Authigenic palygorskite in Miocene sediments in Linxia basin, Gansu, northwestern China

Clay Minerals ◽  
2007 ◽  
Vol 42 (1) ◽  
pp. 45-58 ◽  
Author(s):  
H. L. Hong ◽  
N. Yu ◽  
P. Xiao ◽  
Y. H. Zhu ◽  
K. X. Zhang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Clay Mineral ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mineral Particles ◽  
Transmission Electron ◽  
Mineralogical Characteristics ◽  
Linxia Basin ◽  
Hydrolysis Of ◽  
Scanning Electron

AbstractThe mineralogical characteristics of authigenic palygorskite occurring with chlorite and illite in Miocene sediments in Linxia basin were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM). The XRD results suggest that the mineral composition of the sediments includes mainly quartz, chlorite, illite, calcite, plagioclase, orthoclase, minor palygorskite and small amounts of gypsum and ankerite. Two kinds of palygorskite were observed in the sediments, relatively straight fibrous particles found in matted, felted masses associated with platy chlorite and silky aggregates found in the void spaces. The former probably replaces chlorite grains, growing from the edges or the fissures of chlorite particles. Chlorite grains exhibit bay-shaped or rounded edges, with ambiguous felted boundaries between chlorite particles, indicative of an intensive dissolution process and the growth of palygorskite at the expense of chlorite. Palygorskite is also observed as inclusions within calcite, sprouting from or coating calcite surfaces, suggesting that palygorskite crystallized from solution. The textural relations of palygorskite and the occurrence of ankerite and the characteristically Fe-bearing palygorskite in the sediments suggest the destruction and hydrolysis of chlorite. The ankerite seems to be preferentially present in the void spaces, closely associated with chlorite and illite; fibrous palygorskite crystallizes at the edges of these clay mineral particles and the platy clay mineral particles are gradually replaced by fibrous palygorskite crystals, suggesting that alteration of chlorite to palygorskite involves an interaction with water during the diagenetic process.

Characteristics of halloysite associated with rectorite from Hubei, China

2006 ◽  
Vol 70 (3) ◽  
pp. 257-264 ◽  
Author(s):  
H.-L. Hong ◽  
J.-X. Mi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Mineral Assemblage ◽  
Nanometer Scale ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Mineralogical Characteristics ◽  
Water Saturated ◽  
Scanning Electron

AbstractThe mineralogical characteristics of halloysite in rectorite pelite in the Zhongxiang area, Hubei, China, were investigated using X-ray diffraction, scanning electron microscopy and high-resolution transmission electron microscopy methods. The results show that halloysite crystals exhibit euhedral lamellar, tubular or club-like, and needle-like or fibre-like morphologies, indicating that they crystallized from a significantly water-saturated environment. The mineral assemblage of the rectorite pelite is rectorite, halloysite, illite, gypsum, pyrite and rutile, suggesting a weak supergene alteration. Several features related to crystallization of halloysite were noted. Growth of halloysite on rectorite edge surfaces in voids and twins of halloysite on a nanometer scale with composition plane (110) were found in the Zhongxiang rectorite pelite, and, in particular, the tapered ends of tubes suggest that halloysite crystallized from solution. Disaggregation of lamellar halloysite particles into parallel clusters of single tubular halloysite crystals suggests that because of significant [H2O] activity in the environment, halloysite may have been derived from the alteration of rectorite.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

The Effect of the Microstructure of Diffusion Barriers on the Palladium Activation for Electroless Copper Deposition

2002 ◽  
Vol 716 ◽  
Author(s):  
Seok Woo Hong ◽  
Yong Sun Lee ◽  
Ki-Chul Park ◽  
Jong-Wan Park
Keyword(s):  
Electron Microscopy ◽  
Diffusion Barriers ◽  
Copper Deposition ◽  
X Ray Diffraction ◽  
Plan View ◽  
X Ray ◽  
Transmission Electron ◽  
Electroless Copper ◽  
Sheet Resistance Measurement ◽  
Scanning Electron

AbstractThe effect of microstructure of dc magnetron sputtered TiN and TaN diffusion barriers on the palladium activation for autocatalytic electroless copper deposition has been investigated by using X-ray diffraction, sheet resistance measurement, field emission scanning electron microscopy (FE-SEM) and plan view transmission electron microscopy (TEM). The density of palladium nuclei on TaN diffusion barrier increases as the grain size of TaN films decreases, which was caused by increasing nitrogen content in TaN films. Plan view TEM results of TiN and TaN diffusiton barriers showed that palladium nuclei formed mainly on the grain boundaries of the diffusion barriers.

scholarly journals Leaching of Chalcopyrite under Bacteria–Mineral Contact/Noncontact Leaching Model

Minerals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 230
Author(s):  
Pengcheng Ma ◽  
Hongying Yang ◽  
Zuochun Luan ◽  
Qifei Sun ◽  
Auwalu Ali ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Surface Passivation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Leaching Process ◽  
Copper Leaching ◽  
Hydrolysis Of ◽  
Leaching Efficiency ◽  
Leaching Models ◽  
Scanning Electron

Bacteria–mineral contact and noncontact leaching models coexist in the bioleaching process. In the present paper, dialysis bags were used to study the bioleaching process by separating the bacteria from the mineral, and the reasons for chalcopyrite surface passivation were discussed. The results show that the copper leaching efficiency of the bacteria–mineral contact model was higher than that of the bacteria–mineral noncontact model. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FTIR) were used to discover that the leaching process led to the formation of a sulfur film to inhibit the diffusion of reactive ions. In addition, the deposited jarosite on chalcopyrite surface was crystallized by the hydrolysis of the excess Fe3+ ions. The depositions passivated the chalcopyrite leaching process. The crystallized jarosite in the bacteria EPS layer belonged to bacteria–mineral contact leaching system, while that in the sulfur films belonged to the bacteria–mineral noncontact system.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Synthesis and Study the Properties of a Solar Cell of Gold Nanoparticles Prepared in a Simple Chemical Way

2021 ◽  
Vol 19 (11) ◽  
pp. 66-71
Author(s):  
Maithm A. Obaid ◽  
Suha A Fadaam ◽  
Osama S. Hashim
Keyword(s):  
Electron Microscopy ◽  
Gold Nanoparticles ◽  
Chemical Method ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Casting Method ◽  
X Ray ◽  
Transmission Electron ◽  
Simple Chemical ◽  
Scanning Electron

The aim of this study is to prepare gold nanoparticles by a simple chemical method at a temperature of 70°C. The solution was dried on glass basest by Casting method, the rate of five drops per sample At a temperature 100 C. Then the structural and optical properties have been confirmed by X-ray diffraction, scanning electron microscopy (SEM) and Transmission Electron microscope (TEM), Fourier Transform Infrared Spectroscopy (FTIR) and spectrum.

scholarly journals Chemical Stability of Ti3C2 MXene with Al in the Temperature Range 500–700 °C

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1979 ◽  
Author(s):  
Jing Zhang ◽  
Shibo Li ◽  
Shujun Hu ◽  
Yang Zhou
Keyword(s):  
Electron Microscopy ◽  
Chemical Stability ◽  
Metal Matrix ◽  
Matrix Composites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Temperature Range ◽  
Transmission Electron ◽  
Work First ◽  
Scanning Electron

Ti3C2Tx MXene, a new 2D nanosheet material, is expected to be an attractive reinforcement of metal matrix composites because its surfaces are terminated with Ti and/or functional groups of –OH, –O, and –F which improve its wettability with metals. Thus, new Ti3C2Tx/Al composites with strong interfaces and novel properties are desired. To prepare such composites, the chemical stability of Ti3C2Tx with Al at high temperatures should be investigated. This work first reports on the chemical stability of Ti3C2Tx MXene with Al in the temperature range 500–700 °C. Ti3C2Tx is thermally stable with Al at temperatures below 700 °C, but it reacts with Al to form Al3Ti and TiC at temperatures above 700 °C. The chemical stability and microstructure of the Ti3C2Tx/Al samples were investigated by differential scanning calorimeter, X-ray diffraction analysis, scanning electron microscopy, and transmission electron microscopy.

Influence of Salt Aid on Combustion Synthesis of Nanocrystalline CeO2 Powders

2011 ◽  
Vol 412 ◽  
pp. 5-8 ◽  
Author(s):  
Ying Zhang ◽  
Ai Chen ◽  
Hai Rong Wang ◽  
Ze Song Li ◽  
Ying Ping Shen
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Combustion Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Particle Characteristics ◽  
Transmission Electron ◽  
Nanocrystalline Ceria ◽  
Scanning Electron

The present article reports the results of studies related to the synthesis of nanocrystalline ceria powder by combustion process using salt combustion aid. Cerium nitrate as oxidant and urea as fuel were used as reagents, Sodium Chloride was compared as combustion aid. The phase analysis and particle size were compared. The product was characterized by X-ray diffraction, Scanning electron microscopy and Transmission electron microscopy. The results showed that employment of starting fuel with combustion aid resulted in synthesizing nanocrystalline ceria powder with fine agglomerates. By using combustion aid, the energetics of the combustion reaction and particle characteristics have been changed.

scholarly journals Mechanical Activation of Smectite-Based Nanocomposites for Creation of Smart Fertilizers

2022 ◽  
Vol 12 (2) ◽  
pp. 809
Author(s):  
Maxim Rudmin ◽  
Santanu Banerjee ◽  
Boris Makarov ◽  
Kanipa Ibraeva ◽  
Alexander Konstantinov
Keyword(s):  
Electron Microscopy ◽  
Interlayer Space ◽  
Soil Leaching ◽  
X Ray Diffraction ◽  
Activation Time ◽  
Release Rates ◽  
X Ray ◽  
Weight Losses ◽  
Transmission Electron ◽  
Scanning Electron

This research presents the mechanical creation of smart fertilizers from a mixture of smectite and urea in a 3:2 ratio by using the planetary milling technique. The smectite–urea composites show intercalation between urea and mineral, which increases steadily with increasing activation time. A shift of X-Ray Diffraction basal reflections, intensities of Fourier transform infrared spectroscopy (FTIR) peaks, and weight losses in thermogravimetric analysis (TG) document the systematic crystallo-chemical changes of the composites related to nitrogen interaction with activation. Observations of the nanocomposites by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) corroborate the inference. Nitrogen intercalates with smectite in the interlayer space and remains absorbed either within micro-aggregates or on the surface of activated smectites. Soil leaching tests reveal a slower rate of nitrogen than that of traditional urea fertilizers. Different forms of nitrogen within the composites cause their differential release rates to the soil. The formulated nanocomposite fertilizer enhances the quality and quantity of oat yield.

Synthesis and characterization of homogeneous lead-substituted tin oxide with the (110) face of rutile structure

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.

Sign in / Sign up

Export Citation Format

Share Document