Investigation and comparison on thermal comfort and energy consumption of four personalized seat heating systems based on heated floor panels

2020 ◽  
pp. 1420326X2093914
Author(s):  
Guoqing Yu ◽  
Zhaoji Gu ◽  
Zhenye Yan ◽  
Hengtao Chen
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Yangtze River Basin ◽  
High Energy ◽  
Body Parts ◽  
Lower Body ◽  
Heating Systems ◽  
Heated Floor

The climate of Yangtze River Basin in China is cold and humid in winter. Conventional air-conditioning systems may cause high energy consumption and uncomfortable microclimatic conditions especially for lower body of indoor occupants. This study investigated four personalized seat heating systems, in a typical office room in Shanghai during winter, based on heated floor panels including heated floor panels + ordinary chair (HF-OC), heated floor panels + insulated chair (HF-IC), heated floor panels +insulated chair and leg box (HF-IC-LB) and overall personalized heating (OPH). The surface temperature of walls and heated floor panels, and the indoor air temperature at different positions were recorded with thermocouples. The hourly energy consumptions of the proposed personalized seat heating systems were measured and compared with a conventional split type air conditioner. Questionnaires of thermal sensation and comfort were carried out among 10 university students. Compared with HF-OC, HF-IC could improve the thermal comfort to a certain extent, while HF-IC-LB provided the optimal thermal micro-environment for the lower body other than other body parts. The OPH systems were proven effective to provide satisfactory thermal environment for all body parts at lower indoor temperature (12–16°C) with much less energy consumption than room air conditioners.

Evaluation of Human Thermal Comfort Using Near-Infrared Spectroscopy

2014 ◽  
Author(s):  
Keiichi Watanuki ◽  
Lei Hou ◽  
Yuuki Kondou
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Air Conditioning ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Brain Activation ◽  
Indoor Temperature ◽  
Prefrontal Area ◽  
Human Thermal Comfort ◽  
Conditioning Control

Air-conditioning equipment is used in various places such as houses, office buildings, and public facilities and is indispensable in modern-day life. Therefore, the energy consumption of air-conditioning equipment accounts for a large percentage of the total energy consumption in the average household. Specifically, it accounts for 26% of the annual energy consumption in ordinary homes and 27% in industry, according to the Annual Energy Report for Japan, which was presented by the Ministry of the Economy, Trade, and Industry, and the Agency for Natural Resources and Energy in 2010. Therefore, it is desirable to reduce energy consumption by reducing the air-conditioning load. The Ministry of the Environment recommends a constant preset temperature of 28°C in summer to decrease energy consumption. However, many people feel uncomfortable in such a thermal environment. Thus, an air-conditioning control to simultaneously suppress energy consumption and maintain human thermal comfort is desired. To develop such a control, an index to accurately evaluate human thermal comfort is needed. When a person feels comfortable or uncomfortable, their prefrontal area, which is involved in thinking and the feeling of emotions, is activated. It is presumed that the measurement of the brain activation reaction of a person will reveal whether the person feels comfortable or uncomfortable in the thermal environment. The evaluation of thermal comfort by means of brain activation reactions will allow one to develop the optimum air-conditioning control to maintain human thermal comfort. This paper proposes a method to evaluate thermal comfort via brain signals and ultimately aims to develop an air-conditioning control system utilizing this evaluation method. This paper will describe the measurement procedure of brain activation reactions to indoor-temperature change by using near-infrared spectroscopy and the relationship between thermal comfort and brain activation reaction. This study also investigated the changes in oxyHb levels together with indoor-temperature changes, measured with the NIRS. We measured the changes in the oxyHb levels of the prefrontal area when the temperature increased and decreased. As a result, the oxyHb level in the prefrontal area correlated with the indoor-temperature change, the PMV, and the subjects’ declaration of thermal sensation. Conversely, the change in the oxyHb level with the inclusion of wind and a constant indoor temperature significantly differed with that with a varying indoor temperature. Furthermore, the oxyHb change correlated with the PMV and the subject’s declaration of thermal sensation. Therefore, the measured oxyHb change may represent the thermal comfort of a person.

Thermal comfort and skin temperature responses to the supplied air from personal air nozzles in aircraft cabins

2017 ◽  
Vol 27 (6) ◽  
pp. 831-845 ◽  
Author(s):  
Zhaosong Fang ◽  
Hong Liu ◽  
Baizhan Li ◽  
Yong Cheng
Keyword(s):  
Thermal Comfort ◽  
Skin Temperature ◽  
Thermal Sensation ◽  
Body Part ◽  
Upper Body ◽  
Main Body ◽  
Body Parts ◽  
Lower Body ◽  
Healthy Human ◽  
Aircraft Cabins

For investigating the thermal comfort impact of supply air from personal nozzles on body positions of human bodies in aircraft cabins, a mock aircraft cabin with three rows of seats was built to investigate the effect of personal nozzle on thermal comfort of three main body parts, including head, upper body and lower body. In total, 12 tests were performed on 16 volunteers. Every test lasted 3 h and 40 minutes. Simultaneously, volunteers’ responses for both local and overall thermal responses were recorded. Skin temperatures were monitored. The results showed that when cooling the upper body, variation in local thermal sensation, overall thermal sensation and average skin temperature were the most significant responses produced by 16 young healthy human volunteers taking part in the experiment. However, for the airflow sensation, the strongest impact was at the head (including forehead and face), followed by the upper body part (breast, back, shoulder, abdomen) and then the lower body part (buttock, sex organ, thighs, legs and feet). In order to minimize draft discomfort, the air supply from nozzles should be delivered directly to the upper body, which would make the passengers more comfortable and benefit the optimization of the design of the nozzle.

scholarly journals Investigation of thermal comfort and the nozzle usage behaviour in aircraft cabins

2017 ◽  
Vol 28 (1) ◽  
pp. 118-131 ◽  
Author(s):  
Zhaosong Fang ◽  
Hong Liu ◽  
Baizhan Li ◽  
Andrew Baldwin
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Ventilation System ◽  
Body Part ◽  
Upper Body ◽  
Body Parts ◽  
Aircraft Cabins ◽  
Minimum Number ◽  
Personal Ventilation

In order to understand passengers’ demand for thermal comfort in aircraft cabins, we carried out a measurement of thermal environment parameters and thermal comfort field survey in an aircraft cabin under cruising at altitude in both summer and winter. The results showed that the air temperature studied was always kept within the range of 25℃ to 28℃ and the relative humidity was maintained within the range of 20% to 35%. The Mean Thermal Sensation Vote (MTSV) of passengers’ back and feet was higher than other local body parts, with lower air movement sensation. The MTSV of passengers in winter was higher than that in summer. Due to the muggy thermal environment, more than 60% of passengers advocated that it was necessary to utilize the personal ventilation system. In their usage of the personal ventilation nozzle, more than half of these passengers chose to cool upper body parts, only a minimum number of passengers opened the nozzle to direct airflow to their head. Therefore, we concluded that the position of the personal ventilation nozzle should be as close to the upper body part of a passenger’s body as possible, making it more convenient and effective to regulate passengers’ thermal comfort.

scholarly journals Personal Heating in Dwellings as an Innovative, Energy-Sufficient Heating Practice: A Case Study Research

2021 ◽  
Vol 13 (13) ◽  
pp. 7257
Author(s):  
Nick Van Loy ◽  
Griet Verbeeck ◽  
Elke Knapen
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Thermal Comfort ◽  
Thermal Sensation ◽  
Case Study Research ◽  
Heating Systems ◽  
Complementary Approach ◽  
Residential Context ◽  
Actual Energy Consumption

Despite the efforts to improve the energy efficiency of buildings, the actual energy consumption decreased much less than expected in recent years. Therefore, energy sufficiency is gaining attention as a complementary approach to energy efficiency. It aims to reduce the actual energy consumption of buildings by providing thermal comfort to residents in a sufficient way. This demands for alternative heating practices, such as the application of personal heating systems. Although a review of past studies shows that, in office buildings, thermal comfort can be provided with less energy by using personal heating systems, the application in a residential context is much less explored. Our hypothesis is that an innovative, energy-sufficient personal heating practice also has potential to reduce the overall energy consumption in dwellings. Therefore, this paper presents the results of a one-week case study on personal heating as an energy-sufficient heating practice in three dwellings. During the case study, the ambient temperature was reduced to 18 °C, and residents were allowed to use active and passive personal heating systems to make themselves as comfortable as possible. They were also asked to evaluate their thermal sensation and thermal comfort. The results show that, despite a lower indoor temperature, residents are able to achieve thermal comfort by using personal heating at the locations where they effectively reside. Additionally, a significant energy saving potential was found. The case study proved our hypothesis, leading to the conclusion that an innovative, sufficient personal heating practice in dwellings can be a supplementary step to reduce the energy consumption to meet the global challenges.

scholarly journals Development of a Deep Neural Network Model for Estimating Joint Location of Occupant Indoor Activities for Providing Thermal Comfort

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 696
Author(s):  
Eun Ji Choi ◽  
Jin Woo Moon ◽  
Ji-hoon Han ◽  
Yongseok Yoo
Keyword(s):  
Neural Network ◽  
Thermal Comfort ◽  
Deep Neural Network ◽  
Mean Squared Error ◽  
Thermal Environment ◽  
The Body ◽  
Estimation Accuracy ◽  
Accurate Estimation ◽  
Body Parts ◽  
Joint Location

The type of occupant activities is a significantly important factor to determine indoor thermal comfort; thus, an accurate method to estimate occupant activity needs to be developed. The purpose of this study was to develop a deep neural network (DNN) model for estimating the joint location of diverse human activities, which will be used to provide a comfortable thermal environment. The DNN model was trained with images to estimate 14 joints of a person performing 10 common indoor activities. The DNN contained numerous shortcut connections for efficient training and had two stages of sequential and parallel layers for accurate joint localization. Estimation accuracy was quantified using the mean squared error (MSE) for the estimated joints and the percentage of correct parts (PCP) for the body parts. The results show that the joint MSEs for the head and neck were lowest, and the PCP was highest for the torso. The PCP for individual activities ranged from 0.71 to 0.92, while typing and standing in a relaxed manner were the activities with the highest PCP. Estimation accuracy was higher for relatively still activities and lower for activities involving wide-ranging arm or leg motion. This study thus highlights the potential for the accurate estimation of occupant indoor activities by proposing a novel DNN model. This approach holds significant promise for finding the actual type of occupant activities and for use in target indoor applications related to thermal comfort in buildings.

scholarly journals Towards Sustainable Development: Building’s Retrofitting with PCMs to Enhance the Indoor Thermal Comfort in Tropical Climate, Malaysia

2021 ◽  
Vol 13 (7) ◽  
pp. 3614
Author(s):  
Zeyad Amin Al-Absi ◽  
Mohd Isa Mohd Hafizal ◽  
Mazran Ismail ◽  
Azhar Ghazali
Keyword(s):  
Climate Change ◽  
Sustainable Development ◽  
Thermal Comfort ◽  
Phase Change Materials ◽  
Thermal Environment ◽  
High Energy ◽  
Transition Temperatures ◽  
Indoor Thermal Environment ◽  
Adaptive Thermal Comfort ◽  
The Difference

Building sector is associated with high energy consumption and greenhouse gas emissions, which contribute to climate change. Sustainable development emphasizes any actions to reduce climate change and its effect. In Malaysia, half of the energy utilized in buildings goes towards building cooling. Thermal comfort studies and adaptive thermal comfort models reflect the high comfort temperatures for Malaysians in naturally conditioned buildings, which make it possible to tackle the difference between buildings’ indoor temperature and the required comfort temperature by using proper passive measures. This study investigates the effectiveness of building’s retrofitting with phase change materials (PCMs) as a passive cooling technology to improve the indoor thermal environment for more comfortable conditions. PCM sheets were numerically investigated below the internal finishing of the walls. The investigation involved an optimization study for the PCMs transition temperatures and quantities. The results showed significant improvement in the indoor thermal environment, especially when using lower transition temperatures and higher quantities of PCMs. Therefore, the monthly thermal discomfort time has decreased completely, while the thermal comfort time has increased to as high as 98%. The PCM was effective year-round and the optimum performance for the investigated conditions was achieved when using 18mm layer of PCM27-26.

scholarly journals Energy-saving potential of intermittent heating system: Influence of composite phase change wall and optimization strategy

2020 ◽  
pp. 014459872096921
Author(s):  
Yanru Li ◽  
Enshen Long ◽  
Lili Zhang ◽  
Xiangyu Dong ◽  
Suo Wang
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Phase Change ◽  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Optimization Strategy ◽  
Indoor Thermal Environment ◽  
Indoor Thermal Comfort ◽  
Intermittent Heating

In the Yangtze River zone of China, the heating operation in buildings is mainly part-time and part-space, which could affect the indoor thermal comfort while making the thermal process of building envelope different. This paper proposed to integrate phase change material (PCM) to building walls to increase the indoor thermal comfort and attenuate the temperature fluctuations during intermittent heating. The aim of this study is to investigate the influence of this kind of composite phase change wall (composite-PCW) on the indoor thermal environment and energy consumption of intermittent heating, and further develop an optimization strategy of intermittent heating operation by using EnergyPlus simulation. Results show that the indoor air temperature of the building with the composite-PCW was 2–3°C higher than the building with the reference wall (normal foamed concrete wall) during the heating-off process. Moreover, the indoor air temperature was higher than 18°C and the mean radiation temperature was above 20°C in the first 1 h after stopping heating. Under the optimized operation condition of turning off the heating device 1 h in advance, the heat release process of the composite-PCW to the indoor environment could maintain the indoor thermal environment within the comfortable range effectively. The composite-PCW could decrease 4.74% of the yearly heating energy consumption compared with the reference wall. The optimization described can provide useful information and guidance for the energy saving of intermittently heated buildings.

scholarly journals An Interactive Task Conditioning System Featuring Personal Comfort Models and Non-Intrusive Sensing Techniques: A Field Study in Shanghai

Technologies ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 90
Author(s):  
Siliang Lu ◽  
Erica Cochran Hameen
Keyword(s):  
Thermal Comfort ◽  
Field Study ◽  
Air Temperature ◽  
Indoor Air ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
New Paradigm ◽  
Dynamic Task ◽  
Current Task ◽  
Open Plan

Heating, ventilation and air-conditioning (HVAC) systems play a key role in shaping office environments. However, open-plan office buildings nowadays are also faced with problems like unnecessary energy waste and an unsatisfactory shared indoor thermal environment. Therefore, it is significant to develop a new paradigm of an HVAC system framework so that everyone could work under their preferred thermal environment and the system can achieve higher energy efficiency such as task ambient conditioning system (TAC). However, current task conditioning systems are not responsive to personal thermal comfort dynamically. Hence, this research aims to develop a dynamic task conditioning system featuring personal thermal comfort models with machine learning and the wireless non-intrusive sensing system. In order to evaluate the proposed task conditioning system performance, a field study was conducted in a shared office space in Shanghai from July to August. As a result, personal thermal comfort models with indoor air temperature, relative humidity and cheek (side face) skin temperature have better performances than baseline models with indoor air temperature only. Moreover, compared to personal thermal satisfaction predictions, 90% of subjects have better performances in thermal sensation predictions. Therefore, personal thermal comfort models could be further implemented into the task conditioning control of TAC systems.

Analysis of the influence of cooling jets on the wind and thermal environment in football stadiums in hot climates

2019 ◽  
Vol 41 (5) ◽  
pp. 561-585 ◽  
Author(s):  
Fangliang Zhong ◽  
John K Calautit ◽  
Ben R Hughes
Keyword(s):  
Energy Consumption ◽  
Thermal Comfort ◽  
Air Conditioning ◽  
Thermal Environment ◽  
Thermal Conditions ◽  
Optimized Design ◽  
Outdoor Temperature ◽  
World Cup ◽  
Wind Environment ◽  
The Spectator

After winning the bid of the FIFA’s World Cup 2022, Qatar is facing the greatest challenges in terms of minimizing substantial energy consumptions for air-conditioning of stadiums and maintaining aero-thermal comfort for both players and spectators inside stadiums. This paper presents the results of temperature distributions and wind environment of the original stadium under the hot-humid climate and improvements on them for optimized scenarios of cooling jets. A combined computational fluid dynamics and building energy simulation approach was used to analyse the cooling performance and energy consumption per match of cooling air jets for 10 scenarios with different supply velocities, supply temperatures and locations of jets. The optimal scenario is to employ vertical jets above the upper tiers at supply temperature of 20°C and velocities of 2–12 m/s, integrated with horizontal jets of the same temperature at the lower tiers with 4 m/s and around the pitch with 7 m/s. This scenario can maintain the spectator tiers at an average temperature of 22°C and reduce the maximum predicted percentage of dissatisfied of thermal comfort from the original 100% to 63% for the pitch and 19% for the tiers, respectively. In terms of the energy consumption for the air-conditioning system per match, compared with one of the 2010 South Africa World Cup stadiums Royal Bafokeng stadium which consumed approximately 22.8 MWh energy for air-conditioning in winter (highest outdoor temperature 24.4°C), the maximum energy consumption of the optimal scenario in November (highest outdoor temperature 34.2°C) can reach 108 MWh. In addition, the spectator zones with scenario 8 have the potential to be resilient to the seasonal change of outdoor temperature if slight modifications of the supply velocities and precise temperature control on the spectator zones are applied. Moreover, the configurations presented in this paper can be used as a foundation of jets arrangement for future stadium retrofits in the hot climates. Practical application: This study assesses the aero-thermal conditions of a case study stadium under the hot climate of Qatar and explores the potential of applying cooling jets with different supply velocities, supply temperatures and their locations on the enhancement of both thermal and wind environment of spectator tiers and pitch. The assessment of the original stadium indicates that the ascending curved roof structure impedes the fresh air entering into the stadium and results in an asymmetric temperature distribution on the spectator tiers. The optimized design suggests a combination of vertical jets under the roof and both three arrays of horizontal jets at lower tiers and around pitch for future stadium optimizations in hot climates. It also recommends enhancing the thermal conditions on the pitch by optimizing the velocity of horizontal jets around the pitch. Moreover, the future design of the exact stadiums to be resilient to the seasonal changing outdoor temperature can be implemented based on scenario 8.

scholarly journals Determination of Thermal Comfort in Indoor Sport Facilities Located in Moderate Environments: An Overview

Atmosphere ◽  
2019 ◽  
Vol 10 (12) ◽  
pp. 769 ◽  
Author(s):  
Fabio Fantozzi ◽  
Giulia Lamberti
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Future Research ◽  
Indoor Environmental Quality ◽  
Indoor Environments ◽  
Major Question ◽  
Sport Practice ◽  
Sport Facilities

In previous years, providing comfort in indoor environments has become a major question for researchers. Thus, indoor environmental quality (IEQ)—concerning the aspects of air quality, thermal comfort, visual and acoustical quality—assumed a crucial role. Considering sport facilities, the evaluation of the thermal environment is one of the main issues that should be faced, as it may interfere with athletes’ performance and health. Thus, the necessity of a review comprehending the existing knowledge regarding the evaluation of the thermal environment and its application to sport facilities becomes increasingly relevant. This paper has the purpose to consolidate the aspects related to thermal comfort and their application to sport practice, through a deep study concerning the engineering, physiological, and psychological approaches to thermal comfort, a review of the main standards on the topic and an analysis of the methodologies and the models used by researchers to determine the thermal sensation of sport facilities’ occupants. Therefore, this review provides the basis for future research on the determination of thermal comfort in indoor sport facilities located in moderate environments.

Sign in / Sign up

Export Citation Format

Share Document