scholarly journals Political risk management practices of Multinational Corporations: their approaches to deal with developing countries under economic sanctions

2020 ◽  
Vol 5 (2) ◽  
pp. 215-247
Author(s):  
Yoel Modesto Gonzalez-Bravo

This article explores adjustments to the traditional political risk management practices followed by Multinational Corporations (MNCs) in their international operations to incorporate an increasingly concerning risk arising from the more frequent imposition of economic sanctions on developing countries over the last ten years for political purposes. In order to identify the main determinants of this risk and its consequences, a literature review is conducted, highlighting the models proposed by Tsebelis (1990) and Kakutami (2017) as the main frameworks to understand the dynamics for sanctions impositions, their frequency and the management of this risk by traditional MNCs from developed countries. Kakutami’s model is further enhanced in this article with a game theoretical model to understand the dynamic behavior of MNCs under this context, considering evidences of a growing presence in international markets of MNCs from developing countries, whose motivations for their expansion are explored. Finally, different political risk mitigating strategies are reviewed to explore their suitability to MNCs, with particular emphasis on the use of insurance to cover this risk and its effects on MNCs’ willingness to engage with sanctioned countries. As a general finding, from a reputational point of view, MNCs should take a more active role in their network analysis to identify their direct and indirect exposure to this risk, given the more frequent imposition of sanctions with an extraterritorial reach.

1994 ◽  
Vol 2 (3) ◽  
pp. 61-82 ◽  
Author(s):  
Uğur Yavaş ◽  
Doğan Eroğlu ◽  
Sevgin Eroğlu

Joint ventures predominate in business formats used by multinational corporations in developing countries. It is believed that joint ventures in these countries suffer more conflicts and performance problems than joint ventures in developed countries. However, there is little empirical research into understanding the nature of joint venture problems in less developed countries. Furthermore, what little research exists examines the issue from the perspective of the parent company at the expense of the local partner's point of view. The study reported here is intended to fill this void. Specifically, the study examines severity of various conflicts in Saudi-U.S. joint ventures operating in Saudi Arabia from the perspective of Saudi partners. Three critical sources of conflict are identified and analyzed in detail. The discussion concludes by recommending a dynamic approach to conflict management with a special emphasis on developing communication capabilities.


2020 ◽  
Author(s):  
Shuang Yu ◽  
Zhongwei Yan ◽  
Jiangjiang Xia ◽  
Alcide Zhao ◽  
Anzhi Zhang ◽  
...  

<p>Comparable estimates of the heat-related work productivity loss (WPL) in different countries over the world are difficult partly due to the lack of exact measures and comparable data for different counties. In this study, we analysed 4363 responses to a global online survey on the WPL during heat waves in 2016. The participants were from both developed and developing countries, facilitating estimates of the heat-related WPL across the world for the year. The heat-related WPL for each country involved was then deduced for increases of 1.5, 2, 3 and 4 °C in the global mean surface temperature under the representative concentration pathway scenarios in climate models. The average heat-related WPL in 2016 was 6.6 days for developing countries and 3.5 days for developed countries. The estimated heat-related WPL was negatively correlated with the gross domestic product per capita. When global surface temperatures increased by 1.5, 2, 3 and 4 °C, the corresponding WPL was 9 (19), 12 (31), 22 (61) and 33 (94) days for developed (developing) countries, quantifying how developing countries are more vulnerable to climate change from a particular point of view. Moreover, the heat-related WPL was unevenly distributed among developing countries. In a 2°C-warmer world, the heat-related WPL would be more than two months in Southeast Asia, the most influenced region. The results are considerable for developing strategy of adaptation especially for developing countries.</p>


2019 ◽  
Vol 12 (6) ◽  
pp. 188-202
Author(s):  
R. A. Epikhina

The article discusses some of the major characteristics and trends of China’s economic expansion in the global power industry. It argues that by investing in electricity infrastructure China creates prerequisites for long-term dominance in one of the key sectors in a number of countries and regions. Deals in the power sector are mainly implemented by state-owned companies and facilitated by state-owned financial institutions. In terms of structure and geography, foreign investment in the electricity sector is dominated by traditional types of generation in developing countries. However, China has been diversifying into renewables, nuclear power and grids and entering markets of the developed countries. The creation of a special international organization (GEIDCO) should facilitate its expansion in the electricity sector abroad. It is worth noting that foreign economic expansion plays an important role in supporting China’s slowing economy amid the transformation of its growth model. It allows China to adopt advanced technologies and best management practices in developed countries while forming alternative value chains, as well as promoting its own equipment and standards (especially in ultra-high voltage power transmission) in the developing countries. However, given the impact of the trade war, increasing securitization of the Chinese foreign investments, Chinese authorities’ control over capital outflows and the rising environmental concerns in developing countries, further expansion of the Chinese capital in the global electricity industry is likely to be held back, while competition from non-Chinese electricity companies is likely to grow.


Author(s):  
Victor Christianto ◽  
◽  
Florentin Smarandache ◽  

We argue that there are essentially two chief leadership models: the hard-style and soft-style leadership. From Neutrosophic point of view, there can be a third way, between hard-style leadership and soft-style leadership model, which may be more relevant to many of people in developing countries as well as in developed countries, who feel “powerless” and “hopeless” especially in this pandemic situation. We prefer to call this new approach: leading from powerlessness. The third-way Neutrosophic leadership model may also mean partially hard-style and partially soft-style leadership.


2020 ◽  
Vol Vol. 36 (No. 2) ◽  
pp. 71-77
Author(s):  
Katarina Haviernikova ◽  
Janka Betakova

Small and medium-sized enterprises (SMEs) in developed countries represent an important part of their economic environment. They belong to accelerators of economic development in regions and countries. One of the specifications of SMEs is that they allow people to learn to use their own entrepreneurial skills. Thus, the success of SMEs depends on the skills of the person who is responsible for business management in the enterprise. Without skilled and competent managers no activity will be performed effectively. The development and changes in the economic environment, in which SMEs operate, cause the various reversals connected with uncertainty and the resulting risks. A competent person (owner/manager) in SME will need to anticipate these risks and develop appropriate mitigation and strategies for them. The owner/manager of SME should consider the fact, that there could be deviations in the realization process against the planned goal. This deviation presents the risk and the representative of SME should know, how it is possible to manage this risk. It means to reduce its negative impact. The lack of knowledge is a fundamental problem in the failure of most initiatives in the SMEs and the lack of experience can become a major risk to business survival. The goal of owners/managers in SMEs should be to reduce the possible errors and risks in that way that the SME gets into a situation in which it can anticipate changes, and it is able to respond to them and exploit them to their advantage. Each SME is unique and the risk may occur differently in comparison with other SMEs. Risk management and mitigation of risk are important to ensure the security of the company and its continuous development. The risk management in SMEs is perceived as a means of the improvement of SMEs’ success in their activities, due to the fact, that in most cases the unpredictable situations represent a serious loss-making exposure for the SMEs business sector which leads to the loss. For those SMEs whose capital base is insufficient, they can have catastrophic consequences in the case of realized activities, and they can lead to financial losses and subsequently to possible bankruptcy. For this reason, risk management is a prerequisite for minimization of the negative effects of unexpected situations. Still, a lot of SMEs rarely carry out process-related activities risk management. It is affected by limited resources (financial, human), which SMEs have, and which process risk management. There is a wide range of studies focused on risk management in SMEs, but only several of them are focused currently on the responsibility for risk management. This paper contributes to the dissemination of knowledge about the responsibility for risk management in SMEs and provides wider analysis in ways of responsibility for it. To reach the main of the paper, questionnaire surveys among 1018 Slovak SMEs were conducted. We compared the responsibility for risk management in SMEs between two groups of SMEs – technological and tourism from the point of view of sized category, and regional of SMEs. For the evaluation of differences and dependencies among three groups of respondents’ answers, according to their size category, economic branch in which they operate, and regional location, the Chi-square test was used. The associations among respondents’ answers were evaluated through Cramer’s V. The results showed the differences in responsibility for risk management among Slovak SMEs. The results of this study may provide implications for subsequent research focused on responsibility for risk management in the wider context.


Risks ◽  
2019 ◽  
Vol 7 (1) ◽  
pp. 24 ◽  
Author(s):  
Ahsan Nawaz ◽  
Ahsan Waqar ◽  
Syyed Shah ◽  
Muhammad Sajid ◽  
Muhammad Khalid

Risk management is a comparatively new field and there is no core system of risk management in the construction industries of developing countries. In Pakistan, construction is an extremely risk-seeking industry lacking a good reputation for handling risk. However, it is gradually giving it more importance as a result of increased competition and construction activities. For this purpose, a survey-based study has been conducted which aims to investigate the risk management practices used in construction projects in Pakistan. To achieve the objective, data was collected from 22 contractor firms working on 100 diverse projects. The analysis indicates that risk management has been implemented at a low level in the local environment. The results also disclose that there is a higher degree of correlation between effective risk management and project success. The findings reveal the importance of risk management techniques, their usage, implication, and the effect of these techniques on the success of construction projects from the contractor’s perspective, thus convincing the key participants of projects about the use of risk management.


2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Md Thohidul Karim ◽  
Xu Qi

Purpose Multi-channel business operations are standard practice in most business contexts today. The popularity of multi-channel adoption among developing countries is growing fast. In Bangladesh, the retailers who adopted multi-channel retailing have been getting a very good response from the consumers. This study aims to understand the factors that influence manufacturers’ decisions to adopt multiple channels in Bangladesh. The authors applied an extended technology acceptance model with three variables: business innovation, business competition and consumer satisfaction. Design/methodology/approach Partial least squares-structural equation modeling was applied to test the data collected from 157 companies and relevant hypotheses. Findings The study findings show that Bangladeshi manufacturers are positive about, and expect benefits from, applying the new channel. The study also revealed that customer satisfaction considerably affects multi-channel adoption in Bangladesh. Similarly, business innovation and business competition play a significant role in introducing multiple business channels. Research limitations/implications This research was conducted in Bangladesh, and data are collected from Dhaka and Chittagong that may limit the generalizability of findings. Practical implications The research goal was to understand a manufacturer’s perception to adopt multi-channel in business. The proposed research model was able to address the major factors that drive a manufacturer to introduce multiple business channels, especially in Bangladesh. Originality/value Many research and case studies have been done the past couple of decades, but most of them are consumer oriented. Little research has been done to investigate a manufacturer’s point of view adapting innovation in business. Though some research articles are available online, most of them from developed countries. So, the study’s goal was to study developing countries scenario; thus, the authors choose Bangladesh.


2018 ◽  
Vol 45 (2) ◽  
pp. 348-382 ◽  
Author(s):  
Neha Saini ◽  
Monica Singhania

PurposeThe purpose of this paper is to investigate the potential determinants of FDI, in developed and developing countries.Design/methodology/approachThis paper investigates FDI determinants based on panel data analysis using static and dynamic modeling for 20 countries (11 developed and 9 developing), over the period 2004-2013. For static model estimations, Hausman (1978) test indicates the applicability of fixed effect/random effect, while generalized moments of methods (GMM) (dynamic model) is used to capture endogeneity and unobserved heterogeneity.FindingsThe outcome across different countries depicts diverse results. In developed countries, FDI seeks policy-related determinants (GDP growth, trade openness, and freedom index), and in developing country FDI showed positive association for economic determinants (gross fixed capital formulation (GFCF), trade openness, and efficiency variables).Research limitations/implicationsThe destination of FDI is limited to 20 countries in the present paper. The indicator of the institutional environment, namely economic freedom index, used in this paper has received some criticism in calculations.Practical implicationsThe paper enlists recommendations for future FDI policies and may assist government in providing a tactical framework for skill development, thereby increasing manufacturing growth rate. The paper also throws light on vertical and horizontal capital inflows considering resource, strategy, and market-seeking FDI.Social implicationsFDI may bring significant benefits by creating high-quality jobs, introducing modern production and management practices. It highlights how multinational corporations and government contribute to better working conditions in host countries.Originality/valueThe paper uncovers important features like macroeconomic variables, especially country-wise efficiency scores, policy variables, GFCF, and freedom index, for determining FDI inflows in 20 countries using panel data methods and provides a roadmap for developed and developing countries. The study highlights endogeneity and unobserved heteroscedasticity by applying GMM one- and two-step procedure.


2019 ◽  
Vol 15 (2) ◽  
pp. 119-124
Author(s):  
Léna Masson

Purpose The purpose of this paper is to pursue the dialogue on the global firms’ regulation vis-à-vis human rights and labor standards in developing countries. Design/methodology/approach Locke’s book The Promise and Limits of Private Power is analyzed and discussed with respect to more recent global regulation literature and mechanisms. Findings Locke advocates that private voluntary regulation has to be combined with local laws in developing countries to fully enforce labor standards and workers’ rights. In light of recent changes, the interesting model proposed by Locke shows some weaknesses. Originality/value To enforce labor standards and workers’ rights in developing countries, the author argue that governments in developed countries need to be seen as major players in multinational corporations (MNCs) regulations. But above all, the economic model needs to be questioned.


2014 ◽  
Vol 25 (2) ◽  
pp. 166-185 ◽  
Author(s):  
Safdar Shah Khan ◽  
Suleman Aziz Lodhi ◽  
Faiza Akhtar ◽  
Irshad Khokar

Purpose – The purpose of this paper is to analyze the recent global situation on waste of electric and electronic equipment (WEEE) management and recommend policy directions for designing environmental strategies. Design/methodology/approach – Qualitative research approach is adopted to review studies on WEEE management in developed and developing countries. The focus is to critically consider the available options for its safe management. Findings – Approximately 40-50 million tons of WEEE is generated worldwide annually and most of it is dumped in the developing countries. WEEE is not a challenge to be faced by a single country as it has trans-boundary effects and ultimately the contamination reaches back to the developed countries with a lapse of time. Research limitations/implications – Data availability on WEEE generation and disposal is in initial stages. Practical implications – Developing countries in Asia and Africa do not have resources to handle WEEE. The unregulated and unsafe WEEE management practices in these countries let hazardous materials to disseminate into the marine life and global ecosystem. Originality/value – The paper recommends policy directions to deal with the emerging issue that may have globally far reaching consequences.


Sign in / Sign up

Export Citation Format

Share Document