A Low-Cost, Flexible, Lightweight Video Recording System for Task Analysis

Author(s):  
Timothy R. Coles ◽  
Cedric Dumas

The authors report their experience from various task analysis projects in which users have been observed in situ. Solutions for simultaneous video recording, often needed to adequately observe and analyze a workspace, are discussed. Of the various analog- and digital-based solutions, the authors deem a low-cost solution using entry-level computer hardware to produce sufficiently high-fidelity feedback for most task analysis purposes. Such systems can be acquired and set up by novice computer users for a fraction of the cost of broadcast video systems. A case study demonstrates the application of one such inexpensive solution.

Author(s):  
Matthew Bergin ◽  
Thomas Myles ◽  
Aleksandar Radić ◽  
Christopher Hatchwell ◽  
Sam Lambrick ◽  
...  

Abstract Developing the next generation of scanning helium microscopes requires the fabrication of optical elements with complex internal geometries. We show that resin stereolithography (SLA) 3D printing produces low-cost components with the requisite convoluted structures whilst achieving the required vacuum properties, even without in situ baking. As a case study, a redesigned pinhole plate optical element of an existing scanning helium microscope was fabricated using SLA 3D printing. In comparison to the original machined component, the new optical element minimised the key sources of background signal, in particular multiple scattering and the secondary effusive beam.


2017 ◽  
Vol 11 (2) ◽  
pp. 827-840 ◽  
Author(s):  
Luc Girod ◽  
Christopher Nuth ◽  
Andreas Kääb ◽  
Bernd Etzelmüller ◽  
Jack Kohler

Abstract. Acquiring data to analyse change in topography is often a costly endeavour requiring either extensive, potentially risky, fieldwork and/or expensive equipment or commercial data. Bringing the cost down while keeping the precision and accuracy has been a focus in geoscience in recent years. Structure from motion (SfM) photogrammetric techniques are emerging as powerful tools for surveying, with modern algorithm and large computing power allowing for the production of accurate and detailed data from low-cost, informal surveys. The high spatial and temporal resolution permits the monitoring of geomorphological features undergoing relatively rapid change, such as glaciers, moraines, or landslides. We present a method that takes advantage of light-transport flights conducting other missions to opportunistically collect imagery for geomorphological analysis. We test and validate an approach in which we attach a consumer-grade camera and a simple code-based Global Navigation Satellite System (GNSS) receiver to a helicopter to collect data when the flight path covers an area of interest. Our method is based and builds upon Welty et al. (2013), showing the ability to link GNSS data to images without a complex physical or electronic link, even with imprecise camera clocks and irregular time lapses. As a proof of concept, we conducted two test surveys, in September 2014 and 2015, over the glacier Midtre Lovénbreen and its forefield, in northwestern Svalbard. We were able to derive elevation change estimates comparable to in situ mass balance stake measurements. The accuracy and precision of our DEMs allow detection and analysis of a number of processes in the proglacial area, including the presence of thermokarst and the evolution of water channels.


2018 ◽  
Vol 90 (10) ◽  
pp. 1631-1646 ◽  
Author(s):  
Alejandro J. Vitale ◽  
Gerardo M.E. Perillo ◽  
Sibila A. Genchi ◽  
Andrés H. Arias ◽  
María Cintia Piccolo

AbstractLakes, rivers, estuaries and ocean waters control many important natural functions at the regional-global level. Hence, integrative and frequent long-term water monitoring is required globally. This paper describes the main features and innovations of a low-cost monitoring buoys network (MBN) deployed in a temperate region of Argentina. The MBN was designed to record extended time series at high-frequency, which is of great value for the scientific community, as well as for decision-makers. In addition, two innovative designs belonging to two versions of moored buoys (i.e. shallow waters and coastal marine waters) were presented. It was shown that the cost of either of two versions of the buoy is low, which can be considered as the main advantage.


2018 ◽  
Vol 4 (12) ◽  
pp. eaau9711 ◽  
Author(s):  
Heping Shen ◽  
Stefan T. Omelchenko ◽  
Daniel A. Jacobs ◽  
Sisir Yalamanchili ◽  
Yimao Wan ◽  
...  

Increasing the power conversion efficiency of silicon (Si) photovoltaics is a key enabler for continued reductions in the cost of solar electricity. Here, we describe a two-terminal perovskite/Si tandem design that increases the Si cell’s output in the simplest possible manner: by placing a perovskite cell directly on top of the Si bottom cell. The advantageous omission of a conventional interlayer eliminates both optical losses and processing steps and is enabled by the low contact resistivity attainable between n-type TiO2and Si, established here using atomic layer deposition. We fabricated proof-of-concept perovskite/Si tandems on both homojunction and passivating contact heterojunction Si cells to demonstrate the broad applicability of the interlayer-free concept. Stabilized efficiencies of 22.9 and 24.1% were obtained for the homojunction and passivating contact heterojunction tandems, respectively, which could be readily improved by reducing optical losses elsewhere in the device. This work highlights the potential of emerging perovskite photovoltaics to enable low-cost, high-efficiency tandem devices through straightforward integration with commercially relevant Si solar cells.


Author(s):  
Lorena D. Mathien

Recent studies on textbook costs in the United States have indicated that there is a direct relationship between textbook costs and student success. With textbook costs increasing at a rate higher than the cost of living, many students have cited the textbook cost as an extremely important factor when obtaining (or not obtaining) a textbook. Open educational resources (OER) are tools that educators can use to supplement or build a course. OER are free for anyone to reuse, revise, remix, and redistribute and are a low-cost, tailored solution for faculty and students. There have been calls for research that demonstrates how OER are being put into practice. This case study examines the responses of users to a voluntary survey in a capstone business course that implemented OER in lieu of traditional textbooks. The study suggests that, for teachers and students, as well as self-directed learners, OER provide a valuable resource to eliminate the pay wall, improve learning design, and support the power of the community through sharing and collaboration.


Author(s):  
Bobbie Corbett ◽  
Nicholas Wellwood ◽  
David Shing ◽  
Leslie Angus Jackson

Munna Point is a premiere recreational beach in the Noosa River which has been maintained by regular nourishment for over 20 years. As longevity of each nourishment was less than 6 months, the long-term costs were high and efforts were eventually suspended resulting in loss of the beach. In an effort to reinstate the amenity and provide a more stable beach, a groyne field accompanied by nourishment was proposed. To provide a low-impact, low-risk and low-cost solution, the groynes were designed with a low crest using sand-filled geotextile containers. To achieve the design, containers and scour mattresses were filled in-situ using a dredge, which was an innovative application of a methodology typically adopted for much larger containers. The first 3 groynes have successfully been installed as part of the first stage and 12 months of monitoring subsequently undertaken. The groynes have clearly been effective at extending the longevity of the nourishment and the wider intertidal profile has remained very stable. The beach is now successfully enhancing the amenity of the community and experiencing a high level of usage.


2019 ◽  
Vol 8 (3) ◽  
pp. 3790-3794

modern society entirely depends on electricity for daily life. It has become the key component for modern technology, without electricity most of the equipments which we are using daily will not work at all. Internet is our gateway for knowledge and we also depend on it a lot to get the things which are surrounding us very easily. Under this situation we are not using proper electrical energy in case of street lights. Street lights are perfect solution for night base loads at most of the utility companies during 1930’s were seeking for night timed base loads especially coal based power plants. In India approximately 40 million street lights are there which will generates a total demand of 4000 MW. The cost required to satisfy this demand will also very high. In most of the places maintenance of street lights is very poor. Even though several technologies have used to automatic control of street light but they may turn into several failures because of high cost, improper maintenance, environmental effects on the components or some other major issues. In this paper a low cost maintenance free automatic street light control system is proposed which can be used with relay al well as without relay by using basic electronics components. A small experimental set up has done in laboratory and it can be concluded that the street light automatically turns on and off depends on the darkness of the environment. It can be implemented anywhere irrespective of environmental conditions without any maintenance


2021 ◽  
Author(s):  
Maria Brodovoi ◽  
Kilian Gruel ◽  
Lucas Chapuis ◽  
Aurélien Masseboeuf ◽  
Cécile Marcelot ◽  
...  

Abstract In response to a continually rising demand for high performance and low-cost devices, and equally driven by competitivity, the microelectronics industry excels in meeting innovation challenges and further miniaturizing products. However, device shrinkage and the increasing complexity of device architecture require local quantitative studies. In this paper, we demonstrate with a case study on a nanocapacitor, the capability of transmission electron microscopy in electron holography mode to be a unique in-situ technique for mapping electric fields and charge distributions on a single device.


2019 ◽  
Vol 68 (6) ◽  
pp. 448-459 ◽  
Author(s):  
Hany F. Abd-Elhamid ◽  
Gamal M. Abdelaal ◽  
Isamil Abd-Elaty ◽  
Abdelrahman M. Said

Abstract Groundwater is one of the most important water sources but it is often not far away from pollution. One source of pollution is leakage from polluted streams such as open drains. The effect of open drains on groundwater quality has become an essential issue. This study aims to use different lining materials to minimize the seepage from open drains to protect groundwater. MODFLOW is used to investigate flow and contaminant transport and to evaluate efficiency of different lining materials. A hypothetical case study is used to assess different lining materials such as clay, bentonite, geomembranes and concrete. The results showed that decreasing the conductivities of lining materials reduced the extension of the contaminate. The extension of contaminants was reduced by 43, 89.6, 91.4 and 93% compared with the base case when drains were lined by clay, bentonite, geomembranes and concrete, respectively. Also, cost analysis of lining materials was done to detect the best lining material. Lining using geomembranes reduced contaminant extension at low cost compared with concrete, which reduced contaminant extension at double the cost. This reveals that the geomembranes represent the preferred material to protect groundwater from drain seepage due to its high durability and low cost compared with concrete.


Processes ◽  
2020 ◽  
Vol 8 (8) ◽  
pp. 904 ◽  
Author(s):  
Miguel Sanchis-Sebastiá ◽  
Joaquín Gomis-Fons ◽  
Mats Galbe ◽  
Ola Wallberg

Biofuels are still too costly to compete in the energy market and it has been suggested that low-value feedstocks could provide an opportunity for the production of low-cost biofuels; however, the lower quality of these feedstocks requires the introduction of a conditioning step in the biorefinery process. The aim of this study was to evaluate whether feedstock savings cover the cost of conditioning in the case of animal bedding. The BioSTEAM software was used to simulate a wheat straw biorefinery and an animal bedding biorefinery, whose economic performance was compared. The wheat straw biorefinery could deliver ethanol at a minimum selling price of USD 0.61 per liter, which is similar to prices in the literature. The cost of producing ethanol in the animal bedding biorefinery without water recycling was almost 40% higher, increasing the minimum selling price to USD 1.1 per liter of ethanol. After introducing water recycling in the conditioning step, the animal bedding biorefinery could deliver ethanol at a minimum selling price of USD 0.38 per liter, which is 40% lower than in the case of the wheat straw biorefinery. This demonstrates that low-value feedstocks can be used to reduce the biofuel price, as feedstock savings easily cover the additional conditioning cost.


Sign in / Sign up

Export Citation Format

Share Document