scholarly journals Effectivity of homecare and professional biofilm removal procedures on initial supragingival biofilm on laser-microtextured implant surfaces in an ex vivo model

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Gordon John ◽  
Frank Schwarz ◽  
Alexandra Kravchenko ◽  
Michelle Alicia Ommerborn ◽  
Jürgen Becker
Keyword(s):  
Biofilm Formation ◽  
Ex Vivo ◽  
Tooth Brushing ◽  
The Other ◽  
Implant Surface ◽  
Structured Surfaces ◽  
Powder Blasting ◽  
Titanium Surfaces ◽  
Initial Biofilm ◽  
Titanium Aluminium

Abstract Background The aim of the current study was the evaluation of initial biofilm adhesion and development on laser-microtextured implant collar surfaces and the examination of effectivity of different biofilm management methods. Methods Initial biofilm formation was investigated on hydrophobic machined and laser-microtextured (Laser-Lok) titanium surfaces and hydrophobic machined and laser-microtextured (Laser-Lok) titanium aluminium vanadium surfaces and compared to hydrophobic smooth pickled titanium surfaces, hydrophilic smooth and acid etched titanium surfaces, hydrophobic sandblasted large grid and acid etched titanium surfaces (titanium Promote) via erythrosine staining and subsequent histomorphometrical analysis and scanning electron microscopic investigations. After decontamination procedures, performed via tooth brushing and glycine powder blasting, clean implant surface was detected via histomorphometrical analysis. Results After 24 h mean initial plaque area was detected in the following descending order: smooth pickled titanium > titanium Promote > hydrophilic smooth and acid etched titanium > Laser-Lok titanium > Laser-Lok titanium aluminium vanadium. The same order was determined after 48 h of biofilm formation. After glycine powder blasting all samples depicted almost 100% clean implant surface. After tooth brushing, Laser-Lok titanium (67.19%) and Laser-Lok titanium aluminium vanadium (69.80%) showed significantly more clean implant surface than the other structured surfaces, hydrophilic smooth and acid etched titanium (50.34%) and titanium Promote (33.89%). Smooth pickled titanium showed almost complete clean implant surface (98.84%) after tooth brushing. Conclusions Both Laser-Lok surfaces showed less initial biofilm formation after 24 and 48 h than the other implant surfaces. In combination with the significant higher clean implant surfaces after domestic decontamination procedure via tooth brushing, both Laser-Lok surfaces could be a candidate for modified implant and abutment designs, especially in transmucosal areas.

Modified Implant Surface with Slower and Less Initial Biofilm Formation

2013 ◽  
Vol 17 (3) ◽  
pp. 461-468 ◽  
Author(s):  
Gordon John ◽  
Jürgen Becker ◽  
Frank Schwarz
Keyword(s):  
Biofilm Formation ◽  
Implant Surface ◽  
Initial Biofilm

scholarly journals Oral Streptococci Biofilm Formation on Different Implant Surface Topographies

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Pedro Paulo Cardoso Pita ◽  
José Augusto Rodrigues ◽  
Claudia Ota-Tsuzuki ◽  
Tatiane Ferreira Miato ◽  
Elton G. Zenobio ◽  
...  
Keyword(s):  
Biofilm Formation ◽  
Surface Characterization ◽  
Bacterial Species ◽  
Oral Streptococci ◽  
Streptococcus Sobrinus ◽  
Implant Surface ◽  
Surface Topographies ◽  
Unstimulated Saliva ◽  
Titanium Surfaces

The establishment of the subgingival microbiota is dependent on successive colonization of the implant surface by bacterial species. Different implant surface topographies could influence the bacterial adsorption and therefore jeopardize the implant survival. This study evaluated the biofilm formation capacity of five oral streptococci species on two titanium surface topographies.In vitrobiofilm formation was induced on 30 titanium discs divided in two groups: sandblasted acid-etched (SAE-n=15) and as-machined (M-n=15) surface. The specimens were immersed in sterilized whole human unstimulated saliva and then in fresh bacterial culture with five oral streptococci species:Streptococcus sanguinis,Streptococcus salivarius,Streptococcus mutans,Streptococcus sobrinus, andStreptococcus cricetus. The specimens were fixed and stained and the adsorbed dye was measured. Surface characterization was performed by atomic force and scanning electron microscopy. Surface and microbiologic data were analyzed by Student’st-test and two-way ANOVA, respectively (P<0.05).S. cricetus,S. mutans,andS. sobrinusexhibited higher biofilm formation and no differences were observed between surfaces analyzed within each species (P>0.05).S. sanguinisexhibited similar behavior to form biofilm on both implant surface topographies, whileS. salivariusshowed the lowest ability to form biofilm. It was concluded that biofilm formation on titanium surfaces depends on surface topography and species involved.

Influence of the Periodontal Status on the Initial-Biofilm Formation on Titanium Surfaces

2014 ◽  
Vol 18 (1) ◽  
pp. 174-181 ◽  
Author(s):  
Miryam Martínez-Hernández ◽  
René Olivares-Navarrete ◽  
Argelia Almaguer-Flores
Keyword(s):  
Biofilm Formation ◽  
Periodontal Status ◽  
Titanium Surfaces ◽  
Initial Biofilm

scholarly journals The Impact of Dental Implant Surface Modifications on Osseointegration and Biofilm Formation

2021 ◽  
Vol 10 (8) ◽  
pp. 1641
Author(s):  
Stefanie Kligman ◽  
Zhi Ren ◽  
Chun-Hsi Chung ◽  
Michael Angelo Perillo ◽  
Yu-Cheng Chang ◽  
...  
Keyword(s):  
Dental Implant ◽  
Biofilm Formation ◽  
Bacterial Colonization ◽  
Surface Modifications ◽  
Implant Surface ◽  
Oral Rehabilitation ◽  
Surface Design ◽  
Polyether Ether Ketone ◽  
Dental Implant Surface ◽  
The Impact

Implant surface design has evolved to meet oral rehabilitation challenges in both healthy and compromised bone. For example, to conquer the most common dental implant-related complications, peri-implantitis, and subsequent implant loss, implant surfaces have been modified to introduce desired properties to a dental implant and thus increase the implant success rate and expand their indications. Until now, a diversity of implant surface modifications, including different physical, chemical, and biological techniques, have been applied to a broad range of materials, such as titanium, zirconia, and polyether ether ketone, to achieve these goals. Ideal modifications enhance the interaction between the implant’s surface and its surrounding bone which will facilitate osseointegration while minimizing the bacterial colonization to reduce the risk of biofilm formation. This review article aims to comprehensively discuss currently available implant surface modifications commonly used in implantology in terms of their impact on osseointegration and biofilm formation, which is critical for clinicians to choose the most suitable materials to improve the success and survival of implantation.

scholarly journals Prebiotic Combinations Effects on the Colonization of Staphylococcal Skin Strains

2020 ◽  
Vol 9 (1) ◽  
pp. 37
Author(s):  
Silvia Di Lodovico ◽  
Franco Gasparri ◽  
Emanuela Di Campli ◽  
Paola Di Fermo ◽  
Simonetta D’Ercole ◽  
...  
Keyword(s):  
Biofilm Formation ◽  
Commensal Bacteria ◽  
The Other ◽  
Bacteriostatic Effect ◽  
Skin Microbiota ◽  
Relevant Effect ◽  
Planktonic Phase ◽  
Species Specific ◽  
Biomass Quantification ◽  
General Reduction

Background: An unbalanced skin microbiota due to an increase in pathogenic vs. commensal bacteria can be efficiently tackled by using prebiotics. The aim of this work was to identify novel prebiotic combinations by exerting species-specific action between S. aureus and S. epidermidis strains. Methods: First, the antimicrobial/antibiofilm effect of Xylitol-XYL and Galacto-OligoSaccharides–GOS combined with each other at different concentrations (1, 2.5, 5%) against S. aureus and S. epidermidis clinical strains was evaluated in time. Second, the most species-specific concentration was used to combine XYL with Fructo-OligoSaccharides–FOS, IsoMalto-Oligosaccharides–IMO, ArabinoGaLactan–LAG, inulin, dextran. Experiments were performed by OD600 detection, biomass quantification and LIVE/DEAD staining. Results: 1% XYL + 1% GOS showed the best species-specific action with an immediate antibacterial/antibiofilm action against S. aureus strains (up to 34.54% ± 5.35/64.68% ± 4.77) without a relevant effect on S. epidermidis. Among the other prebiotic formulations, 1% XYL plus 1% FOS (up to 49.17% ± 21.46/37.59% ± 6.34) or 1% IMO (up to 41.28% ± 4.88/36.70% ± 10.03) or 1% LAG (up to 38.21% ± 5.31/83.06% ± 5.11) showed antimicrobial/antibiofilm effects similar to 1% XYL+1% GOS. For all tested formulations, a prevalent bacteriostatic effect in the planktonic phase and a general reduction of S. aureus biofilm formation without loss of viability were recorded. Conclusion: The combinations of 1% XYL with 1% GOS or 1% FOS or 1% IMO or 1% LAG may help to control the balance of skin microbiota, representing good candidates for topic formulations.

scholarly journals Motility activity, slime production, biofilm formation and genetic typing by ERIC-PCR for Pseudomonas aeruginosa strains isolated from bovine and other sources (human and environment)

2014 ◽  
Vol 17 (2) ◽  
pp. 321-329 ◽  
Author(s):  
K. Wolska ◽  
P. Szweda ◽  
K. Lada ◽  
E. Rytel ◽  
K. Gucwa ◽  
...  
Keyword(s):  
Biofilm Formation ◽  
Bovine Mastitis ◽  
Twitching Motility ◽  
Phenotypic Properties ◽  
Biofilm Production ◽  
Abiotic Surfaces ◽  
Hospital Patients ◽  
Relationship Of ◽  
Initial Biofilm ◽  
Different Sources

AbstractThe molecular-typing strategy, ERIC-PCR was used in an attempt to determine the genomic relationship of 28 P. aeruginosa strains isolated from faeces of healthy bovine, bovine mastitis and from faeces of hospital patients as well as from environment. ERIC-PCR fingerprinting revealed large molecular differentiation within this group of isolates. Twenty two out of 28 strains tested generated unique patterns of DNA bands and only three genotypes consisted of two isolates each were identified. We also tested the P. aeruginosa isolates for their ability to form a biofilm on abiotic surfaces including polyvinylchloride and polystyrene. Different biofilm-forming abilities were demonstrated among strains; however, most of them (64.3%) showed moderate-biofilm forming ability. The strains with increased swimming and twitching motility displayed elevated biofilm formation. However, a negative correlation was found between slime and initial biofilm production. On the basis of the results obtained, we suggest that there are no major differences in phenotypic properties between P. aeruginosa strains isolated from different sources

scholarly journals Biological and microbiological interactions of Ti-35Nb-7Zr alloy and its basic elements on bone marrow stromal cells: good prospects for bone tissue engineering

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Daphne de Camargo Reis Mello ◽  
Lais Morandini Rodrigues ◽  
Fabia Zampieri D’Antola Mello ◽  
Thais Fernanda Gonçalves ◽  
Bento Ferreira ◽  
...  
Keyword(s):  
Stem Cells ◽  
Bone Marrow ◽  
Cell Differentiation ◽  
Stromal Cells ◽  
Biofilm Formation ◽  
Bone Marrow Stromal Cells ◽  
Pure Titanium ◽  
Marrow Stromal Cells ◽  
The Other ◽  
Cell Based Therapy

Abstract Background An effective biomaterial for bone replacement should have properties to avoid bacterial contamination and promote bone formation while inducing rapid cell differentiation simultaneously. Bone marrow stem cells are currently being investigated because of their known potential for differentiation in osteoblast lineage. This makes these cells a good option for stem cell-based therapy. We have aimed to analyze, in vitro, the potential of pure titanium (Ti), Ti-35Nb-7Zr alloy (A), niobium (Nb), and zirconia (Zr) to avoid the microorganisms S. aureus (S.a) and P. aeruginosa (P.a). Furthermore, our objective was to evaluate if the basic elements of Ti-35Nb-7Zr alloy have any influence on bone marrow stromal cells, the source of stem cells, and observe if these metals have properties to induce cell differentiation into osteoblasts. Methods Bone marrow stromal cells (BMSC) were obtained from mice femurs and cultured in osteogenic media without dexamethasone as an external source of cell differentiation. The samples were divided into Ti-35Nb-7Zr alloy (A), pure titanium (Ti), Nb (niobium), and Zr (zirconia) and were characterized by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). After predetermined periods, cell interaction, cytotoxicity, proliferation, and cell differentiation tests were performed. For monotypic biofilm formation, standardized suspensions (106 cells/ml) with the microorganisms S. aureus (S.a) and P. aeruginosa (P.a) were cultured for 24 h on the samples and submitted to an MTT test. Results All samples presented cell proliferation, growth, and spreading. All groups presented cell viability above 70%, but the alloy (A) showed better results, with statistical differences from Nb and Zr samples. Zr expressed higher ALP activity and was statistically different from the other groups (p < 0.05). In contrast, no statistical difference was observed between the samples as regards mineralization nodules. Lower biofilm formation of S.a and P.a. was observed on the Nb samples, with statistical differences from the other samples. Conclusion Our results suggest that the basic elements present in the alloy have osteoinductive characteristics, and Zr has a good influence on bone marrow stromal cell differentiation. We also believe that Nb has the best potential for reducing the formation of microbial biofilms.

Influence of Glucose Concentrations on Biofilm Formation, Motility, Exoprotease Production, and Quorum Sensing in Aeromonas hydrophila

2013 ◽  
Vol 76 (2) ◽  
pp. 239-247 ◽  
Author(s):  
IQBAL KABIR JAHID ◽  
NA-YOUNG LEE ◽  
ANNA KIM ◽  
SANG-DO HA
Keyword(s):  
Quorum Sensing ◽  
Aeromonas Hydrophila ◽  
Biofilm Formation ◽  
Opportunistic Pathogen ◽  
Homoserine Lactone ◽  
Protease Production ◽  
Acyl Homoserine Lactone ◽  
Human Pathogen ◽  
Initial Biofilm ◽  
Motility Inhibition

Aeromonas hydrophila recently has received increased attention because it is opportunistic and a primary human pathogen. A. hydrophila biofilm formation and its control are a major concern for food safety because biofilms are related to virulence. Therefore, we investigated biofilm formation, motility inhibition, quorum sensing, and exoprotease production of this opportunistic pathogen in response to various glucose concentrations from 0.05 to 2.5% (wt/vol). More than 0.05% glucose significantly impaired (P &lt; 0.05) quorum sensing, biofilm formation, protease production, and swarming and swimming motility, whereas bacteria treated with 0.05% glucose had activity similar to that of the control (0% glucose). A stage shift biofilm assay revealed that the addition of glucose (2.5%) inhibited initial biofilm formation but not later stages. However, addition of quorum sensing molecules N-3-butanoyl-DL-homoserine lactone and N-3-hexanoyl homoserine lactone partially restored protease production, indicating that quorum sensing is controlled by glucose concentrations. Thus, glucose present in food or added as a preservative could regulate acyl-homoserine lactone quorum sensing molecules, which mediate biofilm formation and virulence in A. hydrophila.

8-hydroxyquinoline-5-(N-4-chlorophenyl) sulfonamide and fluconazole combination as a preventive strategy for Candida biofilm in haemodialysis devices

2021 ◽  
Vol 70 (7) ◽  
Author(s):  
Letícia Fernandes da Rocha ◽  
Bruna Pippi ◽  
Angélica Rocha Joaquim ◽  
Saulo Fernandes de Andrade ◽  
Alexandre Meneghello Fuentefria
Keyword(s):  
Biofilm Formation ◽  
Synergistic Effects ◽  
Local Treatment ◽  
The Other ◽  
Antibiofilm Activity ◽  
Preventive Strategy ◽  
Clinical Issue ◽  
Microdilution Method ◽  
Broth Microdilution Method ◽  
Time Kill

Introduction. The presence of Candida biofilms in medical devices is a concerning and important clinical issue for haemodialysis patients who require constant use of prosthetic fistulae and catheters. Hypothesis/Gap Statement. This prolonged use increases the risk of candidaemia due to biofilm formation. PH151 and clioquinol are 8-hydroxyquinoline derivatives that have been studied by our group and showed interesting anti-Candida activity. Aim. This study evaluated the biofilm formation capacity of Candida species on polytetrafluoroethylene (PTFE) and polyurethane (PUR) and investigated the synergistic effects between the compounds PH151 and clioquinol and fluconazole, amphotericin B and caspofungin against biofilm cells removed from those materials. Further, the synergistic combination was evaluated in terms of preventing biofilm formation on PTFE and PUR discs. Methodology. Susceptibility testing was performed for planktonic and biofilm cells using the broth microdilution method. The checkerboard method and the time–kill assay were used to evaluate the interactions between antifungal agents. Antibiofilm activity on PTFE and PUR materials was assessed to quantify the prevention of biofilm formation. Results. Candida albicans, Candida glabrata and Candida tropicalis showed ability to form biofilms on both materials. By contrast, Candida parapsilosis did not demonstrate this ability. Synergistic interaction was observed when PH151 was combined with fluconazole in 77.8 % of isolates and this treatment was shown to be concentration- and time-dependent. On the other hand, indifferent interactions were predominantly observed with the other combinations. A reduction in biofilm formation on PUR material of more than 50 % was observed when using PH151 combined with fluconazole. Conclusion. PH151 demonstrated potential as a local treatment for use in a combination therapy approach against Candida biofilm formation on haemodialysis devices.

Antimalarial activity of the bisquinoline trans-N1,N2-bis (7-chloroquinolin-4-yl)cyclohexane-1,2-diamine: comparison of two stereoisomers and detailed evaluation of the S,S enantiomer, Ro 47-7737.

1997 ◽  
Vol 41 (3) ◽  
pp. 677-686 ◽  
Author(s):  
R G Ridley ◽  
H Matile ◽  
C Jaquet ◽  
A Dorn ◽  
W Hofheinz ◽  
...  
Keyword(s):  
Antimalarial Activity ◽  
Ex Vivo ◽  
The Other ◽  
Parasite Resistance ◽  
Curative Effect ◽  
Specific Process ◽  
Terminal Half Life ◽  
Detailed Evaluation ◽  
Oral Doses

The S,S enantiomer of the bisquinoline trans-N1,N2-bis(7-chloroquinolin-4-yl)cyclohexane-1,2-diamine, Ro 47-7737, is significantly more potent against chloroquine-resistant Plasmodium falciparum than the R,R enantiomer and the previously described racemate. Both the enantiomers and the racemate are more potent inhibitors of heme polymerization than chloroquine, and their activities are probably mediated by inhibition of this parasite-specific process. The S,S enantiomer, Ro 47-7737, was studied in more detail and proved to be a potent antimalarial in the treatment of P. vivax ex vivo and P. berghei in vivo. Its suppression of P. berghei growth in a mouse model (50% effective dose, 2.3 mg/kg of body weight) was equal to that of chloroquine and mefloquine, and Ro 47-7737 was found to be more potent than these two drugs in the Rane test, in which the curative effect of a single dose is monitored. The dose at which 50% of animals were permanently cured (34 mg/kg) was markedly superior to those of chloroquine (285 mg/kg) and mefloquine (> 250 mg/kg). When administered orally at 50 mg/kg, Ro 47-7737 also showed a faster clearance of parasites than either chloroquine or mefloquine, and unlike the other two compounds, Ro 47-7737 showed no recrudescence. In a study to compare prophylactic efficacies of oral doses of 50 mg/kg, Ro 47-7737 provided protection for 14 days compared to 3 days for mefloquine and 1 day for chloroquine. The good curative and prophylactic properties of the compound can be explained in part by its long terminal half-life. The ability to generate parasite resistance to Ro 47-7737 was also assessed. With a rodent model, resistance could be generated over eight passages. This rate of resistance generation is comparable to that of mefloquine, which has proved to be an effective antimalarial for many years. Toxicity liabilities, however, ruled out this compound as a candidate for drug development.

Sign in / Sign up

Export Citation Format

Share Document