Enhanced performance of piezoelectric energy harvester through three serial vibrators

2020 ◽  
pp. 1045389X2097444
Author(s):  
Xiaobiao Shan ◽  
Haigang Tian ◽  
Tao Xie
Keyword(s):  
Energy Harvester ◽  
Flow Direction ◽  
Water Channel ◽  
Water Environment ◽  
Inhibitory Effect ◽  
Piezoelectric Energy ◽  
Piezoelectric Beam ◽  
In Series ◽  
Lock In ◽  
Piezoelectric Harvester

This paper presents a piezoelectric harvester array with three identical energy harvesting vibrators (EHVs) arranged in series along the water flow direction. Each EHV consists of a piezoelectric beam and an interference cylinder. Three serial EHVs are placed upright in the water channel. Prototypes of three EHVs are fabricated and experiments are conducted to explore the vibration response and harvesting performance. The experimental results demonstrated that three EHVs in the array show the obvious difference in excitation vibration and harvesting performance over single EHV. The lock-in frequency of three EHVs can be enhanced by the EHV array, and the speed bandwidth can be greatly broadened by accounting for 66.9%. The harvesting performance of upstream EHV (EHV-1) and downstream EHV (EHV-3) is significantly improved by the EHV array over single EHV. While, midstream EHV (EHV-2) shows an inhibitory effect to some extent. The overall harvesting performance in the EHV array can be increased by up to 36.23% compared with single EHV in certain spacing distances. The proposed EHV array shows the better harvesting ability over the previous harvesters. This work provides a comprehensive experimental guideline for further designing efficient harvester array used in low-speed water environment.

Enhancing the Output Power of a Piezoelectric Energy Harvester by Reducing the Effect of the Internal Capacitance Using Inductance

2016 ◽  
Author(s):  
Anahita Zargarani ◽  
S. Nima Mahmoodi
Keyword(s):  
Power Output ◽  
Energy Harvester ◽  
Resistive Load ◽  
Inductive Load ◽  
Electrical Circuits ◽  
Piezoelectric Energy ◽  
Innovative Method ◽  
Piezoelectric Beam ◽  
Power Outputs ◽  
Piezoelectric Harvester

This paper describes an innovative method for enhancing the power output of a piezoelectric energy harvester. The proposed approach is adopting inductance to reduce the effect of the internal capacitance of the piezoelectric harvester to boost the power output. Four electrical circuits for a piezoelectric beam harvester are studied; Simple Resistive Load (SRL), Inductive Load (IL), Standard AC-DC, and Inductive AC-DC circuits. An inductor is added to the SRL and standard AC-DC circuits to build the new IL and Inductive AC-DC circuits respectively. The power outputs of the four circuits are then studied. The results show that the adaptation of inductor enhances the power output. The IL circuit enhances the power output comparing to the SRL circuit. The Inductive AC-DC circuit also avails the standard AC-DC circuit.

Heartbeat Energy Harvesting Using the Fan-Folded Piezoelectric Beam Geometry

2015 ◽  
Author(s):  
M. H. Ansari ◽  
M. Amin Karami
Keyword(s):  
Natural Frequency ◽  
Energy Harvester ◽  
Low Frequency ◽  
Mode Shapes ◽  
Vibration Energy ◽  
Vibration Energy Harvester ◽  
Mechanical Coupling ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Piezoelectric Beam

A three dimensional piezoelectric vibration energy harvester is designed to generate electricity from heartbeat vibrations. The device consists of several bimorph piezoelectric beams stacked on top of each other. These horizontal bimorph beams are connected to each other by rigid vertical beams making a fan-folded geometry. One end of the design is clamped and the other end is free. One major problem in micro-scale piezoelectric energy harvesters is their high natural frequency. The same challenge is faced in development of a compact vibration energy harvester for the low frequency heartbeat vibrations. One way to decrease the natural frequency is to increase the length of the bimorph beam. This approach is not usually practical due to size limitations. By utilizing the fan-folded geometry, the natural frequency is decreased while the size constraints are observed. The required size limit of the energy harvester is 1 cm by 1 cm by 1 cm. In this paper, the natural frequencies and mode shapes of fan-folded energy harvesters are analytically derived. The electro-mechanical coupling has been included in the model for the piezoelectric beam. The design criteria for the device are discussed.

scholarly journals An Exact Analytical Solution to Exponentially Tapered Piezoelectric Energy Harvester

2015 ◽  
Vol 2015 ◽  
pp. 1-13 ◽  
Author(s):  
H. Salmani ◽  
G. H. Rahimi ◽  
S. A. Hosseini Kordkheili
Keyword(s):  
Analytical Solution ◽  
Energy Harvester ◽  
Exact Analytical Solution ◽  
Mode Shapes ◽  
Electric Resistance ◽  
Coupled Equations ◽  
Piezoelectric Energy ◽  
Piezoelectric Beam ◽  
Parallel Connections ◽  
Tip Mass

It has been proven that tapering the piezoelectric beam through its length optimizes the power extracted from vibration based energy harvesting. This phenomenon has been investigated by some researchers using semianalytical, finite element and experimental methods. In this paper, an exact analytical solution is presented to calculate the power generated from vibration of exponentially tapered unimorph and bimorph with series and parallel connections. The mass normalized mode shapes of the exponentially tapered piezoelectric beam with tip mass are implemented to transfer the proposed electromechanical coupled equations into modal coordinates. The steady states harmonic solution results are verified both numerically and experimentally. Results show that there exist values for tapering parameter and electric resistance in a way that the output power per mass of the energy harvester will be maximized. Moreover it is concluded that the electric resistance must be higher than a specified value for gaining more power by tapering the beam.

A Patternless Piezoelectric Energy Harvester for Ultra Low Frequency Applications

2020 ◽  
Vol 12 (7) ◽  
Author(s):  
M. R. Awal ◽  
◽  
M. Jusoh ◽  
T. Sabapathy ◽  
R. B. Ahmad ◽  
...  
Keyword(s):  
Energy Harvester ◽  
Low Frequency ◽  
Vibration Energy ◽  
Induced Voltage ◽  
Vibration Energy Harvester ◽  
Ultra Low Power ◽  
Energy Applications ◽  
Piezoelectric Energy ◽  
Deposition Thickness ◽  
Piezoelectric Harvester

This paper presents a pattern less piezoelectric harvester for ultra low power energy applications. Usually patterned cantilevers are used as vibration energy harvester which results additional fabrication process. Hence, to reduce the process, a four layer cantilever configuration is used to design the harvester with Aluminum, Silicon and Zinc Oxide. The device dimension is settled to 12×10×≈0.5009 mm3 with ≈300 nm deposition thickness for each layer. The modeling and fabrication processes are demonstrated in detail. The induced voltage by the cantilever is obtained through the analytical and practical measurements. From the measurements, it is found that, the maximum induced voltage is 91.2 mV from practical measurement with voltage density of 1.517 mV/mm3. It is evident from the results that, this pattern less model can be useful for next generation vibration energy harvester with simpler technology.

scholarly journals Ocean energy harvester based on piezoelectric VIV using different oscillators

2019 ◽  
Vol 136 ◽  
pp. 02017
Author(s):  
Min Liu ◽  
Hui Xia ◽  
Guoqiang Liu ◽  
Dong Xia
Keyword(s):  
Output Voltage ◽  
Energy Harvester ◽  
Fluid Velocity ◽  
Electrical Energy ◽  
Coupling Model ◽  
Maximum Output ◽  
Ocean Energy ◽  
Velocity Change ◽  
Piezoelectric Energy ◽  
Piezoelectric Beam

A finite element fluid-solid coupling model for ocean energy harvester based on piezoelectric vortex-induced vibration(VIV) is established. Given that the Karman Vortex Street is generated after the fluid passes through the vibrator. The model includes the conversion of water flow energy to VIV energy and the capture of electrical energy by piezoelectric devices. And the output voltage curve is obtained by coupling with piezoelectric beam. Based on the fluid-solid coupling calculation, the dynamic response characteristics of the oscillator under different parameters such as shape of oscillators and fluid velocity are studied. The voltage output of piezoelectric beam in cylindrical, semi-cylindrical and regular triangular oscillators is analyzed. Simulation results show that the output voltage and pressure difference are largest in regular triangular oscillator system compared with the cylindrical and semi-cylindrical system. When changing fluid velocity, it is found that the higher the velocity of the water fluid be, the higher the output voltage be. When the given fluid velocity reaches 1 m/s, the maximum output voltage of cylindrical, semi-cylindrical and regular triangular piezoelectric energy harvesters reaches 0.045V, 0.08V, and 0.085V respectively. Under the same fluid velocity, change the ratio of height and width of oscillator, and find that the higher ratio of height and width of oscillator is more suitable to harvest the energy of VIV.

An asymmetric magnetic-coupled bending-torsion piezoelectric energy harvester: modeling and experimental investigation

2021 ◽  
Author(s):  
Huirong Zhang ◽  
Wentao Sui ◽  
Chongqiu Yang ◽  
Leian Zhang ◽  
Rujun Song ◽  
...  
Keyword(s):  
Energy Harvester ◽  
Average Power ◽  
Harmonic Excitation ◽  
Lumped Parameter Model ◽  
Distributed Parameter ◽  
Piezoelectric Energy ◽  
Distributed Parameter Model ◽  
Piezoelectric Beam ◽  
Lumped Parameter ◽  
Torsion Energy

Abstract This paper presents a detailed investigation on an asymmetric magnetic-coupled bending-torsion piezoelectric energy harvester based on harmonic excitation. There is an eccentricity between the shape center of moving magnets and the axis of the piezoelectric beam, which results in the bending and torsion simultaneously in working condition. The distributed mathematical model is derived from the energy method to describe the dynamic characteristics of the harvester, and the correctness of the model is verified by experiments. To further demonstrate the improvement performance of the proposed energy harvester, the bending-torsion energy harvester (i.e. magnetic-coupled was not configured) is experimented and compared. The theoretical and experimental results indicate that the average power increases about 300% but the resonance frequency decreases approximately 2 Hz comparing to the harvester without magnetic-coupled. According to the characteristic of distributed parameter model, the magnetic force and the size of the piezoelectric beam are investigated respectively. And the lumped-parameter model is introduced to analyze the steady-state characteristic. Accordingly, this paper provides a feasible method to improve performance for piezoelectric energy harvester.

Dynamics of a piezoelectric energy harvester in a simulated rain environment

2017 ◽  
Vol 232 (15) ◽  
pp. 2642-2654 ◽  
Author(s):  
Voon-Kean Wong ◽  
Jee-Hou Ho ◽  
Eng Hwa Yap ◽  
Ai Bao Chai
Keyword(s):  
Impact Energy ◽  
Energy Harvester ◽  
Droplet Impact ◽  
Dynamical Model ◽  
Single Droplet ◽  
Piezoelectric Energy ◽  
Piezoelectric Beam ◽  
Simulated Rain ◽  
Artificial Rain ◽  
Rain Rates

Rain impact energy harvesting has proven to be a feasible and potent source of alternative energy. This paper presents the development of a dynamical model for rain impact energy harvester using a piezoelectric beam in simulated rain environment. Most of the conducted works in literature were based on single droplet impact with fixed height and drop position. The main contribution of this paper is to extend the single droplet impact dynamical model by incorporating random drop sizes and drop positions. In this work, a rain simulator is used to generate artificial rain of different rain rates. Following our previous works, the water accumulation on the piezoelectric beam is modeled using added mass coefficient, and impact coefficient is integrated into the dynamical model to describe the post-impact dynamics of the droplet impact. The stochastic nature of the artificial rain is described using rain rate and drop size distribution. Two random number generators are integrated into the model, which are lognormally and uniformly distributed, to generate random numbers for droplet diameter and drop position respectively. The accuracy of the theoretical model is validated experimentally by considering four different rain rates.

scholarly journals Development of a Non-Linear Bi-Directional Vortex-Induced Piezoelectric Energy Harvester with Magnetic Interaction

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2299
Author(s):  
Wei-Jiun Su ◽  
Zong-Siang Wang
Keyword(s):  
Magnetic Force ◽  
Energy Harvester ◽  
Beam Theory ◽  
Magnetic Interaction ◽  
Peak Voltage ◽  
Piezoelectric Energy ◽  
Vortex Induced Vibrations ◽  
Charge Model ◽  
Non Linear ◽  
Lock In

In this study, magnetic force is introduced to the design of a bi-directional U-shaped piezoelectric energy harvester for vortex-induced vibrations. The theoretical model of the beam structure is derived based on the Euler–Bernoulli beam theory. The vortex-induced vibration and the non-linear magnetic force are modeled according to the Rayleigh oscillator and the charge model, respectively. A prototype is fabricated and tested in two orthogonal directions under vortex-induced vibrations in a wind tunnel. Up and down wind-speed sweeps are carried out to investigate the non-linear responses of the harvester. The distance between the magnets and the length of the side beams are adjusted to examine the influence of the magnetic force on the lock-in region and voltage output of the harvester. Overall, the harvester shows strong non-linearity in the horizontal excitations. After adding magnets to the system, significant improvement of the lock-in region and the peak voltage is noticed in the horizontal mode under both up and down sweeps.

Experimental Investigation for Enhancing the Output Power of a Piezoelectric Energy Harvester

2017 ◽  
Author(s):  
Anahita Zargarani ◽  
S. Nima Mahmoodi
Keyword(s):  
Experimental Investigation ◽  
Output Power ◽  
Experimental Approach ◽  
Energy Harvester ◽  
Resistive Load ◽  
Inductive Load ◽  
Electrical Circuits ◽  
Piezoelectric Energy ◽  
Piezoelectric Beam

This paper investigates an experimental approach for enhancing the output power of a piezoelectric energy harvester. The proposed method adopts inductance to reduce the effect of the piezoelectric harvester’s impedance, and boost the output power. Four electrical circuits for a piezoelectric beam harvester are investigated experimentally; Simple Resistive Load (SRL), Inductive Load (IL), Standard AC-DC, and Inductive AC-DC circuits. The results show that the adaptation of inductor in the IL and Inductive AC-DC improves the output power compared to the SRL and Standard AC-DC respectively. The Inductive AC-DC circuit is shown to increase the output power by 6.7% in comparison to the existing standard AC-DC circuits.

Sign in / Sign up

Export Citation Format

Share Document