scholarly journals Spatio-Temporal Variation of Particulate Matter(PM2.5) Concentrations and Its Health Impacts in a Mega City, Delhi in India

2018 ◽  
Vol 12 ◽  
pp. 117863021879286 ◽  
Author(s):  
Amit Kumar Gorai ◽  
Paul B Tchounwou ◽  
SS Biswal ◽  
Francis Tuluri

Rising concentration of air pollution and its associated health effects is rapidly increasing in India, and Delhi, being the capital city, has drawn our attention in recent years. This study was designed to analyze the spatial and temporal variations of particulate matter (PM2.5) concentrations in a mega city, Delhi. The daily PM2.5 concentrations monitored by the Central Pollution Control Board (CPCB), New Delhi during November 2016 to October 2017 in different locations distributed in the region of the study were used for the analysis. The descriptive statistics indicate that the spatial mean of monthly average PM2.5 concentrations ranged from 45.92 μg m−3 to 278.77 μg m−3. The maximum and minimum spatial variance observed in the months of March and September, respectively. The study also analyzed the PM2.5 air quality index (PM2.5—Air Quality Index (AQI)) for assessing the health impacts in the study area. The AQI value was determined according to the U.S. Environmental Protection Agency (EPA) system. The result suggests that most of the area had the moderate to very unhealthy category of PM2.5-AQI and that leads to severe breathing discomfort for people residing in the area. It was observed that the air quality level was worst during winter months (October to January).

Energies ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 2119 ◽  
Author(s):  
Ying Li ◽  
Yung-Ho Chiu ◽  
Liang Lu

Rapid economic development has resulted in a significant increase in energy consumption and pollution such as carbon dioxide (CO2), particulate matter (PM2.5), particulate matter 10 (PM10), SO2, and NO2 emissions, which can cause cardiovascular and respiratory diseases. Therefore, to ensure a sustainable future, it is essential to improve economic efficiency and reduce emissions. Using a Meta-frontier Non-radial Directional Distance Function model, this study took energy consumption, the labor force, and fixed asset investments as the inputs, Gross domestic product (GDP) as the desirable output, and CO2 and the Air Quality Index (AQI) scores as the undesirable outputs to assess energy efficiency and air pollutant index efficiency scores in China from 2013–2016 and to identify the areas in which improvements was necessary. It was found that there was a large gap between the western and eastern cities in China. A comparison of the CO2 and AQI in 31 Chinese cities showed a significant difference in the CO2 emissions and AQI efficiency scores, with the lower scoring cities being mainly concentrated in China’s western region. It was therefore concluded that China needs to pay greater attention to the differences in the economic levels, stages of social development, and energy structures in the western cities when developing appropriately focused improvement plans.


Author(s):  
Oyunjargal D ◽  
Byambatseren Ch

The purpose of this research is to determine the impact of the environment, especially the quality of air on house price. In addition, it also includes the research of the linkage between the index of air quality and average price of residential house which located in the most crowded districts of Ulaanbaatar such as Bayangol, Bayanzurkh, Chingeltei, Sukhbaatar, Songinokhairkhan and Khan-Uul. The statistical analysis and statistics determination methods were applied to identify the relationship utilizing the air quality index, determined from the air quality measurement data recorded in 2015-2017, and the average price per square meter of newly built apartment houses in the selected districts. The research findings suggest that there is little direct link between the house prices and air quality level, and the air quality levels of Ulaanbaatar districts do not have a significant impact on the price per square meter. Therefore, the air quality index should not considered as a house price determinant.


The surveys regarding air pollution shows that there has been a hasty growth due to the emission of fuels and exhaust gases from factories. The Air Quality Index (AQI) has been launched to note the contemporary status of the air quality. The intent of AQI is to aid every individual know how the regional air quality will make an impact on them. The Environmental Protection Agency assess the AQI for five major air pollutants namely Nitrogen dioxide (NO2), ground-level ozone (O3), particle pollution (PM10, PM2.5), carbon monoxide (CO), and sulphur dioxide (SO2). The intent of the project is to congregate real-time Air Quality Index from distinct monitoring stations across India, analysing the data and reporting on it. Collect the real-time data using the API key provided by Open Government Data (OGD) platform India. This is done by making use of Microsoft Business Intelligence (MSBI) and Power BI Tools to transform, analyse and visualize the data. This project can be utilized to develop various programs like Ozone today in Europe and in mobile applications which acts as an alert system that can protect people from air pollution.


Author(s):  
Reeta Kori ◽  
Alok Saxena ◽  
Harish Wankhade ◽  
Asad Baig ◽  
Ankita Kulshreshtha ◽  
...  

A study has been conducted to assess the ambient air quality status of Dewas industrial area of Madhya Pradesh, India. Total nine locations were selected in Dewas industrial area for ambient air quality monitoring. The eleven pollutants mainly particulate matter less than 10 µ size (PM10), particulate matter less than 2.5 µ size (PM2.5), nitrogen dioxide (NO2), sulphur dioxide (SO2), ozone (O3), ammonia (NH3), benzene (C6H6), benzo (a) Pyrene (BaP) – particulate phase, lead (Pb), Arsenic (As) and Nickel (Ni) were monitored during different four quarters from April 2019 to March 2020. The study revealed that average concentration of gaseous pollutants viz, NO2, SO2, O3, NH3, C6H6 in ambient air were well within standard limits at all selected locations, however concentration of particulate matter (PM10, PM2.5) and heavy metals (Pb & Ni) except As level were found exceeding the National Ambient Air Quality Standards (NAAQS) 2009, India at few monitoring locations. Benzo (a) Pyrene (BaP) –particulate phase in ambient air was not detected during this study. Ambient air Quality Index was found to be moderate (115.56-198.36) at six locations and satisfactory (17.60-94.94) at three locations in Dewas industrial area. Overall ambient Air Quality Index of Dewas industrial area was observed, satisfactory to moderate during this study w.r.t. Air Quality Index. KEY WORDS: Industrial Area, Ambient Air, Air Pollutants, Air Quality Index


2020 ◽  
Vol 20 (7) ◽  
pp. 1552-1568 ◽  
Author(s):  
Jiajia Zhang ◽  
Kangping Cui ◽  
Ya-Fen Wang ◽  
Jhong-Lin Wu ◽  
Wei-Syun Huang ◽  
...  

Author(s):  
Adam Turecki

The differences between what in the winter 2017 was presented by the government measurement station of air quality, belonging to the Chief Inspectorate of Environmental Protection (CIEP) in Bialystok in Poland, and what the citizens could see and smell, were the reason for installing the monitoring system of PM10 and PM2.5 particulate matter, in the "Laboratory of Energy-efficient Architecture and Renewable Energies" (LEARE) at the Faculty of Architecture of Bialystok University of Technology. The measurements were compared with done by CIEP and the information of “The World Air Quality Index” (WAQI). This project started in 2007. It is proving a transparent Air Quality information for more than 70 countries, covering more than 9000 stations in 600 major cities. Since 16 Nov 2017, data was also downloaded from the new European Air Quality Index (EAQI) website, created by the European Environment Agency (EEA). From the beginning of 2018, data from the public-private service AIRLY was added to the study. They installed four online dust meters in Bialystok. The density of the dust measurement network was still insufficient, so the mobile measurements were started. Recently, the use of a drone equipped with a dust meter for tests at various heights has begun. Measurements denies EAQI presentation of so good air quality in Bialystok. The levels of PM2.5 and PM10 are often much higher than those presented by EAQI and CIEP. Government measuring station, located in the center of Bialystok, poorly reflect air pollution in peripheral districts.


2020 ◽  
Author(s):  
Olalekan Tesleem Kolawole ◽  
Akinade Shadrach Olatunji ◽  
Khanneh Wadinga Fomba

<p>Atmospheric traffic-related elements (TRE) generated from traffic-related emissions have been linked to a wide range of human diseases and also affect the ecosystem. This study focuses on data from the Nigerian air quality network along the segment of the National Highway Roads (NHR), inner-city Major Roads (MR) and Rural Roads (RR) in Ibadan. The aim of this near-road monitoring was to assess the levels of TRE, determine the particulate matter (PM<sub>10</sub>) concentrations and mineralogical composition of the PM<sub>10</sub> particles.</p><p>Sixty particulate matter (PM<sub>10</sub>) samples were collected from 5 traffic-related stations (2-NHR; 2-MR; 1-RR) (six samples from each station) in the study area using traffic-related high-volume air sampler with PM<sub>10</sub> cut-off on cellulose filter. PM<sub>10</sub> concentration was calculated from the difference in weight of the filter and flow rate of the sampler while the mineralogical composition of the PM<sub>10</sub> was determined by single-particle analysis using scanning electron microscopy and energy-dispersive x-ray spectroscopy (SEM/EDXS) techniques, and the TRE were determined by inductively coupled plasma-optical emission spectrometry (ICP-OES).</p><p>The results of the PM<sub>10</sub> concentration showed that NHR had the highest concentration of 1194.30 µg/m<sup>3</sup>, while the lowest concentration was observed in RR (36.33 µg/m<sup>3</sup>), these correspond to the level of traffic density in both stations, the former having 60,000 vehicle/day while the later had <2000 vehicle/day. More than 80% of the PM<sub>10</sub> concentrations in the NHR and the MR were classified as being unhealthy-hazardous to humans living very close to this environment on the basis of the air quality index (AQI). The most abundant mineral particles were clay (53%), quartz (9%) and rock-forming minerals (<3%) sourced from roadside soil and fly ash from construction rock dust. Other particles such as clay+sulphate (17%), sulphur-rich particle (8%), soot (7%) and tarballs (8%) were generated from anthropogenic input from traffic-related activities. The highest average concentration of TRE such as Ba, Cd, La, Pb, V and Zn (2.81, 1.61, 1.21, 6.92, 8.92 and 10.73 respectively all in µg/m<sup>3</sup>) was observed in NHR, while those of Cu, Mo and Mn (5.45 µg/m<sup>3</sup>, 6.67 µg/m<sup>3</sup> and 11.78 µg/m<sup>3</sup> respectively) was observed in MR. Principal component analysis (PCA) revealed four factors (PC1 to PC4). In PC1 26.57% of the variability was observed and loaded with Ba (0.76), Pb (0.82), V (0.85) while PC 2 could explain 17.94% variability and had La (0.67), Mn (0.83) and Mo (0.68), PC 3 explained 15.91% variance loaded with Cd (0.84) and Zn (0.77), and PC 4 gave account of 13.83% of the variance and was loaded with Cu (0.86). PC1 and PC2 were products of both gasoline and diesel engine while PC3 and PC4 were generated from engine oil, brake and tyre wares. The calculated enrichment factor classified the TRE as being moderate to highly contaminated in both NHR and MR while RR was considered relatively uncontaminated.</p><p> </p><p>Keywords: Traffic-related elements; Air quality index; National highway roads; Major roads; Rural roads</p>


Sign in / Sign up

Export Citation Format

Share Document