scholarly journals Sound absorbing and insulating properties of natural fiber hybrid composites using sugarcane bagasse and bamboo charcoal

2021 ◽  
Vol 16 ◽  
pp. 155892502110448
Author(s):  
Santhanam Sakthivel ◽  
Selvaraj Senthil Kumar ◽  
Eshetu Solomon ◽  
Gedamnesh Getahun ◽  
Yohaness Admassu ◽  
...  
Keyword(s):  
Composite Materials ◽  
Physical Properties ◽  
Sugarcane Bagasse ◽  
Sound Absorption ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Acoustic Properties ◽  
Sound Insulation ◽  
Bamboo Charcoal ◽  
Green Composite

This research paper reports a study on thermal and sound insulation samples developed from sugarcane bagasse and bamboo charcoal for automotive industry applications. The sugarcane bagasse and bamboo charcoal fiber is a potential source of raw material that can be considered for thermal and sound insulation applications. Natural fibers are commonly used in diverse applications and one of the most important applications is sound absorption. Natural fiber hybrid composite currently is in greater demand in industries because of their advantages such as low cost, biodegradability, acceptable physical properties, and so on. Eco-friendly sound-absorbing composite materials have been developed using bamboo charcoal and sugarcane bagasse fibers. From these fibers five types of natural fiber green composite were developed using the compression bonding technique. The natural composite noise control performance contributes to its wider adoption as sound absorbers. The sound absorption coefficient was measured according to ASTM E 1050 by the Impedance tube method. The physical properties of natural fiber composites such as thickness, density, porosity, air permeability, and thermal conductivity were analyzed for all samples in accordance with ASTM Standard. The result exposed that natural fiber green composite were absorbing the sound resistance of more than 70% and the natural fibers composites provide the best acoustic absorption properties, these composite materials have adequate moisture resistance at high humidity conditions without affecting the insulation and acoustic properties.

scholarly journals Factors Affecting Acoustic Properties of Natural-Fiber-Based Materials and Composites: A Review

Textiles ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 55-85
Author(s):  
Tufail Hassan ◽  
Hafsa Jamshaid ◽  
Rajesh Mishra ◽  
Muhammad Qamar Khan ◽  
Michal Petru ◽  
...  
Keyword(s):  
Sound Absorption ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Fiber Type ◽  
Alkali Treatment ◽  
Acoustic Properties ◽  
Synthetic Fiber ◽  
Sound Insulation ◽  
Factors Affecting ◽  
Wide Range

Recently, very rapid growth has been observed in the innovations and use of natural-fiber-based materials and composites for acoustic applications due to their environmentally friendly nature, low cost, and good acoustic absorption capability. However, there are still challenges for researchers to improve the mechanical and acoustic properties of natural fiber composites. In contrast, synthetic fiber-based composites have good mechanical properties and can be used in a wide range of structural and automotive applications. This review aims to provide a short overview of the different factors that affect the acoustic properties of natural-fiber-based materials and composites. The various factors that influence acoustic performance are fiber type, fineness, length, orientation, density, volume fraction in the composite, thickness, level of compression, and design. The details of various factors affecting the acoustic behavior of the fiber-based composites are described. Natural-fiber-based composites exhibit relatively good sound absorption capability due to their porous structure. Surface modification by alkali treatment can enhance the sound absorption performance. These materials can be used in buildings and interiors for efficient sound insulation.

Information in United States Patents on works related to ‘Natural Fibers’: 2000-2018

2019 ◽  
Vol 12 (1) ◽  
pp. 4-76 ◽  
Author(s):  
Krittirash Yorseng ◽  
Mavinkere R. Sanjay ◽  
Jiratti Tengsuthiwat ◽  
Harikrishnan Pulikkalparambil ◽  
Jyotishkumar Parameswaranpillai ◽  
...  
Keyword(s):  
United States ◽  
Composite Materials ◽  
Natural Fiber ◽  
Comprehensive Evaluation ◽  
Natural Fibers ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Macro Scale ◽  
Structural Applications

Background: This era has seen outstanding achievements in materials science through the advances in natural fiber-based composites. The new environmentally friendly and sustainability concerns have imposed the chemists, biologists, researchers, engineers, and scientists to discover the engineering and structural applications of natural fiber reinforced composites. Objective: To present a comprehensive evaluation of information from 2000 to 2018 in United States patents in the field of natural fibers and their composite materials. Methods: The patent data have been taken from the external links of US patents such as IFI CLAIMS Patent Services, USPTO, USPTO Assignment, Espacenet, Global Dossier, and Discuss. Results: The present world scenario demands the usage of natural fibers from agricultural and forest byproducts as a reinforcement material for fiber reinforced composites. Natural fibers can be easily extracted from plants and animals. Recently natural fiber in nanoscale is preferred over micro and macro scale fibers due to its superior thermo-mechanical properties. However, the choice of macro, micro, and nanofibers depends on their applications. Conclusion: This document presents a comprehensive evaluation of information from 2000 to 2018 in United States patents in the field of natural fibers and their composite materials.

Influence of Palm Oil Fibers Length Variation on Mechanical Properties of Reinforced Crude Bricks

2022 ◽  
Author(s):  
Mazhar Hussain ◽  
Daniel Levacher ◽  
Nathalie Leblanc ◽  
Hafida Zmamou ◽  
Irini Djeran Maigre ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Composite Materials ◽  
Physical Properties ◽  
Palm Oil ◽  
Mechanical Characteristics ◽  
Natural Fibers ◽  
Indirect Tensile

Crude bricks are composite materials manufactured with sediments and natural fibers. Natural fibers are waste materials and used in construction materials for reinforcement. Their reuse in manufacturing reinforced crude bricks is eco-friendly and improves mechanical and thermal characteristics of crude bricks. Factors such as type of fibers, percentage of fibers, length of fibers and distribution of fibers inside the bricks have significant effect on mechanical, physical and thermal properties of biobased composite materials. It can be observed by tests such as indirect tensile strength, compressive strength for mechanical characteristics, density, shrinkage, color for physical properties, thermal conductivity and resistivity for thermal properties, and inundation test for durability of crude bricks. In this study, mechanical and physical characteristics of crude bricks reinforced with palm oil fibers are investigated and effect of change in percentage and length of fibers is observed. Crude bricks of size 4*4*16 cm3 are manufactured with dredged sediments from Usumacinta River, Mexico and reinforced with palm oil fibers at laboratory scale. For this purpose, sediments and palm oil fibers characteristics were studied. Length of fibers used is 2cm and 3cm. Bricks manufacturing steps such as sediments fibers mixing, moulding, compaction and drying are elaborated. Dynamic compaction is opted for compaction of crude bricks due to energy control. Indirect tensile strength and compressive strength tests are conducted to identify the mechanical characteristics of crude bricks. Physical properties of bricks are studied through density and shrinkage. Durability of crude bricks is observed with inundation test. Thermal properties are studied with thermal conductivity and resistivity test. Distribution and orientation of fibers and fibers counting are done to observe the homogeneity of fibers inside the crude bricks. Finally, comparison between the mechanical characteristics of crude bricks manufactured with 2cm and 3cm length with control specimen was made.

Empirical study on the correlation between measurement methods under diffuse and direct sound field conditions for determining sound absorption and airborne sound insulation properties of noise barriers

2021 ◽  
Vol 263 (3) ◽  
pp. 3350-3361
Author(s):  
Andreas Fuchs ◽  
Reinhard Wehr ◽  
Marco Conter
Keyword(s):  
Empirical Study ◽  
Sound Absorption ◽  
Sound Field ◽  
Research Programme ◽  
Measurement Methods ◽  
Field Conditions ◽  
Acoustic Properties ◽  
Sound Insulation ◽  
Noise Barriers ◽  
Airborne Sound

In the frame of the SOPRANOISE project (funded by CEDR in the Transnational Road Research Programme 2018) the database of the European noise barrier market developed during the QUIESST project was updated with newly acquired data. This database gives the opportunity for an empirical study on the correlation between the different measurement methods for the acoustic properties of noise barriers (according to the EN 1793 series) to further investigate the interrelationships between these methods by using single-number ratings and third-octave band data. First a correlation of the measurement methods for sound absorption under diffuse field conditions (EN 1793-1) and sound reflection under direct sound field conditions (EN 1793-5) is presented. Secondly, a correlation of the measurement methods for airborne sound insulation under diffuse field conditions (EN 1793-2) and airborne sound insulation under direct sound field conditions (EN 1793-6) is shown. While for airborne sound insulation a distinct correlation is found due to the wide data range, for sound absorption no robust correlation can be found.

Sound Absorption Characteristics of a Single Micro-Perforated Panel Backed by a Natural Fiber Absorber Material

2020 ◽  
Vol 307 ◽  
pp. 291-296 ◽  
Author(s):  
Meifal Rusli ◽  
Fakhrur Rahman ◽  
Hendery Dahlan ◽  
Gusriwandi ◽  
Mulyadi Bur
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Absorption Characteristic ◽  
Coconut Fiber ◽  
Single Leaf ◽  
Absorber Material ◽  
Resonance Absorber ◽  
Absorption Characteristics

A micro-perforated panel (MPP) works as a Helmholtz-type resonance absorber formed by an air-gab cavity in order to minimize the reflected sound effectively at a selective resonance frequency. Furthermore, the use of natural fibers as sound absorbing materials recently has attracted more attention because it is completely biodegradable, environmental friendly and more economical. In this paper, the combination of MPP and natural fiber as sound absorptive material is investigated. The MPP is made of a transparent acrylic board with 1.5 mm thickness and backed by a coconut fiber panel. The effect of the fiber panel that inserted in the air-gab cavity to the sound absorption characteristic of a single leaf MPP is observed. Sound absorption coefficient is measured by transfer function method using two microphones-impedance tube. It is found that the sandwich model of MPP backed by a coconut fiber changes the sound absorption characteristics of MPP by shifting the maximum absorption coefficient into the lower frequency and making a wider band of frequency absorption. Moreover, the air-gab cavity between MPP and fiber panel give fewer contribution to construct the MPP frequency resonant than the natural fiber panel one.

Application of Natural Fiber Composites in Engineering Industries: A Comparative Study

2016 ◽  
Vol 854 ◽  
pp. 59-64
Author(s):  
S. Syath Abuthakeer ◽  
Ramakrishnan Vasudaa ◽  
Afsana Nizamudeen
Keyword(s):  
Composite Materials ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Physical And Mechanical Properties ◽  
Fiber Composites ◽  
Future Research ◽  
Natural Fiber Composites ◽  
Reinforcing Agent ◽  
Wear And Tear ◽  
Cutting Out

Today’s technological innovations call for continual improvement in the field of material science to substitute the heavy structures with lightweight materials without compromising the strength. For this purpose composite materials (combination of two or more materials) are developed. The incorporation of natural fibers as reinforcing agent in both thermoset and thermoplastic polymer composites has gained increasing applications both in many areas of engineering and technology. A variety of natural fibers based polymer composite materials have been developed using modified synthetic strategies to extend its application from automotive to biomedical fields. The eco friendliness and reduction in wear and tear aspects in machineries with the use of natural fiber composites also has been captured in this paper. This paper is an earnest compilation of the data regarding a variety of natural fibers, their physical and mechanical properties, their resilience and strength. Considerable effort has been put in bringing the data on various natural fiber composites in one place by cutting out the details from various sources so as to make it as a ready reckoner for any researcher for future research in this area.

scholarly journals Tribology of Natural Fibers Composite Materials: An Overview

Lubricants ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 42 ◽  
Author(s):  
Marko Milosevic ◽  
Petr Valášek ◽  
Alessandro Ruggiero
Keyword(s):  
Composite Materials ◽  
Friction And Wear ◽  
Natural Fiber ◽  
Fiber Composite ◽  
Natural Fibers ◽  
Industrial Applications ◽  
Tribological Characteristics ◽  
Future Research ◽  
Wide Range ◽  
Mechanical And Tribological Characteristics

In the framework of green materials, in recent years, natural fiber composites attracted great attention of academia and industry. Their mechanical and tribological characteristics, such as high strength, elasticity, friction, and wear resistance, make them suitable for a wide range of industrial applications in which issues regarding a large amount of disposal are to be considered since their environmental friendliness gives them an advantage over conventional synthetic materials. Based on the recent and relevant investigations found in the scientific literature, an overview focused on the tribological characteristics of composite materials reinforced with different types of natural fibers is presented. The aim is to introduce the reader to the issues, exploring the actual knowledge of the friction and wear characteristics of the composites under the influence of different operating parameters, as well as the chemical treatment of fibers. The main experimental tribological techniques and the main used apparatus are also discussed, with the aim of highlighting the most appropriate future research directions to achieve a complete framework on the tribological behavior of many possible natural fiber composite materials.

Minimizing Property Variation in Natural Fiber Reinforcements for Green Composite Materials Applications

2017 ◽  
Vol 894 ◽  
pp. 50-55
Author(s):  
Leslie Joy L. Diaz ◽  
Stella Marie Hagad ◽  
Peter June M. Santiago
Keyword(s):  
Tensile Strength ◽  
Composite Materials ◽  
Natural Fiber ◽  
Large Deviation ◽  
Alkali Treatment ◽  
Unsaturated Polyester ◽  
Natural Fibers ◽  
Critical Length ◽  
Middle Section ◽  
Property Variation

Properties of composite materials are often predicted from properties of its component materials. In the case of green composites that are typically filled with natural fibers however, a large deviation from predictions is observed due to the large property variation in natural fibers. In this study, techniques have been developed to minimize the effect of the said variations, which included the determination of a fiber useful length and critical length, and the utilization of controlled chemical treatment to remove unwanted fiber components that interfere in fiber-matrix interfacial bonding. The abaca fiber was determined to have a diameter of 190 + 2 mm in about two-thirds of the fiber length in the middle section. A large variation in fiber diameter was observed at the root and tip sections such that the diameter could be as high as 200 mm at the root while the tip tapers to 110 to 165 mm. The useful length with constant diameter was determined to be about 2000 mm at the middle section. The critical length of this useful length was found to be 3.15 mm. The tensile strength was also determined to have an average of 970 MPa when measured at 15 mm gauge lengths but is found to decrease up to 796 MPa with increasing gauge lengths up to 35 mm. This superior tensile strength of abaca is also associated to the 2-3o microfibril misorientation from the axis of the fiber. Use of the fibers in composite as continuous and unidirectional filler at 5% loading to unsaturated polyester (tensile strength of 40 MPa) resulted to a tensile strength of 48 MPa. The tensile strength increased to 71 MPa when chemically treated continuous fiber was employed. Alkali treatment at relatively high temperature improved the surface morphology of the fiber, with waxes and lignin removed from the surface and activating the surface with hydroxyl functional groups, that essentially improved the wettability of the polymer to the fiber, and densified the fiber with the closure of its lumens.

scholarly journals Experimental Study on the Sound Absorption Properties of Finger Millet Straw, Darbha, and Ripe Bulrush Fibers

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
K. M. Rakesh ◽  
Ramachandracharya Srinidhi ◽  
S. Gokulkumar ◽  
K. S. Nithin ◽  
S. Madhavarao ◽  
...  
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Finger Millet ◽  
Natural Fiber ◽  
Fiber Type ◽  
Natural Fibers ◽  
Noise Pollution ◽  
Sound Absorption Coefficient ◽  
Human Beings ◽  
Fiber Arrangement

Nowadays, emerging noise pollution by external factors causes harmful diseases in human beings. The development of a bio-based filler or panel will help to eliminate some unwanted noise in working places and living rooms. This work aimed to develop an ecowaste fiber (leftover after harvesting)-based sound absorber and analyze its capabilities for sound absorption. The ecowaste fibers are collected by the gleaning process, i.e., the process of collecting leftovers from fields. The sound absorption capabilities of three natural fibers extracted from Eleusine coracana (Finger millet) straw, Desmostachya bipinnata (Darbha), and Typha domingensis (Ripe bulrush) plants are investigated in this study, both individually and in hybrid combinations. The sound absorption property mainly depends on factors such as porosity, flow resistivity, thickness, density, and tortuosity. Fiber length and fiber type play a significant role when fibers are arranged individually or in hybrid combinations. The stacking effect on the sound absorption coefficient of hybridized fiber arrangement was experimentally analyzed. The sound absorption coefficient (α) was found to be lower in the range of 1000 Hz–2500 Hz for all the combinations. As a homogenous fiber arrangement, the darbha fiber exhibited the better NRC (noise reduction coefficient) of 0.86 for 50 mm thickness among three different fibers and as a hybrid composition, ripe bulrush and darbha fibers exhibited NRC of 0.90 which is more capable of absorbing sound in the critical frequency range of 500 to 2000 Hz. These types of natural fiber fillers are highly capable of better sound absorbing and used in the applications such as classrooms, sound recording rooms, and theatres.

scholarly journals High sound absorption of polyester composites / fiber hemp / nanocellulose for automotive interior materials

2020 ◽  
Vol 2 (2) ◽  
pp. 170-174
Keyword(s):  
Composite Material ◽  
Composite Materials ◽  
Sound Absorption ◽  
Natural Fiber ◽  
Transmission Loss ◽  
Sound Transmission ◽  
Sound Transmission Loss ◽  
Hemp Fiber ◽  
The Matrix ◽  
Polyester Composite

Human health and environmental comfort are disturbed by the presence of noise, especially in cars, so that effective sound-absorbing materials are currently being developed. To answer the problem of noise in car interiors, polyester composite materials with local hemp fiber and nanocellulose reinforcement were developed. Natural fiber is biodegradable and renewable, and acts as an alternative to the use of synthetic fibers. The method used for the composite material manufacturing process was the casting method. The matrix of the composite material was polyester, while the reinforcement was a combination of local hemp fiber and nanocellulose fiber. Alkalization and non-alkalization processes have been carried out on hemp fiber. The composition of nanocellulose was 0%, 1%, and 3%. The characterization applied in this research were SEM test, FTIR test, sound transmission loss test, and density test. Optimal results were obtained on hemp fiber reinforced polyester composite materials without alkalization and without nanocellulose. Sound transmission loss (STL) was 61.91 dB up to 68.52 dB for the frequency range of 630 Hz to 125 Hz. The standard noise limit on 8-passenger passenger's four-wheeled vehicles is 77-80 dB. Based on the results obtained, the sound absorption is good. The density of this composite material was obtained at 0.989 gram/cm3. This composite material has the potential for developing dashboard material.

Sign in / Sign up

Export Citation Format

Share Document