Hydrodynamics and Warmth Trade in Cycles of Cooling of an Attractive Plate in an Attractive Fluid in the Attractive Field

2021 ◽  
Vol 19 (11) ◽  
pp. 32-39
Author(s):  
S.A.A. Alsaati ◽  
Qasim Shakir Kadhim ◽  
Maher Hassan Rashid ◽  
Tuqa Mohammed Jawad Abd UlKadhim
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Heat Exchange ◽  
Cooling Rate ◽  
Steel Plate ◽  
Lower Intensity ◽  
Transfer Processes ◽  
Magnetic Forces ◽  
Air Cavities ◽  
The Magnetic Field

The effect of the magnetic field on heat transfer processes of a magnetized steel plate cooled in a magnetic fluid is experimentally studied. Thermocouples were installed at six points on the surface of the plate along its length. The plots of temperature versus time are obtained in the absence of a magnetic field and in magnetic fields of different intensity. It is found that the intensity of heat exchange depends to a large extent on the magnitude of the magnetic field and on the location of points on the surface of the plate. In a magnetic field, cooling of the central part of the plate occurs with the same intensity as in the absence of a magnetic field and with a lower intensity in comparison with other points on the surface of the plate. Near the plate ends, the cooling rate of the surface is much greater in the magnetic field than in the absence of it. With increasing magnetic field strength, the cooling rate of points in the central part of the plate decreases and is less than in the absence of a magnetic field. The dependence of heat transfer on the magnitude of the magnetic field is explained by the distribution of the magnetic forces acting on the liquid surrounding the plate and the nature of the vapor-air cavities formed near its surface. Experiments on simulation of formation and the shape of vapor-air cavities in a liquid surrounding a magnetizing plate are described.

The magnetic field effect on heat-exchange characteristics and MHD resistance of lead-bismuth eutectic flow in the TOKAMAK blanket heat-sink systems

2013 ◽  
Vol 49 (1-2) ◽  
pp. 237-248
Author(s):  
A. V. Beznosov ◽  
O. O. Novozhilova ◽  
S. Yu. Savinov ◽  
M. V. Yarmonov ◽  
R. E. Alekseev
Keyword(s):  
Magnetic Field ◽  
Heat Exchange ◽  
Heat Sink ◽  
Field Effect ◽  
Magnetic Field Effect ◽  
Lead Bismuth Eutectic ◽  
The Magnetic Field

scholarly journals Effect of Magnetic Field on the Forced Convective Heat Transfer of Water–Ethylene Glycol-Based Fe3O4 and Fe3O4–MWCNT Nanofluids

2021 ◽  
Vol 11 (10) ◽  
pp. 4683
Author(s):  
Areum Lee ◽  
Chinnasamy Veerakumar ◽  
Honghyun Cho
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Field Strength ◽  
Ethylene Glycol ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Hybrid Nanofluid ◽  
Forced Convective Heat Transfer ◽  
The Magnetic Field

This paper discusses the forced convective heat transfer characteristics of water–ethylene glycol (EG)-based Fe3O4 nanofluid and Fe3O4–MWCNT hybrid nanofluid under the effect of a magnetic field. The results indicated that the convective heat transfer coefficient of magnetic nanofluids increased with an increase in the strength of the magnetic field. When the magnetic field strength was varied from 0 to 750 G, the maximum convective heat transfer coefficients were observed for the 0.2 wt% Fe3O4 and 0.1 wt% Fe3O4–MWNCT nanofluids, and the improvements were approximately 2.78% and 3.23%, respectively. The average pressure drops for 0.2 wt% Fe3O4 and 0.2 wt% Fe3O4–MWNCT nanofluids increased by about 4.73% and 5.23%, respectively. Owing to the extensive aggregation of nanoparticles by the external magnetic field, the heat transfer coefficient of the 0.1 wt% Fe3O4–MWNCT hybrid nanofluid was 5% higher than that of the 0.2 wt% Fe3O4 nanofluid. Therefore, the convective heat transfer can be enhanced by the dispersion stability of the nanoparticles and optimization of the magnetic field strength.

Effects of uniform or non-uniform heating at bottom wall on MHD mixed convection in a porous cavity saturated by nanofluid

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Subramanian Muthukumar ◽  
Selvaraj Sureshkumar ◽  
Arthanari Malleswaran ◽  
Murugan Muthtamilselvan ◽  
Eswari Prem
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Transfer Rate ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Darcy Number ◽  
Bottom Wall ◽  
Uniform Heating ◽  
The Magnetic Field

Abstract A numerical investigation on the effects of uniform and non-uniform heating of bottom wall on mixed convective heat transfer in a square porous chamber filled with nanofluid in the appearance of magnetic field is carried out. Uniform or sinusoidal heat source is fixed at the bottom wall. The top wall moves in either positive or negative direction with a constant cold temperature. The vertical sidewalls are thermally insulated. The finite volume approach based on SIMPLE algorithm is followed for solving the governing equations. The different parameters connected with this study are Richardson number (0.01 ≤ Ri ≤ 100), Darcy number (10−4 ≤ Da ≤ 10−1), Hartmann number (0 ≤ Ha ≤ 70), and the solid volume fraction (0.00 ≤ χ ≤ 0.06). The results are presented graphically in the form of isotherms, streamlines, mid-plane velocities, and Nusselt numbers for the various combinations of the considered parameters. It is observed that the overall heat transfer rate is low at Ri = 100 in the positive direction of lid movement, whereas it is low at Ri = 1 in the negative direction. The average Nusselt number is lowered on growing Hartmann number for all considered moving directions of top wall with non-uniform heating. The low permeability, Da = 10−4 keeps the flow pattern same dominating the magnetic field, whereas magnetic field strongly affects the flow pattern dominating the high Darcy number Da = 10−1. The heat transfer rate increases on enhancing the solid volume fraction regardless of the magnetic field.

scholarly journals Heat Transfer to MHD Oscillatory Viscoelastic Flow in a Channel Filled with Porous Medium

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Rita Choudhury ◽  
Utpal Jyoti Das
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Porous Medium ◽  
Radiative Heat ◽  
Saturated Porous Medium ◽  
Transverse Magnetic ◽  
Viscoelastic Flow ◽  
Viscoelastic Parameter ◽  
Flow Parameters ◽  
The Magnetic Field

The combined effect of a transverse magnetic field and radiative heat transfer on unsteady flow of a conducting optically thin viscoelastic fluid through a channel filled with saturated porous medium and nonuniform walls temperature has been discussed. It is assumed that the fluid has small electrical conductivity and the electromagnetic force produced is very small. Closed-form analytical solutions are constructed for the problem. The effects of the radiation and the magnetic field parameters on velocity profile and shear stress for different values of the viscoelastic parameter with the combination of the other flow parameters are illustrated graphically, and physical aspects of the problem are discussed.

scholarly journals Research on convective heat transfer characteristics of Fe3O4magnetic nanofluids under vertical magnetic field

2021 ◽  
pp. 151-151
Author(s):  
Ruihao Zhang ◽  
Sixian Wang ◽  
Shan Qing ◽  
Zhumei Luo ◽  
Zhang Xiaohui
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Reynolds Number ◽  
Field Strength ◽  
Convective Heat Transfer ◽  
Magnetic Field Strength ◽  
Convective Heat ◽  
Heat Transfer Characteristics ◽  
Magnetic Nanofluids ◽  
The Magnetic Field

This paper focuses on the convective heat transfer characteristics of Fe3O4 /Water magnetic nanofluids under laminar and turbulent conditions. After verifying the accuracy of the experimental apparatus, the effects of magnetic field strength, concentration, Reynolds number and temperature on the convective heat transfer coefficient have been studied. The convective heat transfer characteristics of nanofluids under laminar and turbulent flow conditions were studied in depth, and the influence of each factor on the heat transfer coefficient was analyzed by orthogonal experimental design method. Under the laminar flow conditions, the convective heat transfer of magnetic nanofluids performed best when the Reynolds number was 2000, the magnetic field strength was 600, the temperature was 30? and the concentration was 2%. And the convective heat transfer coefficient (h) increased by 3.96% than the distilled water in the same conditions. In turbulent state, the convective heat transfer of magnetic nanofluids performed the best when the Re was 6000, the magnetic field strength was 600, the temperature was 40? and the concentration was 2%. The h increased by 11.31% than the distilled water in the same Reynolds number and the magnetic field strength conditions.

scholarly journals Теплообмен при смешанной конвекции расплава соли в присутствии магнитных полей

2019 ◽  
Vol 45 (10) ◽  
pp. 27
Author(s):  
И.А. Беляев ◽  
Д.А. Бирюков ◽  
А.В. Котляр ◽  
Е.А. Белавина ◽  
П.А. Сардов ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Temperature Fluctuations ◽  
Reynolds Numbers ◽  
Transverse Magnetic ◽  
Statistical Characteristics ◽  
Transfer Coefficients ◽  
Gravitational Flow ◽  
Heat Transfer Coefficients ◽  
The Magnetic Field

The results of an experimental study of the salt melt downflow in a uniformly heated pipe under the influence of a strong transverse magnetic field are presented. The changes of heat transfer coefficients and statistical characteristics of temperature fluctuations under the influence of the magnetic field are investigated. The peculiarities of the transition of the viscous-gravitational flow in the viscous-inertial-gravitational flow at Reynolds numbers (Re=3000-5000) under the influence of the magnetic field (Ha=17) were studied.

Magnetohydrodynamic effects on flow structures and heat transfer over two cylinders wrapped with a porous layer in side

2016 ◽  
Vol 26 (5) ◽  
pp. 1416-1432 ◽  
Author(s):  
Saman Rashidi ◽  
Javad Abolfazli Esfahani ◽  
Mohammad Sadegh Valipour ◽  
Masoud Bovand ◽  
Ioan Pop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Flow Field ◽  
Porous Layer ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Circular Cylinders ◽  
Flow Structures ◽  
Content Type ◽  
The Magnetic Field

Purpose – The analysis of the flow field and heat transfer around a tube row or tube banks wrapped with porous layer have many related engineering applications. Examples include the reactor safety analysis, combustion, compact heat exchangers, solar power collectors, high-performance insulation for buildings and many another applications. The purpose of this paper is to perform a numerical study on flows passing through two circular cylinders in side-by-side arrangement wrapped with a porous layer under the influence of a magnetic field. The authors focus the attention to the effects of magnetic field, Darcy number and pitch ratio on the mechanism of convection heat transfer and flow structures. Design/methodology/approach – The Darcy-Brinkman-Forchheimer model for simulating the flow in porous medium along with the Maxwell equations for providing the coupling between the flow field and the magnetic field have been used. Equations with the relevant boundary conditions are numerically solved using a finite volume approach. In this study, Stuart and Darcy numbers are varied within the range of 0 < N < 3 and 1e-6 < Da < 1e-2, respectively, and Reynolds and Prandtl numbers are equal to Re=100 and Pr=0.71, respectively. Findings – The results show that the drag coefficient decreases for N < 0.6 and increases for N > 0.6. Also, the effect of magnetic field is negligible in the gap between two cylinders because the magnetic field for two cylinders counteracts each other in these regions. Originality/value – To the authors knowledge, in the open literature, flow passing over two circular cylinders in side-by-side arrangement wrapped with a porous layer has been rarely investigated especially under the influence of a magnetic field.

Effect of a Magnetic Field on the Heat Transfer Rate on Free Convection in a Rectangular Cavity

2005 ◽  
Author(s):  
Gustavo Gutierrez ◽  
Ezequiel Medici
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Stokes Equations ◽  
Rectangular Cavity ◽  
Convection Flow ◽  
Interesting Phenomenon ◽  
The Magnetic Field

The interaction between magnetic fields and convection is an interesting phenomenon because of its many important engineering applications. Due to natural convection motion the electric conductive fluid in a magnetic field experiences a Lorenz force and its effect is usually to reduce the flow velocities. A magnetic field can be used to control the flow field and increase or reduce the heat transfer rate. In this paper, the effect of a magnetic field in a natural convection flow of an electrically conducting fluid in a rectangular cavity is studied numerically. The two side walls of the cavity are maintained at two different constant temperatures while the upper wall and the lower wall are completely insulated. The coupling of the Navier-Stokes equations with the Maxwell equations is discussed with the assumptions and main simplifications assumed in typical problems of magnetohydrodynamics. The nonlinear Lorenz force generates a rich variety of flow patterns depending on the values of the Grashof and Hartmann numbers. Numerical simulations are carried out for different Grashof and Hartmann numbers. The effect of the magnetic field on the Nusselt number is discussed as well as how convection can be suppressed for certain values of the Hartmann number under appropriate direction of the magnetic field.

Boiling heat transfer characteristics of binary magnetic fluid flow in a vertical circular pipe with a partly heated region

2004 ◽  
Vol 218 (2) ◽  
pp. 223-232 ◽  
Author(s):  
S Shuchi ◽  
K Sakatani ◽  
H Yamaguchi
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Boiling Heat Transfer ◽  
Transfer Rate ◽  
Heated Region ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
The Magnetic Field

An investigation was conducted for heat transfer characteristics of binary magnetic fluid flow in a partly heated circular pipe experimentally. The boiling heat transfer characteristics on the effects of the relative position of the magnetic field to the heated region were particularly considered in the present study. From the experimental verification, the Nusselt number, representing boiling heat transfer characteristics, was obtained for various flow and magnetic conditions which were represented by the non-dimensional parameters of the Reynolds number and the magnetic pressure number. Additionally, the rate of change of the Nusselt number found by applying the magnetic field was also estimated and the optimal position of the field to the partly heated region was discussed. The results indicated that the effect of the magnetic field to the heat transfer rate from the heated wall was mainly subjected to the effect of the vortices induced in the magnetic field region and the possibility of controlling the heat transfer rate by applying an outer magnetic field to utilize the effect.

scholarly journals 3D Magneto-Buoyancy-Thermocapillary Convection of CNT-Water Nanofluid in the Presence of a Magnetic Field

Processes ◽  
2020 ◽  
Vol 8 (3) ◽  
pp. 258 ◽  
Author(s):  
Lioua Kolsi ◽  
Salem Algarni ◽  
Hussein A. Mohammed ◽  
Walid Hassen ◽  
Emtinene Lajnef ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Flow Structure ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Numerical Study ◽  
Flow Stabilization ◽  
Magnetic Field Magnitude ◽  
The Magnetic Field

A numerical study is performed to investigate the effects of adding Carbon Nano Tube (CNT) and applying a magnetic field in two directions (vertical and horizontal) on the 3D-thermo-capillary natural convection. The cavity is differentially heated with a free upper surface. Governing equations are solved using the finite volume method. Results are presented in term of flow structure, temperature field and rate of heat transfer. In fact, results revealed that the flow structure and heat transfer rate are considerably affected by the magnitude and the direction of the magnetic field, the presence of thermocapillary forces and by increasing nanoparticles volume fraction. In opposition, the increase of the magnetic field magnitude leads to the control the flow causing flow stabilization by merging vortexes and reducing heat transfer rate.

Sign in / Sign up

Export Citation Format

Share Document