PRINCIPLES OF APPROACH TO DETERMINATION OF TECHNOLOGICAL ELEMENT BASE FOR AUTOMATION OF MACHINING PRODUCTION PREPARATION THROUGHOUT CYCLE

2021 ◽  
pp. 43-51
Author(s):  
E. N. Kolybenko
Keyword(s):  
Design Quality ◽  
Reference Information ◽  
Knowledge Objects ◽  
Problems Of Practice ◽  
Primary Basis ◽  
Elementary Basis ◽  
Production Preparation ◽  
Element Base

The use in the practice of design works of technological preparation of production (CCI) of parameters of design quality of the main elements of integration of the design (checkpoint) element base prevents transition of CCI to information technology of automation of a certain level of solution of problems of practice throughout its cycle. This is manifested, in particular, in the fact that during the change of technological operations of transformation along their route, as well as between the stages of CCI and checkpoint, information and logical links of knowledge are objectively interrupted. When determining a continuous, flexible algorithm in the technology of automation of solving problems of CCI practice, significant difficulties arise. Concepts of existing knowledge were often not up-to-date, which hampered automation – a fast communication system was needed. The primary basis of automation is the formalization of knowledge. Insufficient formalization of knowledge (the content is descriptive) leads to the use of inefficient dialogue technologies, the work of which is organized with reference information in the electronic form of its display. To overcome these difficulties, the structure of the CCI knowledge base in its hierarchy is proposed for seven levels of basic objects of various types, it is based on formalized approaches. Knowledge objects are focused on the consistent and continuous solution of CCI practice throughout its cycle. The structure of all knowledge objects is based on its own technological element base, which is organic for CCI. Only on such an elementary basis can the main target functions of CCI be realistically achieved in solving the problems of its practice on their possible set.

ANALYTICAL DETERMINATION OF THE MICRORELIEF PARAMETERS FORMED AS A RESULT OF CENTERLESS GRINDING OF THE FULL SPHERE

2021 ◽  
pp. 111-117
Author(s):  
О.П. Решетникова ◽  
Б.М. Изнаиров ◽  
А.Н. Васин ◽  
Н.В. Белоусова ◽  
Г.А. Семочкин
Keyword(s):  
Spherical Surface ◽  
Analytical Determination ◽  
Mean Deviation ◽  
Centerless Grinding ◽  
Abrasive Tools ◽  
The Cost ◽  
Production Preparation ◽  
Reliable Analytical Method

При технологической подготовке операций чистовой и отделочной обработки деталей абразивными инструментами очень важными задачами являются прогнозирование ее результатов в зависимости от назначенных режимов и назначение режимов в зависимости от требуемого качества обработанных поверхностей. Имеющиеся многочисленные справочные материалы такого характера получены в лабораторных условиях, носят дискретный характер, не учитывают специфическую топографию поверхностей абразивных инструментов и множества других условий и поэтому недостаточно достоверны. На их основе возможно планировать технологический процесс только предварительно, а затем неизбежно требуется уточнять его параметры экспериментальным путем, что приводит к значительному удорожанию процесса подготовки производства. Наличие достоверной аналитической методики позволяет кратно снизить эти затраты, и поэтому она настоятельно необходима не только и даже не столько при выполнении научных исследований, сколько в реальном производстве. В статье аналитически определены параметры микрорельефа, образующегося в результате бесцентрового шлифования полной сферы. Уточнено влияние процесса выхаживания на формирование шероховатости сферы. Приведена методика расчета среднеарифметического отклонения микропрофиля сферической поверхности In the technological preparation of the operations of finishing processing of parts with abrasive tools, it is very important to predict its results depending on the assigned modes and the purpose of modes depending on the required quality of the processed surfaces. The available numerous reference materials of this nature were obtained in laboratory conditions, are discrete in nature, do not take into account the specific topography of the surfaces of abrasive tools and many other conditions, and therefore are not reliable enough. On their basis, it is possible to plan the technological process only in advance, and then inevitably it is necessary to refine its parameters experimentally, which leads to a significant increase in the cost of the production preparation process. The availability of a reliable analytical method allows you to multiply these costs, and therefore it is urgently needed not only and even not so much when performing scientific research, but in real production. In the article, we analytically determine the parameters of the microrelief formed as a result of centerless grinding of a full sphere. We determined the influence of the nursing process on the formation of the sphere roughness. We present a method for calculating the arithmetic mean deviation of the micro-profile of a spherical surface

Tingkat Pemahaman Kompetensi Guru Pada Mahasiswa Pendidikan Geografi Sebagai Calon Guru Geografi

2020 ◽  
Vol 21 (1) ◽  
pp. 102-117
Author(s):  
Novia Zalmita ◽  
Muhajirah Muhajirah ◽  
Abdul Wahab Abdi
Keyword(s):  
Prospective Teachers ◽  
Prospective Teacher ◽  
Quantitative Description ◽  
Population Data ◽  
Geography Education ◽  
Teacher Competence ◽  
Education Department ◽  
Long Time

One that influences human resource indicators is education. The teacher is a profession as a job of academic specialization in a relatively long time in college. Understanding related to teacher competence is very important to have by a prospective teacher because it can affect the quality of performance as a professional teacher. The teacher's competence is known as pedagogic, professional, social and personality competencies. The issue in this study is how the competency of the teacher of the Department of Geography Education FKIP Unsyiah as a prospective teacher of geography? The purpose of this study was to determine the competence of teachers in the Department of Geography Education FKIP Unsyiah as prospective geography teachers. Quantitative description approach is used in this study to find answers to the issue. The population in this study were students of the Department of Geography Education FKIP Unsyiah class of 2015 and 2016 who had been declared to have passed the Micro Teaching and Magang Kependidikan 3 course totaling 50 people. Because the population is small and can be reached, the determination of the sample using total sampling techniques so that the sample in this study is the whole population. Data collection is done by distributing test questions to respondents. The data was analyzed using the descriptive statistics percentage formula. The results of the study indicate that the level of teacher competence of Geography Education Department students as prospective teachers is in the moderate category, namely as many as 22 respondents (44%). A total of 12 respondents (24%) were in the high category, 15 respondents (30%) were in the low category and 1 respondent (2%) were in the very low category.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

Fluctuations of Annual Precipitation and Water Resources Quality in Ukraine

2016 ◽  
Vol 10 (4s) ◽  
pp. 621-629
Author(s):  
Valentina Pidlisnyuk ◽  
◽  
John Harrington JR ◽  
Yulia Melnyk ◽  
Yuliya Vystavna ◽  
...  
Keyword(s):  
Water Resources ◽  
Surface Waters ◽  
Precipitation Amount ◽  
Ion Concentration ◽  
Annual Precipitation ◽  
Resource Quality ◽  
Phosphate Ion ◽  
Regional Trends

The article focuses on examining the influence of fluctuations in annual precipitation amount on the quality of surface waters. Water quality was estimated with data on BOD, COD and phosphate–ion concentration within five selected regions of Ukraine. Analysis of the precipitation data (1991 – 2010) showed different regional trends. Using the statistics, determination of the interconnection between precipitation amount and water resources quality were done. The obtained regularities and associated uncertainties can be used for prediction of changes in water resource quality and as a guide for future adaptation to possible climate change.

POTENSI PENGEMBANGAN SADE SEBAGAI DESA WISATA LOMBOK

2016 ◽  
Vol 20 (2) ◽  
pp. 69-82
Author(s):  
W. Suprihatin ◽  
H. Hailuddin
Keyword(s):  
Analytical Hierarchy Process ◽  
Environmental Aspect ◽  
Priority Level ◽  
Highest Weight ◽  
Local Tradition ◽  
Tourist Village ◽  
Hierarchy Process ◽  
Initial Pattern

The background of the problems in this study is the decreasing quality of Sade hamlet amid rising tourist arrivals. From the environmental aspect, the conditions of the hamlet began to decline, in which the initial pattern of Sade has started a lot of changes towards the deficient and began to leave the local tradition. One effort to improve the condition of Sade hamlet in social, cultural and the environmental aspect is through the formulation of a sustainable structuring, the presence and identity maintaining and making a sustainable Tourism Village. Through analysis of AHP (Analytical Hierarchy Process) by collecting the perceptions of some experts through interviews and questionnaires, obtained by weighting the priority of the experts, namely the preservation of culture as an element of priority-level goals to be achieved in the development of Sade Hamlet as a tourist village at 0,476. While the determination of the level of the main criteria in the achievement of these objectives is the highest weight while maintaining a typical village environment at 0.319. Priority strategies that get the highest weight of the experts is that Sade Hamlet Revitalization with a priority weighting of 0.583. The second priority is the relocation of Hamlet at 0.235. Lowest weighting or last priority is Replication Sade Hamlet at 0.182.

Automation of selected brazes' dynamic properties in high-temperatures' measurement process

2013 ◽  
Vol 18 (2-3) ◽  
pp. 33-41
Author(s):  
Dominik Sankowski ◽  
Marcin Bakala ◽  
Rafał Wojciechowski
Keyword(s):  
Surface Tension ◽  
High Temperatures ◽  
Dynamic Properties ◽  
Automatic Measurement ◽  
Measurement Methodology ◽  
Joining Process ◽  
Wetting Force ◽  
Research Grant

Abstract The good quality of several manufactured components frequently depends on solidliquid interactions existing during processing. Nowadays, the research in material engineering focuses also on modern, automatic measurement methods of joining process properties, i.a. wetting force and surface tension, which allows for quantitative determination of above mentioned parameters. In the paper, the brazes’ dynamic properties in high-temperatures’ measurement methodology and the stand for automatic determination of braze’s properties, constructed and implmented within the research grant nr KBN N N519 441 839 - An integrated platform for automatic measurement of wettability and surface tension of solders at high temperatures, are widely described

X-ray fluorescence determination of zinc sulfate in acidic zinc plating electrolyte

2020 ◽  
Vol 86 (10) ◽  
pp. 18-22
Author(s):  
K. N. Vdovin ◽  
K. G. Pivovarova ◽  
N. A. Feoktistov ◽  
T. B. Ponamareva
Keyword(s):  
Zinc Sulfate ◽  
Zinc Coating ◽  
Electrolyte Composition ◽  
Complexometric Titration ◽  
X Ray ◽  
Fluorescence Determination ◽  
Zinc Plating ◽  
Zinc Determination

Zinc sulfate is the main component in the composition of the acidic zinc plating electrolyte. Deviation in the electrolyte composition from the optimum content leads to destabilization of the electrolysis process and deteriorate the quality of the resulting zinc coating. The proper quality of a zinc coating obtained by galvanic deposition can be ensured only with timely monitoring and adjustment of the electrolyte composition. A technique of X-ray fluorescence determination of zinc (in terms of zinc sulfate) in an acidic zinc plating electrolyte is proposed. The study was carried out using an ARL Quant’X energy dispersive spectrometer (Thermo Fisher Scientific, USA) with a semiconductor silicon-lithium detector. The features of the spectrometer design are presented. The optimal parameters of excitation and detection of zinc radiation were specified when the electrolyte sample was diluted 1:1000. The ZnKα1 line was used as an analytical line. The plotted calibration graph is linear, the correlation coefficient being 0.999234. The results of zinc determination according to the developed method were compared with the data of the reference method of complexometric titration to prove the reliability of the procedure. The results are characterized by good convergence and accuracy. The proposed method of X-ray fluorescence zinc determination in a zinc plating electrolyte equals complexometric titration in the limiting capabilities and even exceeds the latter in terms of the simplicity of sample preparation and rapidity. The developed method of X-ray fluorescence determination of zinc is implemented in analysis of the electrolyte used in the continuous galvanizing unit at «METSERVIS LLC».

INFLUENCE OF DICARBOXYLIC ACIDS ON SOWING QUALITY OF SPRING BARLEY

1970 ◽  
pp. 22-25
Author(s):  
N. N. Loy ◽  
S. N. Gulina
Keyword(s):  
Organic Acids ◽  
Spring Barley ◽  
Dose Range ◽  
Dicarboxylic Acids ◽  
Rotary Machine ◽  
Working Solution ◽  
Negative Effect ◽  
Sprouted Seeds

The effect of presowing seed treatment on various concentrations of dicarboxylic (organic) acids on the sowing characteristics of spring barley has been studied. Seeds were treated with organic acids obtained by exposing cuttings to the radiation with a dose of 100 kGy and consequent hydrolysis, in concentrations: 1•10-7 %; 1•10-9; 1•10-11; 1•10-13 and 1•10-15 % on a laboratory rotary machine RVO-64 for one day before laying for germination. Distilled water was used for the control case. The rate of application of the working solution calculated as 10 liters / ton of seeds. Seeds were germinated in filter paper rolls in accordance with GOST 12038-84 requirements. The temperature was maintained at +24 ° C in the thermostat where the glasses with rolls were placed. For determination of germinative power and laboratory germination the sprouted seeds were evaluated after three and seven days, respectively. In laboratory experiments it was established that the treatment of barley seeds of varieties Zazersky 85, Nur and Vladimir with organic acids (OK) in different concentrations had both a stimulating and a negative effect. On the Zazersky 85 variety, in variants with acid concentrations of 1•10-9 and 1•10-11, an increase in germination energy (EP) by 2-4% and a significant decrease (by 3-4%) of laboratory germination (LV) of barley seeds were noted. On the Nur variety, the increase in EP was observed at 4% (concentration 1•10-11), LV and seed growth force (CPC) by 2-7% at a concentration of 1•10-7 and in the dose range 1•10-11 - 1•10-14 compared to the control values. On the grade of Vladimir, an increase in EP, LV, and CPC was found to increase by 1-6% at concentrations OK 1•10-7 and 1•10-13. It was shown that the treatment of seeds with acids led to an increase in the length of the germ in all studied varieties (by 3-9%) and dry biomass of 7-day-old seedlings - by 3-6%. Consequently, the treatment of seeds with a mixture of dicarboxylic acids has a stimulating effect on the sowing quality of spring barley.

Sign in / Sign up

Export Citation Format

Share Document