Large-Scale Production of Autologous CD14+-Monocyte Derived Dendritic Cells Co-Electroporated with Amplified Total Tumour mRNA and Human CD40L mRNA in Patients with B-Cell Chronic Lymphocytic Leukemia.

Blood ◽  
2006 ◽  
Vol 108 (11) ◽  
pp. 3720-3720
Author(s):  
Graeme Fraser ◽  
Don Healey ◽  
Juan Carlos Rodriguez-Lecompte ◽  
Kalathil Suresh ◽  
Pamela O’Hoski ◽  
...  

Abstract BACKGROUND: B-cell chronic lymphocytic leukemia (CLL) is currently incurable with conventional chemotherapeutic approaches. The induction of specific anti-CLL immune responses in vitro using autologous tumour-antigen loaded dendritic cell (DC)-based approaches has been previously demonstrated. The aim of this study was to optimize and validate large-scale production of an autologous DC vaccine prior to initiation of a planned Phase I/II clinical trial for patients with previously treated CLL. STUDY DESIGN: Following informed consent, 8 patients with confirmed CLL had 11 leukapheresis collections for mononuclear cells performed between April 2005 and May 2006. Methods for vaccine production were optimized during an initial cohort of CLL patients (N=7); production methods ‘at scale’ were subsequently confirmed with a validation cohort (N=3). METHODS: Leukemic B-cells were positively selected (CD19+/CD5+) and preserved in RNAlater™ prior to overnight shipment to Argos Therapeutics Inc (Durham, NC); amplified patient specific total tumour mRNA and huCD40L mRNA were subsequently supplied by Argos for final vaccine formulation. CD14+ monocytes were positively selected using a CliniMACS device (Miltenyi Biotech, Germany). Purified monocytes were subsequently cultured for 5 days in growth medium containing IL-4 and GM-CSF; DCs were matured with addition of TNF-β, IFN-γ, and PGE2 on day 5. DCs were harvested on day 6, co-electroporated with autologous total tumour RNA and huCD40L RNA, and cryopreserved for subsequent analysis. RESULTS: Mean patient age was 62 years, 6/8 were male, and all had Rai clinical stage I, previously untreated disease; mean peripheral white blood cell count was 17.2 × 109/L (range 7.4 – 26.7 × 109/L). Mean CD14+ monocyte yield post-CliniMACS selection was 2.42 × 109 cells (range 1.51 – 3.53 × 109) and monocyte purity was high (mean 96.5%, range 80 – 99.7%). In the validation cohort, day 6 immunophenotype (mean, range), measured 4 hours post-electroporation, was consistent with mature, activated DCs: CD14+ 2.5% (1.21–5.00), CD80+ 98.2% (98.0–99.7), CD83+ 87.5% (78.0 – 94.7), and CD86+ 99.5% (99.0–99.9). Mean CD40L expression, a surrogate marker for electroporation efficiency, was 80.3% (range 70.2 – 88.0); mean CD209 expression was 97.7% (95–99.7). Absolute numbers of DCs generated post-electroporation ranged from 1.26 × 108/L to 3.24 × 108/L and post-thaw DC viability ranged from 71–94%. T-cell co-culture experiments confirmed the generation of specific, autologous cytotoxic T-lymphocyte (CTL) responses to CLL targets, demonstrated by: (1) MHC class I restricted autologous CLL induced INF-γ response (intracellular staining), and (2) statistically significant functional MHC class I restricted CTL response (chromium-release assay). CONCLUSIONS: This study confirms the feasibility of generating large numbers of autologous CD14+-derived dendritic cells co-electroporated with patient specific total tumour RNA and huCD40L RNA from CLL patients. These data provide justification for a currently accruing Phase I/II clinical trial designed to evaluate this treatment in CLL patients that have a stable, low disease burden following at least one course of systemic chemotherapy.

2015 ◽  
Vol 23 ◽  
pp. S77
Author(s):  
Jian-Chang Liu ◽  
Chang-Yi Chen ◽  
Jingjing Ye ◽  
Giau Hua ◽  
Jing Chai ◽  
...  

1993 ◽  
Vol 32 (1) ◽  
pp. 129-131
Author(s):  
Naureen Talha

The literature on female labour in Third World countries has become quite extensive. India, being comparatively more advanced industrially, and in view of its size and population, presents a pictures of multiplicity of problems which face the female labour market. However, the author has also included Mexico in this analytical study. It is interesting to see the characteristics of developing industrialisation in two different societies: the Indian society, which is conservative, and the Mexican society, which is progressive. In the first chapter of the book, the author explains that he is not concerned with the process of industrialisation and female labour employed at different levels of work, but that he is interested in forms of production and women's employment in large-scale production, petty commodity production, marginal small production, and self-employment in the informal sector. It is only by analysis of these forms that the picture of females having a lower status is understood in its social and political setting.


2018 ◽  
Vol 15 (4) ◽  
pp. 572-575 ◽  
Author(s):  
Ponnusamy Kannan ◽  
Samuel I.D. Presley ◽  
Pallikondaperumal Shanmugasundaram ◽  
Nagapillai Prakash ◽  
Deivanayagam Easwaramoorthy

Aim and Objective: Itopride is a prokinetic agent used for treating conditions like non-ulcer dyspepsia. Itopride is administered as its hydrochloride salt. Trimethobenzamide is used for treating nausea and vomiting and administered as its hydrochloride salt. The aim is to develop a novel and environmental friendly method for large-scale production of itopride and trimethobenzamide. Materials and Methods: Itopride and trimethobenzamide can be prepared from a common intermediate 4- (dimethylaminoethoxy) benzyl amine. The intermediate is prepared from one pot synthesis using Phyrdroxybenzaldehye and zinc dust and further reaction of the intermediate with substituted methoxy benzoic acid along with boric acid and PEG gives itopride and trimethobenzamide. Results: The intermediate 4-(dimethylaminoethoxy) benzylamine is prepared by treating p-hydroxybenzaldehyde and 2-dimethylaminoethyl chloride. The aldehyde formed is treated with hydroxylamine hydrochloride. The intermediate is confirmed by NMR and the purity is analysed by HPLC. Conclusion: Both itopride and trimethobenzamide were successfully synthesized by this method. The developed method is environmental friendly, economical for large-scale production with good yield and purity.


Marine Drugs ◽  
2021 ◽  
Vol 19 (5) ◽  
pp. 241
Author(s):  
Shaden A. M. Khalifa ◽  
Eslam S. Shedid ◽  
Essa M. Saied ◽  
Amir Reza Jassbi ◽  
Fatemeh H. Jamebozorgi ◽  
...  

Cyanobacteria are photosynthetic prokaryotic organisms which represent a significant source of novel, bioactive, secondary metabolites, and they are also considered an abundant source of bioactive compounds/drugs, such as dolastatin, cryptophycin 1, curacin toyocamycin, phytoalexin, cyanovirin-N and phycocyanin. Some of these compounds have displayed promising results in successful Phase I, II, III and IV clinical trials. Additionally, the cyanobacterial compounds applied to medical research have demonstrated an exciting future with great potential to be developed into new medicines. Most of these compounds have exhibited strong pharmacological activities, including neurotoxicity, cytotoxicity and antiviral activity against HCMV, HSV-1, HHV-6 and HIV-1, so these metabolites could be promising candidates for COVID-19 treatment. Therefore, the effective large-scale production of natural marine products through synthesis is important for resolving the existing issues associated with chemical isolation, including small yields, and may be necessary to better investigate their biological activities. Herein, we highlight the total synthesized and stereochemical determinations of the cyanobacterial bioactive compounds. Furthermore, this review primarily focuses on the biotechnological applications of cyanobacteria, including applications as cosmetics, food supplements, and the nanobiotechnological applications of cyanobacterial bioactive compounds in potential medicinal applications for various human diseases are discussed.


Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.


Author(s):  
Yuting Luo ◽  
Zhiyuan Zhang ◽  
Fengning Yang ◽  
Jiong Li ◽  
Zhibo Liu ◽  
...  

Large-scale production of green hydrogen by electrochemical water splitting is considered as a promising technology to address critical energy challenges caused by the extensive use of fossil fuels. Although nonprecious...


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Rozina Rashid ◽  
Muhammad Sohail

AbstractThe capacity of different Bacillus species to produce large amounts of extracellular enzymes and ability to ferment various substrates at a wide range of pH and temperature has placed them among the most promising hosts for the industrial production of many improved and novel products. The global interest in prebiotics, for example, xylooligosaccharides (XOs) is ever increasing, rousing the quest for various forms with expanded productivity. This article provides an overview of xylanase producing bacilli, with more emphasis on their capacity to be used in the production of the XOs, followed by the purification strategies, characteristics and application of XOs from bacilli. The large-scale production of XOs is carried out from a number of xylan-rich lignocellulosic materials by chemical or enzymatic hydrolysis followed by purification through chromatography, vacuum evaporation, solvent extraction or membrane separation methods. Utilization of XOs in the production of functional products as food ingredients brings well-being to individuals by improving defense system and eliminating pathogens. In addition to the effects related to health, a variety of other biological impacts have also been discussed.


Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1706
Author(s):  
Zacharias Viskadourakis ◽  
Argiri Drymiskianaki ◽  
Vassilis M. Papadakis ◽  
Ioanna Ioannou ◽  
Theodora Kyratsi ◽  
...  

In the current study, polymer-based composites, consisting of Acrylonitrile Butadiene Styrene (ABS) and Bismuth Antimony Telluride (BixSb2−xTe3), were produced using mechanical mixing and hot pressing. These composites were investigated regarding their electrical resistivity and Seebeck coefficient, with respect to Bi doping and BixSb2-xTe3 loading into the composite. Experimental results showed that their thermoelectric performance is comparable—or even superior, in some cases—to reported thermoelectric polymer composites that have been produced using other complex techniques. Consequently, mechanically mixed polymer-based thermoelectric materials could be an efficient method for low-cost and large-scale production of polymer composites for potential thermoelectric applications.


Author(s):  
Di Li ◽  
Yingying Xing ◽  
Changjian Zhou ◽  
Yikai Lu ◽  
Shengjie Xu ◽  
...  

The high reaction energy barrier of the oxygen evolution reaction (OER) extremely reduces the efficiency of water splitting, which is not conducive to large-scale production of hydrogen. Due to the...


Sign in / Sign up

Export Citation Format

Share Document