scholarly journals LANDSLIDE SUSCEPTIBILITY MAPPING BY GIS-BASED QUALITATIVE WEIGHTING PROCEDURE IN CORINTH AREA

2018 ◽  
Vol 36 (2) ◽  
pp. 904 ◽  
Author(s):  
M. Foumelis ◽  
E. Lekkas ◽  
I. Parcharidis
Keyword(s):  
Landslide Susceptibility ◽  
Rapid Assessment ◽  
Time Frame ◽  
Susceptibility Mapping ◽  
Slope Instability ◽  
Landslide Susceptibility Mapping ◽  
Susceptibility Map ◽  
Potential Index ◽  
Degree Of Stability ◽  
Data Layers

Landslide susceptibility mapping refers to a division of the land into zones of varying degree of stability based on an estimated significance of causative factors in inducing the instability. Maps of landslide susceptibility (relative hazard) are usually prepared on regional scales from 1:25.000 - 1:50.000. An advantage of regional studies is that they allow rapid assessment and hence larger areas can be covered in short durations. Factors (data layers) used for the preparation of the landslide susceptibility map were obtained from different sources such as topographic maps, geological maps and satellite images. All the above data layers were converted to raster format in the GIS, each representing an independent variable of a constructed spatial database. Computerization of the database would be necessary to make such analysis possible within an acceptable time frame. According to their relative importance to slope instability in the study area, the various classes of different data layers were assigned weights between 0,0 and 1,0 (collectively adding to 1,0). The overall susceptibility was calculated as an index named SPI (Susceptibility Potential Index), expressing the combination of the different weighted layers into a single map using a certain combination rule. Reclassification of susceptibility scores, based on natural breaks in the cumulative frequency histogram of SPI values, were used to delineate various susceptibility zones namely, very high, high, moderate, low and very low. Verification of results by overlaying susceptibility map and landslide inventory data and adjustment of zone's boundaries was the last stage of the study, allowing the reconsideration in some cases of the weights given

scholarly journals A Novel Hybrid Method for Landslide Susceptibility Mapping-Based GeoDetector and Machine Learning Cluster: A Case of Xiaojin County, China

2021 ◽  
Vol 10 (2) ◽  
pp. 93
Author(s):  
Wei Xie ◽  
Xiaoshuang Li ◽  
Wenbin Jian ◽  
Yang Yang ◽  
Hongwei Liu ◽  
...  
Keyword(s):  
Machine Learning ◽  
Hybrid Method ◽  
Roc Curve ◽  
Landslide Susceptibility ◽  
Susceptibility Mapping ◽  
Assessment Model ◽  
Landslide Susceptibility Mapping ◽  
Support Vector ◽  
Susceptibility Map ◽  
Area Index

Landslide susceptibility mapping (LSM) could be an effective way to prevent landslide hazards and mitigate losses. The choice of conditional factors is crucial to the results of LSM, and the selection of models also plays an important role. In this study, a hybrid method including GeoDetector and machine learning cluster was developed to provide a new perspective on how to address these two issues. We defined redundant factors by quantitatively analyzing the single impact and interactive impact of the factors, which was analyzed by GeoDetector, the effect of this step was examined using mean absolute error (MAE). The machine learning cluster contains four models (artificial neural network (ANN), Bayesian network (BN), logistic regression (LR), and support vector machines (SVM)) and automatically selects the best one for generating LSM. The receiver operating characteristic (ROC) curve, prediction accuracy, and the seed cell area index (SCAI) methods were used to evaluate these methods. The results show that the SVM model had the best performance in the machine learning cluster with the area under the ROC curve of 0.928 and with an accuracy of 83.86%. Therefore, SVM was chosen as the assessment model to map the landslide susceptibility of the study area. The landslide susceptibility map demonstrated fit with landslide inventory, indicated the hybrid method is effective in screening landslide influences and assessing landslide susceptibility.

scholarly journals Landslide susceptibility mapping by using a geographic information system (GIS) along the China–Pakistan Economic Corridor (Karakoram Highway), Pakistan

2019 ◽  
Vol 19 (5) ◽  
pp. 999-1022 ◽  
Author(s):  
Sajid Ali ◽  
Peter Biermanns ◽  
Rashid Haider ◽  
Klaus Reicherter
Keyword(s):  
Information System ◽  
Geographic Information System ◽  
Landslide Susceptibility ◽  
Slope Angle ◽  
Active Faults ◽  
Geographic Information ◽  
Susceptibility Mapping ◽  
Landslide Susceptibility Mapping ◽  
Susceptibility Map ◽  
Karakoram Highway

Abstract. The Karakoram Highway (KKH) is an important route, which connects northern Pakistan with Western China. Presence of steep slopes, active faults and seismic zones, sheared rock mass, and torrential rainfall make the study area a unique geohazards laboratory. Since its construction, landslides constitute an appreciable threat, having blocked the KKH several times. Therefore, landslide susceptibility mapping was carried out in this study to support highway authorities in maintaining smooth and hazard-free travelling. Geological and geomorphological data were collected and processed using a geographic information system (GIS) environment. Different conditioning and triggering factors for landslide occurrences were considered for preparation of the susceptibility map. These factors include lithology, seismicity, rainfall intensity, faults, elevation, slope angle, aspect, curvature, land cover and hydrology. According to spatial and statistical analyses, active faults, seismicity and slope angle mainly control the spatial distribution of landslides. Each controlling parameter was assigned a numerical weight by utilizing the analytic hierarchy process (AHP) method. Additionally, the weighted overlay method (WOL) was employed to determine landslide susceptibility indices. As a result, the landslide susceptibility map was produced. In the map, the KKH was subdivided into four different susceptibility zones. Some sections of the highway fall into high to very high susceptibility zones. According to results, active faults, slope gradient, seismicity and lithology have a strong influence on landslide events. Credibility of the map was validated by landslide density analysis (LDA) and receiver operator characteristics (ROC), yielding a predictive accuracy of 72 %, which is rated as satisfactory by previous researchers.

Application of Airborne LiDAR-Derived Parameters and Probabilistic-Based Frequency Ratio Model in Landslide Susceptibility Mapping

2012 ◽  
Vol 225 ◽  
pp. 442-447 ◽  
Author(s):  
Biswajeet Pradhan ◽  
Zulkiflee Abd. Latif ◽  
Siti Nur Afiqah Aman
Keyword(s):  
High Resolution ◽  
Landslide Susceptibility ◽  
Frequency Ratio ◽  
Susceptibility Mapping ◽  
Airborne Lidar ◽  
Landslide Susceptibility Mapping ◽  
Susceptibility Map ◽  
Ratio Model ◽  
Landslide Susceptibility Map ◽  
Frequency Ratio Model

The escalating number of occurrences of natural hazards such as landslides has raised a great interest among the geoscientists. Due to the extremely high number of point’s returns, airborne LiDAR permits the formation of more accurate DEM compared to other space borne and airborne remote sensing techniques. This study aims to assess the capability of LiDAR derived parameters in landslide susceptibility mapping. Due to frequent occurrence of landslides, Ulu Klang in Selangor state in Malaysia has been considered as application site. A high resolution of airborne LiDAR DEM was constructed to produce topographic attributes such as slope, curvature and aspect. These data were utilized to derive secondary deliverables of landslide parameters such as topographic wetness index (TWI), surface area ratio (SAR) and stream power index (SPI). A probabilistic based frequency ratio model was applied to establish the spatial relationship between the landslide locations and each landslide related factors. Subsequently, factor ratings were summed up to yield Landslide Susceptibility Index (LSI) and finally a landslide susceptibility map was prepared. To test the model performance, receiver operating characteristics (ROC) curve was carried out together with area under curve (AUC) analysis. The produced landslide susceptibility map demonstrated that high resolution airborne LiDAR data has huge potential in landslide susceptibility mapping.

scholarly journals GIS based Landslides Susceptibility Mapping using Probabilistic Certainty Factor for Hazard Zonation in Mandakini Valley

2020 ◽  
Vol 8 (6) ◽  
pp. 398-404
Keyword(s):  
High Risk ◽  
Landslide Susceptibility ◽  
Catchment Area ◽  
Susceptibility Mapping ◽  
Landslide Susceptibility Mapping ◽  
Susceptibility Map ◽  
Hazard Zonation ◽  
Certainty Factor ◽  
Landslide Susceptibility Map ◽  
Risk Zonation

Landslides are highly threatening a phenomenon which is very common in hilly region and mountainous regions. These landslides trigger major risks leading to heavy losses in terms of life and property. Many studies were conducted globally to determine Landslide vulnerability of different locations. In order to assess vulnerability, there were few studies around Landslides Susceptibility mapping also whose main objective is to identify high-risk vulnerable areas, there by applying measure to reduce the damage caused, if it were to happen in near future. In literature, there are many methods available for predictive susceptibility mapping of landslides. However, identification of any of the prevalent method for a specific area require utmost care and prudence because land sliding is a result of complex geo-environmental spatial factors. Mandakini valley is highly ruggedized terrain with intensive rains during monsoon season. As a result, Landslides are very common in the Mandakini River valley and its catchment area. These landslides cause severe damage to human settlements and infrastructure present in this area. In this study, we have used certainty factor method in order to generate landslide susceptibility map for the catchment area of Mandakini river. Certainty factor approach is a bi-variate probabilistic method which uses Geo-environmental parameters like elevation, slope, aspect, rainfall distance away from river, soil characteristics etc. to generate landslide susceptibility map. A Script was developed in ArcPy - a python package to design tools for generating susceptibility map. These tools can run both at desktop level and at server level and generate results in an integrated way. Esri ArcMap 10.7 is used in order to generate required data layers and thematic maps. Overall, this paper leverages GIS technology and its tools to performs Landslide Susceptibility Mapping using Probabilistic Certainty Factor and generate Hazard Zonation of Mandakini Valley using an automated script for generating Landslide Susceptibility Mapping and Hazard Risk Zonation. It was found that out of 696, total 136 villages are under high risk of landsides, total 329 villages are under moderate risks and around 231 villages are under low risk zonation impacting lives of approx. 216166 people. Also, it is worth mentioning that a GIS based script was developed to automate generation of Landslide Susceptibility Maps which can be used where the same geological and topographical feature prevails.

Use of GIS and Remote Sensing for Landslide Susceptibility Mapping

2019 ◽  
pp. 384-398 ◽  
Author(s):  
Arzu Erener ◽  
Gulcan Sarp ◽  
Sebnem H. Duzgun
Keyword(s):  
Remote Sensing ◽  
Information Systems ◽  
Spatial Data ◽  
Landslide Susceptibility ◽  
Geographical Information Systems ◽  
Vegetation Index ◽  
Susceptibility Mapping ◽  
Landslide Susceptibility Mapping ◽  
Gis And Remote Sensing ◽  
Data Layers

In recent years, geographical information systems (GISs) and remote sensing (RS) have proven to be common tools adopted for different studies in different scientific disciplines. GIS is defined as a set of tools for the input, storage, retrieval, manipulation, management, modeling, analysis, and output of spatial data. RS, on the other hand, can play a role in the production of a data and in the generation of thematic maps related to spatial studies. This study focuses on use of GIS and RS data for landslide susceptibility mapping. Five factors including normalized difference vegetation index (NDVI) and topographic wetness index (TWI), slope, lineament density, and distance to roads were used for the grid-based approach for landslide susceptibility mappings. Results of this study suggest that geographic information systems can effectively be used to obtain susceptibility maps by compiling and overlaying several data layers relevant to landslide hazards.

scholarly journals Landslide susceptibility mapping by using GIS along the China–Pakistan economic corridor (Karakoram Highway), Pakistan

2018 ◽  
Author(s):  
Sajid Ali ◽  
Peter Biermanns ◽  
Rashid Haider ◽  
Klaus Reicherter
Keyword(s):  
Landslide Susceptibility ◽  
Predictive Accuracy ◽  
Slope Angle ◽  
Active Faults ◽  
Susceptibility Mapping ◽  
Western China ◽  
Tectonic Activity ◽  
Landslide Susceptibility Mapping ◽  
Susceptibility Map ◽  
Karakoram Highway

Abstract. The Karakoram Highway (KKH), as part of the China-Pakistan Economic Corridor (CPEC), connects Northern Pakistan with Western China. KKH passes through the actively rising mountain ranges of Himalaya, Karakoram and Hindu Kush, forming the junction between the Indian and Eurasian plates, including Kohistan Island Arc. The area is characterized by fractured and weathered rockmass, diverse lithologies (igneous, metamorphic, and sedimentary), high seismicity, deep gorges, high relief, arid to Monsoon climate and locally high rates of tectonic activity. These conditions make the study area a unique geohazards laboratory. Starting with its construction in 1979, KKH's stability has been endangered by a variety of geohazards. In that regard, landslides constitute an appreciable threat, having blocked KKH for several times. Therefore, landslide susceptibility mapping was carried out in this study, to support highway authorities in maintaining smooth and hazard free travelling. Geological and geomorphological data were collected and processed using Arc GIS 10.3. Different conditioning and triggering factors for landslide occurrences were considered for preparation of the susceptibility map. These factors include lithology, seismicity, rainfall intensity, faults, elevation, slope angle, aspect, curvature, land cover and hydrology. According to spatial and statistical analyses, active faults, seismicity and slope angle mainly control the spatial distribution of landslides. Each controlling parameter was assigned a numerical weight by utilizing the Analytic Hierarchy Process (AHP) method. Additionally, the weighted overlay method (WOL) was employed to determine landslide susceptibility indices. As a final result, the landslide susceptibility map was produced. In the map, KKH was subdivided into four different susceptibility zones. Some sections of the highway fall into high to very high susceptibility zones. According to results, active faults, slope gradient, seismicity and lithology have a strong influence on landslide events. Credibility of the map was validated by landslide density analysis (LDA) and receiver operator characteristics (ROC), yielding a predictive accuracy of 72 % which is rated sufficient for mitigation planning.

scholarly journals Evaluating the impact of road construction on landslide susceptibility- A case study of Mandi district, Himachal Pradesh, India.

2021 ◽  
Author(s):  
Amol Sharma ◽  
Chander Prakash
Keyword(s):  
Statistical Models ◽  
Landslide Susceptibility ◽  
Road Construction ◽  
Himachal Pradesh ◽  
Susceptibility Mapping ◽  
Landslide Susceptibility Mapping ◽  
Susceptibility Map ◽  
Landslide Susceptibility Map ◽  
The Impact ◽  
Very High

Landslide susceptibility mapping has proved to be crucial tool for effective disaster management and planning strategies in mountainous regions. The present study is perused to investigate the changes in the landslide susceptibility of the Mandi district of Himachal Pradesh due to road construction. For this purpose, an inventory of 1723 landslides was generated from various sources. Out of these, 1199 (70%) landslides were taken in the training dataset to be used for modelling and prediction purposes, while 524 (30%) landslides were taken in the testing dataset to be used for validation purposes. Eleven landslide causative factors were selected from numerous hydrological, geological and topographical factors and were analyzed for landslide susceptibility mapping using three bivariate statistical models, namely; Frequency Ratio (FR), Certainty Factor (CF) and Shanon Entropy (SE). Two sets of LSM maps i.e. landslide susceptibility map natural (LSMN) and landslide susceptibility map road (LSMR), were generated using the above mentioned bivariate models and were divided into five landslide susceptibility classes namely; very low, low, medium, high and very high. These maps were analyzed for accuracy of prediction and validation using receiver operating characteristic (ROC) curves and area under curve (AUC) technique which indicated that all three bivariate statistical models performed satisfactorily with the SE model had the highest prediction and validation accuracy of 83-86%. Further analysis LSM maps confirmed that the percentage area in high and very high classes of land-slide susceptibility increased by 2.67-4.17% due to road construction activities in the study area.

scholarly journals Landslide susceptibility mapping using Forest by Penalizing Attributes (FPA) algorithm based machine learning approach

2020 ◽  
Vol 42 (3) ◽  
Author(s):  
Tran Van Phong ◽  
Hai-Bang Ly ◽  
Phan Trong Trinh ◽  
Indra Prakash
Keyword(s):  
Machine Learning ◽  
Landslide Susceptibility ◽  
Susceptibility Mapping ◽  
Landslide Susceptibility Mapping ◽  
Susceptibility Map ◽  
Conditioning Factors ◽  
Environmental Conditioning ◽  
Landslide Modeling ◽  
Machine Learning Approach ◽  
First Time

Landslide susceptibility mapping is a helpful tool for assessment and management of landslides of an area. In this study, we have applied first time Forest by Penalizing Attributes (FPA) algorithm-based Machine Learning (ML) approach for mapping of landslide susceptibility at Muong Lay district (Vietnam). For this aim, 217 historical landslides locations were identified and analyzed for the development of FPA model and generation of susceptibility map. Nine landslide topographical and geo-environmental conditioning factors (curvature, geology/lithology, aspect, distance from faults, rivers and roads, weathering crust, slope, and deep division) were utilized to construct the training and validating datasets for landslide modeling. Different quantitative statistical indices including Area Under the Receiver Operating Characteristic (ROC) curve (AUC) were used to evaluate the performance of the model. The results indicate that the predictive capability of the FPA is very good for landslide susceptibility mapping on both training (AUC = 0.935) and validating (AUC = 0.882) datasets. Thus, the novel FPA based ML model can be utilized for the development of accurate landslide susceptibility map of the study area and this approach can also be applied in other landslide prone areas.

scholarly journals Landslide susceptibility mapping using GIS along the Niš-North Macedonia highway

2021 ◽  
pp. 1-13
Author(s):  
Dajana Tešić
Keyword(s):  
Landslide Susceptibility ◽  
Susceptibility Mapping ◽  
Landslide Susceptibility Mapping ◽  
Susceptibility Map ◽  
Cultural Goods ◽  
Relative Significance ◽  
Industrial Facilities ◽  
The Subject ◽  
The Republic ◽  
Very High

Landslide events are a serious challenge worldwide, as well as in the Republic of Serbia. According to current estimates, 25-30% of the territory of Serbia is endangered by landslides. Due to intensive landslides, residential, infrastructural, energy, water management and industrial facilities, as well as natural and cultural goods are endangered. The subject of this paper is the use of GIS for the production of a landslide susceptibility map (LSM) in the area of the corridor of the highway E-75, section Niš - border of the Republic of Northern Macedonia. Emphasis is placed on the analysis of certain factors that influence the landslide events, as well as on the modifiers of the process itself. In this paper the following factors were selected for the assessment and susceptibility mapping: lithology, pedological factors, precipitation, aspect, slope, distance from watercourses, land use and distance from roads. The AHP method was then used to determine the relative significance and priority of predisposing factors. The layers were overlapped using ArcGISPro software. The results show that 17.2% of the surface is not susceptible (very low and low susceptibility), and 31.9% of the surface is prone to landslide events (high and very high susceptibility). The remaining 49.1% of the area belongs to the area of moderate susceptibility. Adding to this dense road network in the study area, as well as a large number of populated places, it can be concluded that the damage from the activation of the landslide would be significant. The results suggest that 60.7 km of the highway is in an area of high and greatest risk of landslides.

Use of GIS and Remote Sensing for Landslide Susceptibility Mapping

2018 ◽  
pp. 3503-3514 ◽  
Author(s):  
Arzu Erener ◽  
Gulcan Sarp ◽  
Sebnem H. Duzgun
Keyword(s):  
Remote Sensing ◽  
Information Systems ◽  
Spatial Data ◽  
Landslide Susceptibility ◽  
Geographical Information Systems ◽  
Vegetation Index ◽  
Susceptibility Mapping ◽  
Landslide Susceptibility Mapping ◽  
Gis And Remote Sensing ◽  
Data Layers

In recent years, geographical information systems (GISs) and Remote Sensing (RS) have proven to be common tools adopted for different studies in different scientific disciplines. GIS defined as a set of tools for the input, storage, retrieval, manipulation, management, modeling, analysis and output of spatial data. RS, on the other hand, can play a role in the production of a data and in the generation of thematic maps related to spatial studies. This study focuses on use of GIS and RS data for landslide susceptibility mapping. Five factors including Normalized Difference Vegetation Index (NDVI) and Topographic Wetness Index (TWI), slope; lineament density and distance to roads were used for the grid based approach for landslide susceptibility mappings. Results of this study suggest that geographic information systems can effectively be used to obtain susceptibility maps by compiling and overlaying several data layers relevant to landslide hazards.

Sign in / Sign up

Export Citation Format

Share Document