A picture is not always worth a thousand words: The visual quality of photographs affects the effectiveness of interpretive signage for science communication

2021 ◽  
pp. 096366252098253
Author(s):  
Lei Zhu ◽  
Lloyd S. Davis ◽  
Anna Carr
Keyword(s):  
Empirical Evidence ◽  
Science Communication ◽  
Visual Quality ◽  
High Quality

Photographs are widely used to visualise science. However, the influence of visual quality of photographs on the effectiveness of science communication is often disregarded and seldom tested. This study examines how the visual quality of photographs affects science communication on interpretive signage within Xixi National Wetland Park, China. Results show that a high-quality photograph on the signage significantly increased the following affective and cognitive aspects of communication: (1) a visitor’s intention to read the signage, (2) enjoyment of reading the interpretive information, (3) understanding and (4) recall of the information on the signage. This study offers empirical evidence for the benefits of using high-quality photographs to visualise science. To improve the effectiveness of science communication in interpretive products, we argue that the quality of the selected photographs should be considered seriously.

“OKVision® SMARTFIT™” Customizable Mini-Scleral Lenses Fitting Guide

The Eye ◽  
2021 ◽  
Vol 23 (1) ◽  
pp. 41-51
Author(s):  
N. A. Bakalova
Keyword(s):  
Basic Skills ◽  
Professional Knowledge ◽  
Visual Quality ◽  
High Quality ◽  
Basic Principles ◽  
Daily Care ◽  
Quality Of Vision ◽  
Parameters Calculation ◽  
Clinical Cases

As of today, scleral lenses are the only optical rehabilitation method that provides high visual quality of vision for patients with irregular cornea. This fitting guide is aimed at helping ophthalmologists acquire professional knowledge in the field of fitting scleral lenses and suggest tactics for managing patients with irregular corneas.The workshop outlines indications for prescribing scleral lenses, describes the basic principles of lens parameters calculation and fitting, taking into account the patientspecific parameters of the eyes. In addition, guidelines for acquiring skills in assessing and changing the position of scleral lenses on the patient’s eye, using customization options, daily care, manipulations for inserting on and removing lenses, and further dispensary observation are given.Mastering the basic skills of calculation and fitting customized scleral lenses helps practitioners expand their areas of practice, enhance professional competitiveness and provide patients with high quality vision, even in the most difficult clinical cases.

Decoupling Among CSR Policies, Programs, and Impacts: An Empirical Study

2016 ◽  
Vol 58 (2) ◽  
pp. 231-267 ◽  
Author(s):  
Johan Graafland ◽  
Hugo Smid
Keyword(s):  
Empirical Evidence ◽  
Social Issues ◽  
Empirical Studies ◽  
Global Reporting Initiative ◽  
High Quality ◽  
Csr Reporting ◽  
Four Levels ◽  
Implementation Level ◽  
Policies And Programs

There are relatively few empirical studies on the impacts of corporate social responsibility (CSR) policies and programs. This article addresses the research gap by analyzing the incidence of, and the conditions that affect, decoupling (defined as divergence) among CSR policies, implementation of CSR programs, and CSR impacts for various environmental and social issues. Complete decoupling is a condition of full divergence among policies, programs, and impacts amounting to purely ceremonial CSR. Using ratings from a sustainability rating agency on a sample of about 1,000 large companies in 24 countries, the authors find empirical evidence not supporting a conclusion of complete decoupling. The empirical evidence suggests four levels of nondivergence in the sample. First, for most CSR issues examined, CSR policies of high quality (as measured by scope and level of detail) do have relatively strong effects on CSR implementation. Second, CSR programs of high quality (as measured by scope, the use of targets, and the use of strict deadlines) do have relatively strong effects on CSR impacts. Third, for most CSR issues, even low-quality CSR policies enforce the incidence and quality of programs in comparison with having no policy at all. Fourth, weak programs have more impact on the realization of CSR goals than having no program at all. The authors also find that the quality of CSR reporting (as measured by the implementation level of Global Reporting Initiative guidelines) and locating the responsibility for CSR at the board level reduce decoupling by strengthening the quality of CSR programs.

scholarly journals Valuation of the training received in university regarding the utility for work by Catalan graduates

2015 ◽  
Vol 2 (2) ◽  
pp. 14
Author(s):  
S. Fachelli ◽  
D. Montolio
Keyword(s):  
Empirical Evidence ◽  
Individual Characteristics ◽  
High Quality ◽  
University System ◽  
Empirical Results ◽  
The Third ◽  
Academic Records ◽  
Education Training ◽  
The Relationship

<p class="Textoindependiente21">This article examines the factors that influence graduate valuations of the education/training they received at university in terms of its utility or applicability in the workplace. Drawing on the 2014 survey conducted by the Agency for the Quality of the Catalan University System, among students that graduated in 2010, we test three hypotheses. The first states that graduate valuation of the training received at university in terms of its utility for the workplace is higher among those who are currently employed in high quality jobs; the second that this valuation is higher among graduates employed in higher occupational categories; and, the third, that higher valuations are given by individuals with better academic records. The methodology used to test the three hypotheses is based on both descriptive and econometric techniques that allow us to control for specific individual characteristics and specific characteristics of the degree subjects studied. Preliminary empirical results allow us to verify two of the three hypotheses. The main contribution of this paper is to provide some initial insights into a relationship not frequently examined in the literature and to offer some empirical evidence that counters the typical “matching” standpoint taken on the relationship between education/training and level of employment.</p>

Influence of technology parameters of free-cutting steel continuous casting on the billet internal structure

2020 ◽  
Vol 76 (2) ◽  
pp. 139-142
Author(s):  
A. T. Kunakbaeva ◽  
A. M. Stolyarov ◽  
M. V. Potapova
Keyword(s):  
Regression Analysis ◽  
Continuous Casting ◽  
Internal Structure ◽  
Sulfur Content ◽  
Manganese Content ◽  
High Quality ◽  
Correlation And Regression Analysis ◽  
Cutting Steel ◽  
Continuously Cast

Free-cutting steel gains specific working properties thanks to the high content of sulfur and phosphorus. These elements, especially sulfur, have a rather high tendency to segregation. Therefore, segregation defects in free-cutting steel continuously cast billets can be significantly developed. The aim of the work was to study the influence of the chemical composition of freecutting steel and casting technological parameters on the quality of the macrostructure of continuously cast billets. A metallographic assessment of the internal structure of cast metal made of free-cutting steel and data processing by application of correlation and regression analysis were the research methods. The array of production data of 43 heats of free-cutting steel of grade A12 was studied. Steel casting on a five-strand radial type continuous casting machine was carried out by various methods of metal pouring from tundish into the molds. Metal of 19 heats was poured with an open stream, and 24 heats – by a closed stream through submerged nozzles with a vertical hole. High-quality billets had a cross-sectional size of 150×150 mm. The macrostructure of high-quality square billets made of free-cutting steel of A12 grade is characterized by the presence of central porosity, axial segregation and peripheral point contamination, the degree of development of which was in the range from 1.5 to 2.0 points, segregation cracks and strips – about 1.0 points. In the course of casting with an open stream, almost all of these defects are more developed comparing with the casting by a closed stream. As a result of correlation and regression analysis, linear dependences of the development degree of segregation cracks and strips both axial and angular on the sulfur content in steel and on the ratio of manganese content to sulfur content were established. The degree of these defects development increases with growing of sulfur content in steel of A12 grade. These defects had especially strong development when sulfur content in steel was of more than 0.10%. To improve the quality of cast metal, it is necessary to have the ratio of the manganese content to the sulfur content in the metal more than eight.

Experience of clinical testing of personal telemedicine system ‘Obereg’ for remote monitoring of patients in intensive care units

2020 ◽  
pp. 52-58 ◽  
Author(s):  
A. A. Eryomenko ◽  
N. V. Rostunova ◽  
S. A. Budagyan ◽  
V. V. Stets
Keyword(s):  
Intensive Care ◽  
Intensive Care Units ◽  
Remote Monitoring ◽  
Clinical Testing ◽  
Transportation Of Patients ◽  
High Quality ◽  
Telemedicine System ◽  
Accuracy Of Measurements ◽  
Hospital Equipment

The experience of clinical testing of the personal telemedicine system ‘Obereg’ for remote monitoring of patients at the intensive care units of leading Russian clinics is described. The high quality of communication with the remote receiving devices of doctors, the accuracy of measurements, resistance to interference from various hospital equipment and the absence of its own impact on such equipment were confirmed. There are significant advantages compared to stationary patient monitors, in particular, for intra and out-of-hospital transportation of patients.

METHODOLOGICAL ASPECTS OF VISUALIZATION OF CORONARY ARTERIES WITH TRANSTHORACIC ECHOCARDIOGRAPHY

2018 ◽  
pp. 26-35
Author(s):  
Z. A. Agaeva ◽  
K. B. Baghdasaryan
Keyword(s):  
Blood Flow ◽  
Coronary Blood Flow ◽  
Coronary Arteries ◽  
Transthoracic Echocardiography ◽  
Second Harmonic ◽  
Anatomic Reconstruction ◽  
High Quality ◽  
Acoustic Window ◽  
Methodological Aspects

The transthoracic echocardiography made by multifrequency probes with support of the mode of the second harmonic imaging, is a competitive method for visualization of the main coronary arteries and allows to estimate coronary blood flow with high quality. Of course, the method has considerable restrictions, most important of which is the low spatial resolution of a method, due to small acoustic window. Because of this the transthoracic visualization of coronary arteries perhaps will not become the leading method of anatomic reconstruction of separately taken coronary artery and especially all coronary arteries system. However uniqueness and indisputable advantage of this method is an opportunity to noninvasively estimate a coronary blood flow both once, and in dynamics.

Effect of networks on product innovation: empirical evidence from Indonesian SMEs

2013 ◽  
Vol 1 (2) ◽  
pp. 140-158 ◽  
Author(s):  
Nurul Indarti ◽  
Theo Postma
Keyword(s):  
Empirical Evidence ◽  
Product Innovation ◽  
Dynamic Effects ◽  
Depth Of Knowledge ◽  
External Knowledge ◽  
Software Firms ◽  
Using Data

Innovative companies generally establish linkages with other actors and access external knowledge in order to benefit from the dynamic effects of interactive processes. Using data from 198 furniture and software firms in Indonesia, this study shows that the quality of interaction (i.e. multiplexity) as indicated by the depth of knowledge absorbed from various external parties and intensity of interaction (i.e., tie intensity) are better predictors of product innovation than the diversity of interaction.

Estimates on poverty in Russia and the additional measures to reduce it at the regional level

2020 ◽  
Vol 18 (4) ◽  
pp. 739-752 ◽  
Author(s):  
R.M. Sadykov
Keyword(s):  
Poverty Rate ◽  
Regional Level ◽  
Living Standards ◽  
Standard Of Living ◽  
High Quality ◽  
Social Standard ◽  
Republic Of Bashkortostan ◽  
The Republic ◽  
Sociological Studies

Subject. This article deals with the issues of social justice and a high quality of life, creating favorable economic and social conditions. Objectives. The article aims to assess the rate and changes in poverty in Russia and the Republic of Bashkortostan and develop complementary measures to reduce it. Methods. For the study, I used the methods of logical, comparative, economic and statistical analyses, the results of sociological studies, and official statistics. Results. The article highlights additional measures to reduce poverty in the region, including the establishment of a minimum social standard of living in each particular region that determines the poverty rate. Conclusions. Various factors, such as economic sanctions, economic slowdowns, territorial and regional imbalances, lead to living standards decline and poverty rise.

SCIENTIFIC BASIS OF POSTGRADUATE TRAINING FOR OFFICER WORKING ETHNIC AFFAIRS USING STATE BUDGET IN THE PERIOD OF 2018 – 2025

2017 ◽  
Author(s):  
La Duc Minh ◽  
Nguyen Thi Hao ◽  
Vu Thi Thuy
Keyword(s):  
Economic Development ◽  
Ethnic Groups ◽  
Human Resource ◽  
Postgraduate Training ◽  
Scientific Basis ◽  
National Defense ◽  
High Quality ◽  
State Budget ◽  
International Integration

Ethnic affairs play an important role in socio of ethnic groups’ solidarity, assurance of security and national defense stability. In -economic development, maintenanceorder to improve the quality of ethnic affairs, it is practical to carry out postgraduate training of officer implementing ethnic affairs using state budget with the aim of encouraging and enhancing officer quality to satisfy high-quality human resource in international integration.

Удобрение перца сладкого

2018 ◽  
Author(s):  
V.A. Borisov ◽  
A.M. Menshikh ◽  
V.S. Sosnov ◽  
G.F. Monakhos
Keyword(s):  
Drip Irrigation ◽  
Sweet Pepper ◽  
Water Soluble ◽  
Mineral Fertilizers ◽  
High Quality ◽  
Organic Mineral ◽  
Soluble Fertilizer

Показано действие минеральных удобрений, микрокристаллического комплексного водорастворимого удобрения «Мастер» и органоминерального наноудобрения с ростостимулирующей активностью «Арксойл» при капельном орошении на урожайность и качество сладкого перца нового гибрида F1 Темп. Сочетание основного удобрения с листовой и корневой подкормками позволяет получить до 65 т/га плодов перца высокого качества.The action of mineral fertilizers, microcrystalline complex water soluble fertilizer Master and organic mineral nano-fertilizer with growth-stimulating activity Arksoil under drip irrigation on the productivity and quality of sweet pepper of the new hybrid F1 Temp is shown. The combination of basic fertilizer with leaf and root fertilizing allows to obtain up to 65 t/ha of pepper fruits of high quality.

Sign in / Sign up

Export Citation Format

Share Document