Energy absorbed ability and damage analysis for honeycomb sandwich material of bio-inspired micro aerial vehicle under low velocity impact

2020 ◽  
pp. 095440622097542
Author(s):  
Jianxun Du ◽  
Peng Hao ◽  
Mabao Liu ◽  
Rui Xue ◽  
Lin’an Li
Keyword(s):  
Honeycomb Structure ◽  
Low Velocity Impact ◽  
Parameter Study ◽  
Low Velocity ◽  
Micro Aerial Vehicle ◽  
Thin Walled Structures ◽  
Wide Range ◽  
Aerial Vehicle ◽  
Thin Walled ◽  
The Impact

Because of the advantages of light weight, small size, and good maneuverability, the bio-inspired micro aerial vehicle has a wide range of application prospects and development potential in military and civil areas, and has become one of the research hotspots in the future aviation field. The beetle’s elytra possess high strength and provide the protection of the abdomen while being functional to guarantee its flight performance. In this study, the internal microstructure of beetle’s elytra was observed by scanning electron microscope (SEM), and a variety of bionic thin-walled structures were proposed and modelled. The energy absorption characteristics and protective performance of different configurations of thin-walled structures with hollow columns under impact loading was analyzed by finite element method. The parameter study was carried out to show the influence of the velocity of impactor, the impact angle of the impactor and the wall thickness of honeycomb structure. This study provides an important inspiration for the design of the protective structure of the micro aerial vehicle.

scholarly journals Effect of Harsh Environmental Conditions on the Impact Response of Carbon Composites with Filled Matrix by Cork Powder

2021 ◽  
Vol 11 (16) ◽  
pp. 7436
Author(s):  
Marco P. Silva ◽  
Paulo Santos ◽  
João Parente ◽  
Sara Valvez ◽  
Paulo N. B. Reis
Keyword(s):  
Exposure Time ◽  
Epoxy Matrix ◽  
Mechanical Performance ◽  
Maximum Load ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Wide Range ◽  
Hostile Environments ◽  
The Impact

Composites are used in a wide range of engineering applications, as a result, exposure to hostile environments is rather common and its mechanical properties degradation is unavoidable. It is necessary to have a complete understanding of the impact of hostile environments on mechanical performance, namely critical solicitations as low velocity impacts. Therefore, this work intends to analyse the low velocity impact response of a carbon fibre/epoxy composite, and a similar architecture with an epoxy matrix filled with cork, after immersion into different solutions: diesel, H2SO4, HCl, NaOH, distilled water, seawater, and seawater at 60 °C. These solutions significantly affected the impact properties. In this context, the maximum load, maximum displacement, and restored energy behaviour were studied to understand the influence of exposure time. It was possible to conclude that such impact parameters were significantly affected by the solutions, where the exposure time proved to be determinant. The benefits of cork on the perforation threshold were investigated, and this parameter increased when the epoxy matrix was filled with cork. Finally, cork filled epoxy laminates also show less variation in maximum load and recovered energy than carbon/epoxy laminates.

scholarly journals Fabrication of woven honeycomb structures for advanced composites

2018 ◽  
Vol 1 (3-4) ◽  
pp. 114-119 ◽  
Author(s):  
Guldemet Basal Bayraktar ◽  
◽  
Ata Kianoosh ◽  
Derya Bilen ◽  
◽  
...  
Keyword(s):  
Testing Machine ◽  
Honeycomb Structure ◽  
Impact Testing ◽  
Woven Fabric ◽  
Low Velocity Impact ◽  
Impact Behavior ◽  
Low Velocity ◽  
Detection Range ◽  
Force Contact ◽  
The Impact

A honeycomb woven fabric was designed and produced on a sampling loom. After weaving cells in the fabric were opened by polytetrafluoroethylene (PTFE) sticks and an epoxy resin was applied to fabric. For comparison half of the fabric sample was impregnated with resin without opening the cells. Resulting fabric samples were subjected to low-velocity impact test by using drop weight impact testing machine, CEAST Fractovis Plus – 7526.000. To evaluate the impact behavior of the samples the contact force, contact time, deflection, and absorbed energy values were recorded by data acquisition system (DAS). The energy absorbed by honeycomb structure was around 7 Joule. The energy absorbed by flat sample, on the other hand, was too low and out of the detection range of the testing equipment.

scholarly journals Energy absorption capability of laminated plates made of fully thermoplastic composite

2018 ◽  
Vol 232 (8) ◽  
pp. 1389-1401 ◽  
Author(s):  
Simonetta Boria ◽  
Alessandro Scattina
Keyword(s):  
Energy Absorption ◽  
Laminated Plates ◽  
Thermoplastic Composite ◽  
Low Velocity Impact ◽  
Thermoplastic Composites ◽  
Fibre Reinforcement ◽  
Low Velocity ◽  
Wide Range ◽  
The Matrix ◽  
The Impact

The behaviour of composites materials, made of synthetic fibres embedded in a thermoplastic resin, subjected to low velocity impacts, was largely studied in the past. However, in the last years, the use of thermoplastic composites has been increased due to the considerable advantages in terms of recyclability of this family of materials. Thermoplastic composites are composed of polymers with different material’s structure if compared to the more traditional thermoset composite. Consequently, the behaviour of these materials can be different in some loading conditions. Moreover, considering the wide range of thermoplastic composites that have been developed in the last years, the study of the behaviour of these materials, in case of impact, has not been yet widely analysed, in particular considering materials where both the matrix and the reinforcement are made of thermoplastic. In this perspective, the goal of this work is to study the behaviour of a new thermoplastic composite (PURE thermoplastic) in conditions of low velocity impact. In this material, the matrix and the fibre reinforcement are made of polypropylene both. The paper presents the results of an experimental investigation. In particular, a series of impact tests with a drop dart equipment have been carried out on laminates made of PURE thermoplastic. Laminates with different thicknesses have been taken into consideration. The influence of the impact conditions on the material’s behaviour has been investigated and the capability of energy absorption has been studied. The PURE thermoplastic showed a different behaviour in terms of energy absorption and damage mechanisms if compared to the composites presented in the literature. The thickness of the laminate has had influence on the deformation and the damage mechanism of the specimens: with low thickness, the perforation of the specimen has been obtained, whereas, with the higher thickness, the specimens have shown a ductile behaviour and extended plasticity without crack tip. The contact force between the dart and the specimen has been influenced by the energy level of the impact, but with an opposite trend if compared to that of the composites studied in the literature.

Experimental and numerical behaviors of GFRP laminates under low velocity impact

2020 ◽  
Vol 54 (21) ◽  
pp. 2999-3007
Author(s):  
Hüseyin E Yalkın ◽  
Ramazan Karakuzu ◽  
Tuba Alpyıldız
Keyword(s):  
Contact Force ◽  
Impact Energy ◽  
Damage Mechanics ◽  
Matrix Material ◽  
Impact Testing ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Wide Range ◽  
The Impact

The aim of the study is to investigate the behavior of laminated composites under low velocity impact both experimentally and numerically. With this aim, the effects of wide range impact energy values between 10 J and 60 J were evaluated experimentally and numerically for the laminate of [±45/(0/90)2]S oriented unidirectional E-glass as reinforcing material and epoxy resin for matrix material. Different impactor velocities were used to maintain the impact energy values and experimental impact tests were generated with drop weight impact testing machine at room temperature. Numerical simulations were performed using LS-DYNA finite element analysis software with a continuum damage mechanics-based material model MAT058. Contact force between impactor and laminate, and transverse deflection at the center of laminate results were obtained as a function of time and used to plot contact force–time curves, contact force–deflection curves and absorbed energy-impact energy curves. Also, delamination area was examined. Finally, numerical results were compared with experimental results and a good correlation between them was observed.

Characterization and Scaling of Low Velocity Impact Response of Structures With Local Plastic Deformation: Implications for Design

2012 ◽  
Author(s):  
Andreas P. Christoforou ◽  
Ahmet S. Yigit ◽  
Majed Majeed
Keyword(s):  
Boundary Conditions ◽  
Early Stage ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Model Parameters ◽  
Analytical Prediction ◽  
Low Velocity ◽  
Adequate Model ◽  
Wide Range ◽  
The Impact

This paper presents a methodology for the characterization and scaling of response of structures having different shapes, sizes, and boundary conditions that are under impact by blunt objects through a characterization diagram. The diagram is constructed from an analytical functional relationship of the normalized maximum impact force and three non-dimensional parameters, namely the ‘Relative Stiffness’, ‘Relative Mobility,’ and ‘Effective Mass Ratio’. The efficacy of this diagram, which is developed using simple structural models, is demonstrated by FE simulations of more complicated and realistic structures and boundary conditions (clamped, stiffened plates and cylindrical panels). All the necessary parameters needed for characterization are determined using FE models simulating real-world experiments. The characterization method is validated for a wide range of impact parameters that cover the entire dynamic spectrum. It is expected that by determining the model parameters for various engineering structural elements and support conditions, the impact response and subsequent damage may be predicted in an early stage using the characterization diagram. The diagram can also be used to assess the accuracy of simple lumped parameter models and to provide clear guidelines for the choice of an adequate model for a given impact situation. As a result, the characterization diagram and simple models can be used for both the evaluation of finite element and other solutions, and as guides in the design of experiments and in scaling experimental results. The characterization diagram can be used as a powerful analytical prediction tool in various stages of design of complex structures subject to impact such as, initial design, testing and commissioning.

Parameter Study of Numerical Analysis on Low-Velocity Impact of GLARE 5 Fibre-Metal Laminates

2014 ◽  
Vol 1033-1034 ◽  
pp. 515-518
Author(s):  
Yun Wan ◽  
Xin Lei Huang ◽  
Li Min Zhou
Keyword(s):  
Low Velocity Impact ◽  
Parameter Study ◽  
Low Velocity ◽  
Fibre Metal Laminates ◽  
Impact Performance ◽  
Interface Delamination ◽  
User Material Subroutine ◽  
Fibre Metal ◽  
The Impact ◽  
Flow Stress Model

The impact performance play an important role to marine material. A numerical methodology including user material subroutine VUMAT, Johnson–Cook flow stress model and surface-based cohesive behaviour is employed to simulate the damage of the impact of GLARE 5 fibre-metal laminates (FML). Not only histories of absorbed energy, deflection, contact force are presented in our simulation, but the interface delamination is also investigated. After parameter study, suitable fracture energy in surface-based cohesive behaviour was found.

Ballistic performance of quasi-isotropic CFRP laminates under low velocity impact

2021 ◽  
pp. 002199832110238
Author(s):  
Gyanesh Patnaik ◽  
Anshul Kaushik ◽  
Abhishek Rajput ◽  
Guru Prakash ◽  
R Velmurugan
Keyword(s):  
Numerical Model ◽  
Experimental Results ◽  
Low Velocity Impact ◽  
Fiber Reinforced ◽  
Low Velocity ◽  
Ballistic Performance ◽  
Velocity Impact ◽  
Cfrp Laminates ◽  
Wide Range ◽  
The Impact

The perforation characteristics of fiber reinforced laminates is crucial for the design of protective civil and military structures. This paper investigates the perforation characteristics (ballistic limit velocity, residual velocity, perforation energy) of cross ply and quasi-isotropic (QI) carbon fiber reinforced polymer (CFRP) laminates under the impact of a rigid conical steel bullet. The influence of thickness and ply orientation on these characteristics is also studied for a wide range of velocities. The perforation characteristics of these laminates were determined, numerically as well as experimentally. A numerical model is developed by using Hashin damage model to understand the behavior of laminates under high velocity impact. The accuracy of the model is assessed by comparing its prediction with experimental results of cross ply laminates. Then, impact perforation study of different possible configurations made of quasi-isotropic (QI) CFRP laminates, oriented at 0°, 90°, 45° and −45° directions are carried out with the help of validated numerical model. The perforation characteristics predicted with the help of numerical model is in good agreement with the experimental results. Optimal configuration is achieved in terms of energy absorption and damage resistance for better performance under impact loading.

Response and failure modes of biaxial warp-knitted flexible composite subject to low-velocity impact

2021 ◽  
pp. 152808372110154
Author(s):  
Ziyu Zhao ◽  
Tianming Liu ◽  
Pibo Ma
Keyword(s):  
Impact Energy ◽  
Linear Density ◽  
Failure Modes ◽  
Impact Response ◽  
Low Velocity Impact ◽  
Minor Effect ◽  
Low Velocity ◽  
Velocity Impact ◽  
Flexible Composites ◽  
The Impact

In this paper, biaxial warp-knitted fabrics were produced with different high tenacity polyester linear density and inserted yarns density. The low-velocity impact property of flexible composites made of polyurethane as matrix and biaxial warp-knitted fabric as reinforcement has been investigated. The effect of impactor shape and initial impact energy on the impact response of flexible composite is tested. The results show that the initial impact energy have minor effect on the impact response of the biaxial warp-knitted flexible composites. The impact resistance of flexible composite specimen increases with the increase of high tenacity polyester linear density and inserted yarns density. The damage morphology of flexible composite materials is completely different under different impactor shapes. The findings have theoretical and practical significance for the applications of biaxial warp-knitted flexible composite.

Low Velocity Impact Resistance of CPVC Pipes Exposed to Natural Outdoor Weathering Conditions

2012 ◽  
Vol 445 ◽  
pp. 959-964
Author(s):  
Z. Khan ◽  
Necar Merah ◽  
A. Bazoune ◽  
S. Furquan
Keyword(s):  
Impact Resistance ◽  
Outdoor Exposure ◽  
Impact Testing ◽  
Low Velocity Impact ◽  
Pipe Material ◽  
Low Velocity ◽  
Impact Energies ◽  
The Impact ◽  
Impact Events ◽  
Outdoor Weathering

Low velocity drop weight impact testing of CPVC pipes was conducted on 160 mm long pipe sections obtained from 4-inch (100 mm) diameter schedule 80 pipes. Impact test were carried out for the base (as received) pipes and after their exposure to out door natural weathering conditions in Dhahran, Saudi Arabia. The results of the impact testing on the natural (outdoor exposure) broadly suggest that the natural outdoor exposures produce no change in the impact resistance of CPVC pipe material for the impact events carrying low incident energies of 10 and 20J. At the impact energies of 35 and 50J the natural outdoor exposures appear to cause appreciable degradation in the impact resistance of the CPVC pipe material. This degradation is noted only for the longer exposure periods of 12 and 18 months.

Sign in / Sign up

Export Citation Format

Share Document