Influence of Silver Loaded Antibacterial Agent on Knitted and Nonwoven Fabrics and Some Fabric Properties

2016 ◽  
Vol 11 (1) ◽  
pp. 155892501601100 ◽  
Author(s):  
Ramazan Erdem ◽  
Subbiyan Rajendran
Keyword(s):  
Silver Ions ◽  
Antimicrobial Effect ◽  
Nonwoven Fabric ◽  
Antimicrobial Treatment ◽  
Positive Bacterium ◽  
Knitted Fabrics ◽  
Nonwoven Fabrics ◽  
Spray Technique ◽  
Scouring Process ◽  
Antimicrobial Effectiveness

The antibacterial effect of silver on knitted and nonwoven structures has been investigated. Three types of interlocked knitted fabrics (100% polyester, 100% viscose and 50%/50% polyester/viscose) were scoured and treated with silver ions by pad-dry-cure method. A nonwoven fabric (100% bleached cotton) was also treated with silver ions by using a spray technique. Physical and tensile properties of the treated fabrics were analyzed and compared with those of corresponding untreated ones. Results indicate that scouring process and antimicrobial treatment influenced the physical properties and antimicrobial effectiveness of the fabrics. An increase in tensile strength of 100% polyester and 100% viscose is observed after the antimicrobial treatment. The absorbency of all the treated knitted fabrics is decreased but it is substantially increased in the case of nonwoven fabrics. Antimicrobial activity of the treated fabrics was tested against Gram-positive bacterium Staphylococcus aureus. The results show that the treated nonwoven and blended (50%/50% polyester/viscose) knitted fabrics registered highest antimicrobial effect.

scholarly journals A Textile Waste Fiber-Reinforced Cement Composite: Comparison between Short Random Fiber and Textile Reinforcement

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3742
Author(s):  
Payam Sadrolodabaee ◽  
Josep Claramunt ◽  
Mònica Ardanuy ◽  
Albert de la Fuente
Keyword(s):  
Construction Material ◽  
Drying Shrinkage ◽  
Cement Composite ◽  
Nonwoven Fabric ◽  
Textile Waste ◽  
Nonwoven Fabrics ◽  
Potential Applications ◽  
Reinforced Cement ◽  
The One ◽  
Garment And Textile

Currently, millions of tons of textile waste from the garment and textile industries are generated worldwide each year. As a promising option in terms of sustainability, textile waste fibers could be used as internal reinforcement of cement-based composites by enhancing ductility and decreasing crack propagation. To this end, two extensive experimental programs were carried out, involving the use of either fractions of short random fibers at 6–10% by weight or nonwoven fabrics in 3–7 laminate layers in the textile waste-reinforcement of cement, and the mechanical and durability properties of the resulting composites were characterized. Flexural resistance in pre- and post-crack, toughness, and stiffness of the resulting composites were assessed in addition to unrestrained drying shrinkage testing. The results obtained from those programs were analyzed and compared to identify the optimal composite and potential applications. Based on the results of experimental analysis, the feasibility of using this textile waste composite as a potential construction material in nonstructural concrete structures such as facade cladding, raised floors, and pavements was confirmed. The optimal composite was proven to be the one reinforced with six layers of nonwoven fabric, with a flexural strength of 15.5 MPa and a toughness of 9.7 kJ/m2.

scholarly journals A Study on the Entanglement and High-Strength Mechanism of Spunlaced Nonwoven Fabric of Hydrophilic PET Fibers

2013 ◽  
Vol 8 (4) ◽  
pp. 155892501300800 ◽  
Author(s):  
Hong Wang ◽  
Jingjing Zhu ◽  
Xiangyu Jin ◽  
Haibo Wu
Keyword(s):  
Tensile Strength ◽  
High Strength ◽  
Nonwoven Fabric ◽  
Fiber Content ◽  
Nonwoven Fabrics ◽  
Pull Out ◽  
Fundamental Research ◽  
Pet Fibers ◽  
Set Up

Spunlaced nonwoven fabrics have been widely used recently, but fundamental research on the spunlaced nonwoven process is relatively weak. It is inexplicit until now how fibers are entangled with each other during the hydroentangling process. In this paper, a pull-out experiment designed to study the entanglement properties of spunlaced nonwoven fabrics using common and hydrophilic PET fibers as objects is described. It was found that the broken fiber content can be used to represent the entanglement intensity of the spunlaced nonwoven fabrics. In addition, a formula was set up to calculate the tensile strength of the spunlaced nonwoven fabric based on its pull-out behavior.

scholarly journals DEGRADATION OF NONWOVEN FABRICS SUITABLE FOR WET WIPES BURIED IN SOIL

2021 ◽  
Vol 2021 ◽  
pp. 137-141
Author(s):  
V. Sülar ◽  
B. Keçeci
Keyword(s):  
Weight Loss ◽  
Polyethylene Terephthalate ◽  
Nonwoven Fabric ◽  
Fibre Content ◽  
Regenerated Cellulose ◽  
Cellulosic Fibre ◽  
Degradation Behaviour ◽  
Visual Appearance ◽  
Nonwoven Fabrics ◽  
Fabric Structure

In this research, biodegradation behaviour of nonwoven fabrics suitable for wet wipes having different fibre types such as regenerated cellulose (viscose and Tencel), polyethylene terephthalate (PET) and their blends were investigated. Each nonwoven fabric was buried in soil and test samples were controlled in regular periods. Visual appearance was reported and examined by photographs and microscopic views. According to the changes in visual appearance and weight loss, biodegradation was examined in a systematic way. It has been observed that regenerated cellulose nonwoven fabrics and the PET nonwoven fabrics show big difference under the same degradation conditions. PET fibre content delays biodegradation in the soil and degradation behaviour is similar the content of PET fibre in fabric structure. The higher PET, lower degradation, and the higher cellulosic fibre, the higher degradation was determined for nonwoven fabrics suitable for wet wipes.

Utilization of recycled polyester nonwovens as sorbent for oil spill cleanups

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Viju Subramoniapillai ◽  
G. Thilagavathi
Keyword(s):  
Crude Oil ◽  
Vegetable Oil ◽  
Oil Spill ◽  
Nonwoven Fabric ◽  
Content Type ◽  
Oil Sorption ◽  
Nonwoven Fabrics ◽  
Oil Retention ◽  
Static Contact ◽  
Polyester Fibers

Purpose The most widely recycled plastic in the world is recycled polyethylene terephthalate (rPET). To minimize the environmental related issues associated with synthetic fibers, several researchers have explored the potential use of recycled polyester fibers in developing various technical textile products. This study aims to develop needle-punched nonwoven fabrics from recycled polyester fibers and investigate its suitability in oil spill cleanup process. Design/methodology/approach According to Box and Behnken factorial design, 15 different needle-punched nonwoven fabrics from recycled polyester fibers were prepared by changing the parameters, namely, needle punch density, needle penetration depth and fabric areal weight. Several featured parameters such as oil sorption, oil retention, oil sorption kinetics, wettability and reusability performance were systematically elucidated. Findings The maximum oil sorption of recycled nonwoven polyester is found to be 24.85 g/g and 20.58 g/g for crude oil and vegetable oil, respectively. The oil retention is about 93%–96% in case of crude oil, whereas 87%–91% in case of vegetable oil. Recycled polyester nonwoven possesses good hydrophobic–oleophilic properties with static contact angle of 138° against water, whereas 0° against crude oil and vegetable oil. The reusability test results indicate that recycled polyester nonwoven fabric can be used several times because of its reusability features. Originality/value There is no detailed study on the oil sorption features of needle-punched nonwoven fabrics developed from recycled polyester fibers. This study is expected to help in developing fabrics for oil spill cleanups.

Influence of Magnetite Dispersion on Tensile Properties

2019 ◽  
Vol 827 ◽  
pp. 190-195
Author(s):  
Kazuto Tanaka ◽  
Yuta Ishii ◽  
Tsutao Katayama
Keyword(s):  
Tensile Strength ◽  
Stearic Acid ◽  
Surface Treatment ◽  
Magnetic Particles ◽  
Nonwoven Fabric ◽  
Ultrasonic Agitation ◽  
Nonwoven Fabrics ◽  
Starting Point ◽  
Magnetic Nanofibers ◽  
Agitation Time

Nanofibers have high cell affinity due to their fine structure and surface roughness, and are expected to be used as biomaterials. In particular, magnetic nanofibers containing magnetic particles are expected to be used for magnetically induced drug delivery systems and hyperthermia. However, due to the aggregation of the magnetic particles contained in the nanofibers, there is a problem that the aggregation location becomes a starting point of fracture and causes a decrease in tensile strength. In this study, to improve the dispersibility of magnetic particles in Magnetite/PLA nanofiber nonwoven fabrics for suppressing the decrease in tensile strength, magnetite is subjected to surface treatment with oleic acid or stearic acid and ultrasonic agitation. Magnetite/PLA nanofiber nonwoven fabric was prepared by the electrospinning method, and dispersion of magnetite in PLA nanofiber nonwoven fabric and tensile strength were evaluated. Magnetite dispersion was improved by the surface treatment and increasing the ultrasonic agitation time. In particular, by performing the stearic acid treatment and prolonging the ultrasonic agitation time, the magnetite dispersion tended to be improved. This treated Magnetite/PLA nanofiber nonwoven fabric showed higher tensile strength.

Using unwrapped filament tows to strengthen sandwich composites: Puncture and bursting resistance

2018 ◽  
Vol 49 (10) ◽  
pp. 1374-1388
Author(s):  
Jia-Hsun Li ◽  
Ching-Wen Lou ◽  
Jing-Chzi Hsieh ◽  
Jia-Horng Lin
Keyword(s):  
Mechanical Performance ◽  
Nonwoven Fabric ◽  
Efficient Production ◽  
Sandwich Composites ◽  
Puncture Resistance ◽  
Nonwoven Fabrics ◽  
Multiple Parameters ◽  
Needle Punching ◽  
Custom Made ◽  
Single Pattern

The combination of appropriate materials and structural design can compensate for flaw of a single pattern, providing the products with better functionalities. In this study, the custom-made nonwoven fabric machine can unwrap the filament tows before needle punching stage. Sandwich composites are proposed, consisting of two nonwoven fabrics as surface layers and laminated loops of filaments as the core. The puncture resistance of the sandwich composites are examined in terms of weight of filament loops and needle-punching depth, examining their influences. The employment of filaments has a remarkable influence on the mechanical performance of the composites. GF4G has static puncture resistance, dynamic puncture resistance, and bursting strength that are 89%, 30%, 88% higher than those of GF1G; 332%, 127%, and 500% higher than those of 2G; and 671%, 400%, and 1260% higher than those of G. Using filaments to reinforce nonwoven fabrics only requires simple equipment and easy operation. Furthermore, based on the requirements of different final products, diverse filaments and multiple parameters can be combined, thereby providing the composites with efficient production, solid reinforcement, and broad applications.

Experimental and statistical analysis of carbon fiber/epoxy composites interleaved with nylon 6,6 nonwoven fabric interlayers

2020 ◽  
Vol 54 (27) ◽  
pp. 4173-4184
Author(s):  
Bertan Beylergil ◽  
Metin Tanoğlu ◽  
Engin Aktaş
Keyword(s):  
Fracture Toughness ◽  
Carbon Fiber ◽  
Composite Laminates ◽  
Nonwoven Fabric ◽  
Epoxy Composites ◽  
Nonwoven Fabrics ◽  
Mode I Fracture Toughness ◽  
Weight Density ◽  
Nylon 6,6 ◽  
Carbon Fiber Epoxy

Thermoplastic interleaving is a promising technique to improve delamination resistance of laminated composites. In this study, plain-weave carbon fiber/epoxy composites were interleaved with nylon 6,6 nonwoven fabrics with an areal weight density of 17 gsm. The carbon fiber/epoxy composite laminates with/without nylon 6,6 nonwoven fabric interlayers were manufactured by VARTM technique. Double cantilever beam fracture toughness tests were carried out on the prepared composite test specimens in accordance with ASTM 5528 standard. The experimental test data were statistically analyzed by two-parameter Weibull distribution. The results showed that the initiation and propagation fracture toughness Mode-I fracture toughness of carbon fiber/epoxy composites could be improved by about 34 and 156% (corresponding to a reliability level of 0.50) with the incorporation of nylon 6,6 interlayers in the interlaminar region, respectively. The results also revealed that the percent increase in the propagation fracture toughness value was 67 and 41% at reliability levels of 0.90 and 0.95, respectively.

Using antibacterial fibers and metallic wires to make woven fabrics used as smart diapers

2020 ◽  
pp. 152808372093037
Author(s):  
Bing-Chiuan Shiu ◽  
Jia-Ci Jhang ◽  
Ting-Ting Li ◽  
Hao-kai Peng ◽  
Li-wei Wu ◽  
...  
Keyword(s):  
Short Circuit ◽  
Antibacterial Properties ◽  
Silver Ions ◽  
Bottom Layer ◽  
Woven Fabrics ◽  
Cellular Phones ◽  
Electric Resistance ◽  
Nonwoven Fabrics ◽  
Metallic Wires ◽  
Moisture Absorbent

Cloth diapers also known as eco-diapers, traditional sandwich-structured eco-diapers are composed of top and bottom layers that are made of cotton or polyester nonwoven fabrics. On account of the hydrophilic bottom layer, urine permeates when the water absorption reaches saturation. In this study, polypropylene is melt-blown into hydrophobic polypropylene nonwoven fabrics to be used as the top and bottom layer. Polypropylene is hydrophobic but after being fabricated into nonwoven fabrics, the porous structure enables the urine to leak to the absorbent interlayer of eco-diapers. Hence, the top layer of diaper does not contain urine, which makes smart diapers more comfortable than cloth diapers that are made of cotton or other moisture-absorbent materials. Moreover, the sensing mechanism via Bluetooth module can detect the water content of the interlayer with a view to improving the demerit of urine leakage. The interlayer is the sensing layer that has antibacterial function. Two types of antibacterial yarns are treated by zinc oxide and silver ions. The yarns are fabricated into antibacterial woven fabrics, after which the antibacterial properties of fabrics are investigated with quantitative and qualitative tests. Next, two parallel metallic wires are assembled in order to trigger short circuit when sensing moisture, thereby obtaining different electric resistance based on different moisture levels. Furthermore, the miniature senor can signify the cellular phones or buzzers when the two metallic wires generate electrical resistance due to the presence of urine. The metallic wires are silver-plated copper yarns, stainless steel fibers, and copper fibers, which possess different electric resistance for the corresponding miniature sensors. This study proposes an efficient manufacture of smart diapers that require only a combination of woven fabrics and two metallic wires to sense moisture, the design of which can be encompassed in diverse fields.

scholarly journals Investigation about the Effect of Manufacturing Parameters on the Mechanical Behaviour of Natural Fibre Nonwovens Reinforced Thermoplastic Composites

Materials ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 2560 ◽  
Author(s):  
Imen Gnaba ◽  
Peng Wang ◽  
Damien Soulat ◽  
Fatma Omrani ◽  
Manuela Ferreira ◽  
...  
Keyword(s):  
Mechanical Behaviour ◽  
Areal Density ◽  
Nonwoven Fabric ◽  
Natural Fibre ◽  
Thermoplastic Composites ◽  
Reinforced Composites ◽  
Nonwoven Fabrics ◽  
Composite Scale ◽  
Needle Punching ◽  
Manufacturing Parameters

To date, nonwoven fabrics made with natural fibres and thermoplastic commingled fibres have been extensively used in the composite industry for a wide variety of applications. This paper presents an innovative study about the effect of the manufacturing parameters on the mechanical behaviour of flax/PP nonwoven reinforced composites. The mechanical properties of nonwoven fabric reinforced composites are related directly to the ones of dry nonwoven reinforcements, which depend strongly on the nonwoven manufacturing parameters, such as the needle-punching and areal densities. Consequently, the influence of these manufacturing parameters will be analysed through the tensile and flexural properties. The results demonstrated that the more areal density the nonwoven fabric has, the more the mechanical behaviour can be tested for composites. By contrast, it has a complex influence on needle-punching density on the load-strain and bending behaviours at the composite scale.

Development and Characterization of Hydroxyapatite Containing Silver by Precipitation and Immersion Methods

2014 ◽  
Vol 631 ◽  
pp. 216-221
Author(s):  
M.F. Santos ◽  
L.C.O. Vercik ◽  
A. Vercik ◽  
E.C.S. Rigo
Keyword(s):  
Bacterial Infections ◽  
Antibacterial Properties ◽  
Silver Ions ◽  
Antimicrobial Effect ◽  
Bone Substitutes ◽  
Precipitation Method ◽  
Precipitation Process ◽  
X Ray Diffraction ◽  
Ionic Groups ◽  
Conventional Antibiotics

The use of bone substitutes for recovery of lost function is a constant search within the medical field. So biomaterials have received a very large attention from the scientific community, including the materials the basis of calcium phosphate. Hydroxyapatite (HA) has been studied as apart from representing the natural constitution of the mass of bones and teeth in 30 to 70 %, has properties of bioactivity and osteoconductivity, encouraging and assisting the growth of bone tissue. In contrast, bacterial infections can arise after implantation causing the loss of functionality in the short and medium term. Several alternatives are being tested, usually associated with the use of conventional antibiotics incorporated into biomaterials. An alternative to antibiotics would be use such metals that possess antibacterial properties. Silver (Ag) is known as a bactericidal metal and so gained a prominent place among the studies as an important ally in the control of post-surgical infections. This work aimed to synthesize, characterize and evaluate the antimicrobial effect of the addition of silver ions into hydroxyapatite. The hydroxyapatites containing silver were obtained by the precipitation method in aqueous solution containing AgNO3 and by immersing the powder after the precipitation process in aqueous solutions containing AgNO3. At this stage of the work, were analyzed and characterized the crystalline phases and the ionic groups present in HA, HA precipitates with Ag and immersed in a solution of Ag. X-ray diffraction (XRD) spectra showed that regardless of the method used, precipitation (room temperature or 90°C) or by immersion, the metallic Ag was present in the structure of HA. Additionally, it was observed that the peaks indicated in the XRD pattern for HA corresponding to the diffraction pattern of plugs JPCDS 09-0432 (Joint Committee on Powder Diffraction Standards). No peaks related to the phases being observed β-TCP and CaO, respectively, indicating that the conditions adopted for obtaining HA Ag, only HA phase is present and that methods, precipitation and immersion are efficient to occur doping of HA with Ag

Sign in / Sign up

Export Citation Format

Share Document