Indole-based high-performance polymeric materials with enhanced mechanical and thermal properties via cation-π interaction

2019 ◽  
Vol 32 (6) ◽  
pp. 662-668
Author(s):  
Xiao-fang Guan ◽  
Cong Liao ◽  
Li Yang ◽  
Guan-jun Chang
Keyword(s):  
Thermal Stability ◽  
Heat Resistance ◽  
Self Assembly ◽  
High Performance ◽  
Mechanical Performance ◽  
Polymeric Materials ◽  
Design Strategy ◽  
Mechanical And Thermal Properties ◽  
Innovative Design ◽  
High Performance Polymers

The preparation of high-performance polymeric materials with both excellent overall mechanical properties and heat resistance remains a considerable challenge. Inspired by the delicate self-assembly processes in nature, a facile strategy is reported for the preparation of high-performance polymeric materials with enhanced mechanical strength and improved thermal stability. In this instance, we successfully constructed a cation- π cross-linked polyimide (Na-poly(aryl indole) imide (Na-PINI)) film with enhanced mechanical performance and heat resistance (∼490°C). This work presents an innovative design strategy for realizing robust polymeric materials with integrated strength and thermal stability; the cation- π interaction is demonstrated to be a new method that may achieve many useful properties for high-performance polymers.

High-Performance Silica/Epoxy Resin Hybrid Materials Prepared by In Situ Sol-Gel Process

2011 ◽  
Vol 308-310 ◽  
pp. 804-807
Author(s):  
Jian Jiao ◽  
Liang Zou ◽  
Pan Bo Liu ◽  
Guang Li Wu
Keyword(s):  
Electron Microscopy ◽  
Heat Resistance ◽  
Epoxy Resin ◽  
Hybrid Materials ◽  
High Performance ◽  
Mechanical Performance ◽  
Sol Gel ◽  
Mechanical And Thermal Properties ◽  
In Suit ◽  
Gel Temperature

Silica/epoxy resin hybrid materials are prepared with tetraethylorthosilicate (Si(OC2H5)4, TEOS) and γ-aminoproplytriethyoxysiliane (H2N(CH2)3Si(OC2H5)3, APTES) as the silica sources, epoxy resin as the polymer matrix, by the means of in-suit sol-gel method. The dosages of TEOS and APTES in preparation of hybrid materials, and the sol-gel temperature for silica resources are discussed to make sure of the influence of the structure and properties on hybrid materials. The dispersion of Silica in the epoxy resin are examined by transmission electron microscopy (TEM).The image of fracture surfaces of hybrid materials are examined by scanning electron microscopy (SEM). The glass transmission temperatures (Tg) are tested by differential scanning calorimeter (DSC) to characterize the heat resistance of hybrid materials. The optimum mechanical performance and heat resistance for silica/epoxy resin hybrid materials are achieved with 3wt% TEOS and APTES 2wt% employed in this materials when sol-gel temperature is 60°C. In general, the mechanical and thermal properties of the hybrid materials were improved greatly as compared with the pure epoxy resin.

A Recommender System for Inverse Design of Polycarbonates and Polyesters

2020 ◽  
Author(s):  
Nathaniel Park ◽  
Dmitry Yu. Zubarev ◽  
James L. Hedrick ◽  
Vivien Kiyek ◽  
Christiaan Corbet ◽  
...  
Keyword(s):  
Ring Opening ◽  
High Performance ◽  
Recommendation System ◽  
Polymeric Materials ◽  
Monomer Conversion ◽  
Design Strategy ◽  
Ring Opening Polymerization ◽  
Inverse Design ◽  
False Negatives ◽  
Accelerate Development

The convergence of artificial intelligence and machine learning with material science holds significant promise to rapidly accelerate development timelines of new high-performance polymeric materials. Within this context, we report an inverse design strategy for polycarbonate and polyester discovery based on a recommendation system that proposes polymerization experiments that are likely to produce materials with targeted properties. Following recommendations of the system driven by the historical ring-opening polymerization results, we carried out experiments targeting specific ranges of monomer conversion and dispersity of the polymers obtained from cyclic lactones and carbonates. The results of the experiments were in close agreement with the recommendation targets with few false negatives or positives obtained for each class.<br>

Semi-bio-based aromatic polyamides from 2,5-furandicarboxylic acid: toward high-performance polymers from renewable resources

RSC Advances ◽  
2016 ◽  
Vol 6 (90) ◽  
pp. 87013-87020 ◽  
Author(s):  
Kaiju Luo ◽  
Yan Wang ◽  
Junrong Yu ◽  
Jing Zhu ◽  
Zuming Hu
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Molecular Weight ◽  
High Molecular Weight ◽  
Renewable Resources ◽  
High Performance ◽  
Good Thermal Stability ◽  
Aromatic Polyamides ◽  
High Performance Polymers ◽  
Furandicarboxylic Acid

Aromatic furanic polyamides with relatively high molecular weight were synthesized, and good thermal stability and mechanical properties were demonstrated.

High-performance polymer composites with enhanced mechanical and thermal properties from cyanate ester/benzoxazine resin and short Kevlar/glass hybrid fibers

2018 ◽  
Vol 31 (6) ◽  
pp. 719-732 ◽  
Author(s):  
Abdeldjalil Zegaoui ◽  
Mehdi Derradji ◽  
Abdul Qadeer Dayo ◽  
Aboubakr Medjahed ◽  
Hui-yan Zhang ◽  
...  
Keyword(s):  
Thermal Properties ◽  
High Performance ◽  
Hybrid Composites ◽  
Glass Fibers ◽  
Functional Materials ◽  
Polymeric Materials ◽  
Cyanate Ester ◽  
Resin Matrix ◽  
Mechanical And Thermal Properties ◽  
Hybrid Fibers

The investigation and design of new polymeric materials with an astonishing combination of properties are nowadays of great importance to facilitate the manufacturing process of high-quality products intended to be utilized in different applications and technical fields. For this intent, novel high-performance blend composites composed of the cyanate ester/benzoxazine resin blend reinforced by different proportions of silane-surface modified Kevlar and glass fibers were successfully fabricated by a compression molding technique and characterized by different experimental tests. The mechanical test results revealed that the bending and impact strength properties were considerably improved when increasing the amount of the hybrid fibers. The studied materials also presented excellent thermal stabilities as compared to the unfilled blend’s properties. With respect to the properties of the reinforcing systems, these improvements seen in either the mechanical or thermal properties could be due to the good dispersion as well as excellent adhesion of the reinforcing fibers inside the resin matrix, which were further evidenced by the Fourier transform infrared spectroscopy and scanning electron microscopy results. Consequently, the improved mechanical and thermal properties promote the use of the fabricated hybrid composites in domestic and industrial applications requiring functional materials with advanced properties for aerospace and military applications.

Mechanical and thermal properties of polyoxymethylene-matrix composites filled with multi-walled carbon nanotubes-coated milled glass fiber

2019 ◽  
Vol 54 (15) ◽  
pp. 1961-1976
Author(s):  
Xu Xiangmin ◽  
Hongxiang Zhang ◽  
Tong Beibei ◽  
Li Binjie ◽  
Yudong Zhang
Keyword(s):  
Carbon Nanotubes ◽  
Thermal Stability ◽  
Thermal Properties ◽  
Electron Microscope ◽  
Glass Fiber ◽  
Crystallization Temperature ◽  
High Performance ◽  
Multiwall Carbon Nanotubes ◽  
Fiber Surface ◽  
Mechanical And Thermal Properties

The advanced multifunctional filler has become one of the main challenges in developing high-performance polymer composites. In this study, the acid-treated multiwall carbon nanotubes (MWCNTs) were adhered to the surface of milled glass fiber under the combined effect of 3-aminopropyltriethyloxy silane and tetraethyl orthosilicate to fabricate a hierarchical fiber (MWCNTs-MGF). The morphologies of the hierarchical fibers were characterized using field-emission scanning electron microscope and transmission electron microscope, which showed evidence of a coating layer of MWCNTs on each fiber surface. The MWCNTs-MGF was employed as a multifunctional filler to prepare polyoxymethylene-based composites using a twin-screw extruder by melt blending. The obtained composites exhibited improved mechanical and thermal properties. The composite tensile strength and notched impact strength and Young's modulus increased by 10%, 32%, and 32%, respectively, as the MWCNTs-MGF content varies from 0 to 10 wt.%. Meanwhile, the reinforcing and toughing mechanisms of MWCNTs-MGF were also elaborated by analyzing the interfacial adhesion and fracture morphologies of the composites. Moreover, the study on thermal stability and crystallization behavior indicated that the polyoxymethylene/MWCNTs-MGF composites had higher thermal stability, crystallization temperature, and crystallinity as compared to the polymer matrix. The improvement of thermal stability originates from the unique surface structure of MWCNTs-MGF, while the increase in crystallization temperature and crystallinity is due to the strong heterogeneous nucleation ability of the hierarchical fibers.

Heat-resistant and photoluminescent indole-based poly(ether sulfone)s

2017 ◽  
Vol 30 (4) ◽  
pp. 475-479 ◽  
Author(s):  
Wenxuan Wei ◽  
Li Yang ◽  
Guanjun Chang
Keyword(s):  
Thermal Stability ◽  
High Performance ◽  
Proton Nuclear Magnetic Resonance ◽  
Resonance Spectroscopy ◽  
Condensation Polymerization ◽  
High Glass Transition Temperature ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
High Performance Polymers ◽  
Good Agreement

Indole-based poly(ether sulfone)s (PINESs), as novel high-performance polymers, have been obtained by the condensation polymerization of 4-hydroxyindole and hydroquinone with activated difluoro monomers via a catalyst-free nucleophilic substitution reaction. The structures of the polymers are characterized by means of Fourier transform infrared and proton nuclear magnetic resonance spectroscopy, and the results show good agreement with the proposed structures. Differential scanning calorimetry and thermogravimetric analysis measurements exhibit that polymers possess high glass transition temperature ( Tgs > 245°C) and good thermal stability with high decomposition temperatures ( Tds > 440°C). In addition, due to their special structure, PINESs are endowed with significantly strong photonic luminescence in N, N-dimethylformamide.

Mechanical and Thermal Properties of PLA Melt Blended with High Molecular Weight PEG Modified with Peroxide and Organo-Clay

2017 ◽  
Vol 751 ◽  
pp. 337-343 ◽  
Author(s):  
Chanchai Thongpina ◽  
Chaiwat Tippuwanan ◽  
Kwanchai Buaksuntear ◽  
Teerani Chuawittayawuta
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Molecular Weight ◽  
High Molecular Weight ◽  
Mechanical Performance ◽  
Organic Peroxide ◽  
Degree Of Crystallinity ◽  
Poly Lactic Acid ◽  
Mechanical And Thermal Properties ◽  
Cloisite 30B

The thermal and mechanical properties of poly (lactic acid) blended with high molecular weight PEG, i.e. PEG1000 and PEG6000 were compared. The contents of PEG added were 10, 12.5 and 15 % by weight, with respect to PLA. The PLA/PEG blends were modified by addition of organic peroxide in order to induced crosslinking. Addition of organic modified montmorrillonite (Cloisite 30B, C30B) was also performed in order to modify mechanical performance of PLA/PEG blends. C30B was prepared via master batch in PLA. Morphology, crystallization, thermal stability and mechanical properties of the blends were investigated using SEM, DSC, TGA and universal testing macine, respectively. Morphology of cryogenic fracture surface showed smooth brittle surface. PEG1000 well plasticized PLA where as PEG6000 shows better thermal stability and mechanical properties. The presence of PEG induced PLA to perform cold crystallization. Tm in PLA was slightly changed whereas degree of crystallinity of PLA was improved by PEG but slightly decreased by peroxide. The thermal stability of PLA was enhanced with the addtion of PEG6000. The toughening of PLA was confirmed by the increment of elongation at break. The exfoliation of C30B was interfered by the crosslink PLA. Then tensile strength of PLA/PEG/C30B/Luperox101 was then suppressed. The optimum properties, in term of toughening and thermal stability, were found at PEG content of 10 % rather than 15% by weight, for both PEG1000 and PEG6000.

scholarly journals In situ three-dimensional spider web construction and mechanics

2021 ◽  
Vol 118 (33) ◽  
pp. e2101296118
Author(s):  
Isabelle Su ◽  
Neosha Narayanan ◽  
Marcos A. Logrono ◽  
Kai Guo ◽  
Ally Bisshop ◽  
...  
Keyword(s):  
Self Assembly ◽  
High Performance ◽  
Mechanical Performance ◽  
Three Dimensional ◽  
Hierarchical Structures ◽  
Spider Webs ◽  
Spider Web ◽  
Web Geometry ◽  
Under Construction ◽  
The Web

Spiders are nature’s engineers that build lightweight and high-performance web architectures often several times their size and with very few supports; however, little is known about web mechanics and geometries throughout construction, especially for three-dimensional (3D) spider webs. In this work, we investigate the structure and mechanics for a Tidarren sisyphoides spider web at varying stages of construction. This is accomplished by imaging, modeling, and simulations throughout the web-building process to capture changes in the natural web geometry and the mechanical properties. We show that the foundation of the web geometry, strength, and functionality is created during the first 2 d of construction, after which the spider reinforces the existing network with limited expansion of the structure within the frame. A better understanding of the biological and mechanical performance of the 3D spider web under construction could inspire sustainable robust and resilient fiber networks, complex materials, structures, scaffolding, and self-assembly strategies for hierarchical structures and inspire additive manufacturing methods such as 3D printing as well as inspire artistic and architectural and engineering applications.

TOUGHMET 2

Alloy Digest ◽  
2013 ◽  
Vol 62 (5) ◽  
Keyword(s):  
Heat Treatment ◽  
Thermal Stability ◽  
Fracture Toughness ◽  
Wear Resistance ◽  
High Performance ◽  
Mechanical Performance ◽  
High Thermal Stability ◽  
Lead Free ◽  
Plain Bearing ◽  
Ni Alloy

Abstract ToughMet 2 is a high performance, wrought, heat treatable, lead-free strip Cu-Ni alloy that imparts superior mechanical performance and high thermal stability to plain bearing applications. Parts are easily formed and they can be machined either before or after heat treatment. ToughMet alloys are a line of spinodal hardened Cu-Ni anti-galling alloys for bearings capable of performing with a variety of shafting materials and lubricants. The alloys combine a high lubricity with wear resistance in these severe loading conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming and machining. Filing Code: Cu-724. Producer or source: Materion Brush Performance Alloys. Originally published September 2004, revised May 2013.

Polymeric Alternatives in Manufacturing Removable Partial Dentures

2017 ◽  
Vol 54 (4) ◽  
pp. 754-756
Author(s):  
Lavinia Cosmina Ardelean ◽  
Cristina Maria Bortun ◽  
Angela Codruta Podariu ◽  
Laura Cristina Rusu
Keyword(s):  
High Performance ◽  
Polymeric Materials ◽  
New Materials ◽  
Alternative Technologies ◽  
High Performance Polymers ◽  
Lower Weight ◽  
Light Curing

Traditionally, removable partial dentures consist of a metallic framework, covered by acrylic saddles, which support acrylic or ceramic teeth. Because their shortcomings, new classes of resins/macromolecular compounds which promise better quality are nowadays available for manufacturing removable partial dentures: urethane-based resins, polyamides, acetal resins, high-performance polymers. Manufacturing these new materials implies alternative technologies like: injection, milling, light-curing. Using these alternative polymeric materials results in dentures with better resistance, elasticity, appearance and lower weight, which provide much more comfort to the patient.

Sign in / Sign up

Export Citation Format

Share Document