Measurement and assessment of out-of-round electric locomotive wheels

Author(s):  
Gongquan Tao ◽  
Linfeng Wang ◽  
Zefeng Wen ◽  
Qinghua Guan ◽  
Xuesong Jin

This paper presents a detailed investigation of out-of-round electric locomotive wheels through extensive measurement conducted at field sites. More than 2000 wheels, of seven types of locomotives widely used in China, have been measured since April 2013. The measurement results indicate that two types of freight traffic locomotives suffer serious polygonal wear problems with center wavelengths ranging from 160 to 315 mm. The dominating wavelength is 200 mm. Therefore, the investigations are mainly focused on the two locomotive types. The other types, which are taken for comparison, do not exhibit obvious polygonal wear. However, they exhibited more or less eccentricity. The effect of wheel re-profiling on the wheel polygon is also investigated and discussed. The dominating harmonic orders and center wavelengths after re-profiling are consistent with those before re-profiling at the correct circumstances, if the center wavelength of the polygonal wear is about 200 mm.

2017 ◽  
Vol 56 (6) ◽  
pp. 883-899 ◽  
Author(s):  
Gongquan Tao ◽  
Linfeng Wang ◽  
Zefeng Wen ◽  
Qinghua Guan ◽  
Xuesong Jin

2016 ◽  
Vol 28 (4) ◽  
Author(s):  
Lubomír Kubáček ◽  
Ludmila Kubáčková

An investigation of the deformations of large buildings (bridges, dams, etc.) needs replicated measurements in special types of geodetical networks. They are characterized by two groups of points creating the network; one group is formed by points with stable positions and the other one is formed by points located on the building and characterizing its deformations. A statistical analysis of measurement results is done after each epoch ofmeasurement and also after several epochs. It is of a practical importance to develop an algorithm of estimation which enables us to use the partial results obtained after each epoch for results after several epochs.


2021 ◽  
Vol 4 (2) ◽  
pp. 79
Author(s):  
Elfi Yuliza ◽  
Riska Ekawita ◽  
Vionita Vionita ◽  
Muhammad Khafid Fauzi ◽  
Vera Fuspita Sari ◽  
...  

Keeping an interaction distance between 1 to 2 m is one of the health protocols during the COVID-19 pandemic. This attempt was made to reduce the spread of the Coronavirus. On the other hand, this health protocol activity is often overlooked, whether intentionally or not. According to the mechanism of the Coronavirus spreading in the form of droplets that comes out during communication, sneezing, or coughing, maintaining distance can be the best effort to minimize the transmission of this virus. Therefore, the availability of a simple, accurate and user-friendly physical distancing alarm system could be a solution in the implementation of this health protocol. In this study, a prototype of a physical distancing alarm based on a distance sensor and a microcontroller in the form of an identity card was developed. Several steps are conducted in developing of this system, namely designing the instrumentation system and testing the performance of the system. System performance is tested through variations in the distance and angle of the objects. The measurement results show that the system can detect objects in front of the sensor up to a distance of 2.8m and an angle of  for a distance of 1m. The measurement using different angles of objects was performed for objects on the left and right sides of the sensor. In addition, a warning alarm will be on when the distance of the object exceeds the allowed distance.  


2019 ◽  
Vol 8 (1) ◽  
pp. 1-13
Author(s):  
Mohammad Farhan Qudratullah

Treynor Ratio merupakan model pioner inovatif ukuran kinerja saham yang dikemukakan Jack Treynor pada tahun 1965 yang terdiri atas 3 (tiga) komponen, yaitu return saham, return bebas risiko, dan beta saham. Banyak penelitian mendekati return bebas risiko dengan suku bunga termasuk saat mengukur kinerja saham syariah, sedangkan suku bunga dilarang dalam konsep keuangan islam. Tulisan ini membahas variabel alternatif untuk mendekati return bebas risiko selain dengan suku bunga (BI-Rate), yaitu dengan 4 (empat) pendekatan, yaitu: menghilangkan suku bunga, mengganti dengan zakat rate, mengganti dengan inflasi, dan mengganti dengan gross domestic produc (GDP) pada model Treynor Ratio yang diimplementasikan pada pasar modal syariah di Indonesia periode Januari 2011-Juli 2018. Hasil yang diperoleh adalah terdapat kesesuaian yang sangat tinggi hasil pengukuran model Treynor Ratio dengan suku bunga dengan keempat model lainnya. Namun, model-model tersebut tidak menjamin bahwa saham yang memilki kinerja terbaik pada saat ini akan memilki kinerja terbaik dimasa yang akan datang atau sebaliknya. Dilihat dari kedekatan hasil pengukuran kinerjanya, kelima model Treynor Ratio tersebut dapat dikelompokan jadi 2 (dua), yaitu model dengan suku bunga, model dengan inflasi, dan model dengan GDP sebagai kelompok pertama, sedangkan model tanpa suku bunga dan model dengan zakat-rate sebagai kelompok kedua. [Treynor Ratio is an innovative pioneer model the size of stock performance proposed by Jack Treynor in 1965 which consists of 3 (three) components, namely stock returns, risk free returns, and stock beta. Many studies approach risk-free returns with interest rates, including when measuring the performance of Islamic stocks, while interest rates are prohibited in the concept of Islamic finance. This paper discusses alternative variables to approach risk-free returns other than interest rates (BI-Rate), namely with 4 (four) approaches, namely: eliminating interest rates, changing zakat rates, changing inflation, and substituting gross domestic products (GDP) in the Treynor Ratio model that is implemented in the Islamic capital market in Indonesia for the period January 2011 - July 2018. The results obtained are very high conformity in the measurement results of the Treynor Ratio model with interest rates with the other four models. However, these models do not guarantee that stocks that have the best performance at this time will have the best performance in the future or vice versa. Judging from the closeness of the results of performance measurement, the five Treynor Ratio models can be grouped into 2 (two), namely models with interest rates, models with inflation, and models with GDP as the first group, while models without interest rates and models with zakat-rate as second group.]


2017 ◽  
Vol 10 (1) ◽  
pp. 93-99 ◽  
Author(s):  
Yang Xiong ◽  
Litian Wang ◽  
Doudou Pang ◽  
Wei Zhang ◽  
Fan Zhang ◽  
...  

In this paper, a dual-wideband bandpass filter (BPF) with independently controllable center frequencies (CFs) and wide stopband suppression is presented using a new quintuple-mode resonator (QMR). By applying the classical odd-/even-mode analysis method, the resonant characteristics of the new QMR have been analyzed. It shows that five modes can be excited, and two of them can be employed to form the lower passband, while the other three modes contribute to the higher passband. For verification, a dual-wideband BPF using the new QMR is designed, fabricated, and tested. Experimental results show that the CFs of the dual-wideband BPF centered at 2.96 GHz and 5.695 GHz with 3 dB fractional bandwidths of 27.7 and 23.4%, respectively. In addition, 20-dB suppression in upper-stopband ranges from 2.23 to 4.04f0, where f0 is the center frequency of the first passband. The measurement results are in good agreement with the prediction results.


2021 ◽  
Vol 2101 (1) ◽  
pp. 012023
Author(s):  
Xiao Huang ◽  
Zhenkun Jin ◽  
Qing Shen

Abstract Fiber Bragg Grating (FBG) has been widely used in temperature and strain measurement. Its center wavelength drift is affected by both temperature and strain. The influence of temperature and strain on center wavelength should be decoupled when measuring. In this paper, the sensing characteristics of FBG which pasted at different angles were simulated and analyzed, and it was found that FBG sensing for strain has strong directivity. A dual FBG composite construction based on the directivity of FBG sensing was proposed. Two FBGs were at an Angle of 62°. One FBG was sensitive to both temperature and strain, and the other was only sensitive to temperature. The structure can realize the decoupling of temperature and strain, and it doesn’t depend on feature of cantilever beam. It was verified by experimental analysis that the decoupling result was good by utilizing the combined FBG structure, and decoupling was realized easily.


2020 ◽  
Vol 12 (10) ◽  
pp. 996-1004 ◽  
Author(s):  
David Veit ◽  
Michael Gadringer ◽  
Erich Leitgeb

AbstractEach of the various methods for mixed-mode load-pull measurements, which can be found in literature, has its own advantages and disadvantages. In this publication, we analyze two of the most commonly used setups and a third setup of which we provided an initial treatment in a previous publication. We investigated the impact of 180° hybrids on the tuning capabilities of a mixed-mode load-pull system. Furthermore, we provide a rule-of-thumb to easily estimate this impact using only some specifications of hybrids. For all analyzed setups, we use measurement results to show that the tuning range of the newly proposed setup is superior compared to the other setups, though hardware effort and tuning complexity are greater.


2019 ◽  
Vol 294 ◽  
pp. 02001
Author(s):  
Andrzej Białoń ◽  
Kamil Białek ◽  
Patryk Wetoszka

This paper discussed the measurement of radiated emissions of electromagnetic disturbances generated by diesel electric locomotive system. The measurement methodology, permissible values of a magnetic and electric field according to EN 50121-3-1 standard during driving and standstill for electric diesel locomotive are presented. The article presents examples of test results and an assessment of the obtained measurement results in the electric and diesel traction according to the applicable requirements.


Measurement ◽  
2020 ◽  
Vol 166 ◽  
pp. 108199
Author(s):  
Yunfan Yang ◽  
Liang Ling ◽  
Pengfei Liu ◽  
Kaiyun Wang ◽  
Wanming Zhai

Sign in / Sign up

Export Citation Format

Share Document