scholarly journals Unsteady squeezing flow of magnetohydrodynamic carbon nanotube nanofluid in rotating channels with entropy generation and viscous dissipation

2019 ◽  
Vol 11 (1) ◽  
pp. 168781401882310 ◽  
Author(s):  
Abdullah Dawar ◽  
Zahir Shah ◽  
Waris Khan ◽  
Muhammad Idrees ◽  
Saeed Islam
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Velocity Profile ◽  
Physical Properties ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Rotation Parameter ◽  
Squeezing Flow ◽  
Nanoparticle Volume Fraction

The most favorable gift of modern science is nanofluid. The nanofluid can able to move freely through micro channels with the spreading of nanoparticles. Due to improved convection between the base liquid surfaces and nanoparticles, the nano suspensions express high thermal conductivity. Also, the benefits of suspending nanoparticles in base fluids are increased heat capacity, surface area, effective thermal conductivity, collision, and interaction among particles. This research aim to study squeezing flow of carbon nanotubes based on water (H2O) in rotating channels. Entropy generation is evaluated and for this purpose, second law of thermodynamics is employed. The influences of thermal radiation, viscous dissipation, and applied magnetic field on nanofluid are taken into account. The flow of the nanofluid is considered in unsteady three dimensions. The transformed ordinary differential equations (ODEs) are solved by homotopy analysis method with the help of similarity variables. Results obtained for single and multi-wall carbon nanotubes are compared. Plots have been presented in order to examine how the velocities, temperature, and entropy profiles become affected by numerous physical parameters. Generally, the velocity profiles escalate when the upper plate of the channel moves toward the lower stretching one and reduces when the upper plate is moving away from the lower one. The velocity profile in y-direction escalates with the escalation in nanoparticle volume fraction and suction parameter while the rotation parameter bids dual behavior with the escalating values. The velocity profile in x-direction bids the oscillatory behavior with the enhancement in nanoparticle volume fraction, rotation parameter, and magnetic parameter. The physical properties of carbon nanotubes, thermo physical properties of carbon nanotubes and nanofluid of some base fluids, and thermal conductivity of carbon nanotubes with different volume fractions are shown through tables.

Viscous Dissipation Effect on Entropy Generation of Nanofluid Flow in Microchannels

2013 ◽  
Author(s):  
Tiew Wei Ting ◽  
Yew Mun Hung ◽  
Ningqun Guo
Keyword(s):  
Forced Convection ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Second Law Of Thermodynamics ◽  
Nanoparticle Volume Fraction ◽  
Fluid Friction ◽  
Closed Form Solutions ◽  
Dissipation Effect ◽  
Dissipation Term

An analytical study of the viscous dissipation effect on entropy generation of forced convection of water-alumina nanofluid in a circular microchannel subjected to exponential wall heat flux is reported. Closed form solutions of the temperature distributions in the streamwise direction for the models with and without viscous dissipation term in the energy equation are obtained. The two models are compared by analyzing their relative deviations in entropy generation for different Reynolds number and nanoparticle volume fraction. The incorporation of viscous dissipation prominently affects the temperature distribution and consequently the entropy generation. The increase in the entropy generation is mainly attributable to the increase in the fluid friction irreversibility. The addition of nanoparticle increases the effective thermal conductivity and viscosity of nanofluid which induces escalation in the heat transfer and fluid friction irreversibilities, respectively. By taking the viscous dissipation effect into account, the exergetic effectiveness for forced convection of nanofluid in microchannels attenuate with increasing nanoparticle volume fraction. From the aspect of the second law of thermodynamics, the widespread conjecture that nanofluids possess advantage over pure fluid associated with higher overall effectiveness is invalidated.

Ciliary Flow of Casson Nanofluid with the Influence of MHD having Carbon Nanotubes

2020 ◽  
Vol 16 ◽  
Author(s):  
Adel Alblawi ◽  
Saba Keyani ◽  
S. Nadeem ◽  
Alibek Issakhov ◽  
Ibrahim M. Alarifi
Keyword(s):  
Carbon Nanotubes ◽  
Velocity Profile ◽  
Pressure Gradient ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Pressure Rise ◽  
Shear Stresses ◽  
Left Wall ◽  
Coupled Equations ◽  
The Right

Objective: In this paper, we consider a model that describes the ciliary beating in the form of metachronal waves along with the effects of Magnetohydrodynamic fluid over a curved channel with slip effects. This work aims at evaluating the effect of Magnetohydrodynamic (MHD) on the steady two dimensional (2-D) mixed convection flow induced in carbon nanotubes. The work is done for both the single wall nanotube and multiple wall nanotube. The right wall and the left wall possess a metachronal wave that is travelling along the outer boundary of the channel. Methods: The wavelength is considered as very large for cilia induced MHD flow. The governing linear coupled equations are simplified by considering the approximations of long wavelength and small Reynolds number. Exact solutions are obtained for temperature and velocity profile. The analytical expressions for the pressure gradient and wall shear stresses are obtained. Term for pressure rise is obtained by applying Numerical integration method. Results: Numerical results of velocity profile are mentioned in a table form, for various values of solid volume fraction, curvature, Hartmann number [M] and Casson fluid parameter [ζ]. Final section of this paper is devoted to discussing the graphical results of temperature, pressure gradient, pressure rise, shear stresses and stream functions. Conclusion: Velocity profile near the right wall of the channel decreases when we add nanoparticles into our base fluid, whereas an opposite behaviour is depicted near the left wall due to ciliated tips whereas the temperature is an increasing function of B and ߛ and decreasing function of ߶.

scholarly journals Entropy generation of a hybrid nanofluid on MHD mixed convection is a lid-driven cavity with partial heating having two rounded corners

2021 ◽  
Vol 321 ◽  
pp. 02004
Author(s):  
Zakaria Korei ◽  
Smail Benissaad
Keyword(s):  
Thermal Conductivity ◽  
Reynolds Number ◽  
Mixed Convection ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Object Oriented ◽  
Reynolds Numbers ◽  
Hybrid Nanofluid ◽  
Driven Cavity ◽  
Partial Heating

This research aims to investigate thermal and flow behaviors and entropy generation of magnetohydrodynamic Al2O3-Cu/water hybrid nanofluid in a lid-driven cavity having two rounded corners. A solver based on C ++ object-oriented language was developed where the finite volume was used. Parameter’s analysis is provided by varying Reynolds numbers (Re), Hartmann numbers (Ha), the volume fraction of hybrid nanofluid (ϕ), radii of the rounded corners. The findings show that reducing the radii of the rounded corners minimizes the irreversibility. Furthermore, the thermal conductivity and dynamic viscosity of hybrid nanofluid contribute to increasing the irreversibility. Finally, the entropy generation is decreased by increasing the Hartman number and increases by rising the Reynolds number.

Thermo-Physical Properties of Copper Matrix Composites Reinforced with 3D-SiC Network

2010 ◽  
Vol 150-151 ◽  
pp. 144-149
Author(s):  
Hong Wei Xing ◽  
Jin Song Zhang ◽  
Xiao Ming Cao
Keyword(s):  
Thermal Conductivity ◽  
Physical Properties ◽  
Room Temperature ◽  
Volume Fraction ◽  
Copper Matrix ◽  
High Thermal Stability ◽  
Matrix Composites ◽  
Copper Matrix Composites ◽  
Specific Heat Capacities ◽  
Thermo Physical Properties

Copper matrix composites reinforced with 3D-SiC network (15v% and 20v% SiC) were fabricated by squeezing copper alloy into 3D-SiC network preforms. The thermo-physical properties of the copper matrix composites were investigated. The specific heat capacities of the composites were about 0.39~0.50 J•g-1•K-1. The coefficients of thermal expansion (CTEs) of the composites were found to be lower than 6.9×10-6 -1 at Room Temperature. The composites exhibited high thermal stability for 3D-SiC network advent. The thermal conductivity of the composites was in the range of 50~80W•m−1•K−1. The thermo-physical properties of Cu matrix composites had a great relationship with the structures of 3D-SiC network preforms. The thermal conductivity of the composites decreased with an increase in the volume fraction of SiC or the structures of the limbs changing compacted, but the CTEs were not completely according this rule.

Study on the In Situ Growth of Carbon Nanotubes for the Reinforcement of Cf/SiC Composite Fabricated by CVI+PIP Process

2013 ◽  
Vol 745-746 ◽  
pp. 582-586 ◽  
Author(s):  
Jian Bao Hu ◽  
Shao Ming Dong ◽  
Xiang Yu Zhang ◽  
Zhen Wang ◽  
Hai Jun Zhou ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Bonding Strength ◽  
Volume Fraction ◽  
Interfacial Bonding ◽  
Mechanical And Thermal Properties ◽  
Fiber Volume ◽  
Pull Out ◽  
Interfacial Bonding Strength

Cf/SiC composites were fabricated through in situ growth of carbon nanotubes (CNTs) on three-dimensional needle-punched carbon fabric via chemical vapor deposition and polymer impregnation and pyrolysis process. The mechanical and thermal properties of the composites were investigated. The flexural strength and fracture toughness were decreased due to the fiber volume fraction loss and much shorter pull-out length of fibers which was caused by the higher interfacial bonding strength between fiber and matrix after the growth of CNTs. Brittle fracture character of CNTs was observed due to the strong interfacial bonding strength between CNTs and matrix. The parallel thermal conductivity and perpendicular thermal conductivity were improved to 14.5% and 8.0% respectively.

Thermal Conductivity Measurement for Carbon-Nanotube Suspensions with 3ω Method

2009 ◽  
Vol 60-61 ◽  
pp. 394-398 ◽  
Author(s):  
Gen Sheng Wu ◽  
Jue Kuan Yang ◽  
Shu Lin Ge ◽  
Yu Juan Wang ◽  
Min Hua Chen ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Volume Fraction ◽  
Aqueous Suspension ◽  
Conductivity Measurement ◽  
3Ω Method ◽  
Conductivity Enhancement ◽  
Multi Walled Carbon Nanotubes ◽  
The Stability ◽  
Walled Carbon Nanotubes

The stable and homogeneneous aqueous suspension of carbon nanotubes was prepared in this study. The stability of the nanofluids was improved greatly due to the use of a new dispersant, humic acid. The thermal conductivity of the aqueous suspension was measured with the 3ω method. The experimental results showed that the thermal conductivity of the suspensions increases with the temperature and also is nearly proportional to the loading of the nanoparticles. The thermal conductivity enhancement of single-walled carbon nanotubes (SWNTs) suspensions is better than that of the multi-walled carbon nanotubes (MWNTs) suspensions. Especially for a volume fraction of 0.3846% SWNTs, the thermal conductivity is enhanced by 40.5%. Furthermore, the results at 30°C match well with Jang and Choi’s model.

scholarly journals Fluid Flow and Entropy Generation Analysis of Al2O3–Water Nanofluid in Microchannel Plate Fin Heat Sinks

Entropy ◽  
2019 ◽  
Vol 21 (8) ◽  
pp. 739 ◽  
Author(s):  
Hao Ma ◽  
Zhipeng Duan ◽  
Liangbin Su ◽  
Xiaoru Ning ◽  
Jiao Bai ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Pressure Drop ◽  
Aspect Ratio ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Microchannel Plate ◽  
Heat Sinks ◽  
Entropy Generation Rate ◽  
Nanoparticle Volume Fraction ◽  
Channel Aspect Ratio

The flow in channels of microdevices is usually in the developing regime. Three-dimensional laminar flow characteristics of a nanofluid in microchannel plate fin heat sinks are investigated numerically in this paper. Deionized water and Al2O3–water nanofluid are employed as the cooling fluid in our work. The effects of the Reynolds number (100 < Re < 1000), channel aspect ratio (0 < ε < 1), and nanoparticle volume fraction (0.5% < Φ < 5%) on pressure drop and entropy generation in microchannel plate fin heat sinks are examined in detail. Herein, the general expression of the entropy generation rate considering entrance effects is developed. The results revealed that the frictional entropy generation and pressure drop increase as nanoparticle volume fraction and Reynolds number increase, while decrease as the channel aspect ratio increases. When the nanoparticle volume fraction increases from 0 to 3% at Re = 500, the pressure drop of microchannel plate fin heat sinks with ε = 0.5 increases by 9%. It is demonstrated that the effect of the entrance region is crucial for evaluating the performance of microchannel plate fin heat sinks. The study may shed some light on the design and optimization of microchannel heat sinks.

Thermal Transport Properties of Nanofluids Containing Carbon Nanotubes

2008 ◽  
Author(s):  
Huaqing Xie ◽  
Lifei Chen ◽  
Yang Li ◽  
Wei Yu
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Base Fluid ◽  
Volume Fraction ◽  
Thermal Conductivity Enhancement ◽  
Mechanochemical Reaction ◽  
Multiwalled Carbon ◽  
Conductivity Enhancement ◽  
Lower Viscosity ◽  
Potential Applications

Multiwalled carbon nanotubes (CNTs) have been treated by using a mechanochemical reaction method to enhance their dispersibility for producing CNT nanofluids. The thermal conductivity was measured by a short hot wire technique and the viscosity was measured by a rotary viscometer. The thermal conductivity enhancement reaches up to 17.5% at a volume fraction of 0.01 for an ethylene glycol based nanofluid. Temperature variation was shown to have no obvious effects on the thermal conductivity enhancement for the as prepared nanofluids. With an increase in the thermal conductivity of the base fluid, the thermal conductivity enhancement of a nanofluid decreases. At low volume fractions (<0.4 Vol%), nanofluids have lower viscosity than the corresponding base fluid due to lubricative effect of nanoparticles. When the volume fraction is higher than 0.4 Vol%, the viscosity increases with nanoparticle loadings. The prepared nanofluids, with no contamination to medium, good fluidity, stability, and high thermal conductivity, would have potential applications as coolants in advanced thermal systems.

Impact of heat generation/absorption on heat and mass transfer of nanofluid over rotating disk filled with carbon nanotubes

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Patakota Sudarsana Reddy ◽  
Paluru Sreedevi ◽  
Kavaturi Venkata Suryanarayana Rao
Keyword(s):  
Carbon Nanotubes ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Heat Generation ◽  
Volume Fraction ◽  
Rotating Disk ◽  
Numerical Code ◽  
Nanoparticle Volume Fraction ◽  
Slip Parameter ◽  
Content Type

Purpose The purpose of this paper is to know the influence of heat generation/absorption and slip effects on heat and mass transfer flow of carbon nanotubes – water-based nanofluid over a rotating disk. Two types of carbon nanotubes, single and multi-walled, are considered in this analysis. Design/methodology/approach The non-dimensional system of governing equations is constructed using compatible transformations. These equations together with boundary conditions are solved numerically by using the most prominent Finite element method. The influence of various pertinent parameters such as magnetic parameter (0.4 – 1.0), nanoparticle volume fraction parameter (0.1 – 0.6), porosity parameter (0.3 – 0.6), radiation parameter (0.1 – 0.4), Prandtl number (2.2 – 11.2), space-dependent (−3.0 – 3.0), temperature-dependent (−3.0 – 1.5), velocity slip parameter (0.1 – 1.0), thermal slip parameter (0.1 – 0.4) and chemical reaction parameter (0.3 – 0.6) on nanofluids velocity, temperature and concentration distributions, as well as rates of velocity, temperature and concentration is calculated and the results are plotted through graphs and tables. Also, a comparative analysis is carried out to verify the validation of the present numerical code and found good agreement. Findings The results indicate that the temperature of the fluid elevates with rising values of nanoparticle volume fraction parameter. Furthermore, the rates of heat transfer rise from 4.8% to 14.6% when carbon nanotubes of 0.05 volume fraction are suspended into the base fluid. Originality/value The work carried out in this analysis is original and no part is copied from other sources.

Analysis of entropy generation and natural convection in an inclined partially porous layered cavity filled with a nanofluid

2017 ◽  
Vol 95 (3) ◽  
pp. 238-252 ◽  
Author(s):  
T. Armaghani ◽  
Muneer A. Ismael ◽  
Ali J. Chamkha
Keyword(s):  
Natural Convection ◽  
Rayleigh Number ◽  
Layer Thickness ◽  
Porous Layer ◽  
Entropy Generation ◽  
Thermal Performance ◽  
Volume Fraction ◽  
Numerical Study ◽  
Nanoparticle Volume Fraction ◽  
Thermodynamic Irreversibility

The present numerical study investigates the analysis of thermodynamic irreversibility generation and the natural convection in inclined partially porous layered cavity filled with a Cu–water nanofluid. The finite difference method with up-wind scheme is used to solve the governing equations. The study is achieved by examining the effects of nanoparticle volume fraction, inclination angle, and the porous layer thickness. Besides, the computations are achieved within the laminar range of the Rayleigh number. The results show that at Ra = 104, a reduction of total entropy generation is recorded with increasing nanoparticle volume fraction when the porous layer thickness is greater than 0.2. Moreover, when Ra is less than 105, the nanoparticle volume fraction increases the heat transfer irreversibility, and improves the overall thermal performance. It is found also that for a low Rayleigh number, the largest porous layer thickness and the highest cavity orientation improve the thermal performance. On the contrary, at high Rayleigh numbers, these parameter ranges give the worst thermal performance.

Sign in / Sign up

Export Citation Format

Share Document