scholarly journals Effect of Peanut Shell Torrefaction on Qualities of The Produced Bio-pellet

REAKTOR ◽  
2019 ◽  
Vol 18 (04) ◽  
pp. 183 ◽  
Author(s):  
Santiyo Wibowo ◽  
Ningseh Lestari
Keyword(s):  
Moisture Content ◽  
Raw Materials ◽  
Calorific Value ◽  
Ash Content ◽  
Peanut Shell ◽  
Fixed Carbon ◽  
Heating Value ◽  
Fuel Consumption Rate ◽  
Peanut Shells ◽  
Previously Treated

Peanut shells could be regarded as biomass wastes generated from agricultural products, which are abundantly available.  The current handling of those wastes is merely through direct incineration, without a proper and controlled manner. Consequently, it could arouse environmental concerns, such as air pollution and human respiratory diseases.  One alternative solution is converting those peanut shells to bio-pellet, expectedly applicable for fuels.  Relevantly, research on bio-pellet manufacture from peanut shells, previously treated with the torrefaction, was conducted. It’s aimed mainly to identify the fuel-related characteristics of bio-pellet products.  The tested bio-pellet parameters covered, moisture content, ash content, volatile matters, fixed carbon content, calorific values, and density.  The results revealed that torrefaction temperature and time at raw materials (peanut shells) could improve their qualities in regard to particular calorific value compared to those before such torrefaction; which referred to Indonesia’s Standard (SNI-8021-2014) for wood bio-pellet.  Further, torrefaction could increase bio-pellet quality which satisfied the SNI’s Standard, except for ash content.  Optimal torrefaction treatment was obtained at 300oC temperature for 60 minutes, whereby it achieved remarkable bio-pellet characteristics in terms of moisture content (3.092%), ash content (6.116%), volatile matters (38.387%), fixed carbon (55.447%), calorific value (6174 cal/g), and density (0.703 g/cm3). The torrefaction bio-pellets from peanut shells could achieve remarkable performances, with respect to fuel consumption rate (0.68 kg/hr), heating value (6174 kcal/kg), and thermal efficiency (16.67%).

scholarly journals Utilization of Pine Fruit and Peanut Shell Wastes into Briquettes as an Alternative Fuel

2021 ◽  
Vol 328 ◽  
pp. 09002
Author(s):  
Mohamad Mirwa ◽  
Muhammad Abdus Salam Jawwad
Keyword(s):  
Compressive Strength ◽  
Moisture Content ◽  
Alternative Energy ◽  
Calorific Value ◽  
Mesh Size ◽  
Hydraulic Press ◽  
Ash Content ◽  
Energy Sources ◽  
Peanut Shell ◽  
Peanut Shells

Fuel or energy sources scarcity is currently a problem in Indonesia. Pine waste and peanut shells are wastes that have potential to be processed into alternative energy as briquettes, using molasses as adhesive. Briquette was made by destroying the material into small pieces that have been carbonized and sieved with a variation of 20 and 30 mesh size, added with molasses, and then molded with a hydraulic press. Briquettes are dried using an oven at 105 °C for 10 hours to remove moisture content. The pine to peanut shell ratio used are of 0:1, 1:0, 1:1, 1:2, 1:3, 2:1, 2:3, 3:1 and 3:2. The analysis includes analysis of calorific value, moisture content, ash content and compressive strength. The result shows the pine waste to peanut shells ratio of 1:0 has the highest calorific value for 20 mesh is 4674.50 Cal/g and for 30 mesh is 4585.10 Cal/g. The lowest water content for 20 mesh is 1.76% and for 30 mesh is 1.85%. The lowest ash content for 20 mesh is 0.58% and for 30 mesh is 0.59%. And the highest compressive strength for 20 mesh is 35.20 kg/cm2 and for 30 mesh is 28.90 kg/cm2.

scholarly journals Pengaruh Temperatur, Komposisi Bahan Cangkang Inti Kelapa Sawit dan Konsentrasi Perekat pada Karakteristik Briket Komersial dari Tempurung Kelapa Sawit

2020 ◽  
Vol 4 (2) ◽  
pp. 126
Author(s):  
Guna Bangun Persada ◽  
Putty Yunesti
Keyword(s):  
Moisture Content ◽  
Raw Materials ◽  
Palm Kernel ◽  
Calorific Value ◽  
Good Alternative ◽  
Ash Content ◽  
Fixed Carbon ◽  
Palm Kernel Shell ◽  
Processing Plants ◽  
Cylindrical Mold

Briquettes are an essential product for metal mineral processing plants in Indonesia. One good alternative raw materials for briquettes that do not pollute the environment is the palm kernel shell. This research was conducted by making briquettes from palm kernel shells to find optimal variations in carbonization temperature, material mixture, and adhesive mixture. The research was conducted on a laboratory scale. The palm kernel shell and coal kernel were carbonized at various temperatures, namely 450°C, 550°C, and 650°C, then crushed and sieved to 35 mesh. The powdered palm kernel shell and coal that have become powdered charcoal are weighted based on a mixture of powder and the adhesive composition ratio of 40 g. After that, the briquettes were formed under a pressure of 100 kg/cm² on a cylindrical mold with 40 mm. The analyzes carried out were moisture content, ash content, volatile substances content, fixed carbon content, calorific value, compressive strength, density, porosity, and SEM (Scanning Electron Microscope). The results showed that the briquette from the kernel of the palm kernel shell was optimal at a temperature of 550 ° C with a starch adhesive mixture of 7.5%, a pressure of 100 kg/cm², moisture content of 5.34%, an ash content of 5.81%, a substance content. Volatile amounted to 18.77%, 71.08% for fixed carbon, heating value 7125.86 cal/g. Density of 0.78, porosity of 0.04 and strength of 72.56 kg / cm².

scholarly journals PEMBUATAN BIOPELET DARI KAYU PUTIH DENGAN PENAMBAHAN GONDORUKEM SEBAGAI BAHAN BAKAR ALTERNATIF

2018 ◽  
Vol 2 (1) ◽  
pp. 91-100
Author(s):  
Sofia Mustamu ◽  
Gysberth Pattiruhu
Keyword(s):  
Renewable Energy ◽  
Moisture Content ◽  
Energy Content ◽  
Raw Materials ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Fixed Carbon

Biopelet is one of the renewable energy alternatives that have uniformity of size, shape, density, and energy content. The purpose of this study was to examine the characteristics of biopelet consisting of a mixture of cajeput and gondorukem, and to determine the composition of the raw materials that can produce a biopelet with the best quality. The compositions of a mixture in this research are as follow 95%:5%, 90%:10%, 80%:20%, 70%:30%, 60%:40%, 50%:50%, cajeput 100% and gondorukem 100%. The manufacture of biopelet used a 20 mesh of dust with the pressure of 526.4 kg/cm2  at a temperature of 200 ◦C for 15 minutes. Types of tests performed on biopelet include density, moisture content, volatile matter, ash content, carbon bonded, and calorific value. The results of the best quality of biopelet was in the percentage of cajeput and gondorukem was 70%:30%,  tests showed densities of biopelet 0,84 g/cm3, moisture content5,89%, ash content 2,42%, volatile matter 73,99%, fixed carbon 18,96%, and calorific value 5152 kkal/kg.

scholarly journals PENGARUH SUHU DAN KONSENTRASI PEREKAT TERHADAP KARAKTERISTIK BRIKET BIOARANG BERBAHAN BAKU TANDAN KOSONG KELAPA SAWIT DENGAN PROSES PIROLISIS

Konversi ◽  
2015 ◽  
Vol 4 (2) ◽  
pp. 16
Author(s):  
Yuli Ristianingsih ◽  
Ayuning Ulfa ◽  
Rachmi Syafitri K.S
Keyword(s):  
Solid Waste ◽  
Palm Oil ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Crude Palm Oil ◽  
Fixed Carbon ◽  
Heating Value ◽  
Empty Fruit Bunches ◽  
Rate Of Combustion

Abstrak-Tandan Kosong Kelapa Sawit merupakan limbah padat hasil produksi Crude Palm Oil (CPO). Setiap 1(satu) ton tandan buah segar dihasilkan 23% limbah padat. Limbah padat ini dapat di konversi menjadi bahan bakar pengganti minyak yaitu briket. Briket bioarang adalah bahan bakar padat yang dapat digunakan sebagai bahan bakar alternatif pengganti bahan bakar yang berasal dari fosil seperti minyak dan gas. Penelitian ini bertujuan untuk mengetahui pengaruh suhu pirolisis terhadap yield bioarang yang dihasilkan dan mengetahui pengaruh konsentrasi perekat kanji (5% w/w, 10% w/w, 15% w/w) terhadap karakteristik briket hasil penelitian (kadar air, volatile matter, kadar abu, fixed carbon, nilai kalor dan laju pembakaran). Penelitian dilakukan dengan metode pirolisis yaitu proses pembakaran bahan baku dalam reaktor pirolisis dengan menggunakan suhu yang tinggi dan tanpa atau dengan sedikit oksigen. Pirolisis dilakukan selama 2,5 jam dengan variasi suhu yaitu 350°C, 400°C, 450°C dan 500°C. Arang yang dihasilkan dicampur dengan perekat sesuai variasi dan dicetak menjadi briket. Briket kemudian dianalisa kadar air, kadar abu, kadar karbon, kadar zat terbang, nilai kalor dan laju pembakaran. Briket dengan yield tertinggi terdapat pada suhu 350°C sebesar 51,53% dan yield terendah pada suhu 500°C sebesar 26,03%. Briket hasil penelitian ini telah memenuhi standar mutu briket sebagai bahan bakar dilihat dari nilai kalor. Komposisi optimal antara perekat kanji dan arang TKKS hasil pirolisis yaitu pada 5%:95% yang menghasilkan nilai kalor terbesar yaitu 6748,15kal/g.  Kata kunci : Briket Bioarang, Pirolisis, Tandan Kosong Kelapa Sawit                Abstract-Palm Oil Empty Fruit Bunches are solid waste from Crude Palm Oil (CPO industry). For 1 ton of fresh fruit bunches produced 23% of solid waste. This solid waste can be converted into alternative energy that called briquettes. Briquettes are solid fuel that can be used as an alternative fuel replacement for fossil fuels such as oil and gas. This study aims to determine the effect of temperature on the yield generated briquettes and the effect of stach adhesive concentration (5, 10 and 15% wt) to briquettes characteristics (moisture content, volatile matter, ash content, fixed carbon, calorific value and the rate of combustion). In this reseacrh, two kilograms of palm oil empty fruit bunches was burned using pyrolisis reactor at different temperatur (350, 400, 450 and 5000C) for 2.5 hour. Charcoal produced was mixed with an adhesive in accordance variations and molded into briquettes. Briquettes then analyzed the water content, ash content, carbon content, volatile matter content, heating value and rate of combustion. The maximum yield of briquettes which was obtained in this research is 51.53% at temperature 3500C and the lowest yield at temperature of 500 ° C by 26.03%. Briquettes results of this study have met the quality standards of fuel briquettes as seen from the heating value. Optimal adhesive composition between starch and charcoal TKKS is 5%: 95% that generates highest calorific value about 6748.15kal/ g. Keywords: Briquette Bioarang, Pyrolysis, oil palm empty bunches

scholarly journals Pemanfaatan Limbah Kulit Kakao Menjadi Briket Arang sebagai Bahan Bakar Alternatif dengan Penambahan Ampas Buah Merah

2019 ◽  
Vol 13 (1) ◽  
pp. 57
Author(s):  
Syarifhidayahtullah Syarif ◽  
Rochim Bakti Cahyono ◽  
Muslikhin Hidayat
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Calorific Value ◽  
Ash Content ◽  
Fruit Pulp ◽  
Volatile Content ◽  
Fixed Carbon ◽  
Shell Waste ◽  
Cocoa Shell ◽  
Fixed Carbon Content

A B S T R A C TThe conversion of cocoa shell waste into char briquettes has been carried out through various methods. However, the product characteristics do not meet the SNI briquettes requirements. Therefore, it is necessary to improve process engineering by mixing cocoa peel waste with red fruit pulp to get char briquettes in order to improve quality of briquette products. This research was carried out through pyrolysis process with temperthwatures up to 500 oC and held for 4 hours. The research objective was to produce char briquettes from cacao pod shell waste with the addition of red fruit pulp and its characteristic test. The study was designed with 2 variables, namely independent variables in the form of char raw material powder that passed 50 mesh sieve, weight ratio of cocoa shell char powder and red fruit pulp char powder (100:0, 70:30, 50:50, 30:70, and 0%:100%), pressure (100 kg/cm2), 10% starch adhesive from raw materials, and briquette diameter of 40 mm. Whereas the dependent variables are the moisture content (%), volatile content (%), ash content (%), fixed carbon content (%), and calorific value (cal/g). The results showed that the process of pyrolysis of char briquettes waste cocoa shell with red fruit pulp can increase its calorific value. The best characteristics of briquette were obtained from mixed briquettes (composition of 30%:70%) with moisture content of 5.63%, volatile content of 18.65%, ash content of 9.45%, fixed carbon content of 66.27%, and calorific value of 6422 cal/g.A B S T R A KPemanfaatan limbah kulit buah kakao menjadi briket arang telah banyak dilakukan melalui berbagai metode tetapi belum memenuhi persyaratan SNI briket arang. Oleh karena itu, perlu diupayakan untuk mendapatkan briket arang yang memenuhi persyaratan SNI. Salah satunya dengan cara mencampurkan limbah kulit kakao dengan ampas buah merah karena ampas buah merah memiliki nilai kalor yang cukup tinggi. Penelitian ini dilakukan melalui proses pirolisis dengan suhu sampai dengan 500 oC  dan ditahan selama 4 jam. Tujuan penelitian untuk memproduksi briket arang dari limbah kulit buah kakao dengan penambahan ampas buah merah serta uji karakteristiknya. Penelitian dirancang dengan 2 variabel, yaitu variabel bebas (independent variable) berupa ukuran serbuk bahan baku arang yang lolos saringan  50 mesh, rasio massa campuran serbuk arang kulit kakao dengan serbuk arang ampas buah merah (100:0, 70:30, 50:50, 30:70, dan 0%:100%), tekanan pengempaan (100 kg/cm2), perekat kanji 10% dari bahan baku, dan diameter briket 40 mm. Variabel terikat (dependent variable) yang diukur yaitu kadar air (%), kadar zat mudah menguap (%), kadar abu (%), kadar karbon terikat (%), dan nilai kalor (kal/g). Hasil penelitian menunjukkan bahwa, dengan melalui proses pirolisis briket arang limbah kulit kakao dengan ampas buah merah dapat meningkatkan nilai kalor-nya. Karakteristik briket terbaik diperoleh dari briket komposisi campuran (30%:70%) dengan kadar air 5,63 %, kadar zat mudah menguap 18,65 %, kadar abu 9,45 %, kadar karbon terikat 66,27 %, dan nilai kalor 6422 kal/g.

scholarly journals THE EFFECT OF BINDER RATIO ON THE PHYSICAL AND COMBUSTION CHARACTERISTICS OF CARBONIZED RICE STALK BRIQUETTES

2020 ◽  
pp. 221-229
Author(s):  
Rapheal Ige ◽  
Elinge Ogala ◽  
Cosmos Moki ◽  
Abdulrahman Habeeb
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Hot Water ◽  
High Concentration ◽  
Fixed Carbon ◽  
Binder Ratio ◽  
Fixed Carbon Content

The selection or choice of agro-waste briquettes for domestic and industrial cottage applications depends on the fuel properties. In this study, the briquette was produced by carbonizing the rice stalk followed by crushing and sieving, the binder was prepared by dissolving the starch in hot water, then mixed with the sieved carbonized rice stalk and then the briquette was produced using the briquetting machine. Proximate analyses, viability, characteristics and combustion were determined to know the average composition of their constituents. From the results obtained it was observed that ash content, moisture content, after glow and ignition propagation decrease as the binder ratio increase while fixed carbon content, volatile matter, calorific value, density and compressive strength increase. The results of this work indicate that briquettes produced using high concentration of the binder would make good biomass fuels. However, it has a high moisture content of 25.00%, high ash content of 23.00%, moderate volatile matter of 44.80%, low fixed carbon content of 32.20%, moderate calorific value of 13.86 MJ/Kg and high density of 0.643g/cm3. The results obtained for all the parameters showed that rice stalks briquettes produced with high concentration of the binder (starch) had a better performance based on their combustion profile.

scholarly journals Production and Characterization of Coffee Husk Fuel Briquettes as an Alternative Energy Source

2022 ◽  
Vol 2022 ◽  
pp. 1-13
Author(s):  
Assefa Tesfaye ◽  
Fentahun Workie ◽  
Venkatesh S. Kumar
Keyword(s):  
Energy Source ◽  
Moisture Content ◽  
Alternative Energy ◽  
Calorific Value ◽  
Well Being ◽  
Ash Content ◽  
Biomass Energy ◽  
Fixed Carbon ◽  
Coffee Husk ◽  
Alternative Energy Source

Biomass energy accounts for more than 92 percent of overall energy consumption in Ethiopia. As a result, Ethiopia is one of the world’s most biomass-dependent countries. The high reliance on wood fuels and agricultural residues for fuel harms society’s social, economic, and environmental well-being. This study aims to create and test the quality of fuel briquettes made from the coffee husk. Also built and produced are a carboniser/charcoal kiln, a manually operated molder system, and a briquette stove for burning the manufactured briquette. The carboniser converts 15 kg of raw coffee husk into 6 kg of carbonised char in 25 minutes, and the manually operated briquette molder can press 30 kg per hour. The efficiency of converting raw coffee husk into carbonised char content was 40.12%. In the geological survey of Ethiopia, the geochemical laboratory directorate received triplicate samples of the fuel briquette charcoal for analysis. Moisture content, fixed carbon content, ash content, sulfur content, and calorific value were determined using a bomb calorimeter and a ceramic lining furnace. Physical properties of fuel briquettes ranged from 10.03% moisture content, 970 kg/m3 density, 81% fixed carbon, 5.15% ash content, 0% sulfur, and 30.54 Kcal/kg higher heating value, according to laboratory results. The results of the study revealed that the coffee husk fuel briquettes produced have more positive characteristics. Fuel briquettes were cost-effective and environmentally friendly and reduced deforestation compared to firewood. This study clearly shows that briquettes made from coffee husk could be used as an alternative energy source when this kind of waste is well managed.

scholarly journals PEMANFAATAN LIMBAH LUMPUR IPAL KAWASAN INDUSTRI DAN SERBUK GERGAJI KAYU MENJADI BRIKET

2019 ◽  
Vol 5 (1) ◽  
Author(s):  
Sissar Eka Bimantara ◽  
Euis Nurul Hidayah
Keyword(s):  
Moisture Content ◽  
Research Methodology ◽  
Calorific Value ◽  
Quality Standards ◽  
Ash Content ◽  
Heating Value ◽  
Wood Sawdust ◽  
Quality Testing ◽  
Heat Value

Lumpur IPAL pada Kawasan Industri sampai saat ini belum dapat dimanfaatkan dengan baik, pemanfaatan lumpur IPAL menjadi briket merupakan salah satu upaya untuk mengatasi permasalahan limbah lumpur IPAL. Tujuan penelitian ini adalah mengetahui lumpur IPAL dengan campuran serbuk gergaji kayu dapat dijadikan bahan bakar alternatif berupa briket, mengetahui pengaruh variasi lumpur IPAL dan serbuk gergaji kayu terhadap mutu briket berupa kadar abu, nilai kalor, kadar air , dan mengetahui komposisi terbaik antara lumpur IPAL dan serbuk gergaji kayu untuk menghasilkan nilai kalor optimum pada briket. Metodologi penelitian meliputi pengeringan bahan, karbonisasi bahan, penghalusan dan penyaringan bahan 20 mesh (841 µm), 40 mesh (420µm), dan 60 mesh (250 µm), pencetakan dan pengepresan briket, serta pengeringan briket. Selanjutnya dilakukan uji mutu briket, hasil analisis pada briket terbaik terdapat pada perbandingan 20 : 80 dengan menggunakan ayakan 60 mesh, memiliki nilai kalor 4366,8 kal/g, kadar air 1,26% dan kadar abu 1,32%. Nilai kalor pada briket masih belum memenuhi baku mutu dari SNI 4931 Tahun 2010, Minimnya nilai kalor yang dihasilkan bisa juga karena variabel perlakuan, dengan perbandingan yang dilakukan terhadap lumpur dan serbuk gergaji serta menggunakan ukuran ayakan yang berbeda. Kata Kunci : briket, lumpur IPAL, serbuk gergaji kayu. IPAL sludge in the Ngoro Persada Industry has yet to be utilized properly, utilizing IPAL sludge into briquettes is one of the efforts to solve this problem. The aim of this research was to determine the IPAL sludge with a mixture of wood sawdust can be used as an alternative fuel in the form of briquettes, to determine the effect of variations in IPAL sludge and wood sawdust on the quality of briquettes in the form of heat value, ash content and moisture content as well as knowing the best composition between IPAL sludge and wood sawdust to produce briquettes with the best heating value. The research methodology included material drying, carbonization of materials, refining and filtering of 20 mesh (841 μm), 40 mesh (420μm), and 60 mesh (250 μm), printing and pressing briquettes, and briquette drying. Furthermore, briquette quality testing was conducted, the results showed that the best briquettes were at a ratio of 20: 80 using 60 mesh sleve, having a heating value of 4366.8 cal / g, 1.26% moisture content and 1.32% ash content. The calorific value of briquettes still does not meet the quality standards of SNI 4931 of 2010, the lack of heat value produced can also be due to treatment variables, with the comparison carried out on sludge and wood sawdust and using different sieve sizes. Keywords: briquettes, IPAL sludge, wood sawdust.

scholarly journals The Characteristics of Bamboo Charcoal Derived from Bambusa vulgaris Schrad and Arundinaria gigantea (Walter) Muhl Growing in Different Types of Habitats

2018 ◽  
Vol 10 (1) ◽  
pp. 1-10
Author(s):  
Ratri Yuli Lestari, M.Env. ◽  
Dwi Harsono ◽  
Nazarni Rahmi
Keyword(s):  
Moisture Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Bamboo Charcoal ◽  
Fixed Carbon ◽  
Arundinaria Gigantea ◽  
Bambusa Vulgaris ◽  
Different Types ◽  
Different Altitudes

Altitude is one of the factors that affect the growth of bamboo. Bamboo species used in this study was Bambusa vulgaris and Arundinaria gigantea. The objectives of this study are to investigate the effect of altitude to the characteristics of bamboo charcoal harvested from three different altitudes (Lumpangi, Banjarbaru/Martapura, Marabahan). Parameters tested in this study were moisture content, ash content, volatile matter, fixed carbon and calorific value. The result showed that altitute significantly affected the characteristics of bamboo charcoal. Bamboo charcoal from Banjarbaru/Martapura had the best characteristics than the charcoal produced from other locations. The moisture content, ash content, volatile matter, fixed carbon and calorific value of B. vulgaris were 0.77 %; 3.49 %; 8.63 %; 87.11 % and 7,331.05 kal/g. The moisture content, ash content, volatile matter, fixed carbon and calorific value of A. gigantea were 0.19 %; 12.46 %; 4.48 %; 87.11 % and 6,640.69 kal/g, respectively.

scholarly journals Hasil Pengujian Proksimasi Dan Gas Buang Pada Briket Campuran Limbah Serutan Kayu, Sekam Padi Dan Bulu Ayam

2021 ◽  
Vol 14 (1) ◽  
pp. 33-39
Author(s):  
Muhamad Rizky Adipratama ◽  
Reza Setiawan ◽  
Najmudin Fauji
Keyword(s):  
Moisture Content ◽  
Rice Husk ◽  
Alternative Energy ◽  
Fossil Fuels ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Biomass Energy ◽  
Fixed Carbon ◽  
Wood Shavings

Biomass energy is one that can be used as an alternative energy as a substitute for fossil fuels and can also be useful for reducing environmental pollution due to increasing waste or waste. The manufacture of briquettes from chicken feather waste, wood shavings and rice husk waste aims to help deal with the problem of waste and use it as an alternative fuel. The making of briquettes is carried out by the process of drying the ingredients, charcoal, milling, sieving, kneading, printing, drying, proximate testing and measuring emissions on the briquettes. In this study, the composition of a mixture of chicken feathers (30%, 40%, 50%), wood shavings and rice husk (35%, 30%, 25%) was treated as well as particle sizes of 30 mesh and 60 mesh. The results of this study indicate that the lowest moisture content is in sample B2 of 4.5%. The lowest levels of volatile matters were in sample A1 of 37.4%. The lowest ash content was found in sample B3 at 10.8%. The highest fixed carbon was found in sample A3 at 45.1%. The highest calorific value (Gross Calorific Value) is found in the B3 sample of 5594 Kcal / Kg. And it has the highest CO, CO2, and HC emissions produced from the briquettes, namely 0.24%, 0.8%, 46 ppm. The properties of briquettes that have met SNI standards are moisture content, calorific value (except for sample A1), and the resulting emissions. And those that have not met SNI standards are the levels of volatile matter, ash content and fixed carbon. The resulting briquette can be used because the calorific value obtained is quiet high, which is above the specified standard of ≥ 5000 Kcal/Kg.

Sign in / Sign up

Export Citation Format

Share Document