed by Fourier transform infrared spectroscopy (FT-IR). The surface contact angle of MWCNTs-3 with the largest content of polyurethane reached 171°, indicating that the surface covered with low surface energy polyurethane shows a super-hydrophobic property. The good dispersion of polyurethane-functionalized MWCNT-3, particularly at high content in the NR nanocomposites, is evidenced from transmission electron microscopy (TEM).

Morphology and thermal properties of nanocomposites based on chiral poly(ester-imide) matrix reinforced by vitamin B1 functionalized multiwalled carbon nanotubes

2016 ◽  
Vol 51 (16) ◽  
pp. 2291-2300 ◽  
Author(s):  
Shadpour Mallakpour ◽  
Samaneh Soltanian
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Multiwalled Carbon Nanotubes ◽  
Vitamin B1 ◽  
Multiwalled Carbon ◽  
Transmission Electron ◽  
Functionalized Multiwalled Carbon Nanotubes ◽  
Scanning Electron

Chemical functionalization of carboxylated multiwalled carbon nanotubes with vitamin B1 was carried out under ultrasonic irradiation. The functionalized nanotubes were embedded in a chiral and biodegradable poly(ester-imide) to prepare multiwalled carbon nanotubes reinforced polymer nanocomposites. Optically active poly(ester-imide) was synthesized by step-growth polymerization of aromatic diol and amino acid based diacid. The vitamin B1 functionalized multiwalled carbon nanotubes and the resulting nanocomposites were examined using Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction, transmission electron microscopy, and field-emission scanning electron microscopy. Thermogravimetric analysis results indicated that temperature at 10% weight loss was increased from 409℃ for pure PEI to 419℃, 427℃, and 430℃ for nanocomposites containing 5%, 10%, and 15% functionalized multiwalled carbon nanotubes, respectively. The Fourier-transform scanning electron microscopy and transmission electron microscopy images exhibited that the functionalized multiwalled carbon nanotubes were separated individually and enwrapped by polymer chains.

scholarly journals One-Step Route to Synthesize Multiwalled Carbon Nanotubes Filled with MgO Nanorods

2010 ◽  
Vol 2010 ◽  
pp. 1-5 ◽  
Author(s):  
Jing Liu ◽  
Chunli Guo ◽  
Xiaojian Ma ◽  
Changhui Sun ◽  
Fengxia Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Transmission Electron Microscopy ◽  
Multiwalled Carbon Nanotubes ◽  
Multiwalled Carbon ◽  
X Ray ◽  
Transmission Electron ◽  
Good Crystallinity ◽  
One Step ◽  
Walled Cnts

Multiwalled carbon nanotubes filled with MgO nanorods were synthesized through the reaction of ethanol and Mg powder in the presence ofTiO2at 400C°. X-ray powder diffraction indicated that the sample was composed of graphite and cubic MgO. Transmission electron microscopy studies showed that multi-walled CNTs with the outer diameters of 70–130 nm were filled with discontinuous MgO nanorods whose diameter was in the range of 25–40 nm. The ratios of the band intensities(ID/IG=0.67)in Raman spectrum implied that carbon nanotubes had good crystallinity. The influence of correlative reaction factors on the morphology of the sample and the possible formation mechanism were discussed.

scholarly journals Study on the Synergies of Nanoclay and MWCNTs to the Flame Retardant and Mechanical Properties of Epoxy Nanocomposites

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Tuan Anh Nguyen
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Adverse Effects ◽  
Flame Retardant ◽  
Organic Compounds ◽  
Flame Retardants ◽  
Nanocomposite Materials ◽  
Negative Effects ◽  
Multiwalled Carbon ◽  
Flame Retardant Properties

Modern flame retardants are organic compounds containing halogen or phosphorus groups and are not always well dispersed in polymers. Thus, by using a small amount of nanoclay and multiwalled carbon nanotubes (MWCNTs), they can significantly reduce the number of conventional flame retardant additives, making the material with optimal flame retardant properties. Conventional flame retardants always have some negative effects on the mechanical properties of the polymer substrate, so by using nanoclay and MWCNTs, those adverse effects can be minimized and overcome. In this work, in order to improve the mechanical properties and flame retardant of nanocomposite materials, nanoclay I.30E and MWCNTs are mixed into epoxy, with the selected percentage of 2% and 0.02% by weight, respectively, stirring mechanically for 7, 8, and 9 hours at 3000 rpm at 80°C, then performing ultrasonic vibration for 6 hours at 65°C.

Sign in / Sign up

Export Citation Format

Share Document